Merge tag 'at91-defconfig-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig

AT91 defconfig for 5.12, part 2:

- only at91_dt_defconfig and sama5_defconfig modified
- update to match current options, unneeded options removed
- missing drivers added, some are on-SoC peripherals, some are helpers
- modify legacy ATAGS or DT options to match common usage

* tag 'at91-defconfig-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: configs: sama5_defconfig: add QSPI driver
  ARM: configs: at91_dt_defconfig: add ov7740 module
  ARM: configs: at91_dt_defconfig: add useful helper options
  ARM: configs: at91: DT/ATAG defconfig modifications
  ARM: configs: sama5_defconfig: update and remove unneeded options
  ARM: configs: at91: enable drivers for sam9x60

Link: https://lore.kernel.org/r/20210208115753.54730-1-nicolas.ferre@microchip.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add Quad SPI driver to the sama5 defconfig. This driver is needed for
sama5d2 SoC.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>

Add OV7740 as a module as it's useful testing camera sensors on
sam9x60ek for instance. Unify with sama5_defconfig as well.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>

Add GPIO, SPI and I2C options that were missing from the
at91_dt_defconfig whereas they were in sama5_defconfig. It unifies all
AT91 defconfigs with same set of useful options.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>

As all AT91 platforms are converted to DT for a long time, adapt the
defconfigs by:
- removing legacy CONFIG_ATAGS as a DT will always be provided;
- removing the CONFIG_ARM_APPENDED_DTB option on SAMA5 devices as the
  vast majority of systems will use a DT-aware bootloader on these
  devices.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>

Kconfig options are not present anymore or selected by default: remove
them from sama5_defconfig.
No change to kernel compilation expected.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>

Enable drivers for sam9x60/sam9x60-ek:
- shutdown controller
- CAN
- AT24 EEPROM (present on SAM9X60-EK)
- MCP23S08 (present on SAM9X60-EK)
- AES, TDES, SHA

And use "make savedefconfig".
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/1612518871-9311-1-git-send-email-claudiu.beznea@microchip.com

Merge tag 'imx-defconfig-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig

i.MX defconfig change for 5.12:

- Enable WM8962 support needed by imx8mn-beacon-kit.
- Enable PF8x00 support used by Boundary Nitrogen8M Mini SBC.
- Enable a few drivers for Librem 5 devkit support.
- Enable interconnect support for i.MX8MQ.
- Enable Broadcom BCM54140 PHY driver for Kontron K-Box A-230-LS.
- Enable RV3028 I2C RTC and PCA9532 driver support for phyBOARD-Pollux
  i.MX8MP.
- Enable RN5T618 PMIC driver support in imx_v6_v7_defconfig.

* tag 'imx-defconfig-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: defconfig: Enable PF8x00 as builtin
  arm64: defconfig: Enable vibra-pwm
  arm64: defconfig: Enable Broadcom BCM54140 PHY
  arm64: defconfig: Enable interconnect for imx8mq
  arm64: defconfig: Enable PCA9532 support
  arm64: defconfig: Enable rv3028 i2c rtc driver
  arm64: defconfig: Enable Librem 5 devkit components
  ARM: imx_v6_v7_defconfig: enable power driver of RN5T618 PMIC family
  arm64: defconfig: Enable WM8962

Link: https://lore.kernel.org/r/20210204120150.26186-6-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-defconfig-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig

Qualcomm ARM defconfig updates for 5.12

This enables various device drivers found on the newly introduced
Qualcomm SDX55 platform in the qcom_defconfig. Due to kernel image size
constraints the qcom_defconfig is used instead of multi_v7_defconfig,
for now.

* tag 'qcom-defconfig-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: qcom_defconfig: Enable Command DB driver
  ARM: qcom_defconfig: Enable RPMh power domain driver
  ARM: qcom_defconfig: Enable ARM PSCI support
  ARM: qcom_defconfig: Enable watchdog driver
  ARM: qcom_defconfig: Enable RPMh regulator
  ARM: qcom_defconfig: Enable ARM SMMU
  ARM: qcom_defconfig: Enable DWC3 controller and PHYs
  ARM: qcom_defconfig: Enable UBI file system
  ARM: qcom_defconfig: Enable MTD UBI driver
  ARM: qcom_defconfig: Enable SMEM partition parser
  ARM: qcom_defconfig: Enable SDX55 GCC driver
  ARM: qcom_defconfig: Enable SDX55 pinctrl driver
  ARM: qcom_defconfig: Enable RPMh drivers

Link: https://lore.kernel.org/r/20210204052236.388783-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-arm64-defconfig-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig

Qualcomm ARM64 defconfig updates for 5.12

This enables HID multitouch and TMPFS Posix ACL, for off-the-shelf
distro support on the Snapdragon laptops. It also enables display
clocks, audio configs and the LT9611UXC HDMI bridge for used on the
SM8250 and specifically RB5 board.

* tag 'qcom-arm64-defconfig-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: defconfig: Enable Qualcomm SM8250 audio config
  arm64: defconfig: enable Lontium LT9611UXC bridge driver
  arm64: defconfig: enable display clock controller on sm8250
  arm64: defconfig: Enable TMPFS Posix ACL
  arm64: defconfig: Enable HID multitouch

Link: https://lore.kernel.org/r/20210204051956.388355-1-bjorn.andersson@linaro.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Enable the RT5659 audio codec driver. Jetson AGX Xavier has RT5658 codec
which is compatible with this driver. This enables user to test external
audio.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Cc: Bard Liao <bardliao@realtek.com>

Merge tag 'amlogic-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/defconfig

ARM: multi_v7_defconfig: amlogic updtes for v5.12
- enable support for the ADC thermal sensor as module

* tag 'amlogic-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: multi_v7_defconfig: Enable support for the ADC thermal sensor

Link: https://lore.kernel.org/r/7hsg6d2bxg.fsf@baylibre.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.11-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/defconfig

- build PMIC wrapper as a module
- build DEVAPC as a module

* tag 'v5.11-next-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm64: configs: Support DEVAPC on MediaTek platforms
  arm64: configs: Support pwrap on Mediatek MT6779 platform

Link: https://lore.kernel.org/r/aa5c6673-f018-00d3-42da-46a4976d8ef7@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'arm-soc/for-5.12/defconfig-arm64' of https://github.com/Broadcom/stblinux into arm/defconfig

This pull request contains Broadcom ARM64-based SoCs defconfig updates for
5.12, please pull the following:

- Nicolas enables the NVMEM reserved memory driver to permit reading the
  Raspberry Pi's bootloader configuration from user-space

* tag 'arm-soc/for-5.12/defconfig-arm64' of https://github.com/Broadcom/stblinux:
  arm64: defconfig: Enable nvmem's rmem driver

Link: https://lore.kernel.org/r/20210131221721.685974-2-f.fainelli@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

This pull request contains Broadcom ARM-based SoCs defconfig updates for
5.12, please pull the following:

- Nicolas enables the NVMEM reserved memory driver to permit reading the
  Raspberry Pi's bootloader configuration from user-space

* tag 'arm-soc/for-5.12/defconfig' of https://github.com/Broadcom/stblinux:
  ARM: multi_v7_defconfig: Enable nvmem's rmem driver

Link: https://lore.kernel.org/r/20210131221721.685974-1-f.fainelli@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Support DEVAPC on MediaTek platforms by enabling CONFIG_MTK_DEVAPC.
Signed-off-by: Neal Liu <neal.liu@mediatek.com>
Link: https://lore.kernel.org/r/1608713092-26952-3-git-send-email-neal.liu@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Support pwrap on Mediatek MT6779 platform by enabling CONFIG_MTK_PMIC_WRAP.
Signed-off-by: Argus Lin <argus.lin@mediatek.com>
Link: https://lore.kernel.org/r/1609747703-27207-3-git-send-email-argus.lin@mediatek.comSigned-off-by: Matthias Brugger <matthias.bgg@gmail.com>

This driver is mandatory for the nitrogen8m mini board
when booting from the sdcard slot.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Merge tag 'tegra-for-5.12-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig

arm64: tegra: Default configuration changes for v5.12-rc1

Enables the Tegra SoC thermal driver that is used on various Tegra132
and Tegra210 platforms, as well as the Tegra audio graph driver that can
be used to enable audio support on Tegra210, Tegra186 and Tegra194.

* tag 'tegra-for-5.12-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: defconfig: Enable Tegra audio graph card driver
  arm64: defconfig: Enable Tegra SoC Thermal driver

Link: https://lore.kernel.org/r/20210129193254.3610492-6-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-5.12-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig

ARM: tegra: Default configuration changes for v5.12-rc1

Enables the Tegra SoC thermal driver on 32-bit platforms such as
Tegra124.

* tag 'tegra-for-5.12-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: config: Enable Tegra SoC Thermal driver

Link: https://lore.kernel.org/r/20210129193254.3610492-4-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Enable CEC support for STMicroelectronics as loadable module.
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20210129084842.29123-1-alexandre.torgue@foss.st.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The haptic motor for the Librem 5 uses this.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Enable NVMEM_RMEM as module to expose RPi4's bootloader configuration to
userspace
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Enable NVMEM_RMEM as module to expose RPi4's bootloader configuration to
userspace
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

It'll be used by the RPi4 family of boards to access its bootloader
configuration.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20210112142342.7290-1-nsaenzjulienne@suse.de

It'll be used by the RPi4 family of boards to access its bootloader
configuration.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20210112142342.7290-1-nsaenzjulienne@suse.de

32-bit Amlogic Meson platforms are using a special ADC channel to read
the SoC temperature. Enable the "generic ADC thermal" driver so this
data can be used to cool the SoC for example by reduing the maximum CPU
and GPU frequencies temporarily.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201221181306.904272-6-martin.blumenstingl@googlemail.com

Enable Command DB driver to query the shared system resources on
platforms using RPMh such as SDX55.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-14-manivannan.sadhasivam@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable RPMh power domain driver to support power-domains on platforms
like SDX55.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-13-manivannan.sadhasivam@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable ARM Power State Coordination Interface (PSCI) support on Qualcomm
platforms.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-12-manivannan.sadhasivam@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable watchdog driver for Qualcomm platforms.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-11-manivannan.sadhasivam@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable RPMh regulator for using with platforms like SDX55.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-10-manivannan.sadhasivam@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable ARM SMMU driver for using with platforms like SDX55.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-9-manivannan.sadhasivam@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable DWC3 controller, QMP PHY and SNPS HS PHY for using with platforms
like SDX55.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-8-manivannan.sadhasivam@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable UBI file system support.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-7-manivannan.sadhasivam@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable MTD UBI driver for using partitions on top of NAND flash in
platforms like SDX55.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-6-manivannan.sadhasivam@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable Qcom SMEM partition parser driver to make use of the NAND
partitions defined in Shared Memory (SMEM).
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-5-manivannan.sadhasivam@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable Qcom SDX55 GCC driver for clock support.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-4-manivannan.sadhasivam@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable the Qcom SDX55 pinctrl driver and also enable the PINCTRL_MSM
driver explicitly since it is not selected by default directly.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-3-manivannan.sadhasivam@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable Qcom RPMh drivers for using it in platforms like SDX55.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118053853.56224-2-manivannan.sadhasivam@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>