- 23 Oct, 2015 28 commits
-
-
Julien Grall authored
The PV network protocol is using 4KB page granularity. The goal of this patch is to allow a Linux using 64KB page granularity working as a network backend on a non-modified Xen. It's only necessary to adapt the ring size and break skb data in small chunk of 4KB. The rest of the code is relying on the grant table code. Signed-off-by:
Julien Grall <julien.grall@citrix.com> Reviewed-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
Julien Grall authored
The PV network protocol is using 4KB page granularity. The goal of this patch is to allow a Linux using 64KB page granularity using network device on a non-modified Xen. It's only necessary to adapt the ring size and break skb data in small chunk of 4KB. The rest of the code is relying on the grant table code. Note that we allocate a Linux page for each rx skb but only the first 4KB is used. We may improve the memory usage by extending the size of the rx skb. Signed-off-by:
Julien Grall <julien.grall@citrix.com> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
Julien Grall authored
The PV block protocol is using 4KB page granularity. The goal of this patch is to allow a Linux using 64KB page granularity behaving as a block backend on a non-modified Xen. It's only necessary to adapt the ring size and the number of request per indirect frames. The rest of the code is relying on the grant table code. Note that the grant table code is allocating a Linux page per grant which will result to waste 6OKB for every grant when Linux is using 64KB page granularity. This could be improved by sharing the page between multiple grants. Signed-off-by:
Julien Grall <julien.grall@citrix.com> Acked-by:
"Roger Pau Monné" <roger.pau@citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
Julien Grall authored
The PV block protocol is using 4KB page granularity. The goal of this patch is to allow a Linux using 64KB page granularity using block device on a non-modified Xen. The block API is using segment which should at least be the size of a Linux page. Therefore, the driver will have to break the page in chunk of 4K before giving the page to the backend. When breaking a 64KB segment in 4KB chunks, it is possible that some chunks are empty. As the PV protocol always require to have data in the chunk, we have to count the number of Xen page which will be in use and avoid sending empty chunks. Note that, a pre-defined number of grants are reserved before preparing the request. This pre-defined number is based on the number and the maximum size of the segments. If each segment contains a very small amount of data, the driver may reserve too many grants (16 grants is reserved per segment with 64KB page granularity). Furthermore, in the case of persistent grants we allocate one Linux page per grant although only the first 4KB of the page will be effectively in use. This could be improved by sharing the page with multiple grants. Signed-off-by:
Julien Grall <julien.grall@citrix.com> Acked-by:
Roger Pau Monné <roger.pau@citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
Julien Grall authored
The Xen interface is using 4KB page granularity. This means that each grant is 4KB. The current implementation allocates a Linux page per grant. On Linux using 64KB page granularity, only the first 4KB of the page will be used. We could decrease the memory wasted by sharing the page with multiple grant. It will require some care with the {Set,Clear}ForeignPage macro. Note that no changes has been made in the x86 code because both Linux and Xen will only use 4KB page granularity. Signed-off-by:
Julien Grall <julien.grall@citrix.com> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
Julien Grall authored
Only use the first 4KB of the page to store the events channel info. It means that we will waste 60KB every time we allocate page for: * control block: a page is allocating per CPU * event array: a page is allocating everytime we need to expand it I think we can reduce the memory waste for the 2 areas by: * control block: sharing between multiple vCPUs. Although it will require some bookkeeping in order to not free the page when the CPU goes offline and the other CPUs sharing the page still there * event array: always extend the array event by 64K (i.e 16 4K chunk). That would require more care when we fail to expand the event channel. Signed-off-by:
Julien Grall <julien.grall@citrix.com> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Stefano Stabellini <stefano.stabellini@citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
Julien Grall authored
For ARM64 guests, Linux is able to support either 64K or 4K page granularity. Although, the hypercall interface is always based on 4K page granularity. With 64K page granularity, a single page will be spread over multiple Xen frame. To avoid splitting the page into 4K frame, take advantage of the extent_order field to directly allocate/free chunk of the Linux page size. Note that PVMMU is only used for PV guest (which is x86) and the page granularity is always 4KB. Some BUILD_BUG_ON has been added to ensure that because the code has not been modified. Signed-off-by:
Julien Grall <julien.grall@citrix.com> Reviewed-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
Julien Grall authored
The console ring is always based on the page granularity of Xen. Signed-off-by:
Julien Grall <julien.grall@citrix.com> Reviewed-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
Julien Grall authored
All the ring (xenstore, and PV rings) are always based on the page granularity of Xen. Signed-off-by:
Julien Grall <julien.grall@citrix.com> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
Julien Grall authored
On ARM all dma-capable devices on a same platform may not be protected by an IOMMU. The DMA requests have to use the BFN (i.e MFN on ARM) in order to use correctly the device. While the DOM0 memory is allocated in a 1:1 fashion (PFN == MFN), grant mapping will screw this contiguous mapping. When Linux is using 64KB page granularitary, the page may be split accross multiple non-contiguous MFN (Xen is using 4KB page granularity). Therefore a DMA request will likely fail. Checking that a 64KB page is using contiguous MFN is tedious. For now, always says that biovec are not mergeable. Signed-off-by:
Julien Grall <julien.grall@citrix.com> Reviewed-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
Julien Grall authored
Prepare the code to support 64KB page granularity. The first implementation will use a full Linux page per indirect and persistent grant. When non-persistent grant is used, each page of a bio request may be split in multiple grant. Furthermore, the field page of the grant structure is only used to copy data from persistent grant or indirect grant. Avoid to set it for other use case as it will have no meaning given the page will be split in multiple grant. Provide 2 functions, to setup indirect grant, the other for bio page. Signed-off-by:
Julien Grall <julien.grall@citrix.com> Acked-by:
Roger Pau Monné <roger.pau@citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
Julien Grall authored
All the usage of the field pfn are done using the same idiom: pfn_to_page(grant->pfn) This will return always the same page. Store directly the page in the grant to clean up the code. Signed-off-by:
Julien Grall <julien.grall@citrix.com> Acked-by:
Roger Pau Monné <roger.pau@citrix.com> Reviewed-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
Julien Grall authored
Currently, blkif_queue_request has 2 distinct execution path: - Send a discard request - Send a read/write request The function is also allocating grants to use for generating the request. Although, this is only used for read/write request. Rather than having a function with 2 distinct execution path, separate the function in 2. This will also remove one level of tabulation. Signed-off-by:
Julien Grall <julien.grall@citrix.com> Reviewed-by:
Roger Pau Monné <roger.pau@citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
Julien Grall authored
Many PV drivers contain the idiom: pfn = page_to_gfn(...) /* Or similar */ gnttab_grant_foreign_access_ref Replace it by a new helper. Note that when Linux is using a different page granularity than Xen, the helper only gives access to the first 4KB grant. This is useful where drivers are allocating a full Linux page for each grant. Also include xen/interface/grant_table.h rather than xen/grant_table.h in asm/page.h for x86 to fix a compilation issue [1]. Only the former is useful in order to get the structure definition. [1] Interdependency between asm/page.h and xen/grant_table.h which result to page_mfn not being defined when necessary. Signed-off-by:
Julien Grall <julien.grall@citrix.com> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
Julien Grall authored
Currently, a grant is always based on the Xen page granularity (i.e 4KB). When Linux is using a different page granularity, a single page will be split between multiple grants. The new helpers will be in charge of splitting the Linux page into grants and call a function given by the caller on each grant. Also provide an helper to count the number of grants within a given contiguous region. Note that the x86/include/asm/xen/page.h is now including xen/interface/grant_table.h rather than xen/grant_table.h. It's necessary because xen/grant_table.h depends on asm/xen/page.h and will break the compilation. Furthermore, only definition in interface/grant_table.h is required. Signed-off-by:
Julien Grall <julien.grall@citrix.com> Reviewed-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
Julien Grall authored
The Xen hypercall interface is always using 4K page granularity on ARM and x86 architecture. With the incoming support of 64K page granularity for ARM64 guest, it won't be possible to re-use the Linux page definition in Xen drivers. Introduce Xen page definition helpers based on the Linux page definition. They have exactly the same name but prefixed with XEN_/xen_ prefix. Also modify xen_page_to_gfn to use new Xen page definition. Signed-off-by:
Julien Grall <julien.grall@citrix.com> Reviewed-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
Julien Grall authored
They are not used in common code expect in one place in balloon.c which is only compiled when Linux is using PV MMU. It's not the case on ARM. Rather than worrying how to handle the 64KB case, drop them. Signed-off-by:
Julien Grall <julien.grall@citrix.com> Reviewed-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
Julien Grall authored
The skb doesn't change within the function. Therefore it's only necessary to check if we need GSO once at the beginning. Signed-off-by:
Julien Grall <julien.grall@citrix.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com>
-
David Vrabel authored
Pages returned by alloc_xenballooned_pages() will be used for grant mapping which will call set_phys_to_machine() (in PV guests). Ballooned pages are set as INVALID_P2M_ENTRY in the p2m and thus may be using the (shared) missing tables and a subsequent set_phys_to_machine() will need to allocate new tables. Since the grant mapping may be done from a context that cannot sleep, the p2m entries must already be allocated. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Daniel Kiper <daniel.kiper@oracle.com>
-
David Vrabel authored
Rename alloc_p2m() to xen_alloc_p2m_entry() and export it. This is useful for ensuring that a p2m entry is allocated (i.e., not a shared missing or identity entry) so that subsequent set_phys_to_machine() calls will require no further allocations. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Daniel Kiper <daniel.kiper@oracle.com> --- v3: - Make xen_alloc_p2m_entry() a nop on auto-xlate guests.
-
David Vrabel authored
alloc_xenballooned_pages() is used to get ballooned pages to back foreign mappings etc. Instead of having to balloon out real pages, use (if supported) hotplugged memory. This makes more memory available to the guest and reduces fragmentation in the p2m. This is only enabled if the xen.balloon.hotplug_unpopulated sysctl is set to 1. This sysctl defaults to 0 in case the udev rules to automatically online hotplugged memory do not exist. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Daniel Kiper <daniel.kiper@oracle.com> --- v3: - Add xen.balloon.hotplug_unpopulated sysctl to enable use of hotplug for unpopulated pages.
-
David Vrabel authored
All users of alloc_xenballoon_pages() wanted low memory pages, so remove the option for high memory. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Daniel Kiper <daniel.kiper@oracle.com>
-
David Vrabel authored
Now that we track the total number of pages (included hotplugged regions), it is easy to determine if more memory needs to be hotplugged. Add a new BP_WAIT state to signal that the balloon process needs to wait until kicked by the memory add notifier (when the new section is onlined by userspace). Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Daniel Kiper <daniel.kiper@oracle.com> --- v3: - Return BP_WAIT if enough sections are already hotplugged. v2: - New BP_WAIT status after adding new memory sections.
-
David Vrabel authored
The stats used for memory hotplug make no sense and are fiddled with in odd ways. Remove them and introduce total_pages to track the total number of pages (both populated and unpopulated) including those within hotplugged regions (note that this includes not yet onlined pages). This will be used in a subsequent commit (xen/balloon: only hotplug additional memory if required) when deciding whether additional memory needs to be hotplugged. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Daniel Kiper <daniel.kiper@oracle.com>
-
David Vrabel authored
Instead of placing hotplugged memory at the end of RAM (which may conflict with PCI devices or reserved regions) use allocate_resource() to get a new, suitably aligned resource that does not conflict. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Daniel Kiper <daniel.kiper@oracle.com> --- v3: - Remove stale comment.
-
David Vrabel authored
During setup, discard RAM regions that are above the maximum reservation (instead of marking them as E820_UNUSABLE). This allows hotplug memory to be placed at these addresses. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Daniel Kiper <daniel.kiper@oracle.com>
-
David Vrabel authored
Commit 0bb599fd (xen: remove scratch frames for ballooned pages and m2p override) removed the use of the scratch page for ballooned out pages. Remove some left over function definitions. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Daniel Kiper <daniel.kiper@oracle.com>
-
David Vrabel authored
Add add_memory_resource() to add memory using an existing "System RAM" resource. This is useful if the memory region is being located by finding a free resource slot with allocate_resource(). Xen guests will make use of this in their balloon driver to hotplug arbitrary amounts of memory in response to toolstack requests. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Daniel Kiper <daniel.kiper@oracle.com> Reviewed-by:
Tang Chen <tangchen@cn.fujitsu.com>
-
- 18 Oct, 2015 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Here are some bugfixes for the I2C subsystem. Kieran found a flaw in the recently renewed wake irq handling. Mika handled a user bug report where the ACPI info turned out to be unusable. I updated MAINTAINERS so that such bug reports will sooner get to the right people. Geert pointed me to a problem of some i2c drivers regarding PM which I fixed" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348 MAINTAINERS: add maintainers for Synopsis Designware I2C drivers i2c: designware-platdrv: enable RuntimePM before registering to the core i2c: s3c2410: enable RuntimePM before registering to the core i2c: rcar: enable RuntimePM before registering to the core i2c: return probe deferred status on dev_pm_domain_attach
-
Mika Westerberg authored
ACPI SSCN/FMCN methods were originally added because then the platform can provide the most accurate HCNT/LCNT values to the driver. However, this seems not to be true for Dell Inspiron 7348 where using these causes the touchpad to fail in boot: i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: controller timed out The values received from ACPI are (in fast mode): HCNT: 72 LCNT: 160 this translates to following timings (input clock is 100MHz on Broadwell): tHIGH: 720 ns (spec min 600 ns) tLOW: 1600 ns (spec min 1300 ns) Bus period: 2920 ns (assuming 300 ns tf and tr) Bus speed: 342.5 kHz Both tHIGH and tLOW are within the I2C specification. The calculated values when ACPI parameters are not used are (in fast mode): HCNT: 87 LCNT: 159 which translates to: tHIGH: 870 ns (spec min 600 ns) tLOW: 1590 ns (spec min 1300 ns) Bus period 3060 ns (assuming 300 ns tf and tr) Bus speed 326.8 kHz These values are also within the I2C specification. Since both ACPI and calculated values meet the I2C specification timing requirements it is hard to say why the touchpad does not function properly with the ACPI values except that the bus speed is higher in this case (but still well below the max 400kHz). Solve this by adding DMI quirk to the driver that disables using ACPI parameters on this particulare machine. Reported-by:
Pavel Roskin <plroskin@gmail.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by:
Pavel Roskin <plroskin@gmail.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
-
- 17 Oct, 2015 3 commits
-
-
Linus Torvalds authored
Merge branches 'irq-urgent-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq/timer fixes from Thomas Gleixner: "irq: a fix for the new hierarchical MSI interrupt handling which unbreaks PCI=n configurations. timers: a fix for the new hrtimer clock offset update mechanism to ensure that the boot time offset is respected" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi: Do not use pci_msi_[un]mask_irq as default methods * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Increment clock_was_set_seq in timekeeping_init()
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: "Just two small fixups to ads7846 touchscreen controller driver and Cypress touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cyapa - fix the copy paste error on electrodes_rx value Input: ads7846 - correct the value got from SPI
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "Just one revert for Armada XP devices: the conversion to of_clk_get_parent_name() wasn't a direct translation, so we revert back to of_clk_get() + __clk_get_name(). We could make of_clk_get_parent_name() more robust, but that may have unintended side-effects, so we'll do that in the next version" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Partially revert "clk: mvebu: Convert to clk_hw based provider APIs"
-
- 16 Oct, 2015 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper fixes from Mike Snitzer: "Two DM target error path cleanup fixes (one for stable in DM thinp and one for a v4.3-rc5 thinko in DM snapshot)" * tag 'dm-4.3-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin: fix missing pool reference count decrement in pool_ctr error path dm snapshot persistent: fix missing cleanup in persistent_ctr error path
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "I have two more bug fixes for btrfs. My commit fixes a bug we hit last week at FB, a combination of lots of hard links and an admin command to resolve inode numbers. Dave is adding checks to make sure balance on current kernels ignores filters it doesn't understand. The penalty for being wrong is just doing more work (not crashing etc), but it's a good fix" * 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix use after free iterating extrefs btrfs: check unsupported filters in balance arguments
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
Pull Ceph fixes from Sage Weil: "Just two small items from Ilya: The first patch fixes the RBD readahead to grab full objects. The second fixes the write ops to prevent undue promotion when a cache tier is configured on the server side" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: use writefull op for object size writes rbd: set max_sectors explicitly
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management and ACPI fixes from Rafael Wysocki: "These fix two recent regressions (ACPICA, the generic power domains framework) and one crash that may happen on specific hardware supported since 4.1 (intel_pstate). Specifics: - Fix a regression introduced by a recent ACPICA cleanup that uncovered a latent bug (Lv Zheng). - Fix a recent regression in the generic power domains framework that may cause it to violate PM QoS latency constraints in some cases (Ulf Hansson). - Fix an intel_pstate driver crash on the Knights Landing chips that do not update the MPERF counter as often as expected by the driver which may result in a divide by 0 (Srinivas Pandruvada)" * tag 'pm+acpi-4.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Fix divide by zero on Knights Landing (KNL) ACPICA: Tables: Fix FADT dependency regression PM / Domains: Fix validation of latency constraints in genpd governor
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Nothing too crazy or exciting: - two MAINTAINERS entries that I didn't see the point in delaying. - one drm mst fix to stop sending uninitialised data to monitors - two amdgpu fixes - one radeon mst tiling fix - one vmwgfx regression fix - one virtio warning fix. I have found one locking problem that needs a bit of reorg to fix, but I'm not sure it's worth putting in -fixes as I don't think we've seen it hit in the real world ever, I just found it using the virtio-gpu driver when working on it. I'll possibly send it next week once I've time to discuss with Daniel" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/virtio: use %llu format string form atomic64_t MAINTAINERS: Add myself as maintainer for the gma500 driver MAINTAINERS: add a maintainer for the atmel-hlcdc DRM driver drm/amdgpu: Keep the pflip interrupts always enabled v7 drm/amdgpu: adjust default dispclk (v2) drm/dp/mst: make mst i2c transfer code more robust. drm/radeon: attach tile property to mst connector drm/vmwgfx: Fix kernel NULL pointer dereference on older hardware
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Re-enable CONFIG_SCSI_DH in our defconfigs - Remove unused os_area_db_id_video_mode - cxl: fix leak of IRQ names in cxl_free_afu_irqs() from Andrew - cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API from Andrew - cxl: fix leak of ctx->mapping when releasing kernel API contexts from Andrew - cxl: Workaround malformed pcie packets on some cards from Philippe - cxl: Fix number of allocated pages in SPA from Christophe Lombard - Fix checkstop in native_hpte_clear() with lockdep from Cyril - Panic on unhandled Machine Check on powernv from Daniel - selftests/powerpc: Fix build failure of load_unaligned_zeropad test * tag 'powerpc-4.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Fix build failure of load_unaligned_zeropad test powerpc/powernv: Panic on unhandled Machine Check powerpc: Fix checkstop in native_hpte_clear() with lockdep cxl: Fix number of allocated pages in SPA cxl: Workaround malformed pcie packets on some cards cxl: fix leak of ctx->mapping when releasing kernel API contexts cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API cxl: fix leak of IRQ names in cxl_free_afu_irqs() powerpc/ps3: Remove unused os_area_db_id_video_mode powerpc/configs: Re-enable CONFIG_SCSI_DH
-