- 21 Apr, 2020 28 commits
-
-
Fabio Estevam authored
Improve the documentation by providing examples on how to test camera capture on imx6q-sabresd via v4l2-ctl and Gstreamer. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by: Steve Longerbeam<slongerbeam@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Fabio Estevam authored
In order to improve the documentation, provide the OV5640 MIPI module part number that is used on the imx6q-sabresd board. Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
-
Fabio Estevam authored
The current example for imx6q-sabresd is for a direct conversion pipeline. Provide an extra example using unprocessed video capture for completeness. Signed-off-by:
-
Fabio Estevam authored
The current instructions for imx6q-sabresd do not lead to functional capture on OV5640 MIPI CSI-2. The reason for this, as explained by Steve Longerbeam, is that OV5640 by default transmits on virtual channel 0, not channel 1 as is given in the instructions. Adapt the instructions to use virtual channel 0 so that a working camera setup can be achieved on imx6q-sabresd. Also, since we are using an IC direct conversion pipeline, improve the example by demonstrating colorspace and scaling. Signed-off-by:
-
Maheshwar Ajja authored
Add H264 profile "Contrained High" and H264 levels "5.2", "6.0", "6.1" and "6.2". Signed-off-by:
Maheshwar Ajja <majja@codeaurora.org> Signed-off-by:
-
Maheshwar Ajja authored
Add H264 profile "Contrained High" and H264 levels "5.2", "6.0", "6.1" and "6.2". Signed-off-by:
-
Fabio Estevam authored
Currently v4l2-compliance tool returns the following output: Compliance test for imx-media-csc-s device /dev/video8: Driver Info: Driver name : imx-media-csc-s Card type : imx-media-csc-scaler Bus info : platform:imx-media-csc-scaler The driver name string is limited to 16 characters, so provide a shorter name in order to get a better output. While at it, use the same shorter name for driver, card and platform. Signed-off-by: -
Colin Ian King authored
The variable status is being assigned a value that is never read. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Colin Ian King authored
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
Hsin-Yi Wang authored
aliases property name must include only lowercase and '-'. Fix in dts and driver. Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by:
Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by:
Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by:
-
Colin Ian King authored
The pointer 'common' is being assigned with a value that is never read, the assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
Laurent Pinchart authored
The imx_media_mbus_fmt_to_pix_fmt() and imx_media_mbus_fmt_to_ipu_image() functions do not need to modify their mbus argument, and imx_media_ipu_image_to_mbus_fmt() does not need to modify its ipu_image argument. Make them const. [slongerbeam@gmail.com: Constified mbus arg to imx_media_mbus_fmt_to_ipu_image(), and ipu_image arg to imx_media_ipu_image_to_mbus_fmt(), as well] Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Rename the format lookup and enumeration functions according to their usage: - Rename imx_media_(find|enum)_format() to *_pixel_format() to explicitly state on what formats the functions operate. This aligns the naming scheme with the media bus and IPU format functions that already end with *_mbus_format() and *_ipu_formats(). - Rename all enumeration functions to pluralize 'formats' at the end, as they enumerate multiple formats. Signed-off-by:
-
Steve Longerbeam authored
To make the code easier to follow, split up find_format() into separate search functions for pixel formats and media-bus codes, and inline find_format() into the exported functions imx_media_find_format() and imx_media_find_mbus_format(). Do the equivalent for enum_format(). Also add comment blocks for the exported find|enum functions. The convenience functions imx_media_find_ipu_format() and imx_media_enum_ipu_format() can now be made inline and moved to imx-media.h. Signed-off-by:
-
Laurent Pinchart authored
The imx_media_pixfmt structures include a codes member that stores media bus codes as a fixed array of 4 integers. The functions dealing with the imx_media_pixfmt structures assume that the array of codes is terminated by a 0 element. This mechanism is fragile, as demonstrated by several instances of the structure containing 4 non-zero codes. Fix this by turning the array into a pointer, and providing an IMX_BUS_FMTS macro to initialize the codes member with a guaranteed 0 element at the end. [Fixed a NULL deref of the codes pointer in a couple places] [Added more comments for the struct imx_media_pixfmt members, including a bold NOTE! for future developers that codes pointer is NULL for the in-memory-only formats] Signed-off-by:
-
Steve Longerbeam authored
Add a PIXFMT_SEL_IPU selection flag, to select only the IPU-internal pixel formats, and move the single-entry IPU-internal pixel format arrays into pixel_formats[]. imx_media_find_ipu_format() and imx_media_enum_ipu_format() can now simply call find_format() and enum_format(). The RGB32 format is both an IPU-internal format, and an in-memory format via idmac channels that is supported by the IPUv3 driver, so it appears twice in pixel_formats[], one with ipufmt=false for the in-memory format, and again with ipufmt=true for the IPU-internal format. Signed-off-by:
-
Steve Longerbeam authored
After the introduction of the CS_SEL_BAYER flag, the "codespace" pixel format selection enumeration wording no longer makes sense (and even before, when selecting between YUV or RGB formats, "codespace" was a misuse of the term). Rename - 'enum codespace_sel' to 'enum imx_pixfmt_sel' - CS_SEL_* to PIXFMT_SEL_* - local vars named cs_sel to fmt_sel or just sel No functional changes. Signed-off-by:
-
Steve Longerbeam authored
- imx_media_capture_device_register() needs to use CS_SEL_ANY when finding the format from the attached source subdevice, because the source can be a CSI which supports bayer, and the CSI may have selected a bayer format when it registered. - Likewise, imx_media_init_mbus_fmt() is called from the CSI, so the function may be passed a bayer code. Use CS_SEL_ANY when locating the format. Signed-off-by:
-
Laurent Pinchart authored
The format lookup (and enumeration) functions take a boolean flag to tell if Bayer formats should be considered. This leads to hard to read lines such as return enum_format(fourcc, NULL, index, cs_sel, true, false); where the boolean parameters can easily be mixed. To make the code clearer, add a CS_SEL_BAYER flag that can be passed through the codespace_sel parameter of the lookup functions to replace the bool parameter. [slongerbeam@gmail.com: Instead of declaring CS_SEL_ANY as a bitfield containing only CS_SEL_YUV | CS_SEL_RGB, declare CS_SEL_ANY as all of the above (YUV, RGB, BAYER). A new enum is declared for the YUV | RGB selection as CS_SEL_YUV_RGB, and that is used by sub-devices that don't support BAYER and only allow selecting and enumerating YUV or RGB encodings. CS_SEL_ANY is now only used by the CSI sub-devices and the attached capture interfaces, since only those devices support BAYER formats.] Signed-off-by:
-
Laurent Pinchart authored
The init_mbus_colorimetry() function is small and used in a single place. The code becomes easier to follow if it gets inline in its caller. Do so. Signed-off-by:
-
Philipp Zabel authored
Iterate over all media bus formats, not just over the first format in each imx_media_pixfmt entry. Before: $ v4l2-ctl -d $(media-ctl -e ipu1_csi0) --list-subdev-mbus-codes 0 ioctl: VIDIOC_SUBDEV_ENUM_MBUS_CODE (pad=0) 0x2006: MEDIA_BUS_FMT_UYVY8_2X8 0x2008: MEDIA_BUS_FMT_YUYV8_2X8 0x1008: MEDIA_BUS_FMT_RGB565_2X8_LE 0x100a: MEDIA_BUS_FMT_RGB888_1X24 0x100d: MEDIA_BUS_FMT_ARGB8888_1X32 0x3001: MEDIA_BUS_FMT_SBGGR8_1X8 0x3013: MEDIA_BUS_FMT_SGBRG8_1X8 0x3002: MEDIA_BUS_FMT_SGRBG8_1X8 0x3014: MEDIA_BUS_FMT_SRGGB8_1X8 0x3007: MEDIA_BUS_FMT_SBGGR10_1X10 0x300e: MEDIA_BUS_FMT_SGBRG10_1X10 0x300a: MEDIA_BUS_FMT_SGRBG10_1X10 0x300f: MEDIA_BUS_FMT_SRGGB10_1X10 0x2001: MEDIA_BUS_FMT_Y8_1X8 0x200a: MEDIA_BUS_FMT_Y10_1X10 After: $ v4l2-ctl -d $(media-ctl -e ipu1_csi0) --list-subdev-mbus-codes 0 ioctl: VIDIOC_SUBDEV_ENUM_MBUS_CODE (pad=0) 0x2006: MEDIA_BUS_FMT_UYVY8_2X8 0x200f: MEDIA_BUS_FMT_UYVY8_1X16 0x2008: MEDIA_BUS_FMT_YUYV8_2X8 0x2011: MEDIA_BUS_FMT_YUYV8_1X16 0x1008: MEDIA_BUS_FMT_RGB565_2X8_LE 0x100a: MEDIA_BUS_FMT_RGB888_1X24 0x100c: MEDIA_BUS_FMT_RGB888_2X12_LE 0x100d: MEDIA_BUS_FMT_ARGB8888_1X32 0x3001: MEDIA_BUS_FMT_SBGGR8_1X8 0x3013: MEDIA_BUS_FMT_SGBRG8_1X8 0x3002: MEDIA_BUS_FMT_SGRBG8_1X8 0x3014: MEDIA_BUS_FMT_SRGGB8_1X8 0x3007: MEDIA_BUS_FMT_SBGGR10_1X10 0x3008: MEDIA_BUS_FMT_SBGGR12_1X12 0x3019: MEDIA_BUS_FMT_SBGGR14_1X14 0x301d: MEDIA_BUS_FMT_SBGGR16_1X16 0x300e: MEDIA_BUS_FMT_SGBRG10_1X10 0x3010: MEDIA_BUS_FMT_SGBRG12_1X12 0x301a: MEDIA_BUS_FMT_SGBRG14_1X14 0x301e: MEDIA_BUS_FMT_SGBRG16_1X16 0x300a: MEDIA_BUS_FMT_SGRBG10_1X10 0x3011: MEDIA_BUS_FMT_SGRBG12_1X12 0x301b: MEDIA_BUS_FMT_SGRBG14_1X14 0x301f: MEDIA_BUS_FMT_SGRBG16_1X16 0x300f: MEDIA_BUS_FMT_SRGGB10_1X10 0x3012: MEDIA_BUS_FMT_SRGGB12_1X12 0x301c: MEDIA_BUS_FMT_SRGGB14_1X14 0x3020: MEDIA_BUS_FMT_SRGGB16_1X16 0x2001: MEDIA_BUS_FMT_Y8_1X8 0x200a: MEDIA_BUS_FMT_Y10_1X10 0x2013: MEDIA_BUS_FMT_Y12_1X12 [laurent.pinchart@ideasonboard.com: Decrement index to replace loop counter k] [laurent.pinchart@ideasonboard.com: Return directly from within the loops] Fixes: e1302912 ("[media] media: Add i.MX media core driver") Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
Merge yuv_formats and rgb_formats into a single array. Always loop over all entries, skipping those that do not match the requested search criteria. This simplifies the code, lets us get rid of the manual counting of array entries, and stops accidentally ignoring some non-mbus RGB formats. Before: $ v4l2-ctl -d /dev/video14 --list-formats-out ioctl: VIDIOC_ENUM_FMT Type: Video Output [0]: 'UYVY' (UYVY 4:2:2) [1]: 'YUYV' (YUYV 4:2:2) [2]: 'YU12' (Planar YUV 4:2:0) [3]: 'YV12' (Planar YVU 4:2:0) [4]: '422P' (Planar YUV 4:2:2) [5]: 'NV12' (Y/CbCr 4:2:0) [6]: 'NV16' (Y/CbCr 4:2:2) [7]: 'RGBP' (16-bit RGB 5-6-5) [8]: 'RGB3' (24-bit RGB 8-8-8) [9]: 'BX24' (32-bit XRGB 8-8-8-8) After: $ v4l2-ctl -d /dev/video14 --list-formats-out ioctl: VIDIOC_ENUM_FMT Type: Video Output [0]: 'UYVY' (UYVY 4:2:2) [1]: 'YUYV' (YUYV 4:2:2) [2]: 'YU12' (Planar YUV 4:2:0) [3]: 'YV12' (Planar YVU 4:2:0) [4]: '422P' (Planar YUV 4:2:2) [5]: 'NV12' (Y/CbCr 4:2:0) [6]: 'NV16' (Y/CbCr 4:2:2) [7]: 'RGBP' (16-bit RGB 5-6-5) [8]: 'RGB3' (24-bit RGB 8-8-8) [9]: 'BGR3' (24-bit BGR 8-8-8) [10]: 'BX24' (32-bit XRGB 8-8-8-8) [11]: 'XR24' (32-bit BGRX 8-8-8-8) [12]: 'RX24' (32-bit XBGR 8-8-8-8) [13]: 'XB24' (32-bit RGBX 8-8-8-8) Tested on a imx6q-sabresd. [laurent.pinchart@ideasonboard.com: Make loop counters unsigned] [laurent.pinchart@ideasonboard.com: Decrement index instead of adding a counter] [laurent.pinchart@ideasonboard.com: Return directly from within loop instead of breaking] [slongerbeam@gmail.com: Fix colorspace comparison error] Fixes: e1302912 ("[media] media: Add i.MX media core driver") Signed-off-by:
-
Guru Das Srinagesh authored
Since the PWM framework is switching struct pwm_state.period's datatype to u64, prepare for this transition by using DIV_ROUND_CLOSEST_ULL to handle a 64-bit dividend. Cc: Richard Fontana <rfontana@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Allison Randal <allison@lohutok.net> Signed-off-by:
Guru Das Srinagesh <gurus@codeaurora.org> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Christophe JAILLET authored
Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'. While at it, change the log level from 'err' to 'debug'. Fixes: e6089fec ("media: m88ds3103: Add support for ds3103b demod") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Sean Young authored
This makes it possible to declare dvb_usb_device_properties const. Signed-off-by:
-
Colin Ian King authored
Currently when i2c transfers fail the error return -EREMOTEIO is assigned to err but then later overwritten when the tuner attach call is made. Fix this by returning early with the error return code -EREMOTEIO on i2c transfer failure errors. If the transfer fails, an uninitialized value will be read from b2. Addresses-Coverity: ("Unused value") Fixes: fbfee868 ("V4L/DVB (5651): Dibusb-mb: convert pll handling to properly use dvb-pll") Signed-off-by: -
Sean Young authored
If the kernel is built without e.g. the imon IR decoder, the protocols sysfs file still show the protocol as available. If user-space tries to enable this decoder, the kernel will report an error: $ echo +imon > /sys/class/rc/rc0/protocols [ 57.693033] rc_core: Loaded IR protocol module ir-imon-decoder, but protocol imon still not available Ensuring that unavailable protocols are not advertised, ensures that users space knows it is not available, and a BPF based IR decoder can be loaded instead. This supports the case when no kernel-based codec needs to be compiled in, and every IR decoder can be BPF based. Signed-off-by:
-
Sean Young authored
The first element of the key array is not used. Remove it, and along with it a uninitialized memory read. This should fix the rc debug message. Link: https://www.spinics.net/lists/kernel/msg3374861.htmlSuggested-by:
Phong Tran <tranmanphong@gmail.com> Signed-off-by:
-
- 20 Apr, 2020 3 commits
-
-
Mauro Carvalho Chehab authored
When built with: CONFIG_USB=m CONFIG_VIDEO_USBVISION=y It causes ld errors: ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_write_reg_irq': usbvision-core.c:(.text+0x8a4): undefined reference to `usb_submit_urb' ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_isoc_irq': usbvision-core.c:(.text+0x2ee8): undefined reference to `usb_submit_urb' ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_read_reg': usbvision-core.c:(.text+0x30ad): undefined reference to `usb_control_msg' ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_write_reg': usbvision-core.c:(.text+0x3178): undefined reference to `usb_control_msg' ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_set_output': usbvision-core.c:(.text+0x344e): undefined reference to `usb_control_msg' ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_set_input': usbvision-core.c:(.text+0x3b9b): undefined reference to `usb_control_msg' ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_setup': usbvision-core.c:(.text+0x4009): undefined reference to `usb_control_msg' ld: drivers/staging/media/usbvision/usbvision-core.o:usbvision-core.c:(.text+0x417f): more undefined references to `usb_control_msg' follow ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_set_alternate': usbvision-core.c:(.text+0x4518): undefined reference to `usb_set_interface' ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_init_isoc': usbvision-core.c:(.text+0x4673): undefined reference to `usb_alloc_urb' ld: usbvision-core.c:(.text+0x46a5): undefined reference to `usb_alloc_coherent' ld: usbvision-core.c:(.text+0x4765): undefined reference to `usb_submit_urb' ld: drivers/staging/media/usbvision/usbvision-core.o: in function `usbvision_stop_isoc': usbvision-core.c:(.text+0x4837): undefined reference to `usb_kill_urb' ld: usbvision-core.c:(.text+0x485f): undefined reference to `usb_free_coherent' ld: usbvision-core.c:(.text+0x4874): undefined reference to `usb_free_urb' ld: usbvision-core.c:(.text+0x48f1): undefined reference to `usb_set_interface' ld: drivers/staging/media/usbvision/usbvision-video.o: in function `usbvision_release': usbvision-video.c:(.text+0x1a8a): undefined reference to `usb_free_urb' ld: drivers/staging/media/usbvision/usbvision-video.o: in function `usbvision_disconnect': usbvision-video.c:(.text+0x1b74): undefined reference to `usb_put_dev' ld: drivers/staging/media/usbvision/usbvision-video.o: in function `usbvision_radio_close': usbvision-video.c:(.text+0x1c89): undefined reference to `usb_set_interface' ld: drivers/staging/media/usbvision/usbvision-video.o: in function `usbvision_probe': usbvision-video.c:(.text+0x1e4b): undefined reference to `usb_get_dev' ld: usbvision-video.c:(.text+0x20e1): undefined reference to `usb_alloc_urb' ld: usbvision-video.c:(.text+0x2797): undefined reference to `usb_put_dev' ld: drivers/staging/media/usbvision/usbvision-video.o: in function `usbvision_exit': usbvision-video.c:(.exit.text+0x37): undefined reference to `usb_deregister' ld: drivers/staging/media/usbvision/usbvision-video.o: in function `usbvision_init': usbvision-video.c:(.init.text+0xf9): undefined reference to `usb_register_driver' ld: drivers/staging/media/usbvision/usbvision-i2c.o: in function `usbvision_i2c_write': usbvision-i2c.c:(.text+0x2f4): undefined reference to `usb_control_msg' Reported-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
building it with a random config causes a warning: WARNING: unmet direct dependencies detected for PHY_ROCKCHIP_DPHY_RX0 Depends on [n]: STAGING [=y] && STAGING_MEDIA [=y] && MEDIA_SUPPORT [=y] && (ARCH_ROCKCHIP || COMPILE_TEST [=y]) && OF [=n] Selected by [y]: - VIDEO_ROCKCHIP_ISP1 [=y] && STAGING [=y] && STAGING_MEDIA [=y] && MEDIA_SUPPORT [=y] && VIDEO_V4L2 [=y] && (ARCH_ROCKCHIP || COMPILE_TEST [=y]) Reported-by:
-
Mauro Carvalho Chehab authored
Linux 5.7-rc2 * tag 'v5.7-rc2': (331 commits) Linux 5.7-rc2 mm: Fix MREMAP_DONTUNMAP accounting on VMA merge xattr.h: Replace zero-length array with flexible-array member uapi: linux: fiemap.h: Replace zero-length array with flexible-array member uapi: linux: dlm_device.h: Replace zero-length array with flexible-array member tpm_eventlog.h: Replace zero-length array with flexible-array member ti_wilink_st.h: Replace zero-length array with flexible-array member swap.h: Replace zero-length array with flexible-array member skbuff.h: Replace zero-length array with flexible-array member sched: topology.h: Replace zero-length array with flexible-array member rslib.h: Replace zero-length array with flexible-array member rio.h: Replace zero-length array with flexible-array member posix_acl.h: Replace zero-length array with flexible-array member platform_data: wilco-ec.h: Replace zero-length array with flexible-array member memcontrol.h: Replace zero-length array with flexible-array member list_lru.h: Replace zero-length array with flexible-array member lib: cpu_rmap: Replace zero-length array with flexible-array member irq.h: Replace zero-length array with flexible-array member ihex.h: Replace zero-length array with flexible-array member igmp.h: Replace zero-length array with flexible-array member ...
-
- 19 Apr, 2020 9 commits
-
-
Linus Torvalds authored
-
Brian Geffon authored
When remapping a mapping where a portion of a VMA is remapped into another portion of the VMA it can cause the VMA to become split. During the copy_vma operation the VMA can actually be remerged if it's an anonymous VMA whose pages have not yet been faulted. This isn't normally a problem because at the end of the remap the original portion is unmapped causing it to become split again. However, MREMAP_DONTUNMAP leaves that original portion in place which means that the VMA which was split and then remerged is not actually split at the end of the mremap. This patch fixes a bug where we don't detect that the VMAs got remerged and we end up putting back VM_ACCOUNT on the next mapping which is completely unreleated. When that next mapping is unmapped it results in incorrectly unaccounting for the memory which was never accounted, and eventually we will underflow on the memory comittment. There is also another issue which is similar, we're currently accouting for the number of pages in the new_vma but that's wrong. We need to account for the length of the remap operation as that's all that is being added. If there was a mapping already at that location its comittment would have been adjusted as part of the munmap at the start of the mremap. A really simple repro can be seen in: https://gist.github.com/bgaff/e101ce99da7d9a8c60acc641d07f312c Fixes: e346b381 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Brian Geffon <bgeffon@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "Two build fixes for a couple clk drivers and a fix for the Unisoc serial clk where we want to keep it on for earlycon" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sprd: don't gate uart console clock clk: mmp2: fix link error without mmp2 clk: asm9260: fix __clk_hw_register_fixed_rate_with_accuracy typo
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 and objtool fixes from Thomas Gleixner: "A set of fixes for x86 and objtool: objtool: - Ignore the double UD2 which is emitted in BUG() when CONFIG_UBSAN_TRAP is enabled. - Support clang non-section symbols in objtool ORC dump - Fix switch table detection in .text.unlikely - Make the BP scratch register warning more robust. x86: - Increase microcode maximum patch size for AMD to cope with new CPUs which have a larger patch size. - Fix a crash in the resource control filesystem when the removal of the default resource group is attempted. - Preserve Code and Data Prioritization enabled state accross CPU hotplug. - Update split lock cpu matching to use the new X86_MATCH macros. - Change the split lock enumeration as Intel finaly decided that the IA32_CORE_CAPABILITIES bits are not architectural contrary to what the SDM claims. !@#%$^! - Add Tremont CPU models to the split lock detection cpu match. - Add a missing static attribute to make sparse happy" * tag 'x86-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/split_lock: Add Tremont family CPU models x86/split_lock: Bits in IA32_CORE_CAPABILITIES are not architectural x86/resctrl: Preserve CDP enable over CPU hotplug x86/resctrl: Fix invalid attempt at removing the default resource group x86/split_lock: Update to use X86_MATCH_INTEL_FAM6_MODEL() x86/umip: Make umip_insns static x86/microcode/AMD: Increase microcode PATCH_MAX_SIZE objtool: Make BP scratch register warning more robust objtool: Fix switch table detection in .text.unlikely objtool: Support Clang non-section symbols in ORC generation objtool: Support Clang non-section symbols in ORC dump objtool: Fix CONFIG_UBSAN_TRAP unreachable warnings -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull time namespace fix from Thomas Gleixner: "An update for the proc interface of time namespaces: Use symbolic names instead of clockid numbers. The usability nuisance of numbers was noticed by Michael when polishing the man page" * tag 'timers-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: proc, time/namespace: Show clock symbolic names in /proc/pid/timens_offsets
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling fixes and updates from Thomas Gleixner: - Fix the header line of perf stat output for '--metric-only --per-socket' - Fix the python build with clang - The usual tools UAPI header synchronization * tag 'perf-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools headers: Synchronize linux/bits.h with the kernel sources tools headers: Adopt verbatim copy of compiletime_assert() from kernel sources tools headers: Update x86's syscall_64.tbl with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Update tools's copy of drm.h headers tools headers kvm: Sync linux/kvm.h with the kernel sources tools headers UAPI: Sync linux/fscrypt.h with the kernel sources tools include UAPI: Sync linux/vhost.h with the kernel sources tools arch x86: Sync asm/cpufeatures.h with the kernel sources tools headers UAPI: Sync linux/mman.h with the kernel tools headers UAPI: Sync sched.h with the kernel tools headers: Update linux/vdso.h and grab a copy of vdso/const.h perf stat: Fix no metric header if --per-socket and --metric-only set perf python: Check if clang supports -fno-semantic-interposition tools arch x86: Sync the msr-index.h copy with the kernel sources
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A set of fixes/updates for the interrupt subsystem: - Remove setup_irq() and remove_irq(). All users have been converted so remove them before new users surface. - A set of bugfixes for various interrupt chip drivers - Add a few missing static attributes to address sparse warnings" * tag 'irq-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-bcm7038-l1: Make bcm7038_l1_of_init() static irqchip/irq-mvebu-icu: Make legacy_bindings static irqchip/meson-gpio: Fix HARDIRQ-safe -> HARDIRQ-unsafe lock order irqchip/sifive-plic: Fix maximum priority threshold value irqchip/ti-sci-inta: Fix processing of masked irqs irqchip/mbigen: Free msi_desc on device teardown irqchip/gic-v4.1: Update effective affinity of virtual SGIs irqchip/gic-v4.1: Add support for VPENDBASER's Dirty+Valid signaling genirq: Remove setup_irq() and remove_irq() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "Two fixes for the scheduler: - Work around an uninitialized variable warning where GCC can't figure it out. - Allow 'isolcpus=' to skip unknown subparameters so that older kernels work with the commandline of a newer kernel. Improve the error output while at it" * tag 'sched-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/vtime: Work around an unitialized variable warning sched/isolation: Allow "isolcpus=" to skip unknown sub-parameters -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RCU fix from Thomas Gleixner: "A single bugfix for RCU to prevent taking a lock in NMI context" * tag 'core-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Don't acquire lock in NMI handler in rcu_nmi_enter_common()
-
