A stream may depend on multiple managers/buses, e.g. for the multiple
amplifier case. It's incorrect to use bus->dev in this case.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230322035524.1509029-2-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add pm_prepare callback and System level pm ops support for
AMD SoundWire manager driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Mastan Katragadda <Mastan.Katragadda@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/lkml/20230310162554.699766-9-Vijendar.Mukunda@amd.com
Link: https://lore.kernel.org/r/20230321050901.115439-9-Vijendar.Mukunda@amd.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add wake enable interrupt support for both the SoundWire manager
instances.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Mastan Katragadda <Mastan.Katragadda@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/lkml/20230227154801.50319-8-Vijendar.Mukunda@amd.com
Link: https://lore.kernel.org/r/20230321050901.115439-8-Vijendar.Mukunda@amd.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add support for runtime pm ops for AMD SoundWire manager driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Mastan Katragadda <Mastan.Katragadda@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/lkml/20230227154801.50319-7-Vijendar.Mukunda@amd.com
Link: https://lore.kernel.org/r/20230321050901.115439-7-Vijendar.Mukunda@amd.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add support for handling SoundWire manager interrupts.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Mastan Katragadda <Mastan.Katragadda@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/lkml/20230227154801.50319-6-Vijendar.Mukunda@amd.com
Link: https://lore.kernel.org/r/20230321050901.115439-6-Vijendar.Mukunda@amd.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Enable build for SoundWire manager driver for AMD platforms.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/lkml/20230220100418.76754-5-Vijendar.Mukunda@amd.com
Link: https://lore.kernel.org/r/20230321050901.115439-5-Vijendar.Mukunda@amd.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Register dai ops for SoundWire manager instances.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/lkml/20230227154801.50319-4-Vijendar.Mukunda@amd.com
Link: https://lore.kernel.org/r/20230321050901.115439-4-Vijendar.Mukunda@amd.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

AMD ACP(v6.x) IP block has two SoundWire manager devices.
Add support for
  - Manager driver probe & remove sequence
  - Helper functions to enable/disable interrupts,
    Initialize sdw manager, enable sdw pads
  - Manager driver sdw_master_ops & port_ops callbacks
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/lkml/20230310162554.699766-3-Vijendar.Mukunda@amd.com
Link: https://lore.kernel.org/r/20230321050901.115439-3-Vijendar.Mukunda@amd.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Export sdw_compute_slave_ports() function to use it in another
soundwire manager module.
Move sdw_transport_data structure to bus header file to export
sdw_compute_slave_ports() function.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/lkml/20230201165944.3169125-1-Vijendar.Mukunda@amd.com
Link: https://lore.kernel.org/r/20230321050901.115439-2-Vijendar.Mukunda@amd.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The _sdw_prepare_stream function just returns the error code when
compute_params callback failed.
The cumulative bus bandwidth will keep the value and won't be decreased
by sdw_deprepare_stream function.
We should restore the value of cumulative bus bandwidth when
compute_params callback failed.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230316013041.1008003-1-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Replace the call to sdw_ch_mask_to_ch() with a call to hweight32().

sdw_ch_mask_to_ch() is counting the number of set bits. The hweight()
family of functions already do this, and they have an advantage of
using a bit-counting instruction if it is available on the target CPU.
This also fixes a potential infinite loop bug in the implementation of
sdw_ch_mask_to_ch().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230315145051.2299822-1-rf@opensource.cirrus.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

There are two issues related to the number of ports coming from
Devicetree when exceeding in total QCOM_SDW_MAX_PORTS.  Both lead to
incorrect memory accesses:
1. With DTS having too big value of input or output ports, the driver,
   when copying port parameters from local/stack arrays into 'pconfig'
   array in 'struct qcom_swrm_ctrl', will iterate over their sizes.

2. If DTS also has too many parameters for these ports (e.g.
   qcom,ports-sinterval-low), the driver will overflow buffers on the
   stack when reading these properties from DTS.

Add a sanity check so incorrect DTS will not cause kernel memory
corruption.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230222144412.237832-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use a define instead of hard-coded register values for Soundwire
hardware version number, because it is a bit easier to read and allows
to drop explaining comment.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230222144412.237832-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

According to the comment and to downstream sources, the
SWRM_CONTINUE_EXEC_ON_CMD_IGNORE in SWRM_CMD_FIFO_CFG_ADDR register
should be set for v1.5.1 and newer, so fix the >= operator.

Fixes: 542d3491 ("soundwire: qcom: set continue execution flag for ignored commands")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230222140343.188691-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

The latest Cadence IP moves MCP_CMD_BASE and MCP_CMD_RESP to the
IP_MCP_CMD_BASE and IP_MCP_CMD_RESP registers located in different
area and accessed with a fixed offset.

Unlike other patches, the fields are not renamed to avoid a very
invasive and low-value set of changes.

For existing solutions, this is an iso-functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314015410.487311-17-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The latest Cadence IP splits the MCP_CMDCTRL fields in two registers:
MCP_CMDCTRL and IP_MCP_CMDCTRL. Rename the relevant fields and change
the access methods used for those fields.

In practice we only use the Parity error insertion in IP_CMD_CTRL.

For existing solutions, this is an iso-functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314015410.487311-16-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The latest Cadence IP splits the MCP_CONTROL fields in two registers:
MCP_CONTROL and IP_MCP_CONTROL. Rename the relevant fields and change
the access methods used for those fields.

For existing solutions, this is an iso-functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314015410.487311-15-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The latest Cadence IP splits the MCP_CONFIG fields in two registers:
MCP_CONFIG and IP_MCP_CONFIG. Rename the relevant fields and change
the access methods used for those fields.

For existing solutions, this is an iso-functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314015410.487311-14-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The latest Cadence IP splits some of the existing registers into two,
separated by a fixed offset. The bitfields themselves remain at the
same position, so we can use new helpers to dynamically add the fixed
offset.

For example, the existing MCP_CONFIG is now split in two with
MCP_CONFIG and IP_MCP_CONFIG (the naming comes directly from the
design document).

This patch adds helpers to access registers with the IP_ prefix. The
addition of the 'ip' prefix for helpers, registers and bitfields is
intentional to help reviewers spot any mistake.

For existing solutions, the offset is exactly zero so there's no
functional change - the MCP_CONFIG and IP_MCP_CONFIG are aliased to
the same address.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314015410.487311-13-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

This field is not used, and its definition is not aligned with the
hardware specification.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314015410.487311-12-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

No functionality change, just moving the routines to a common file so
that they can be used for new hardware.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314015410.487311-11-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

If we add one more callback, we can have common bank switch sequences
between old and new hardware: the only difference is where the CMDSYNC
register is located.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314015410.487311-10-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Now that the bus start/stop/clock_stop sequences use the ops, we can
move them to a different file to reuse them.

Note that we could in theory remove the abstraction for all those
sequences and directly call the functions in intel_auxdevice.c. To
allow for more flexibility and have means to special-case new
platforms, we decided to keep the abstraction. If in time it becomes
clear there is no benefit the abstraction will be simplified.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314015410.487311-9-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

There was no benefit to using the existing abstraction, but since we
are going to move the code make sure we do use the ops.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314015410.487311-8-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The bus start/stop sequences can be reused between platforms if we add
a couple of new callbacks. In following patches the code will be moved to
a shared file.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314015410.487311-7-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

In the existing code, the SHIM_SYNC::SYNC_GO bit is set, and the code
waits for it to return to zero.

That second wait part is just wrong: the SYNC_GO bit is *write-only* so
there's no way to know if it's cleared by hardware. The code works
because the value for a read-only bit is zero, but that's really just
luck.

Simplify the sequence to a plain read-modify-write.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314015410.487311-6-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

PDM is supported in the hardware but never enabled: there are no known
PDM-based devices. We can directly call the PCM helper.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314015410.487311-5-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

This is not relevant and not aligned with hardware definitions. In
addition, we've tested higher resolution formats so this is ignored at
a higher level.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314015410.487311-4-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The PDIs don't really have a notion of rates and formats, only
channels are relevant.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314015410.487311-3-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Prepare for reused for addition of new hardware
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314015410.487311-2-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Same DSDT problem as the HP Omen 16-k0005TX, except rt1316 amp is on
link2.

Link: https://github.com/thesofproject/linux/issues/4088Signed-off-by: Eugene Huang <eugene.huang99@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314090618.498716-1-yung-chuan.liao@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Commit aa47a7c2 ("lib/cpumask: deprecate nr_cpumask_bits") resulted
in the cpumask operations potentially becoming hugely less efficient,
because suddenly the cpumask was always considered to be variable-sized.

The optimization was then later added back in a limited form by commit
6f9c07be ("lib/cpumask: add FORCE_NR_CPUS config option"), but that
FORCE_NR_CPUS option is not useful in a generic kernel and more of a
special case for embedded situations with fixed hardware.

Instead, just re-introduce the optimization, with some changes.

Instead of depending on CPUMASK_OFFSTACK being false, and then always
using the full constant cpumask width, this introduces three different
cpumask "sizes":

 - the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids.

   This is used for situations where we should use the exact size.

 - the "small" size (small_cpumask_bits) is the NR_CPUS constant if it
   fits in a single word and the bitmap operations thus end up able
   to trigger the "small_const_nbits()" optimizations.

   This is used for the operations that have optimized single-word
   cases that get inlined, notably the bit find and scanning functions.

 - the "large" size (large_cpumask_bits) is the NR_CPUS constant if it
   is an sufficiently small constant that makes simple "copy" and
   "clear" operations more efficient.

   This is arbitrarily set at four words or less.

As a an example of this situation, without this fixed size optimization,
cpumask_clear() will generate code like

        movl    nr_cpu_ids(%rip), %edx
        addq    $63, %rdx
        shrq    $3, %rdx
        andl    $-8, %edx
        callq   memset@PLT

on x86-64, because it would calculate the "exact" number of longwords
that need to be cleared.

In contrast, with this patch, using a MAX_CPU of 64 (which is quite a
reasonable value to use), the above becomes a single

	movq $0,cpumask

instruction instead, because instead of caring to figure out exactly how
many CPU's the system has, it just knows that the cpumask will be a
single word and can just clear it all.

Note that this does end up tightening the rules a bit from the original
version in another way: operations that set bits in the cpumask are now
limited to the actual nr_cpu_ids limit, whereas we used to do the
nr_cpumask_bits thing almost everywhere in the cpumask code.

But if you just clear bits, or scan for bits, we can use the simpler
compile-time constants.

In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()'
which were not useful, and which fundamentally have to be limited to
'nr_cpu_ids'.  Better remove them now than have somebody introduce use
of them later.

Of course, on x86-64 with MAXSMP there is no sane small compile-time
constant for the cpumask sizes, and we end up using the actual CPU bits,
and will generate the above kind of horrors regardless.  Please don't
use MAXSMP unless you really expect to have machines with thousands of
cores.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull crypto fix from Herbert Xu:
 "Fix a regression in the caam driver"

* tag 'v6.3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: caam - Fix edesc/iv ordering mixup

Pull x86 updates from Thomas Gleixner:
 "A small set of updates for x86:

   - Return -EIO instead of success when the certificate buffer for SEV
     guests is not large enough

   - Allow STIPB to be enabled with legacy IBSR. Legacy IBRS is cleared
     on return to userspace for performance reasons, but the leaves user
     space vulnerable to cross-thread attacks which STIBP prevents.
     Update the documentation accordingly"

* tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  virt/sev-guest: Return -EIO if certificate buffer is not large enough
  Documentation/hw-vuln: Document the interaction between IBRS and STIBP
  x86/speculation: Allow enabling STIBP with legacy IBRS

Pull irq updates from Thomas Gleixner:
 "A set of updates for the interrupt susbsystem:

   - Prevent possible NULL pointer derefences in
     irq_data_get_affinity_mask() and irq_domain_create_hierarchy()

   - Take the per device MSI lock before invoking code which relies on
     it being hold

   - Make sure that MSI descriptors are unreferenced before freeing
     them. This was overlooked when the platform MSI code was converted
     to use core infrastructure and results in a fals positive warning

   - Remove dead code in the MSI subsystem

   - Clarify the documentation for pci_msix_free_irq()

   - More kobj_type constification"

* tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced
  genirq/msi: Drop dead domain name assignment
  irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy()
  genirq/irqdesc: Make kobj_type structures constant
  PCI/MSI: Clarify usage of pci_msix_free_irq()
  genirq/msi: Take the per-device MSI lock before validating the control structure
  genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()

Pull vfs update from Al Viro:
 "Adding Christian Brauner as VFS co-maintainer"

* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Adding VFS co-maintainer

Pull VM_FAULT_RETRY fixes from Al Viro:
 "Some of the page fault handlers do not deal with the following case
  correctly:

   - handle_mm_fault() has returned VM_FAULT_RETRY

   - there is a pending fatal signal

   - fault had happened in kernel mode

  Correct action in such case is not "return unconditionally" - fatal
  signals are handled only upon return to userland and something like
  copy_to_user() would end up retrying the faulting instruction and
  triggering the same fault again and again.

  What we need to do in such case is to make the caller to treat that as
  failed uaccess attempt - handle exception if there is an exception
  handler for faulting instruction or oops if there isn't one.

  Over the years some architectures had been fixed and now are handling
  that case properly; some still do not. This series should fix the
  remaining ones.

  Status:

   - m68k, riscv, hexagon, parisc: tested/acked by maintainers.

   - alpha, sparc32, sparc64: tested locally - bug has been reproduced
     on the unpatched kernel and verified to be fixed by this series.

   - ia64, microblaze, nios2, openrisc: build, but otherwise completely
     untested"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  openrisc: fix livelock in uaccess
  nios2: fix livelock in uaccess
  microblaze: fix livelock in uaccess
  ia64: fix livelock in uaccess
  sparc: fix livelock in uaccess
  alpha: fix livelock in uaccess
  parisc: fix livelock in uaccess
  hexagon: fix livelock in uaccess
  riscv: fix livelock in uaccess
  m68k: fix livelock in uaccess

include/linux/compiler-intel.h had no update in the past 3 years.

We often forget about the third C compiler to build the kernel.

For example, commit a0a12c3e ("asm goto: eradicate CC_HAS_ASM_GOTO")
only mentioned GCC and Clang.

init/Kconfig defines CC_IS_GCC and CC_IS_CLANG but not CC_IS_ICC,
and nobody has reported any issue.

I guess the Intel Compiler support is broken, and nobody is caring
about it.

Harald Arnesen pointed out ICC (classic Intel C/C++ compiler) is
deprecated:

    $ icc -v
    icc: remark #10441: The Intel(R) C++ Compiler Classic (ICC) is
    deprecated and will be removed from product release in the second half
    of 2023. The Intel(R) oneAPI DPC++/C++ Compiler (ICX) is the recommended
    compiler moving forward. Please transition to use this compiler. Use
    '-diag-disable=10441' to disable this message.
    icc version 2021.7.0 (gcc version 12.1.0 compatibility)

Arnd Bergmann provided a link to the article, "Intel C/C++ compilers
complete adoption of LLVM".

lib/zstd/common/compiler.h and lib/zstd/compress/zstd_fast.c were kept
untouched for better sync with https://github.com/facebook/zstd

Link: https://www.intel.com/content/www/us/en/developer/articles/technical/adoption-of-llvm-complete-icx.htmlSigned-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>