- 17 Dec, 2018 5 commits
-
-
Yong Zhi authored
Add IPU3-specific meta formats for processing parameters and 3A statistics. V4L2_META_FMT_IPU3_PARAMS V4L2_META_FMT_IPU3_STAT_3A Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Rajmohan Mani authored
This patch adds the details about the IPU3 Imaging Unit driver (both CIO2 and IMGU). Signed-off-by:
Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by:
-
Sakari Ailus authored
The firmware binary is located under "intel" directory in the linux-firmware repository. Reflect this in the driver. Signed-off-by:
-
Sakari Ailus authored
Address a few false positive compiler warnings related to uninitialised variables. While at it, use bool where bool is needed and %u to print an unsigned integer. Signed-off-by:
-
Bingbu Cao authored
This patch adds support to run dual pipes simultaneously. A private ioctl to configure the pipe mode (video or still) is also implemented. IPU3 hardware supports a maximum of 2 streams per pipe. With the support of dual pipes, more than 2 stream outputs can be achieved. This helps to support advanced camera features like Continuous View Finder (CVF) and Snapshot During Video(SDV). Extend ipu3 IMGU driver to support dual pipes 1. Extend current IMGU device to contain 2 groups of video nodes and 2 subdevs 2. Extend current css to support 2 pipeline and make CSS APIs to support 2 pipe 3. Add a v4l2 ctrl to allow user to specify the mode of the pipe 4. Check media pipeline link status to get enabled pipes Signed-off-by:Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
Tian Shu Qiu <tian.shu.qiu@intel.com> Signed-off-by:
-
- 14 Dec, 2018 15 commits
-
-
Yong Zhi authored
These meta formats are used on Intel IPU3 ImgU video queues to carry 3A statistics and ISP pipeline parameters. V4L2_META_FMT_IPU3_3A V4L2_META_FMT_IPU3_PARAMS Signed-off-by:
Chao C Li <chao.c.li@intel.com> Signed-off-by:
-
Yong Zhi authored
This patch adds support for the Intel IPU v3 as found on Skylake and Kaby Lake SoCs. The driver glues v4l2, css(camera sub system) and other pieces together to perform its functions, it also loads the IPU3 firmware binary as part of its initialization. Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Yong Zhi authored
Implement video driver that utilizes v4l2, vb2 queue support and media controller APIs. The driver exposes single subdevice and six nodes. Signed-off-by:
-
Yong Zhi authored
This provides helper library to be used by v4l2 level to program imaging pipelines and control the streaming. Signed-off-by:
-
Yong Zhi authored
This patch implements the functions to initialize and configure IPU3 h/w such as clock, irq and power. Signed-off-by:
-
Yong Zhi authored
A collection of routines that are mainly used to calculate the parameters for accelerator cluster. Signed-off-by:
-
Yong Zhi authored
This adds coeff, config parameters etc const definitions for IPU3 programming. Signed-off-by:
-
Yong Zhi authored
Introduce functions to load and install ImgU FW blobs. Signed-off-by:
-
Yong Zhi authored
The pools are used to store previous parameters set by user with the parameter queue. Due to pipelining, there needs to be multiple sets (up to four) of parameters which are queued in a host-to-sp queue. [mchehab@kernel.org: fixed two minor issues on comments: a space before tab and a typo: "vaid" -> "valid"] Signed-off-by:
-
Tomasz Figa authored
This driver uses IOVA space for buffer mapping through IPU3 MMU to transfer data between imaging pipelines and system DDR. Signed-off-by:
-
Tomasz Figa authored
This driver translates IO virtual address to physical address based on two levels page tables. Signed-off-by:
-
Yong Zhi authored
This add all the structs of IPU3 firmware ABI. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Yong Zhi authored
Add macros and enums used for IPU3 firmware interface. Signed-off-by:
-
Sakari Ailus authored
Document the interface for metadata output, including V4L2_BUF_TYPE_META_OUTPUT buffer type and V4L2_CAP_META_OUTPUT capability bits. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by:
-
Sakari Ailus authored
The V4L2_BUF_TYPE_META_OUTPUT mirrors the V4L2_BUF_TYPE_META_CAPTURE with the exception that it is an OUTPUT type. The use case for this is to pass buffers to the device that are not image data but metadata. The formats, just as the metadata capture formats, are typically device specific and highly structured. Signed-off-by:
-
- 12 Dec, 2018 3 commits
-
-
Ondrej Jirman authored
When parallel bus is used and data-active is being parsed, incorrect flags are cleared. Clear the correct flag bits. Fixes: e9be1b86 (media: v4l: fwnode: Use default parallel flags). Cc: stable@vger.kernel.org # for Kernel 4.20 Signed-off-by:
Ondrej Jirman <megous@megous.com> Signed-off-by:
-
Eddie James authored
The Video Engine (VE) embedded in the Aspeed AST2400 and AST2500 SOCs can capture and compress video data from digital or analog sources. With the Aspeed chip acting a service processor, the Video Engine can capture the host processor graphics output. Add a V4L2 driver to capture video data and compress it to JPEG images. Make the video frames available through the V4L2 streaming interface. Signed-off-by:
Eddie James <eajames@linux.ibm.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Eddie James authored
Document the bindings. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 07 Dec, 2018 17 commits
-
-
Helen Fornazier authored
If link is disabled, media_entity_remote_pad returns NULL, causing a NULL pointer deference. Ignore links that are not enabled instead. Signed-off-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Tomasz Figa authored
Currently v4l2_device_register_subdev_nodes() does not initialize the dev_parent field of the video_device structs it creates for subdevices being registered. This leads to __video_register_device() falling back to the parent device of associated v4l2_device struct, which often does not match the physical device the subdevice is registered for. Due to the problem above, the links between real devices and v4l-subdev nodes cannot be obtained from sysfs, which might be confusing for the userspace trying to identify the hardware. Fix this by initializing the dev_parent field of the video_device struct with the value of dev field of the v4l2_subdev struct. In case of subdevices without a parent struct device, the field will be NULL and the old behavior will be preserved by the semantics of __video_register_device(). Signed-off-by:
-
Wen Yang authored
kmemdup has implemented the function that kmalloc() + memcpy(). We prefer to kmemdup rather than code opened implementation. This issue was detected with the help of coccinelle. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> CC: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> CC: linux-kernel@vger.kernel.org Signed-off-by:
-
Mauro Carvalho Chehab authored
As complained by gcc: drivers/staging/media/rockchip/vpu/rk3288_vpu_hw_jpeg_enc.c: In function 'rk3288_vpu_jpeg_enc_set_qtable': drivers/staging/media/rockchip/vpu/rk3288_vpu_hw_jpeg_enc.c:70:10: warning: variable 'chroma_qtable_p' set but not used [-Wunused-but-set-variable] __be32 *chroma_qtable_p; ^~~~~~~~~~~~~~~ drivers/staging/media/rockchip/vpu/rk3288_vpu_hw_jpeg_enc.c:69:10: warning: variable 'luma_qtable_p' set but not used [-Wunused-but-set-variable] __be32 *luma_qtable_p; ^~~~~~~~~~~~~ drivers/staging/media/rockchip/vpu/rk3399_vpu_hw_jpeg_enc.c: In function 'rk3399_vpu_jpeg_enc_set_qtable': drivers/staging/media/rockchip/vpu/rk3399_vpu_hw_jpeg_enc.c:101:10: warning: variable 'chroma_qtable_p' set but not used [-Wunused-but-set-variable] __be32 *chroma_qtable_p; ^~~~~~~~~~~~~~~ drivers/staging/media/rockchip/vpu/rk3399_vpu_hw_jpeg_enc.c:100:10: warning: variable 'luma_qtable_p' set but not used [-Wunused-but-set-variable] __be32 *luma_qtable_p; ^~~~~~~~~~~~~ drivers/staging/media/rockchip/vpu/rockchip_vpu_enc.c: In function 'rockchip_vpu_queue_setup': drivers/staging/media/rockchip/vpu/rockchip_vpu_enc.c:522:33: warning: variable 'vpu_fmt' set but not used [-Wunused-but-set-variable] const struct rockchip_vpu_fmt *vpu_fmt; ^~~~~~~ drivers/staging/media/rockchip/vpu/rockchip_vpu_enc.c: In function 'rockchip_vpu_buf_prepare': drivers/staging/media/rockchip/vpu/rockchip_vpu_enc.c:560:33: warning: variable 'vpu_fmt' set but not used [-Wunused-but-set-variable] const struct rockchip_vpu_fmt *vpu_fmt; ^~~~~~~ Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
A common mistake is to assume that initializing a var with: struct foo f = { 0 }; Would initialize a zeroed struct. Actually, what this does is to initialize the first element of the struct to zero. According to C99 Standard 6.7.8.21: "If there are fewer initializers in a brace-enclosed list than there are elements or members of an aggregate, or fewer characters in a string literal used to initialize an array of known size than there are elements in the array, the remainder of the aggregate shall be initialized implicitly the same as objects that have static storage duration." So, in practice, it could zero the entire struct, but, if the first element is not an integer, it will produce warnings: drivers/staging/media/sunxi/cedrus/cedrus.c:drivers/staging/media/sunxi/cedrus/cedrus.c:78:49: warning: Using plain integer as NULL pointer drivers/staging/media/sunxi/cedrus/cedrus_dec.c:drivers/staging/media/sunxi/cedrus/cedrus_dec.c:29:35: warning: Using plain integer as NULL pointer As the right initialization would be, instead: struct foo f = { NULL }; Another way to initialize it with gcc is to use: struct foo f = {}; That seems to be a gcc extension, but clang also does the right thing, and that's a clean way for doing it. Anyway, I decided to check upstream what's the most commonly pattern. The "= {}" pattern has about 2000 entries: $ git grep -E "=\s*\{\s*\}"|wc -l 1951 The standard-C compliant pattern has about 2500 entries: $ git grep -E "=\s*\{\s*NULL\s*\}"|wc -l 137 $ git grep -E "=\s*\{\s*0\s*\}"|wc -l 2323 Meaning that developers have split options on that. So, let's opt to the simpler form. Signed-off-by:Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
As warned by smatch: drivers/staging/media/sunxi/cedrus/cedrus.c: drivers/staging/media/sunxi/cedrus/cedrus.c:93 cedrus_init_ctrls() error: potential null dereference 'ctx->ctrls'. (kzalloc returns null) While here, remove the memset(), as kzalloc() already zeroes the struct. Signed-off-by:
-
Paul Kocialkowski authored
Add the necessary compatible for supporting the A64 SoC along with a description of the capabilities of this variant. Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Paul Kocialkowski authored
Add the necessary compatible for supporting the H5 SoC along with a description of the capabilities of this variant. Signed-off-by:
-
Paul Kocialkowski authored
This introduces two new compatibles for the cedrus driver, for the A64 and H5 platforms. Signed-off-by:
-
Matt Ranostay authored
Not all future supported video chips will always have power management support, and so it is important to check before calling set_power() is defined. Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Akinobu Mita authored
AMG88xx has a register for setting operating mode. This adds support runtime PM by changing the operating mode. The instruction for changing sleep mode to normal mode is from the reference specifications. https://docid81hrs3j1.cloudfront.net/medialibrary/2017/11/PANA-S-A0002141979-1.pdfReviewed-by:
-
Rob Herring authored
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For instances using of_node_cmp, this has the side effect of now using case sensitive comparisons. This should not matter for any FDT based system which this is. Cc: Steve Longerbeam <slongerbeam@gmail.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: devel@driverdev.osuosl.org Signed-off-by:
-
Luca Ceresoli authored
Control events can be subscribed and received by the user. Therefore drivers that support controls must expose the V4L2_SUBDEV_FL_HAS_EVENTS flag. [As discussed in https://lkml.org/lkml/2018/11/27/637] Reported-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
-
Gabriel Francisco Mandaji authored
Simulate a more precise timestamp by calculating it based on the current framerate. Signed-off-by:
Gabriel Francisco Mandaji <gfmandaji@gmail.com> Signed-off-by:
-
Sergei Shtylyov authored
Add the R8A77980 SoC support to the R-Car VIN driver. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Sergei Shtylyov authored
Add the R-Car V3H (AKA R8A77980) SoC support to the R-Car CSI2 driver. Signed-off-by:
-
Rob Herring authored
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Hyun Kwon <hyun.kwon@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Reviewed-by:
Benoit Parrot <bparrot@ti.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
