- 17 Jun, 2021 25 commits
-
-
Ilias Stamatis authored
Calculate the TSC offset and multiplier on nested transitions and expose the TSC scaling feature to L1. Signed-off-by:
Ilias Stamatis <ilstam@amazon.com> Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210526184418.28881-11-ilstam@amazon.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Ilias Stamatis authored
Currently vmx_vcpu_load_vmcs() writes the TSC_MULTIPLIER field of the VMCS every time the VMCS is loaded. Instead of doing this, set this field from common code on initialization and whenever the scaling ratio changes. Additionally remove vmx->current_tsc_ratio. This field is redundant as vcpu->arch.tsc_scaling_ratio already tracks the current TSC scaling ratio. The vmx->current_tsc_ratio field is only used for avoiding unnecessary writes but it is no longer needed after removing the code from the VMCS load path. Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
-
Ilias Stamatis authored
The write_l1_tsc_offset() callback has a misleading name. It does not set L1's TSC offset, it rather updates the current TSC offset which might be different if a nested guest is executing. Additionally, both the vmx and svm implementations use the same logic for calculating the current TSC before writing it to hardware. Rename the function and move the common logic to the caller. The vmx/svm specific code now merely sets the given offset to the corresponding hardware structure. Signed-off-by:
-
Ilias Stamatis authored
When L2 is entered we need to "merge" the TSC multiplier and TSC offset values of 01 and 12 together. The merging is done using the following equations: offset_02 = ((offset_01 * mult_12) >> shift_bits) + offset_12 mult_02 = (mult_01 * mult_12) >> shift_bits Where shift_bits is kvm_tsc_scaling_ratio_frac_bits. Signed-off-by:
-
Ilias Stamatis authored
In order to implement as much of the nested TSC scaling logic as possible in common code, we need these vendor callbacks for retrieving the TSC offset and the TSC multiplier that L1 has set for L2. Signed-off-by:
-
Ilias Stamatis authored
This is required for supporting nested TSC scaling. Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
-
Ilias Stamatis authored
Sometimes kvm_scale_tsc() needs to use the current scaling ratio and other times (like when reading the TSC from user space) it needs to use L1's scaling ratio. Have the caller specify this by passing the ratio as a parameter. Signed-off-by:
-
Ilias Stamatis authored
All existing code uses kvm_compute_tsc_offset() passing L1 TSC values to it. Let's document this by renaming it to kvm_compute_l1_tsc_offset(). Signed-off-by:
-
Ilias Stamatis authored
Store L1's scaling ratio in the kvm_vcpu_arch struct like we already do for L1's TSC offset. This allows for easy save/restore when we enter and then exit the nested guest. Signed-off-by:
-
Ilias Stamatis authored
This function is needed for KVM's nested virtualization. The nested TSC scaling implementation requires multiplying the signed TSC offset with the unsigned TSC multiplier. Signed-off-by:
-
Ben Gardon authored
If the TDP MMU is in use, wait to allocate the rmaps until the shadow MMU is actually used. (i.e. a nested VM is launched.) This saves memory equal to 0.2% of guest memory in cases where the TDP MMU is used and there are no nested guests involved. Signed-off-by:
Ben Gardon <bgardon@google.com> Message-Id: <20210518173414.450044-8-bgardon@google.com> Signed-off-by:
-
Ben Gardon authored
If only the TDP MMU is being used to manage the memory mappings for a VM, then many rmap operations can be skipped as they are guaranteed to be no-ops. This saves some time which would be spent on the rmap operation. It also avoids acquiring the MMU lock in write mode for many operations. This makes it safe to run the VM without rmaps allocated, when only using the TDP MMU and sets the stage for waiting to allocate the rmaps until they're needed. Signed-off-by:
-
Ben Gardon authored
Add a field to control whether new memslots should have rmaps allocated for them. As of this change, it's not safe to skip allocating rmaps, so the field is always set to allocate rmaps. Future changes will make it safe to operate without rmaps, using the TDP MMU. Then further changes will allow the rmaps to be allocated lazily when needed for nested oprtation. No functional change expected. Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Ben Gardon authored
Add a new lock to protect the arch-specific fields of memslots if they need to be modified in a kvm->srcu read critical section. A future commit will use this lock to lazily allocate memslot rmaps for x86. Signed-off-by:
-
Ben Gardon authored
Factor out copying kvm_memslots from allocating the memory for new ones in preparation for adding a new lock to protect the arch-specific fields of the memslots. No functional change intended. Reviewed-by:
-
Ben Gardon authored
Small refactor to facilitate allocating rmaps for all memslots at once. No functional change expected. Signed-off-by:
-
Ben Gardon authored
Small code deduplication. No functional change expected. Reviewed-by:
-
Keqian Zhu authored
Currently, when dirty logging is started in initially-all-set mode, we write protect huge pages to prepare for splitting them into 4K pages, and leave normal pages untouched as the logging will be enabled lazily as dirty bits are cleared. However, enabling dirty logging lazily is also feasible for huge pages. This not only reduces the time of start dirty logging, but it also greatly reduces side-effect on guest when there is high dirty rate. Signed-off-by:
Keqian Zhu <zhukeqian1@huawei.com> Message-Id: <20210429034115.35560-3-zhukeqian1@huawei.com> Signed-off-by:
-
Keqian Zhu authored
Prepare for write protecting large page lazily during dirty log tracking, for which we will only need to write protect gfns at large page granularity. No functional or performance change expected. Signed-off-by:
-
Siddharth Chandrasekaran authored
Now that kvm_hv_flush_tlb() has been patched to support XMM hypercall inputs, we can start advertising this feature to guests. Cc: Alexander Graf <graf@amazon.com> Cc: Evgeny Iakovlev <eyakovl@amazon.de> Signed-off-by:
Siddharth Chandrasekaran <sidcha@amazon.de> Message-Id: <e63fc1c61dd2efecbefef239f4f0a598bd552750.1622019134.git.sidcha@amazon.de> Signed-off-by:
-
Siddharth Chandrasekaran authored
Hyper-V supports the use of XMM registers to perform fast hypercalls. This allows guests to take advantage of the improved performance of the fast hypercall interface even though a hypercall may require more than (the current maximum of) two input registers. The XMM fast hypercall interface uses six additional XMM registers (XMM0 to XMM5) to allow the guest to pass an input parameter block of up to 112 bytes. Add framework to read from XMM registers in kvm_hv_hypercall() and use the additional hypercall inputs from XMM registers in kvm_hv_flush_tlb() when possible. Cc: Alexander Graf <graf@amazon.com> Co-developed-by:
Evgeny Iakovlev <eyakovl@amazon.de> Signed-off-by:
-
Siddharth Chandrasekaran authored
As of now there are 7 parameters (and flags) that are used in various hyper-v hypercall handlers. There are 6 more input/output parameters passed from XMM registers which are to be added in an upcoming patch. To make passing arguments to the handlers more readable, capture all these parameters into a single structure. Cc: Alexander Graf <graf@amazon.com> Cc: Evgeny Iakovlev <eyakovl@amazon.de> Signed-off-by:
-
Siddharth Chandrasekaran authored
Hyper-v XMM fast hypercalls use XMM registers to pass input/output parameters. To access these, hyperv.c can reuse some FPU register accessors defined in emulator.c. Move them to a common location so both can access them. While at it, reorder the parameters of these accessor methods to make them more readable. Cc: Alexander Graf <graf@amazon.com> Cc: Evgeny Iakovlev <eyakovl@amazon.de> Signed-off-by:
-
Shaokun Zhang authored
Function 'is_nx_huge_page_enabled' is called only by kvm/mmu, so make it as inline fucntion and remove the unnecessary declaration. Cc: Ben Gardon <bgardon@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Suggested-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Message-Id: <1622102271-63107-1-git-send-email-zhangshaokun@hisilicon.com> Signed-off-by:
-
Fuad Tabba authored
KVM_CHECK_EXTENSION ioctl can return any negative value on error, and not necessarily -1. Change the assertion to reflect that. Signed-off-by:
Fuad Tabba <tabba@google.com> Message-Id: <20210615150443.1183365-1-tabba@google.com> Signed-off-by:
-
- 11 Jun, 2021 3 commits
-
-
Sean Christopherson authored
Calculate and check the full mmu_role when initializing the MMU context for the nested MMU, where "full" means the bits and pieces of the role that aren't handled by kvm_calc_mmu_role_common(). While the nested MMU isn't used for shadow paging, things like the number of levels in the guest's page tables are surprisingly important when walking the guest page tables. Failure to reinitialize the nested MMU context if L2's paging mode changes can result in unexpected and/or missed page faults, and likely other explosions. E.g. if an L1 vCPU is running both a 32-bit PAE L2 and a 64-bit L2, the "common" role calculation will yield the same role for both L2s. If the 64-bit L2 is run after the 32-bit PAE L2, L0 will fail to reinitialize the nested MMU context, ultimately resulting in a bad walk of L2's page tables as the MMU will still have a guest root_level of PT32E_ROOT_LEVEL. WARNING: CPU: 4 PID: 167334 at arch/x86/kvm/vmx/vmx.c:3075 ept_save_pdptrs+0x15/0xe0 [kvm_intel] Modules linked in: kvm_intel] CPU: 4 PID: 167334 Comm: CPU 3/KVM Not tainted 5.13.0-rc1-d849817d5673-reqs #185 Hardware name: ASUS Q87M-E/Q87M-E, BIOS 1102 03/03/2014 RIP: 0010:ept_save_pdptrs+0x15/0xe0 [kvm_intel] Code: <0f> 0b c3 f6 87 d8 02 00f RSP: 0018:ffffbba702dbba00 EFLAGS: 00010202 RAX: 0000000000000011 RBX: 0000000000000002 RCX: ffffffff810a2c08 RDX: ffff91d7bc30acc0 RSI: 0000000000000011 RDI: ffff91d7bc30a600 RBP: ffff91d7bc30a600 R08: 0000000000000010 R09: 0000000000000007 R10: 0000000000000000 R11: 0000000000000000 R12: ffff91d7bc30a600 R13: ffff91d7bc30acc0 R14: ffff91d67c123460 R15: 0000000115d7e005 FS: 00007fe8e9ffb700(0000) GS:ffff91d90fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000029f15a001 CR4: 00000000001726e0 Call Trace: kvm_pdptr_read+0x3a/0x40 [kvm] paging64_walk_addr_generic+0x327/0x6a0 [kvm] paging64_gva_to_gpa_nested+0x3f/0xb0 [kvm] kvm_fetch_guest_virt+0x4c/0xb0 [kvm] __do_insn_fetch_bytes+0x11a/0x1f0 [kvm] x86_decode_insn+0x787/0x1490 [kvm] x86_decode_emulated_instruction+0x58/0x1e0 [kvm] x86_emulate_instruction+0x122/0x4f0 [kvm] vmx_handle_exit+0x120/0x660 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xe25/0x1cb0 [kvm] kvm_vcpu_ioctl+0x211/0x5a0 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x40/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@vger.kernel.org Fixes: bf627a92 ("x86/kvm/mmu: check if MMU reconfiguration is needed in init_kvm_nested_mmu()") Signed-off-by:
-
Wanpeng Li authored
Commit c9b8b07c (KVM: x86: Dynamically allocate per-vCPU emulation context) tries to allocate per-vCPU emulation context dynamically, however, the x86_emulator slab cache is still exiting after the kvm module is unload as below after destroying the VM and unloading the kvm module. grep x86_emulator /proc/slabinfo x86_emulator 36 36 2672 12 8 : tunables 0 0 0 : slabdata 3 3 0 This patch fixes this slab cache leak by destroying the x86_emulator slab cache when the kvm module is unloaded. Fixes: c9b8b07c (KVM: x86: Dynamically allocate per-vCPU emulation context) Cc: stable@vger.kernel.org Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Message-Id: <1623387573-5969-1-git-send-email-wanpengli@tencent.com> Signed-off-by:
-
Alper Gun authored
Send SEV_CMD_DECOMMISSION command to PSP firmware if ASID binding fails. If a failure happens after a successful LAUNCH_START command, a decommission command should be executed. Otherwise, guest context will be unfreed inside the AMD SP. After the firmware will not have memory to allocate more SEV guest context, LAUNCH_START command will begin to fail with SEV_RET_RESOURCE_LIMIT error. The existing code calls decommission inside sev_unbind_asid, but it is not called if a failure happens before guest activation succeeds. If sev_bind_asid fails, decommission is never called. PSP firmware has a limit for the number of guests. If sev_asid_binding fails many times, PSP firmware will not have resources to create another guest context. Cc: stable@vger.kernel.org Fixes: 59414c98 ("KVM: SVM: Add support for KVM_SEV_LAUNCH_START command") Reported-by:
Peter Gonda <pgonda@google.com> Signed-off-by:
Alper Gun <alpergun@google.com> Reviewed-by:
Marc Orr <marcorr@google.com> Signed-off-by:
-
- 10 Jun, 2021 4 commits
-
-
Sean Christopherson authored
Immediately reset the MMU context when the vCPU's SMM flag is cleared so that the SMM flag in the MMU role is always synchronized with the vCPU's flag. If RSM fails (which isn't correctly emulated), KVM will bail without calling post_leave_smm() and leave the MMU in a bad state. The bad MMU role can lead to a NULL pointer dereference when grabbing a shadow page's rmap for a page fault as the initial lookups for the gfn will happen with the vCPU's SMM flag (=0), whereas the rmap lookup will use the shadow page's SMM flag, which comes from the MMU (=1). SMM has an entirely different set of memslots, and so the initial lookup can find a memslot (SMM=0) and then explode on the rmap memslot lookup (SMM=1). general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 8410 Comm: syz-executor382 Not tainted 5.13.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__gfn_to_rmap arch/x86/kvm/mmu/mmu.c:935 [inline] RIP: 0010:gfn_to_rmap+0x2b0/0x4d0 arch/x86/kvm/mmu/mmu.c:947 Code: <42> 80 3c 20 00 74 08 4c 89 ff e8 f1 79 a9 00 4c 89 fb 4d 8b 37 44 RSP: 0018:ffffc90000ffef98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888015b9f414 RCX: ffff888019669c40 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: 0000000000000001 R08: ffffffff811d9cdb R09: ffffed10065a6002 R10: ffffed10065a6002 R11: 0000000000000000 R12: dffffc0000000000 R13: 0000000000000003 R14: 0000000000000001 R15: 0000000000000000 FS: 000000000124b300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000028e31000 CR4: 00000000001526e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rmap_add arch/x86/kvm/mmu/mmu.c:965 [inline] mmu_set_spte+0x862/0xe60 arch/x86/kvm/mmu/mmu.c:2604 __direct_map arch/x86/kvm/mmu/mmu.c:2862 [inline] direct_page_fault+0x1f74/0x2b70 arch/x86/kvm/mmu/mmu.c:3769 kvm_mmu_do_page_fault arch/x86/kvm/mmu.h:124 [inline] kvm_mmu_page_fault+0x199/0x1440 arch/x86/kvm/mmu/mmu.c:5065 vmx_handle_exit+0x26/0x160 arch/x86/kvm/vmx/vmx.c:6122 vcpu_enter_guest+0x3bdd/0x9630 arch/x86/kvm/x86.c:9428 vcpu_run+0x416/0xc20 arch/x86/kvm/x86.c:9494 kvm_arch_vcpu_ioctl_run+0x4e8/0xa40 arch/x86/kvm/x86.c:9722 kvm_vcpu_ioctl+0x70f/0xbb0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3460 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:1069 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:1055 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x440ce9 Cc: stable@vger.kernel.org Reported-by: syzbot+fb0b6a7e8713aeb0319c@syzkaller.appspotmail.com Fixes: 9ec19493 ("KVM: x86: clear SMM flags before loading state while leaving SMM") Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple of warnings by explicitly adding break statements instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Message-Id: <20210528200756.GA39320@embeddedor> Signed-off-by:
-
ChenXiaoSong authored
Fix kernel-doc warnings: arch/x86/kvm/svm/avic.c:233: warning: Function parameter or member 'activate' not described in 'avic_update_access_page' arch/x86/kvm/svm/avic.c:233: warning: Function parameter or member 'kvm' not described in 'avic_update_access_page' arch/x86/kvm/svm/avic.c:781: warning: Function parameter or member 'e' not described in 'get_pi_vcpu_info' arch/x86/kvm/svm/avic.c:781: warning: Function parameter or member 'kvm' not described in 'get_pi_vcpu_info' arch/x86/kvm/svm/avic.c:781: warning: Function parameter or member 'svm' not described in 'get_pi_vcpu_info' arch/x86/kvm/svm/avic.c:781: warning: Function parameter or member 'vcpu_info' not described in 'get_pi_vcpu_info' arch/x86/kvm/svm/avic.c:1009: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Signed-off-by:
ChenXiaoSong <chenxiaosong2@huawei.com> Message-Id: <20210609122217.2967131-1-chenxiaosong2@huawei.com> Signed-off-by:
-
Yanan Wang authored
Errors like below were produced from test_util.c when compiling the KVM selftests on my local platform. lib/test_util.c: In function 'vm_mem_backing_src_alias': lib/test_util.c:177:12: error: initializer element is not constant .flag = anon_flags, ^~~~~~~~~~ lib/test_util.c:177:12: note: (near initialization for 'aliases[0].flag') The reason is that we are using non-const expressions to initialize the static structure, which will probably trigger a compiling error/warning on stricter GCC versions. Fix it by converting the two const variables "anon_flags" and "anon_huge_flags" into more stable macros. Fixes: b3784bc2 ("KVM: selftests: refactor vm_mem_backing_src_type flags") Reported-by:Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
Yanan Wang <wangyanan55@huawei.com> Message-Id: <20210610085418.35544-1-wangyanan55@huawei.com> Signed-off-by:
-
- 09 Jun, 2021 2 commits
-
-
Jim Mattson authored
Per the SDM, "any access that touches bytes 4 through 15 of an APIC register may cause undefined behavior and must not be executed." Worse, such an access in kvm_lapic_reg_read can result in a leak of kernel stack contents. Prior to commit 01402cf8 ("kvm: LAPIC: write down valid APIC registers"), such an access was explicitly disallowed. Restore the guard that was removed in that commit. Fixes: 01402cf8 ("kvm: LAPIC: write down valid APIC registers") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Message-Id: <20210602205224.3189316-1-jmattson@google.com> Signed-off-by:
-
Paolo Bonzini authored
array_index_nospec does not work for uint64_t on 32-bit builds. However, the size of a memory slot must be less than 20 bits wide on those system, since the memory slot must fit in the user address space. So just store it in an unsigned long. Signed-off-by:
-
- 08 Jun, 2021 6 commits
-
-
Paolo Bonzini authored
KVM's mechanism for accessing guest memory translates a guest physical address (gpa) to a host virtual address using the right-shifted gpa (also known as gfn) and a struct kvm_memory_slot. The translation is performed in __gfn_to_hva_memslot using the following formula: hva = slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE It is expected that gfn falls within the boundaries of the guest's physical memory. However, a guest can access invalid physical addresses in such a way that the gfn is invalid. __gfn_to_hva_memslot is called from kvm_vcpu_gfn_to_hva_prot, which first retrieves a memslot through __gfn_to_memslot. While __gfn_to_memslot does check that the gfn falls within the boundaries of the guest's physical memory or not, a CPU can speculate the result of the check and continue execution speculatively using an illegal gfn. The speculation can result in calculating an out-of-bounds hva. If the resulting host virtual address is used to load another guest physical address, this is effectively a Spectre gadget consisting of two consecutive reads, the second of which is data dependent on the first. Right now it's not clear if there are any cases in which this is exploitable. One interesting case was reported by the original author of this patch, and involves visiting guest page tables on x86. Right now these are not vulnerable because the hva read goes through get_user(), which contains an LFENCE speculation barrier. However, there are patches in progress for x86 uaccess.h to mask kernel addresses instead of using LFENCE; once these land, a guest could use speculation to read from the VMM's ring 3 address space. Other architectures such as ARM already use the address masking method, and would be susceptible to this same kind of data-dependent access gadgets. Therefore, this patch proactively protects from these attacks by masking out-of-bounds gfns in __gfn_to_hva_memslot, which blocks speculation of invalid hvas. Sean Christopherson noted that this patch does not cover kvm_read_guest_offset_cached. This however is limited to a few bytes past the end of the cache, and therefore it is unlikely to be useful in the context of building a chain of data dependent accesses. Reported-by:Artemiy Margaritov <artemiy.margaritov@gmail.com> Co-developed-by:
-
Lai Jiangshan authored
When using shadow paging, unload the guest MMU when emulating a guest TLB flush to ensure all roots are synchronized. From the guest's perspective, flushing the TLB ensures any and all modifications to its PTEs will be recognized by the CPU. Note, unloading the MMU is overkill, but is done to mirror KVM's existing handling of INVPCID(all) and ensure the bug is squashed. Future cleanup can be done to more precisely synchronize roots when servicing a guest TLB flush. If TDP is enabled, synchronizing the MMU is unnecessary even if nested TDP is in play, as a "legacy" TLB flush from L1 does not invalidate L1's TDP mappings. For EPT, an explicit INVEPT is required to invalidate guest-physical mappings; for NPT, guest mappings are always tagged with an ASID and thus can only be invalidated via the VMCB's ASID control. This bug has existed since the introduction of KVM_VCPU_FLUSH_TLB. It was only recently exposed after Linux guests stopped flushing the local CPU's TLB prior to flushing remote TLBs (see commit 4ce94eab, "x86/mm/tlb: Flush remote and local TLBs concurrently"), but is also visible in Windows 10 guests. Tested-by:
Lai Jiangshan <laijs@linux.alibaba.com> [sean: massaged comment and changelog] Message-Id: <20210531172256.2908-1-jiangshanlai@gmail.com> Signed-off-by:
-
Sean Christopherson authored
Use the __string() machinery provided by the tracing subystem to make a copy of the string literals consumed by the "nested VM-Enter failed" tracepoint. A complete copy is necessary to ensure that the tracepoint can't outlive the data/memory it consumes and deference stale memory. Because the tracepoint itself is defined by kvm, if kvm-intel and/or kvm-amd are built as modules, the memory holding the string literals defined by the vendor modules will be freed when the module is unloaded, whereas the tracepoint and its data in the ring buffer will live until kvm is unloaded (or "indefinitely" if kvm is built-in). This bug has existed since the tracepoint was added, but was recently exposed by a new check in tracing to detect exactly this type of bug. fmt: '%s%s ' current_buffer: ' vmx_dirty_log_t-140127 [003] .... kvm_nested_vmenter_failed: ' WARNING: CPU: 3 PID: 140134 at kernel/trace/trace.c:3759 trace_check_vprintf+0x3be/0x3e0 CPU: 3 PID: 140134 Comm: less Not tainted 5.13.0-rc1-ce2e73ce600a-req #184 Hardware name: ASUS Q87M-E/Q87M-E, BIOS 1102 03/03/2014 RIP: 0010:trace_check_vprintf+0x3be/0x3e0 Code: <0f> 0b 44 8b 4c 24 1c e9 a9 fe ff ff c6 44 02 ff 00 49 8b 97 b0 20 RSP: 0018:ffffa895cc37bcb0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffa895cc37bd08 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff9766cfad74f8 RBP: ffffffffc0a041d4 R08: ffff9766cfad74f0 R09: ffffa895cc37bad8 R10: 0000000000000001 R11: 0000000000000001 R12: ffffffffc0a041d4 R13: ffffffffc0f4dba8 R14: 0000000000000000 R15: ffff976409f2c000 FS: 00007f92fa200740(0000) GS:ffff9766cfac0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559bd11b0000 CR3: 000000019fbaa002 CR4: 00000000001726e0 Call Trace: trace_event_printf+0x5e/0x80 trace_raw_output_kvm_nested_vmenter_failed+0x3a/0x60 [kvm] print_trace_line+0x1dd/0x4e0 s_show+0x45/0x150 seq_read_iter+0x2d5/0x4c0 seq_read+0x106/0x150 vfs_read+0x98/0x180 ksys_read+0x5f/0xe0 do_syscall_64+0x40/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Cc: Steven Rostedt <rostedt@goodmis.org> Fixes: 380e0055 ("KVM: nVMX: trace nested VM-Enter failures detected by H/W") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Message-Id: <20210607175748.674002-1-seanjc@google.com>
-
Zhenzhong Duan authored
Until commit 39fe2fc9 ("selftests: kvm: make allocation of extra memory take effect", 2021-05-27), parameter extra_mem_pages was used only to calculate the page table size for all the memory chunks, because real memory allocation happened with calls of vm_userspace_mem_region_add() after vm_create_default(). Commit 39fe2fc9 however changed the meaning of extra_mem_pages to the size of memory slot 0. This makes the memory allocation more flexible, but makes it harder to account for the number of pages needed for the page tables. For example, memslot_perf_test has a small amount of memory in slot 0 but a lot in other slots, and adding that memory twice (both in slot 0 and with later calls to vm_userspace_mem_region_add()) causes an error that was fixed in commit 000ac429 ("selftests: kvm: fix overlapping addresses in memslot_perf_test", 2021-05-29) Since both uses are sensible, add a new parameter slot0_mem_pages to vm_create_with_vcpus() and some comments to clarify the meaning of slot0_mem_pages and extra_mem_pages. With this change, memslot_perf_test can go back to passing the number of memory pages as extra_mem_pages. Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@intel.com> Message-Id: <20210608233816.423958-4-zhenzhong.duan@intel.com> [Squashed in a single patch and rewrote the commit message. - Paolo] Signed-off-by:
-
Christian Borntraeger authored
s390x can have up to 47bits of physical guest and 64bits of virtual address bits. Add a new address mode to avoid errors of testcases going beyond 47bits. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20210608123954.10991-1-borntraeger@de.ibm.com> Fixes: ef4c9f4f ("KVM: selftests: Fix 32-bit truncation of vm_get_max_gfn()") Cc: stable@vger.kernel.org Reviewed-by:
David Matlack <dmatlack@google.com> Signed-off-by:
-
Lai Jiangshan authored
In record_steal_time(), st->preempted is read twice, and trace_kvm_pv_tlb_flush() might output result inconsistent if kvm_vcpu_flush_tlb_guest() see a different st->preempted later. It is a very trivial problem and hardly has actual harm and can be avoided by reseting and reading st->preempted in atomic way via xchg(). Signed-off-by:
-
