- 01 Mar, 2019 6 commits
-
-
Joerg Roedel authored
Merge branches 'iommu/fixes', 'arm/msm', 'arm/tegra', 'arm/mediatek', 'x86/vt-d', 'x86/amd', 'hyper-v' and 'core' into next
-
Lu Baolu authored
After tearing down a pasid entry, the domain id is used to invalidate the translation caches. Retrieve the domain id from the pasid entry value before clearing the pasid entry. Otherwise, we will always use domain id 0. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by:
Liu Yi L <yi.l.liu@intel.com> Fixes: 6f7db75e ("iommu/vt-d: Add second level page table interface") Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Lu Baolu authored
Intel IOMMU could be turned off with intel_iommu=off. If Intel IOMMU is off, the intel_iommu struct will not be initialized. When device drivers call intel_svm_bind_mm(), the NULL pointer reference will happen there. Add dmar_disabled check to avoid NULL pointer reference. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Reported-by:
Dave Jiang <dave.jiang@intel.com> Fixes: 2f26e0a9 ("iommu/vt-d: Add basic SVM PASID support") Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Lu Baolu authored
Otherwise, the translation type field of a context entry for a PCI device will always be 0. All translated DMA requests will be blocked by IOMMU. As the result, the PCI devices with PCI ATS (device IOTBL) support won't work as expected. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Suggested-by:
Kevin Tian <kevin.tian@intel.com> Fixes: 7373a8cc ("iommu/vt-d: Setup context and enable RID2PASID support") Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Lu Baolu authored
Commit fb58fdcd ("iommu/vt-d: Do not enable ATS for untrusted devices") disables ATS support on the devices which have been marked as untrusted. Unfortunately this is not enough to fix the DMA attack vulnerabiltiies because IOMMU driver allows translated requests as long as a device advertises the ATS capability. Hence a malicious peripheral device could use this to bypass IOMMU. This disables the ATS support on untrusted devices by clearing the internal per-device ATS mark. As the result, IOMMU driver will block any translated requests from any device marked as untrusted. Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Suggested-by:
Kevin Tian <kevin.tian@intel.com> Suggested-by:
Ashok Raj <ashok.raj@intel.com> Fixes: fb58fdcd ("iommu/vt-d: Do not enable ATS for untrusted devices") Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Yang Wei authored
Delete a superfluous semicolon in mtk_iommu_add_device(). Signed-off-by:
Yang Wei <yang.wei9@zte.com.cn> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
- 28 Feb, 2019 4 commits
-
-
Lan Tianyu authored
This patch is to add Hyper-V IOMMU driver file into Hyper-V CORE and DRIVERS scope. Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
Lan Tianyu <Tianyu.Lan@microsoft.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Lan Tianyu authored
On the bare metal, enabling X2APIC mode requires interrupt remapping function which helps to deliver irq to cpu with 32-bit APIC ID. Hyper-V doesn't provide interrupt remapping function so far and Hyper-V MSI protocol already supports to deliver interrupt to the CPU whose virtual processor index is more than 255. IO-APIC interrupt still has 8-bit APIC ID limitation. This patch is to add Hyper-V stub IOMMU driver in order to enable X2APIC mode successfully in Hyper-V Linux guest. The driver returns X2APIC interrupt remapping capability when X2APIC mode is available. Otherwise, it creates a Hyper-V irq domain to limit IO-APIC interrupts' affinity and make sure cpus assigned with IO-APIC interrupt have 8-bit APIC ID. Define 24 IO-APIC remapping entries because Hyper-V only expose one single IO-APIC and one IO-APIC has 24 pins according IO-APIC spec( https://pdos.csail.mit.edu/6.828/2016/readings/ia32/ioapic.pdf). Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
Lan Tianyu <Tianyu.Lan@microsoft.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Lan Tianyu authored
Hyper-V doesn't provide irq remapping for IO-APIC. To enable x2apic, set x2apic destination mode to physcial mode when x2apic is available and Hyper-V IOMMU driver makes sure cpus assigned with IO-APIC irqs have 8-bit APIC id. Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Signed-off-by:
Lan Tianyu <Tianyu.Lan@microsoft.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Kuppuswamy Sathyanarayanan authored
Fix unused function warning when compiled with CONFIG_PCI_PASID disabled. Fixes: e5567f5f ("PCI/ATS: Add pci_prg_resp_pasid_required() interface.") Signed-off-by:
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
- 26 Feb, 2019 13 commits
-
-
Lu Baolu authored
The Intel IOMMU driver will put devices into a static identity mapped domain during boot if the kernel parameter "iommu=pt" is used. That means the IOMMU hardware will translate a DMA address into the same memory address. Unfortunately, hot-added devices are not subject to this. That results in some devices not working properly after hot added. A quick way to reproduce this issue is to boot a system with iommu=pt and, remove then readd the pci device with echo 1 > /sys/bus/pci/devices/[pci_source_id]/remove echo 1 > /sys/bus/pci/rescan You will find the identity mapped domain was replaced with a normal domain. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: stable@vger.kernel.org Reported-by:
Jis Ben <jisben@google.com> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Tested-by:
James Dong <xmdong@google.com> Fixes: 99dcaded ('intel-iommu: Support PCIe hot-plug') Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Julia Cartwright authored
Commit 57384592 ("iommu/vt-d: Store bus information in RMRR PCI device path") changed the type of the path data, however, the change in path type was not reflected in size calculations. Update to use the correct type and prevent a buffer overflow. This bug manifests in systems with deep PCI hierarchies, and can lead to an overflow of the static allocated buffer (dmar_pci_notify_info_buf), or can lead to overflow of slab-allocated data. BUG: KASAN: global-out-of-bounds in dmar_alloc_pci_notify_info+0x1d5/0x2e0 Write of size 1 at addr ffffffff90445d80 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.14.87-rt49-02406-gd0a0e96 #1 Call Trace: ? dump_stack+0x46/0x59 ? print_address_description+0x1df/0x290 ? dmar_alloc_pci_notify_info+0x1d5/0x2e0 ? kasan_report+0x256/0x340 ? dmar_alloc_pci_notify_info+0x1d5/0x2e0 ? e820__memblock_setup+0xb0/0xb0 ? dmar_dev_scope_init+0x424/0x48f ? __down_write_common+0x1ec/0x230 ? dmar_dev_scope_init+0x48f/0x48f ? dmar_free_unused_resources+0x109/0x109 ? cpumask_next+0x16/0x20 ? __kmem_cache_create+0x392/0x430 ? kmem_cache_create+0x135/0x2f0 ? e820__memblock_setup+0xb0/0xb0 ? intel_iommu_init+0x170/0x1848 ? _raw_spin_unlock_irqrestore+0x32/0x60 ? migrate_enable+0x27a/0x5b0 ? sched_setattr+0x20/0x20 ? migrate_disable+0x1fc/0x380 ? task_rq_lock+0x170/0x170 ? try_to_run_init_process+0x40/0x40 ? locks_remove_file+0x85/0x2f0 ? dev_prepare_static_identity_mapping+0x78/0x78 ? rt_spin_unlock+0x39/0x50 ? lockref_put_or_lock+0x2a/0x40 ? dput+0x128/0x2f0 ? __rcu_read_unlock+0x66/0x80 ? __fput+0x250/0x300 ? __rcu_read_lock+0x1b/0x30 ? mntput_no_expire+0x38/0x290 ? e820__memblock_setup+0xb0/0xb0 ? pci_iommu_init+0x25/0x63 ? pci_iommu_init+0x25/0x63 ? do_one_initcall+0x7e/0x1c0 ? initcall_blacklisted+0x120/0x120 ? kernel_init_freeable+0x27b/0x307 ? rest_init+0xd0/0xd0 ? kernel_init+0xf/0x120 ? rest_init+0xd0/0xd0 ? ret_from_fork+0x1f/0x40 The buggy address belongs to the variable: dmar_pci_notify_info_buf+0x40/0x60 Fixes: 57384592 ("iommu/vt-d: Store bus information in RMRR PCI device path") Signed-off-by:
Julia Cartwright <julia@ni.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Geert Uytterhoeven authored
A change made in the final version of IOMMU debugfs support replaced the public function iommu_debugfs_new_driver_dir() by the public dentry iommu_debugfs_dir in <linux/iommu.h>, but forgot to update both the implementation in iommu-debugfs.c, and the patch description. Fix this by exporting iommu_debugfs_dir, and removing the reference to and implementation of iommu_debugfs_new_driver_dir(). Fixes: bad614b2 ("iommu: Enable debugfs exposure of IOMMU driver internals") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Geert Uytterhoeven authored
Add missing kerneldoc for iommu_ops.is_attach_deferred(). Fixes: e01d1913 ("iommu: Add is_attach_deferred call-back to iommu-ops") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Geert Uytterhoeven authored
Add missing kerneldoc for iommu_ops.iotlb_sync_map(). Fixes: 1d7ae53b ("iommu: Introduce iotlb_sync_map callback") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Kuppuswamy Sathyanarayanan authored
As per Intel vt-d specification, Rev 3.0 (section 7.5.1.1, title "Page Request Descriptor"), Intel IOMMU page request descriptor only uses bits[63:12] of the page address. Hence Intel IOMMU driver would only permit devices that advertise they would only send Page Aligned Requests to participate in ATS service. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Keith Busch <keith.busch@intel.com> Suggested-by:
Ashok Raj <ashok.raj@intel.com> Signed-off-by:
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Kuppuswamy Sathyanarayanan authored
Return the Page Aligned Request bit in the ATS Capability Register. As per PCIe spec r4.0, sec 10.5.1.2, if the Page Aligned Request bit is set, it indicates the Untranslated Addresses generated by the device are always aligned to a 4096 byte boundary. An IOMMU that can only translate page-aligned addresses can only be used with devices that always produce aligned Untranslated Addresses. This interface will be used by drivers for such IOMMUs to determine whether devices can use the ATS service. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Keith Busch <keith.busch@intel.com> Suggested-by:
Ashok Raj <ashok.raj@intel.com> Signed-off-by:
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Kuppuswamy Sathyanarayanan authored
In Intel IOMMU, if the Page Request Queue (PRQ) is full, it will automatically respond to the device with a success message as a keep alive. And when sending the success message, IOMMU will include PASID in the Response Message when the Page Request has a PASID in Request Message and it does not check against the PRG Response PASID requirement of the device before sending the response. Also, if the device receives the PRG response with PASID when its not expecting it the device behavior is undefined. So if PASID is enabled in the device, enable PRI only if device expects PASID in PRG Response Message. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Keith Busch <keith.busch@intel.com> Suggested-by:
Ashok Raj <ashok.raj@intel.com> Signed-off-by:
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Kuppuswamy Sathyanarayanan authored
Return the PRG Response PASID Required bit in the Page Request Status Register. As per PCIe spec r4.0, sec 10.5.2.3, if this bit is Set, the device expects a PASID TLP Prefix on PRG Response Messages when the corresponding Page Requests had a PASID TLP Prefix. If Clear, the device does not expect PASID TLP Prefixes on any PRG Response Message, and the device behavior is undefined if the device receives a PRG Response Message with a PASID TLP Prefix. Also the device behavior is undefined if this bit is Set and the device receives a PRG Response Message with no PASID TLP Prefix when the corresponding Page Requests had a PASID TLP Prefix. This function will be used by drivers like IOMMU, if it is required to check the status of the PRG Response PASID Required bit before enabling the PASID support of the device. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Keith Busch <keith.busch@intel.com> Suggested-by:
Ashok Raj <ashok.raj@intel.com> Signed-off-by:
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Logan Gunthorpe authored
When a device has multiple aliases that all are from the same bus, we program the IRTE to accept requests from any matching device on the bus. This is so NTB devices which can have requests from multiple bus-devfns can pass MSI interrupts through across the bridge. Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Logan Gunthorpe authored
The current code uses set_irte_sid() with SVT_VERIFY_BUS and PCI_DEVID to set the SID value. However, this is very confusing because, with SVT_VERIFY_BUS, the SID value is not a PCI devfn address, but the start and end bus numbers to match against. According to the Intel Virtualization Technology for Directed I/O Architecture Specification, Rev. 3.0, page 9-36: The most significant 8-bits of the SID field contains the Startbus#, and the least significant 8-bits of the SID field contains the Endbus#. Interrupt requests that reference this IRTE must have a requester-id whose bus# (most significant 8-bits of requester-id) has a value equal to or within the Startbus# to Endbus# range. So to make this more clear, introduce a new set_irte_verify_bus() that explicitly takes a start bus and end bus so that we can stop abusing the PCI_DEVID macro. This helper function will be called a second time in an subsequent patch. Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Tom Murphy authored
Fix typo, flush_tlb_all should be flush_iotlb_all. Signed-off-by:
Tom Murphy <murphyt7@tcd.ie> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
Nicolas Boichat authored
L1 tables are allocated with __get_dma_pages, and therefore already ignored by kmemleak. Without this, the kernel would print this error message on boot, when the first L1 table is allocated: [ 2.810533] kmemleak: Trying to color unknown object at 0xffffffd652388000 as Black [ 2.818190] CPU: 5 PID: 39 Comm: kworker/5:0 Tainted: G S 4.19.16 #8 [ 2.831227] Workqueue: events deferred_probe_work_func [ 2.836353] Call trace: ... [ 2.852532] paint_ptr+0xa0/0xa8 [ 2.855750] kmemleak_ignore+0x38/0x6c [ 2.859490] __arm_v7s_alloc_table+0x168/0x1f4 [ 2.863922] arm_v7s_alloc_pgtable+0x114/0x17c [ 2.868354] alloc_io_pgtable_ops+0x3c/0x78 ... Fixes: e5fc9753 ("iommu/io-pgtable: Add ARMv7 short descriptor support") Signed-off-by:
Nicolas Boichat <drinkcat@chromium.org> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de>
-
- 25 Feb, 2019 1 commit
-
-
Linus Torvalds authored
-
- 24 Feb, 2019 8 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "Bug fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MMU: record maximum physical address width in kvm_mmu_extended_role kvm: x86: Return LA57 feature based on hardware capability x86/kvm/mmu: fix switch between root and guest MMUs s390: vsie: Use effective CRYCBD.31 to check CRYCBD validity
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Hopefully the last pull request for this release. Fingers crossed: 1) Only refcount ESP stats on full sockets, from Martin Willi. 2) Missing barriers in AF_UNIX, from Al Viro. 3) RCU protection fixes in ipv6 route code, from Paolo Abeni. 4) Avoid false positives in untrusted GSO validation, from Willem de Bruijn. 5) Forwarded mesh packets in mac80211 need more tailroom allocated, from Felix Fietkau. 6) Use operstate consistently for linkup in team driver, from George Wilkie. 7) ThunderX bug fixes from Vadim Lomovtsev. Mostly races between VF and PF code paths. 8) Purge ipv6 exceptions during netdevice removal, from Paolo Abeni. 9) nfp eBPF code gen fixes from Jiong Wang. 10) bnxt_en firmware timeout fix from Michael Chan. 11) Use after free in udp/udpv6 error handlers, from Paolo Abeni. 12) Fix a race in x25_bind triggerable by syzbot, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits) net: phy: realtek: Dummy IRQ calls for RTL8366RB tcp: repaired skbs must init their tso_segs net/x25: fix a race in x25_bind() net: dsa: Remove documentation for port_fdb_prepare Revert "bridge: do not add port to router list when receives query with source 0.0.0.0" selftests: fib_tests: sleep after changing carrier. again. net: set static variable an initial value in atl2_probe() net: phy: marvell10g: Fix Multi-G advertisement to only advertise 10G bpf, doc: add bpf list as secondary entry to maintainers file udp: fix possible user after free in error handler udpv6: fix possible user after free in error handler fou6: fix proto error handler argument type udpv6: add the required annotation to mib type mdio_bus: Fix use-after-free on device_register fails net: Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255 bnxt_en: Wait longer for the firmware message response to complete. bnxt_en: Fix typo in firmware message timeout logic. nfp: bpf: fix ALU32 high bits clearance bug nfp: bpf: fix code-gen bug on BPF_ALU | BPF_XOR | BPF_K Documentation: networking: switchdev: Update port parent ID section ...
-
Linus Walleij authored
This fixes a regression introduced by commit 0d2e778e "net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt". This assumes that a PHY cannot trigger interrupt unless it has .config_intr() or .ack_interrupt() implemented. A later patch makes the code assume both need to be implemented for interrupts to be present. But this PHY (which is inside a DSA) will happily fire interrupts without either callback. Implement dummy callbacks for .config_intr() and .ack_interrupt() in the phy header to fix this. Tested on the RTL8366RB on D-Link DIR-685. Fixes: 0d2e778e ("net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt") Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
syzbot reported a WARN_ON(!tcp_skb_pcount(skb)) in tcp_send_loss_probe() [1] This was caused by TCP_REPAIR sent skbs that inadvertenly were missing a call to tcp_init_tso_segs() [1] WARNING: CPU: 1 PID: 0 at net/ipv4/tcp_output.c:2534 tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.0.0-rc7+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 panic+0x2cb/0x65c kernel/panic.c:214 __warn.cold+0x20/0x45 kernel/panic.c:571 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] fixup_bug arch/x86/kernel/traps.c:173 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534 Code: 88 fc ff ff 4c 89 ef e8 ed 75 c8 fb e9 c8 fc ff ff e8 43 76 c8 fb e9 63 fd ff ff e8 d9 75 c8 fb e9 94 f9 ff ff e8 bf 03 91 fb <0f> 0b e9 7d fa ff ff e8 b3 03 91 fb 0f b6 1d 37 43 7a 03 31 ff 89 RSP: 0018:ffff8880ae907c60 EFLAGS: 00010206 RAX: ffff8880a989c340 RBX: 0000000000000000 RCX: ffffffff85dedbdb RDX: 0000000000000100 RSI: ffffffff85dee0b1 RDI: 0000000000000005 RBP: ffff8880ae907c90 R08: ffff8880a989c340 R09: ffffed10147d1ae1 R10: ffffed10147d1ae0 R11: ffff8880a3e8d703 R12: ffff888091b90040 R13: ffff8880a3e8d540 R14: 0000000000008000 R15: ffff888091b90860 tcp_write_timer_handler+0x5c0/0x8a0 net/ipv4/tcp_timer.c:583 tcp_write_timer+0x10e/0x1d0 net/ipv4/tcp_timer.c:607 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 </IRQ> RIP: 0010:native_safe_halt+0x2/0x10 arch/x86/include/asm/irqflags.h:58 Code: ff ff ff 48 89 c7 48 89 45 d8 e8 59 0c a1 fa 48 8b 45 d8 e9 ce fe ff ff 48 89 df e8 48 0c a1 fa eb 82 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90 RSP: 0018:ffff8880a98afd78 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: 1ffffffff1125061 RBX: ffff8880a989c340 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000001 RDI: ffff8880a989cbbc RBP: ffff8880a98afda8 R08: ffff8880a989c340 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 R13: ffffffff889282f8 R14: 0000000000000001 R15: 0000000000000000 arch_cpu_idle+0x10/0x20 arch/x86/kernel/process.c:555 default_idle_call+0x36/0x90 kernel/sched/idle.c:93 cpuidle_idle_call kernel/sched/idle.c:153 [inline] do_idle+0x386/0x570 kernel/sched/idle.c:262 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:353 start_secondary+0x404/0x5c0 arch/x86/kernel/smpboot.c:271 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 79861919 ("tcp: fix TCP_REPAIR xmit queue setup") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
syzbot was able to trigger another soft lockup [1] I first thought it was the O(N^2) issue I mentioned in my prior fix (f657d22ee1f "net/x25: do not hold the cpu too long in x25_new_lci()"), but I eventually found that x25_bind() was not checking SOCK_ZAPPED state under socket lock protection. This means that multiple threads can end up calling x25_insert_socket() for the same socket, and corrupt x25_list [1] watchdog: BUG: soft lockup - CPU#0 stuck for 123s! [syz-executor.2:10492] Modules linked in: irq event stamp: 27515 hardirqs last enabled at (27514): [<ffffffff81006673>] trace_hardirqs_on_thunk+0x1a/0x1c hardirqs last disabled at (27515): [<ffffffff8100668f>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (32): [<ffffffff8632ee73>] x25_get_neigh+0xa3/0xd0 net/x25/x25_link.c:336 softirqs last disabled at (34): [<ffffffff86324bc3>] x25_find_socket+0x23/0x140 net/x25/af_x25.c:341 CPU: 0 PID: 10492 Comm: syz-executor.2 Not tainted 5.0.0-rc7+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__sanitizer_cov_trace_pc+0x4/0x50 kernel/kcov.c:97 Code: f4 ff ff ff e8 11 9f ea ff 48 c7 05 12 fb e5 08 00 00 00 00 e9 c8 e9 ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 <48> 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 38 0c 92 7e 81 e2 RSP: 0018:ffff88806e94fc48 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: 1ffff1100d84dac5 RBX: 0000000000000001 RCX: ffffc90006197000 RDX: 0000000000040000 RSI: ffffffff86324bf3 RDI: ffff88806c26d628 RBP: ffff88806e94fc48 R08: ffff88806c1c6500 R09: fffffbfff1282561 R10: fffffbfff1282560 R11: ffffffff89412b03 R12: ffff88806c26d628 R13: ffff888090455200 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007f3a107e4700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3a107e3db8 CR3: 00000000a5544000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __x25_find_socket net/x25/af_x25.c:327 [inline] x25_find_socket+0x7d/0x140 net/x25/af_x25.c:342 x25_new_lci net/x25/af_x25.c:355 [inline] x25_connect+0x380/0xde0 net/x25/af_x25.c:784 __sys_connect+0x266/0x330 net/socket.c:1662 __do_sys_connect net/socket.c:1673 [inline] __se_sys_connect net/socket.c:1670 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1670 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f3a107e3c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e29 RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000005 RBP: 000000000073c040 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f3a107e46d4 R13: 00000000004be362 R14: 00000000004ceb98 R15: 00000000ffffffff Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 10493 Comm: syz-executor.3 Not tainted 5.0.0-rc7+ #88 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline] RIP: 0010:queued_write_lock_slowpath+0x143/0x290 kernel/locking/qrwlock.c:86 Code: 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 41 0f b6 55 00 <41> 38 d7 7c eb 84 d2 74 e7 48 89 df e8 cc aa 4e 00 eb dd be 04 00 RSP: 0018:ffff888085c47bd8 EFLAGS: 00000206 RAX: 0000000000000300 RBX: ffffffff89412b00 RCX: 1ffffffff1282560 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89412b00 RBP: ffff888085c47c70 R08: 1ffffffff1282560 R09: fffffbfff1282561 R10: fffffbfff1282560 R11: ffffffff89412b03 R12: 00000000000000ff R13: fffffbfff1282560 R14: 1ffff11010b88f7d R15: 0000000000000003 FS: 00007fdd04086700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdd04064db8 CR3: 0000000090be0000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: queued_write_lock include/asm-generic/qrwlock.h:104 [inline] do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203 __raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline] _raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312 x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267 x25_bind+0x273/0x340 net/x25/af_x25.c:703 __sys_bind+0x23f/0x290 net/socket.c:1481 __do_sys_bind net/socket.c:1492 [inline] __se_sys_bind net/socket.c:1490 [inline] __x64_sys_bind+0x73/0xb0 net/socket.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e29 Fixes: 90c27297 ("X.25 remove bkl in bind") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: andrew hendry <andrew.hendry@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hauke Mehrtens authored
This callback was removed some time ago, also remove the documentation. Fixes: 1b6dd556 ("net: dsa: Remove prepare phase for FDB") Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
This reverts commit 5a2de63f ("bridge: do not add port to router list when receives query with source 0.0.0.0") and commit 0fe5119e ("net: bridge: remove ipv6 zero address check in mcast queries") The reason is RFC 4541 is not a standard but suggestive. Currently we will elect 0.0.0.0 as Querier if there is no ip address configured on bridge. If we do not add the port which recives query with source 0.0.0.0 to router list, the IGMP reports will not be about to forward to Querier, IGMP data will also not be able to forward to dest. As Nikolay suggested, revert this change first and add a boolopt api to disable none-zero election in future if needed. Reported-by:
Linus Lüssing <linus.luessing@c0d3.blue> Reported-by:
Sebastian Gottschall <s.gottschall@newmedia-net.de> Fixes: 5a2de63f ("bridge: do not add port to router list when receives query with source 0.0.0.0") Fixes: 0fe5119e ("net: bridge: remove ipv6 zero address check in mcast queries") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thadeu Lima de Souza Cascardo authored
Just like commit e2ba732a ("selftests: fib_tests: sleep after changing carrier"), wait one second to allow linkwatch to propagate the carrier change to the stack. There are two sets of carrier tests. The first slept after the carrier was set to off, and when the second set ran, it was likely that the linkwatch would be able to run again without much delay, reducing the likelihood of a race. However, if you run 'fib_tests.sh -t carrier' on a loop, you will quickly notice the failures. Sleeping on the second set of tests make the failures go away. Cc: David Ahern <dsahern@gmail.com> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 23 Feb, 2019 8 commits
-
-
Mao Wenan authored
cards_found is a static variable, but when it enters atl2_probe(), cards_found is set to zero, the value is not consistent with last probe, so next behavior is not our expect. Signed-off-by:
Mao Wenan <maowenan@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxime Chevallier authored
Some Marvell Alaska PHYs support 2.5G, 5G and 10G BaseT links. Their default behaviour is to advertise all of these modes, but at the moment, only 10GBaseT is supported. To prevent link partners from establishing link at that speed, clear these modes upon configuring aneg parameters. Fixes: 20b2af32 ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Reported-by:
Russell King <linux@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fix from Michael Ellerman: "One fix for an oops when using SRIOV, introduced by the recent changes to support compound IOMMU groups. Thanks to Alexey Kardashevskiy" * tag 'powerpc-5.0-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv/sriov: Register IOMMU groups for VFs
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Four small fixes: three in drivers and one in the core. The core fix is also minor in scope since the bug it fixes is only known to affect systems using SCSI reservations. Of the driver bugs, the libsas one is the most major because it can lead to multiple disks on the same expander not being exposed" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: reset host byte in DID_NEXUS_FAILURE case scsi: libsas: Fix rphy phy_identifier for PHYs with end devices attached scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocation scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2019-02-23 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a bug in BPF's LPM deletion logic to match correct prefix length, from Alban. 2) Fix AF_XDP teardown by not destroying umem prematurely as it is still needed till all outstanding skbs are freed, from Björn. 3) Fix unkillable BPF_PROG_TEST_RUN under preempt kernel by checking signal_pending() outside need_resched() condition which is never triggered there, from Stanislav. 4) Fix two nfp JIT bugs, one in code emission for K-based xor, and another one to explicitly clear upper bits in alu32, from Jiong. 5) Add bpf list address to maintainers file, from Daniel. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
Merge branch 'fixes-v5.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull keys fixes from James Morris: "Two fixes from Eric Biggers" * 'fixes-v5.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: always initialize keyring_index_key::desc_len KEYS: user: Align the payload buffer
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix a regression in the PM-runtime framework introduced by the recent switch-over of it to using hrtimers and a use-after-free introduced by one of the recent changes in the scmi-cpufreq driver. Specifics: - Use hrtimer_try_to_cancel() instead of hrtimer_cancel() in the PM-runtime framework to avoid a possible timer-related deadlock introduced recently (Vincent Guittot). - Reorder the scmi-cpufreq driver code to avoid accessing memory that has just been freed (Yangtao Li)" * tag 'pm-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM-runtime: Fix deadlock when canceling hrtimer cpufreq: scmi: Fix use-after-free in scmi_cpufreq_exit()
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "Only a handful of device tree fixes, all simple enough: NVIDIA Tegra: - Fix a regression for booting on chromebooks TI OMAP: - Two fixes PHY mode on am335x reference boards Marvell mvebu: - A regression fix for Armada XP NAND flash controllers - An incorrect reset signal on the clearfog board" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: tegra: Restore DT ABI on Tegra124 Chromebooks ARM: dts: am335x-evm: Fix PHY mode for ethernet ARM: dts: am335x-evmsk: Fix PHY mode for ethernet arm64: dts: clearfog-gt-8k: fix SGMII PHY reset signal ARM: dts: armada-xp: fix Armada XP boards NAND description
-