1. 26 Oct, 2010 40 commits
    • Michel Lespinasse's avatar
      mm: retry page fault when blocking on disk transfer · d065bd81
      Michel Lespinasse authored
      This change reduces mmap_sem hold times that are caused by waiting for
      disk transfers when accessing file mapped VMAs.
      
      It introduces the VM_FAULT_ALLOW_RETRY flag, which indicates that the call
      site wants mmap_sem to be released if blocking on a pending disk transfer.
      In that case, filemap_fault() returns the VM_FAULT_RETRY status bit and
      do_page_fault() will then re-acquire mmap_sem and retry the page fault.
      
      It is expected that the retry will hit the same page which will now be
      cached, and thus it will complete with a low mmap_sem hold time.
      
      Tests:
      
      - microbenchmark: thread A mmaps a large file and does random read accesses
        to the mmaped area - achieves about 55 iterations/s. Thread B does
        mmap/munmap in a loop at a separate location - achieves 55 iterations/s
        before, 15000 iterations/s after.
      
      - We are seeing related effects in some applications in house, which show
        significant performance regressions when running without this change.
      
      [akpm@linux-foundation.org: fix warning & crash]
      Signed-off-by: default avatarMichel Lespinasse <walken@google.com>
      Acked-by: default avatarRik van Riel <riel@redhat.com>
      Acked-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Cc: Nick Piggin <nickpiggin@yahoo.com.au>
      Reviewed-by: default avatarWu Fengguang <fengguang.wu@intel.com>
      Cc: Ying Han <yinghan@google.com>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Acked-by: default avatar"H. Peter Anvin" <hpa@zytor.com>
      Cc: <linux-arch@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d065bd81
    • Michel Lespinasse's avatar
      mm: filemap_fault: unique path for locking page · b522c94d
      Michel Lespinasse authored
      Introduce a single location where filemap_fault() locks the desired page.
      There used to be two such places, depending if the initial find_get_page()
      was successful or not.
      Signed-off-by: default avatarMichel Lespinasse <walken@google.com>
      Acked-by: default avatarRik van Riel <riel@redhat.com>
      Acked-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Cc: Nick Piggin <nickpiggin@yahoo.com.au>
      Reviewed-by: default avatarWu Fengguang <fengguang.wu@intel.com>
      Cc: Ying Han <yinghan@google.com>
      Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: <linux-arch@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b522c94d
    • Richard Kennedy's avatar
      mm: remove alignment padding from anon_vma on (some) 64 bit builds · 182fea8f
      Richard Kennedy authored
      Reorder structure anon_vma to remove alignment padding on 64 builds when
      (CONFIG_KSM || CONFIG_MIGRATION).
      This will shrink the size of the anon_vma structure from 40 to 32 bytes
      & allow more objects per slab in its kmem_cache.
      
      Under slub the objects in the anon_vma kmem_cache will then be 40 bytes
      with 102 objects per slab.  (On v2.6.36 without this patch,the size is 48
      bytes and 85 objects/slab.)
      Signed-off-by: default avatarRichard Kennedy <richard@rsk.demon.co.uk>
      Reviewed-by: default avatarRik van Riel <riel@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      182fea8f
    • Dima Zavin's avatar
      mm: add a might_sleep_if() to dma_pool_alloc() · ea05c844
      Dima Zavin authored
      Buggy drivers (e.g.  fsl_udc) could call dma_pool_alloc from atomic
      context with GFP_KERNEL.  In most instances, the first pool_alloc_page
      call would succeed and the sleeping functions would never be called.  This
      allowed the buggy drivers to slip through the cracks.
      
      Add a might_sleep_if() checking for __GFP_WAIT in flags.
      Signed-off-by: default avatarDima Zavin <dima@android.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ea05c844
    • Peter Zijlstra's avatar
      mm: highmem documentation · d65bfacb
      Peter Zijlstra authored
      Document outlining some of the highmem issues, started by me, edited by
      David.
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      Signed-off-by: default avatarPeter Zijlstra <a.p.zijlstra@chello.nl>
      Acked-by: default avatarChris Metcalf <cmetcalf@tilera.com>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: David Miller <davem@davemloft.net>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d65bfacb
    • Peter Zijlstra's avatar
      perf, x86: Fix up kmap_atomic() type · 7a837d1b
      Peter Zijlstra authored
      Now that the KM_type stuff is history, clean up the compiler warning.
      Signed-off-by: default avatarPeter Zijlstra <a.p.zijlstra@chello.nl>
      Acked-by: default avatarChris Metcalf <cmetcalf@tilera.com>
      Cc: David Howells <dhowells@redhat.com>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: David Miller <davem@davemloft.net>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      7a837d1b
    • Peter Zijlstra's avatar
      mm: remove pte_*map_nested() · ece0e2b6
      Peter Zijlstra authored
      Since we no longer need to provide KM_type, the whole pte_*map_nested()
      API is now redundant, remove it.
      Signed-off-by: default avatarPeter Zijlstra <a.p.zijlstra@chello.nl>
      Acked-by: default avatarChris Metcalf <cmetcalf@tilera.com>
      Cc: David Howells <dhowells@redhat.com>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: David Miller <davem@davemloft.net>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ece0e2b6
    • Peter Zijlstra's avatar
      mm: stack based kmap_atomic() · 3e4d3af5
      Peter Zijlstra authored
      Keep the current interface but ignore the KM_type and use a stack based
      approach.
      
      The advantage is that we get rid of crappy code like:
      
      	#define __KM_PTE			\
      		(in_nmi() ? KM_NMI_PTE : 	\
      		 in_irq() ? KM_IRQ_PTE :	\
      		 KM_PTE0)
      
      and in general can stop worrying about what context we're in and what kmap
      slots might be appropriate for that.
      
      The downside is that FRV kmap_atomic() gets more expensive.
      
      For now we use a CPP trick suggested by Andrew:
      
        #define kmap_atomic(page, args...) __kmap_atomic(page)
      
      to avoid having to touch all kmap_atomic() users in a single patch.
      
      [ not compiled on:
        - mn10300: the arch doesn't actually build with highmem to begin with ]
      
      [akpm@linux-foundation.org: coding-style fixes]
      [akpm@linux-foundation.org: fix up drivers/gpu/drm/i915/intel_overlay.c]
      Acked-by: default avatarRik van Riel <riel@redhat.com>
      Signed-off-by: default avatarPeter Zijlstra <a.p.zijlstra@chello.nl>
      Acked-by: default avatarChris Metcalf <cmetcalf@tilera.com>
      Cc: David Howells <dhowells@redhat.com>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: David Miller <davem@davemloft.net>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Dave Airlie <airlied@linux.ie>
      Cc: Li Zefan <lizf@cn.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3e4d3af5
    • Peter Zijlstra's avatar
      mm: strictly nested kmap_atomic() · 61ecdb80
      Peter Zijlstra authored
      Ensure kmap_atomic() usage is strictly nested
      Signed-off-by: default avatarPeter Zijlstra <a.p.zijlstra@chello.nl>
      Reviewed-by: default avatarRik van Riel <riel@redhat.com>
      Acked-by: default avatarChris Metcalf <cmetcalf@tilera.com>
      Cc: David Howells <dhowells@redhat.com>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: David Miller <davem@davemloft.net>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      61ecdb80
    • KOSAKI Motohiro's avatar
      vmscan,tmpfs: treat used once pages on tmpfs as used once · 2e30244a
      KOSAKI Motohiro authored
      When a page has PG_referenced, shrink_page_list() discards it only if it
      is not dirty.  This rule works fine if the backing filesystem is a regular
      one.  PG_dirty is a good signal that the page was used recently because
      the flusher threads clean pages periodically.  In addition, page writeback
      is costlier than simple page discard.
      
      However, when a page is on tmpfs this heuristic doesn't work because
      flusher threads don't write back tmpfs pages.  Consequently tmpfs pages
      always rotate around the lru twice at least and adds unnecessary lru
      churn.  Simple tmpfs streaming io shouldn't cause large anonymous page
      swap-out.
      
      Remove this unncessary reclaim bonus of tmpfs pages.
      Signed-off-by: default avatarKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Hugh Dickins <hughd@google.com>
      Reviewed-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Reviewed-by: default avatarRik van Riel <riel@redhat.com>
      Cc: Minchan Kim <minchan.kim@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      2e30244a
    • Wu Fengguang's avatar
      writeback: remove the internal 5% low bound on dirty_ratio · 4cbec4c8
      Wu Fengguang authored
      The dirty_ratio was silently limited in global_dirty_limits() to >= 5%.
      This is not a user expected behavior.  And it's inconsistent with
      calc_period_shift(), which uses the plain vm_dirty_ratio value.
      
      Let's remove the internal bound.
      
      At the same time, fix balance_dirty_pages() to work with the
      dirty_thresh=0 case.  This allows applications to proceed when
      dirty+writeback pages are all cleaned.
      
      And ">" fits with the name "exceeded" better than ">=" does.  Neil thinks
      it is an aesthetic improvement as well as a functional one :)
      Signed-off-by: default avatarWu Fengguang <fengguang.wu@intel.com>
      Cc: Jan Kara <jack@suse.cz>
      Proposed-by: default avatarCon Kolivas <kernel@kolivas.org>
      Acked-by: default avatarPeter Zijlstra <a.p.zijlstra@chello.nl>
      Reviewed-by: default avatarRik van Riel <riel@redhat.com>
      Reviewed-by: default avatarNeil Brown <neilb@suse.de>
      Reviewed-by: default avatarKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Michael Rubin <mrubin@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      4cbec4c8
    • Mel Gorman's avatar
      writeback: do not sleep on the congestion queue if there are no congested BDIs... · 0e093d99
      Mel Gorman authored
      writeback: do not sleep on the congestion queue if there are no congested BDIs or if significant congestion is not being encountered in the current zone
      
      If congestion_wait() is called with no BDI congested, the caller will
      sleep for the full timeout and this may be an unnecessary sleep.  This
      patch adds a wait_iff_congested() that checks congestion and only sleeps
      if a BDI is congested else, it calls cond_resched() to ensure the caller
      is not hogging the CPU longer than its quota but otherwise will not sleep.
      
      This is aimed at reducing some of the major desktop stalls reported during
      IO.  For example, while kswapd is operating, it calls congestion_wait()
      but it could just have been reclaiming clean page cache pages with no
      congestion.  Without this patch, it would sleep for a full timeout but
      after this patch, it'll just call schedule() if it has been on the CPU too
      long.  Similar logic applies to direct reclaimers that are not making
      enough progress.
      Signed-off-by: default avatarMel Gorman <mel@csn.ul.ie>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Minchan Kim <minchan.kim@gmail.com>
      Cc: Wu Fengguang <fengguang.wu@intel.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Jens Axboe <axboe@kernel.dk>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      0e093d99
    • KOSAKI Motohiro's avatar
      vmscan: isolate_lru_pages(): stop neighbour search if neighbour cannot be isolated · 08fc468f
      KOSAKI Motohiro authored
      isolate_lru_pages() does not just isolate LRU tail pages, but also
      isolates neighbour pages of the eviction page.  The neighbour search does
      not stop even if neighbours cannot be isolated which is excessive as the
      lumpy reclaim will no longer result in a successful higher order
      allocation.  This patch stops the PFN neighbour pages if an isolation
      fails and moves on to the next block.
      Signed-off-by: default avatarKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Signed-off-by: default avatarMel Gorman <mel@csn.ul.ie>
      Reviewed-by: default avatarWu Fengguang <fengguang.wu@intel.com>
      Reviewed-by: default avatarMinchan Kim <minchan.kim@gmail.com>
      Reviewed-by: default avatarKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Rik van Riel <riel@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      08fc468f
    • KOSAKI Motohiro's avatar
      vmscan: remove dead code in shrink_inactive_list() · 47185052
      KOSAKI Motohiro authored
      After synchrounous lumpy reclaim, the page_list is guaranteed to not have
      active pages as page activation in shrink_page_list() disables lumpy
      reclaim.  Remove the dead code.
      Signed-off-by: default avatarKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Signed-off-by: default avatarMel Gorman <mel@csn.ul.ie>
      Reviewed-by: default avatarMinchan Kim <minchan.kim@gmail.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Wu Fengguang <fengguang.wu@intel.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      47185052
    • KOSAKI Motohiro's avatar
      vmscan: narrow the scenarios in whcih lumpy reclaim uses synchrounous reclaim · 7d3579e8
      KOSAKI Motohiro authored
      shrink_page_list() can decide to give up reclaiming a page under a
      number of conditions such as
      
        1. trylock_page() failure
        2. page is unevictable
        3. zone reclaim and page is mapped
        4. PageWriteback() is true
        5. page is swapbacked and swap is full
        6. add_to_swap() failure
        7. page is dirty and gfpmask don't have GFP_IO, GFP_FS
        8. page is pinned
        9. IO queue is congested
       10. pageout() start IO, but not finished
      
      With lumpy reclaim, failures result in entering synchronous lumpy reclaim
      but this can be unnecessary.  In cases (2), (3), (5), (6), (7) and (8),
      there is no point retrying.  This patch causes lumpy reclaim to abort when
      it is known it will fail.
      
      Case (9) is more interesting. current behavior is,
        1. start shrink_page_list(async)
        2. found queue_congested()
        3. skip pageout write
        4. still start shrink_page_list(sync)
        5. wait on a lot of pages
        6. again, found queue_congested()
        7. give up pageout write again
      
      So, it's useless time wasting.  However, just skipping page reclaim is
      also notgood as x86 allocating a huge page needs 512 pages for example.
      It can have more dirty pages than queue congestion threshold (~=128).
      
      After this patch, pageout() behaves as follows;
      
       - If order > PAGE_ALLOC_COSTLY_ORDER
      	Ignore queue congestion always.
       - If order <= PAGE_ALLOC_COSTLY_ORDER
      	skip write page and disable lumpy reclaim.
      Signed-off-by: default avatarKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Signed-off-by: default avatarMel Gorman <mel@csn.ul.ie>
      Reviewed-by: default avatarKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Minchan Kim <minchan.kim@gmail.com>
      Cc: Wu Fengguang <fengguang.wu@intel.com>
      Cc: Rik van Riel <riel@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      7d3579e8
    • KOSAKI Motohiro's avatar
      vmscan: synchronous lumpy reclaim should not call congestion_wait() · bc57e00f
      KOSAKI Motohiro authored
      congestion_wait() means "wait until queue congestion is cleared".
      However, synchronous lumpy reclaim does not need this congestion_wait() as
      shrink_page_list(PAGEOUT_IO_SYNC) uses wait_on_page_writeback() and it
      provides the necessary waiting.
      Signed-off-by: default avatarKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Signed-off-by: default avatarMel Gorman <mel@csn.ul.ie>
      Reviewed-by: default avatarMinchan Kim <minchan.kim@gmail.com>
      Reviewed-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Reviewed-by: default avatarWu Fengguang <fengguang.wu@intel.com>
      Reviewed-by: default avatarKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Rik van Riel <riel@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      bc57e00f
    • Mel Gorman's avatar
      writeback: account for time spent congestion_waited · 52bb9198
      Mel Gorman authored
      There is strong evidence to indicate a lot of time is being spent in
      congestion_wait(), some of it unnecessarily.  This patch adds a tracepoint
      for congestion_wait to record when congestion_wait() was called, how long
      the timeout was for and how long it actually slept.
      Signed-off-by: default avatarMel Gorman <mel@csn.ul.ie>
      Reviewed-by: default avatarMinchan Kim <minchan.kim@gmail.com>
      Reviewed-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Cc: Wu Fengguang <fengguang.wu@intel.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Rik van Riel <riel@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      52bb9198
    • Mel Gorman's avatar
      tracing, vmscan: add trace events for LRU list shrinking · e11da5b4
      Mel Gorman authored
      There have been numerous reports of stalls that pointed at the problem
      being somewhere in the VM.  There are multiple roots to the problems which
      means dealing with any of the root problems in isolation is tricky to
      justify on their own and they would still need integration testing.  This
      patch series puts together two different patch sets which in combination
      should tackle some of the root causes of latency problems being reported.
      
      Patch 1 adds a tracepoint for shrink_inactive_list.  For this series, the
      most important results is being able to calculate the scanning/reclaim
      ratio as a measure of the amount of work being done by page reclaim.
      
      Patch 2 accounts for time spent in congestion_wait.
      
      Patches 3-6 were originally developed by Kosaki Motohiro but reworked for
      this series.  It has been noted that lumpy reclaim is far too aggressive
      and trashes the system somewhat.  As SLUB uses high-order allocations, a
      large cost incurred by lumpy reclaim will be noticeable.  It was also
      reported during transparent hugepage support testing that lumpy reclaim
      was trashing the system and these patches should mitigate that problem
      without disabling lumpy reclaim.
      
      Patch 7 adds wait_iff_congested() and replaces some callers of
      congestion_wait().  wait_iff_congested() only sleeps if there is a BDI
      that is currently congested.  Patch 8 notes that any BDI being congested
      is not necessarily a problem because there could be multiple BDIs of
      varying speeds and numberous zones.  It attempts to track when a zone
      being reclaimed contains many pages backed by a congested BDI and if so,
      reclaimers wait on the congestion queue.
      
      I ran a number of tests with monitoring on X86, X86-64 and PPC64. Each
      machine had 3G of RAM and the CPUs were
      
      X86:    Intel P4 2-core
      X86-64: AMD Phenom 4-core
      PPC64:  PPC970MP
      
      Each used a single disk and the onboard IO controller.  Dirty ratio was
      left at 20.  I'm just going to report for X86-64 and PPC64 in a vague
      attempt to keep this report short.  Four kernels were tested each based on
      v2.6.36-rc4
      
      traceonly-v2r2:     Patches 1 and 2 to instrument vmscan reclaims and congestion_wait
      lowlumpy-v2r3:      Patches 1-6 to test if lumpy reclaim is better
      waitcongest-v2r3:   Patches 1-7 to only wait on congestion
      waitwriteback-v2r4: Patches 1-8 to detect when a zone is congested
      
      nocongest-v1r5: Patches 1-3 for testing wait_iff_congestion
      nodirect-v1r5:  Patches 1-10 to disable filesystem writeback for better IO
      
      The tests run were as follows
      
      kernbench
      	compile-based benchmark. Smoke test performance
      
      sysbench
      	OLTP read-only benchmark. Will be re-run in the future as read-write
      
      micro-mapped-file-stream
      	This is a micro-benchmark from Johannes Weiner that accesses a
      	large sparse-file through mmap(). It was configured to run in only
      	single-CPU mode but can be indicative of how well page reclaim
      	identifies suitable pages.
      
      stress-highalloc
      	Tries to allocate huge pages under heavy load.
      
      kernbench, iozone and sysbench did not report any performance regression
      on any machine.  sysbench did pressure the system lightly and there was
      reclaim activity but there were no difference of major interest between
      the kernels.
      
      X86-64 micro-mapped-file-stream
      
                                            traceonly-v2r2           lowlumpy-v2r3        waitcongest-v2r3     waitwriteback-v2r4
      pgalloc_dma                       1639.00 (   0.00%)       667.00 (-145.73%)      1167.00 ( -40.45%)       578.00 (-183.56%)
      pgalloc_dma32                  2842410.00 (   0.00%)   2842626.00 (   0.01%)   2843043.00 (   0.02%)   2843014.00 (   0.02%)
      pgalloc_normal                       0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
      pgsteal_dma                        729.00 (   0.00%)        85.00 (-757.65%)       609.00 ( -19.70%)       125.00 (-483.20%)
      pgsteal_dma32                  2338721.00 (   0.00%)   2447354.00 (   4.44%)   2429536.00 (   3.74%)   2436772.00 (   4.02%)
      pgsteal_normal                       0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
      pgscan_kswapd_dma                 1469.00 (   0.00%)       532.00 (-176.13%)      1078.00 ( -36.27%)       220.00 (-567.73%)
      pgscan_kswapd_dma32            4597713.00 (   0.00%)   4503597.00 (  -2.09%)   4295673.00 (  -7.03%)   3891686.00 ( -18.14%)
      pgscan_kswapd_normal                 0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
      pgscan_direct_dma                   71.00 (   0.00%)       134.00 (  47.01%)       243.00 (  70.78%)       352.00 (  79.83%)
      pgscan_direct_dma32             305820.00 (   0.00%)    280204.00 (  -9.14%)    600518.00 (  49.07%)    957485.00 (  68.06%)
      pgscan_direct_normal                 0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
      pageoutrun                       16296.00 (   0.00%)     21254.00 (  23.33%)     18447.00 (  11.66%)     20067.00 (  18.79%)
      allocstall                         443.00 (   0.00%)       273.00 ( -62.27%)       513.00 (  13.65%)      1568.00 (  71.75%)
      
      These are based on the raw figures taken from /proc/vmstat.  It's a rough
      measure of reclaim activity.  Note that allocstall counts are higher
      because we are entering direct reclaim more often as a result of not
      sleeping in congestion.  In itself, it's not necessarily a bad thing.
      It's easier to get a view of what happened from the vmscan tracepoint
      report.
      
      FTrace Reclaim Statistics: vmscan
      
                                      traceonly-v2r2   lowlumpy-v2r3 waitcongest-v2r3 waitwriteback-v2r4
      Direct reclaims                                443        273        513       1568
      Direct reclaim pages scanned                305968     280402     600825     957933
      Direct reclaim pages reclaimed               43503      19005      30327     117191
      Direct reclaim write file async I/O              0          0          0          0
      Direct reclaim write anon async I/O              0          3          4         12
      Direct reclaim write file sync I/O               0          0          0          0
      Direct reclaim write anon sync I/O               0          0          0          0
      Wake kswapd requests                        187649     132338     191695     267701
      Kswapd wakeups                                   3          1          4          1
      Kswapd pages scanned                       4599269    4454162    4296815    3891906
      Kswapd pages reclaimed                     2295947b    2428434    2399818    2319706
      Kswapd reclaim write file async I/O              1          0          1          1
      Kswapd reclaim write anon async I/O             59        187         41        222
      Kswapd reclaim write file sync I/O               0          0          0          0
      Kswapd reclaim write anon sync I/O               0          0          0          0
      Time stalled direct reclaim (seconds)         4.34       2.52       6.63       2.96
      Time kswapd awake (seconds)                  11.15      10.25      11.01      10.19
      
      Total pages scanned                        4905237   4734564   4897640   4849839
      Total pages reclaimed                      2339450   2447439   2430145   2436897
      %age total pages scanned/reclaimed          47.69%    51.69%    49.62%    50.25%
      %age total pages scanned/written             0.00%     0.00%     0.00%     0.00%
      %age  file pages scanned/written             0.00%     0.00%     0.00%     0.00%
      Percentage Time Spent Direct Reclaim        29.23%    19.02%    38.48%    20.25%
      Percentage Time kswapd Awake                78.58%    78.85%    76.83%    79.86%
      
      What is interesting here for nocongest in particular is that while direct
      reclaim scans more pages, the overall number of pages scanned remains the
      same and the ratio of pages scanned to pages reclaimed is more or less the
      same.  In other words, while we are sleeping less, reclaim is not doing
      more work and as direct reclaim and kswapd is awake for less time, it
      would appear to be doing less work.
      
      FTrace Reclaim Statistics: congestion_wait
      Direct number congest     waited                87        196         64          0
      Direct time   congest     waited            4604ms     4732ms     5420ms        0ms
      Direct full   congest     waited                72        145         53          0
      Direct number conditional waited                 0          0        324       1315
      Direct time   conditional waited               0ms        0ms        0ms        0ms
      Direct full   conditional waited                 0          0          0          0
      KSwapd number congest     waited                20         10         15          7
      KSwapd time   congest     waited            1264ms      536ms      884ms      284ms
      KSwapd full   congest     waited                10          4          6          2
      KSwapd number conditional waited                 0          0          0          0
      KSwapd time   conditional waited               0ms        0ms        0ms        0ms
      KSwapd full   conditional waited                 0          0          0          0
      
      The vanilla kernel spent 8 seconds asleep in direct reclaim and no time at
      all asleep with the patches.
      
      MMTests Statistics: duration
      User/Sys Time Running Test (seconds)         10.51     10.73      10.6     11.66
      Total Elapsed Time (seconds)                 14.19     13.00     14.33     12.76
      
      Overall, the tests completed faster. It is interesting to note that backing off further
      when a zone is congested and not just a BDI was more efficient overall.
      
      PPC64 micro-mapped-file-stream
      pgalloc_dma                    3024660.00 (   0.00%)   3027185.00 (   0.08%)   3025845.00 (   0.04%)   3026281.00 (   0.05%)
      pgalloc_normal                       0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
      pgsteal_dma                    2508073.00 (   0.00%)   2565351.00 (   2.23%)   2463577.00 (  -1.81%)   2532263.00 (   0.96%)
      pgsteal_normal                       0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
      pgscan_kswapd_dma              4601307.00 (   0.00%)   4128076.00 ( -11.46%)   3912317.00 ( -17.61%)   3377165.00 ( -36.25%)
      pgscan_kswapd_normal                 0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
      pgscan_direct_dma               629825.00 (   0.00%)    971622.00 (  35.18%)   1063938.00 (  40.80%)   1711935.00 (  63.21%)
      pgscan_direct_normal                 0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)         0.00 (   0.00%)
      pageoutrun                       27776.00 (   0.00%)     20458.00 ( -35.77%)     18763.00 ( -48.04%)     18157.00 ( -52.98%)
      allocstall                         977.00 (   0.00%)      2751.00 (  64.49%)      2098.00 (  53.43%)      5136.00 (  80.98%)
      
      Similar trends to x86-64. allocstalls are up but it's not necessarily bad.
      
      FTrace Reclaim Statistics: vmscan
      Direct reclaims                                977       2709       2098       5136
      Direct reclaim pages scanned                629825     963814    1063938    1711935
      Direct reclaim pages reclaimed               75550     242538     150904     387647
      Direct reclaim write file async I/O              0          0          0          2
      Direct reclaim write anon async I/O              0         10          0          4
      Direct reclaim write file sync I/O               0          0          0          0
      Direct reclaim write anon sync I/O               0          0          0          0
      Wake kswapd requests                        392119    1201712     571935     571921
      Kswapd wakeups                                   3          2          3          3
      Kswapd pages scanned                       4601307    4128076    3912317    3377165
      Kswapd pages reclaimed                     2432523    2318797    2312673    2144616
      Kswapd reclaim write file async I/O             20          1          1          1
      Kswapd reclaim write anon async I/O             57        132         11        121
      Kswapd reclaim write file sync I/O               0          0          0          0
      Kswapd reclaim write anon sync I/O               0          0          0          0
      Time stalled direct reclaim (seconds)         6.19       7.30      13.04      10.88
      Time kswapd awake (seconds)                  21.73      26.51      25.55      23.90
      
      Total pages scanned                        5231132   5091890   4976255   5089100
      Total pages reclaimed                      2508073   2561335   2463577   2532263
      %age total pages scanned/reclaimed          47.95%    50.30%    49.51%    49.76%
      %age total pages scanned/written             0.00%     0.00%     0.00%     0.00%
      %age  file pages scanned/written             0.00%     0.00%     0.00%     0.00%
      Percentage Time Spent Direct Reclaim        18.89%    20.65%    32.65%    27.65%
      Percentage Time kswapd Awake                72.39%    80.68%    78.21%    77.40%
      
      Again, a similar trend that the congestion_wait changes mean that direct
      reclaim scans more pages but the overall number of pages scanned while
      slightly reduced, are very similar.  The ratio of scanning/reclaimed
      remains roughly similar.  The downside is that kswapd and direct reclaim
      was awake longer and for a larger percentage of the overall workload.
      It's possible there were big differences in the amount of time spent
      reclaiming slab pages between the different kernels which is plausible
      considering that the micro tests runs after fsmark and sysbench.
      
      Trace Reclaim Statistics: congestion_wait
      Direct number congest     waited               845       1312        104          0
      Direct time   congest     waited           19416ms    26560ms     7544ms        0ms
      Direct full   congest     waited               745       1105         72          0
      Direct number conditional waited                 0          0       1322       2935
      Direct time   conditional waited               0ms        0ms       12ms      312ms
      Direct full   conditional waited                 0          0          0          3
      KSwapd number congest     waited                39        102         75         63
      KSwapd time   congest     waited            2484ms     6760ms     5756ms     3716ms
      KSwapd full   congest     waited                20         48         46         25
      KSwapd number conditional waited                 0          0          0          0
      KSwapd time   conditional waited               0ms        0ms        0ms        0ms
      KSwapd full   conditional waited                 0          0          0          0
      
      The vanilla kernel spent 20 seconds asleep in direct reclaim and only
      312ms asleep with the patches.  The time kswapd spent congest waited was
      also reduced by a large factor.
      
      MMTests Statistics: duration
      ser/Sys Time Running Test (seconds)         26.58     28.05      26.9     28.47
      Total Elapsed Time (seconds)                 30.02     32.86     32.67     30.88
      
      With all patches applies, the completion times are very similar.
      
      X86-64 STRESS-HIGHALLOC
                      traceonly-v2r2     lowlumpy-v2r3  waitcongest-v2r3waitwriteback-v2r4
      Pass 1          82.00 ( 0.00%)    84.00 ( 2.00%)    85.00 ( 3.00%)    85.00 ( 3.00%)
      Pass 2          90.00 ( 0.00%)    87.00 (-3.00%)    88.00 (-2.00%)    89.00 (-1.00%)
      At Rest         92.00 ( 0.00%)    90.00 (-2.00%)    90.00 (-2.00%)    91.00 (-1.00%)
      
      Success figures across the board are broadly similar.
      
                      traceonly-v2r2     lowlumpy-v2r3  waitcongest-v2r3waitwriteback-v2r4
      Direct reclaims                               1045        944        886        887
      Direct reclaim pages scanned                135091     119604     109382     101019
      Direct reclaim pages reclaimed               88599      47535      47863      46671
      Direct reclaim write file async I/O            494        283        465        280
      Direct reclaim write anon async I/O          29357      13710      16656      13462
      Direct reclaim write file sync I/O             154          2          2          3
      Direct reclaim write anon sync I/O           14594        571        509        561
      Wake kswapd requests                          7491        933        872        892
      Kswapd wakeups                                 814        778        731        780
      Kswapd pages scanned                       7290822   15341158   11916436   13703442
      Kswapd pages reclaimed                     3587336    3142496    3094392    3187151
      Kswapd reclaim write file async I/O          91975      32317      28022      29628
      Kswapd reclaim write anon async I/O        1992022     789307     829745     849769
      Kswapd reclaim write file sync I/O               0          0          0          0
      Kswapd reclaim write anon sync I/O               0          0          0          0
      Time stalled direct reclaim (seconds)      4588.93    2467.16    2495.41    2547.07
      Time kswapd awake (seconds)                2497.66    1020.16    1098.06    1176.82
      
      Total pages scanned                        7425913  15460762  12025818  13804461
      Total pages reclaimed                      3675935   3190031   3142255   3233822
      %age total pages scanned/reclaimed          49.50%    20.63%    26.13%    23.43%
      %age total pages scanned/written            28.66%     5.41%     7.28%     6.47%
      %age  file pages scanned/written             1.25%     0.21%     0.24%     0.22%
      Percentage Time Spent Direct Reclaim        57.33%    42.15%    42.41%    42.99%
      Percentage Time kswapd Awake                43.56%    27.87%    29.76%    31.25%
      
      Scanned/reclaimed ratios again look good with big improvements in
      efficiency.  The Scanned/written ratios also look much improved.  With a
      better scanned/written ration, there is an expectation that IO would be
      more efficient and indeed, the time spent in direct reclaim is much
      reduced by the full series and kswapd spends a little less time awake.
      
      Overall, indications here are that allocations were happening much faster
      and this can be seen with a graph of the latency figures as the
      allocations were taking place
      http://www.csn.ul.ie/~mel/postings/vmscanreduce-20101509/highalloc-interlatency-hydra-mean.ps
      
      FTrace Reclaim Statistics: congestion_wait
      Direct number congest     waited              1333        204        169          4
      Direct time   congest     waited           78896ms     8288ms     7260ms      200ms
      Direct full   congest     waited               756         92         69          2
      Direct number conditional waited                 0          0         26        186
      Direct time   conditional waited               0ms        0ms        0ms     2504ms
      Direct full   conditional waited                 0          0          0         25
      KSwapd number congest     waited                 4        395        227        282
      KSwapd time   congest     waited             384ms    25136ms    10508ms    18380ms
      KSwapd full   congest     waited                 3        232         98        176
      KSwapd number conditional waited                 0          0          0          0
      KSwapd time   conditional waited               0ms        0ms        0ms        0ms
      KSwapd full   conditional waited                 0          0          0          0
      KSwapd full   conditional waited               318          0        312          9
      
      Overall, the time spent speeping is reduced.  kswapd is still hitting
      congestion_wait() but that is because there are callers remaining where it
      wasn't clear in advance if they should be changed to wait_iff_congested()
      or not.  Overall the sleep imes are reduced though - from 79ish seconds to
      about 19.
      
      MMTests Statistics: duration
      User/Sys Time Running Test (seconds)       3415.43   3386.65   3388.39    3377.5
      Total Elapsed Time (seconds)               5733.48   3660.33   3689.41   3765.39
      
      With the full series, the time to complete the tests are reduced by 30%
      
      PPC64 STRESS-HIGHALLOC
                      traceonly-v2r2     lowlumpy-v2r3  waitcongest-v2r3waitwriteback-v2r4
      Pass 1          17.00 ( 0.00%)    34.00 (17.00%)    38.00 (21.00%)    43.00 (26.00%)
      Pass 2          25.00 ( 0.00%)    37.00 (12.00%)    42.00 (17.00%)    46.00 (21.00%)
      At Rest         49.00 ( 0.00%)    43.00 (-6.00%)    45.00 (-4.00%)    51.00 ( 2.00%)
      
      Success rates there are *way* up particularly considering that the 16MB
      huge pages on PPC64 mean that it's always much harder to allocate them.
      
      FTrace Reclaim Statistics: vmscan
                    stress-highalloc  stress-highalloc  stress-highalloc  stress-highalloc
                      traceonly-v2r2     lowlumpy-v2r3  waitcongest-v2r3waitwriteback-v2r4
      Direct reclaims                                499        505        564        509
      Direct reclaim pages scanned                223478      41898      51818      45605
      Direct reclaim pages reclaimed              137730      21148      27161      23455
      Direct reclaim write file async I/O            399        136        162        136
      Direct reclaim write anon async I/O          46977       2865       4686       3998
      Direct reclaim write file sync I/O              29          0          1          3
      Direct reclaim write anon sync I/O           31023        159        237        239
      Wake kswapd requests                           420        351        360        326
      Kswapd wakeups                                 185        294        249        277
      Kswapd pages scanned                      15703488   16392500   17821724   17598737
      Kswapd pages reclaimed                     5808466    2908858    3139386    3145435
      Kswapd reclaim write file async I/O         159938      18400      18717      13473
      Kswapd reclaim write anon async I/O        3467554     228957     322799     234278
      Kswapd reclaim write file sync I/O               0          0          0          0
      Kswapd reclaim write anon sync I/O               0          0          0          0
      Time stalled direct reclaim (seconds)      9665.35    1707.81    2374.32    1871.23
      Time kswapd awake (seconds)                9401.21    1367.86    1951.75    1328.88
      
      Total pages scanned                       15926966  16434398  17873542  17644342
      Total pages reclaimed                      5946196   2930006   3166547   3168890
      %age total pages scanned/reclaimed          37.33%    17.83%    17.72%    17.96%
      %age total pages scanned/written            23.27%     1.52%     1.94%     1.43%
      %age  file pages scanned/written             1.01%     0.11%     0.11%     0.08%
      Percentage Time Spent Direct Reclaim        44.55%    35.10%    41.42%    36.91%
      Percentage Time kswapd Awake                86.71%    43.58%    52.67%    41.14%
      
      While the scanning rates are slightly up, the scanned/reclaimed and
      scanned/written figures are much improved.  The time spent in direct
      reclaim and with kswapd are massively reduced, mostly by the lowlumpy
      patches.
      
      FTrace Reclaim Statistics: congestion_wait
      Direct number congest     waited               725        303        126          3
      Direct time   congest     waited           45524ms     9180ms     5936ms      300ms
      Direct full   congest     waited               487        190         52          3
      Direct number conditional waited                 0          0        200        301
      Direct time   conditional waited               0ms        0ms        0ms     1904ms
      Direct full   conditional waited                 0          0          0         19
      KSwapd number congest     waited                 0          2         23          4
      KSwapd time   congest     waited               0ms      200ms      420ms      404ms
      KSwapd full   congest     waited                 0          2          2          4
      KSwapd number conditional waited                 0          0          0          0
      KSwapd time   conditional waited               0ms        0ms        0ms        0ms
      KSwapd full   conditional waited                 0          0          0          0
      
      Not as dramatic a story here but the time spent asleep is reduced and we
      can still see what wait_iff_congested is going to sleep when necessary.
      
      MMTests Statistics: duration
      User/Sys Time Running Test (seconds)      12028.09   3157.17   3357.79   3199.16
      Total Elapsed Time (seconds)              10842.07   3138.72   3705.54   3229.85
      
      The time to complete this test goes way down.  With the full series, we
      are allocating over twice the number of huge pages in 30% of the time and
      there is a corresponding impact on the allocation latency graph available
      at.
      
      http://www.csn.ul.ie/~mel/postings/vmscanreduce-20101509/highalloc-interlatency-powyah-mean.ps
      
      This patch:
      
      Add a trace event for shrink_inactive_list() and updates the sample
      postprocessing script appropriately.  It can be used to determine how many
      pages were reclaimed and for non-lumpy reclaim where exactly the pages
      were reclaimed from.
      Signed-off-by: default avatarMel Gorman <mel@csn.ul.ie>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Minchan Kim <minchan.kim@gmail.com>
      Cc: Wu Fengguang <fengguang.wu@intel.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Rik van Riel <riel@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e11da5b4
    • Shaohua Li's avatar
      vmscan: delete dead code · 66d9a986
      Shaohua Li authored
      `priority' cannot be negative here.  And the comment is obsolete.
      Signed-off-by: default avatarShaohua Li <shaohua.li@intel.com>
      Reviewed-by: default avatarKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      66d9a986
    • Will Deacon's avatar
      mm: fix typo in mm.h when NODE_NOT_IN_PAGE_FLAGS · bce54bbf
      Will Deacon authored
      NODE_NOT_IN_PAGE_FLAGS is defined in mm.h when the node information is not
      stored in the page flags bitmap.
      
      Unfortunately, there's a typo in one of the checks for it.  This patch
      fixes it (s/NODE_NOT_IN_PAGEFLAGS/NODE_NOT_IN_PAGE_FLAGS/).  Since this
      has been around for ages, I doubt it's been causing any serious problems.
      Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
      Cc: Christoph Lameter <clameter@sgi.com>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      bce54bbf
    • Michael Rubin's avatar
      writeback: report dirty thresholds in /proc/vmstat · 79da826a
      Michael Rubin authored
      The kernel already exposes the user desired thresholds in /proc/sys/vm
      with dirty_background_ratio and background_ratio.  But the kernel may
      alter the number requested without giving the user any indication that is
      the case.
      
      Knowing the actual ratios the kernel is honoring can help app developers
      understand how their buffered IO will be sent to the disk.
      
              $ grep threshold /proc/vmstat
              nr_dirty_threshold 409111
              nr_dirty_background_threshold 818223
      Signed-off-by: default avatarMichael Rubin <mrubin@google.com>
      Cc: Wu Fengguang <fengguang.wu@intel.com>
      Cc: Dave Chinner <david@fromorbit.com>
      Cc: Jens Axboe <axboe@kernel.dk>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Nick Piggin <nickpiggin@yahoo.com.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      79da826a
    • Michael Rubin's avatar
      writeback: add /sys/devices/system/node/<node>/vmstat · 2ac39037
      Michael Rubin authored
      For NUMA node systems it is important to have visibility in memory
      characteristics.  Two of the /proc/vmstat values "nr_written" and
      "nr_dirtied" are added here.
      
      	# cat /sys/devices/system/node/node20/vmstat
      	nr_written 0
      	nr_dirtied 0
      Signed-off-by: default avatarMichael Rubin <mrubin@google.com>
      Reviewed-by: default avatarWu Fengguang <fengguang.wu@intel.com>
      Cc: Dave Chinner <david@fromorbit.com>
      Cc: Jens Axboe <axboe@kernel.dk>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Nick Piggin <nickpiggin@yahoo.com.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      2ac39037
    • Michael Rubin's avatar
      writeback: add nr_dirtied and nr_written to /proc/vmstat · ea941f0e
      Michael Rubin authored
      To help developers and applications gain visibility into writeback
      behaviour adding two entries to vm_stat_items and /proc/vmstat.  This will
      allow us to track the "written" and "dirtied" counts.
      
         # grep nr_dirtied /proc/vmstat
         nr_dirtied 3747
         # grep nr_written /proc/vmstat
         nr_written 3618
      Signed-off-by: default avatarMichael Rubin <mrubin@google.com>
      Reviewed-by: default avatarWu Fengguang <fengguang.wu@intel.com>
      Cc: Dave Chinner <david@fromorbit.com>
      Cc: Jens Axboe <axboe@kernel.dk>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Nick Piggin <nickpiggin@yahoo.com.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ea941f0e
    • Michael Rubin's avatar
      mm: add account_page_writeback() · f629d1c9
      Michael Rubin authored
      To help developers and applications gain visibility into writeback
      behaviour this patch adds two counters to /proc/vmstat.
      
        # grep nr_dirtied /proc/vmstat
        nr_dirtied 3747
        # grep nr_written /proc/vmstat
        nr_written 3618
      
      These entries allow user apps to understand writeback behaviour over time
      and learn how it is impacting their performance.  Currently there is no
      way to inspect dirty and writeback speed over time.  It's not possible for
      nr_dirty/nr_writeback.
      
      These entries are necessary to give visibility into writeback behaviour.
      We have /proc/diskstats which lets us understand the io in the block
      layer.  We have blktrace for more in depth understanding.  We have
      e2fsprogs and debugsfs to give insight into the file systems behaviour,
      but we don't offer our users the ability understand what writeback is
      doing.  There is no way to know how active it is over the whole system, if
      it's falling behind or to quantify it's efforts.  With these values
      exported users can easily see how much data applications are sending
      through writeback and also at what rates writeback is processing this
      data.  Comparing the rates of change between the two allow developers to
      see when writeback is not able to keep up with incoming traffic and the
      rate of dirty memory being sent to the IO back end.  This allows folks to
      understand their io workloads and track kernel issues.  Non kernel
      engineers at Google often use these counters to solve puzzling performance
      problems.
      
      Patch #4 adds a pernode vmstat file with nr_dirtied and nr_written
      
      Patch #5 add writeback thresholds to /proc/vmstat
      
      Currently these values are in debugfs. But they should be promoted to
      /proc since they are useful for developers who are writing databases
      and file servers and are not debugging the kernel.
      
      The output is as below:
      
       # grep threshold /proc/vmstat
       nr_pages_dirty_threshold 409111
       nr_pages_dirty_background_threshold 818223
      
      This patch:
      
      This allows code outside of the mm core to safely manipulate page
      writeback state and not worry about the other accounting.  Not using these
      routines means that some code will lose track of the accounting and we get
      bugs.
      
      Modify nilfs2 to use interface.
      Signed-off-by: default avatarMichael Rubin <mrubin@google.com>
      Reviewed-by: default avatarKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Reviewed-by: default avatarWu Fengguang <fengguang.wu@intel.com>
      Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
      Cc: Jiro SEKIBA <jir@unicus.jp>
      Cc: Dave Chinner <david@fromorbit.com>
      Cc: Jens Axboe <axboe@kernel.dk>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Nick Piggin <nickpiggin@yahoo.com.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f629d1c9
    • Vasiliy Kulikov's avatar
      mm/mempolicy.c: check return code of check_range · 0def08e3
      Vasiliy Kulikov authored
      Function check_range may return ERR_PTR(...). Check for it.
      Signed-off-by: default avatarVasiliy Kulikov <segooon@gmail.com>
      Acked-by: default avatarDavid Rientjes <rientjes@google.com>
      Reviewed-by: default avatarChristoph Lameter <cl@linux.com>
      Reviewed-by: default avatarKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      0def08e3
    • Minchan Kim's avatar
      vmscan: prevent background aging of anon page in no swap system · 74e3f3c3
      Minchan Kim authored
      Ying Han reported that backing aging of anon pages in no swap system
      causes unnecessary TLB flush.
      
      When I sent a patch(69c85481), I wanted this patch but Rik pointed out
      and allowed aging of anon pages to give a chance to promote from inactive
      to active LRU.
      
      It has a two problem.
      
      1) non-swap system
      
      Never make sense to age anon pages.
      
      2) swap configured but still doesn't swapon
      
      It doesn't make sense to age anon pages until swap-on time.  But it's
      arguable.  If we have aged anon pages by swapon, VM have moved anon pages
      from active to inactive.  And in the time swapon by admin, the VM can't
      reclaim hot pages so we can protect hot pages swapout.
      
      But let's think about it.  When does swap-on happen?  It depends on admin.
       we can't expect it.  Nonetheless, we have done aging of anon pages to
      protect hot pages swapout.  It means we lost run time overhead when below
      high watermark but gain hot page swap-[in/out] overhead when VM decide
      swapout.  Is it true?  Let's think more detail.  We don't promote anon
      pages in case of non-swap system.  So even though VM does aging of anon
      pages, the pages would be in inactive LRU for a long time.  It means many
      of pages in there would mark access bit again.  So access bit hot/code
      separation would be pointless.
      
      This patch prevents unnecessary anon pages demotion in not-yet-swapon and
      non-configured swap system.  Even, in non-configuared swap system
      inactive_anon_is_low can be compiled out.
      
      It could make side effect that hot anon pages could swap out when admin
      does swap on.  But I think sooner or later it would be steady state.  So
      it's not a big problem.
      
      We could lose someting but gain more thing(TLB flush and unnecessary
      function call to demote anon pages).
      Signed-off-by: default avatarYing Han <yinghan@google.com>
      Signed-off-by: default avatarMinchan Kim <minchan.kim@gmail.com>
      Reviewed-by: default avatarRik van Riel <riel@redhat.com>
      Reviewed-by: default avatarKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      74e3f3c3
    • KAMEZAWA Hiroyuki's avatar
      memory hotplug: unify is_removable and offline detection code · 49ac8255
      KAMEZAWA Hiroyuki authored
      Now, sysfs interface of memory hotplug shows whether the section is
      removable or not.  But it checks only migrateype of pages and doesn't
      check details of cluster of pages.
      
      Next, memory hotplug's set_migratetype_isolate() has the same kind of
      check, too.
      
      This patch adds the function __count_unmovable_pages() and makes above 2
      checks to use the same logic.  Then, is_removable and hotremove code uses
      the same logic.  No changes in the hotremove logic itself.
      
      TODO: need to find a way to check RECLAMABLE. But, considering bit,
            calling shrink_slab() against a range before starting memory hotremove
            sounds better. If so, this patch's logic doesn't need to be changed.
      
      [akpm@linux-foundation.org: coding-style fixes]
      Signed-off-by: default avatarKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Reported-by: default avatarMichal Hocko <mhocko@suse.cz>
      Cc: Wu Fengguang <fengguang.wu@intel.com>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      49ac8255
    • KAMEZAWA Hiroyuki's avatar
      memory hotplug: fix notifier's return value check · 4b20477f
      KAMEZAWA Hiroyuki authored
      Even if notifier cannot find any pages, it doesn't mean no pages are
      available...And, if there are no notifiers registered, this condition will
      be always true and memory hotplug will show -EBUSY.
      
      This is a bug but not critical.
      
      In most case, a pageblock which will be offlined is MIGRATE_MOVABLE This
      "notifier" is called only when the pageblock is _not_ MIGRATE_MOVABLE.
      But if not MIGRATE_MOVABLE, it's common case that memory hotplug will
      fail.  So, no one notice this bug.
      Signed-off-by: default avatarKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: Michal Hocko <mhocko@suse.cz>
      Cc: Wu Fengguang <fengguang.wu@intel.com>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      4b20477f
    • Minchan Kim's avatar
      mm: compaction: fix COMPACTPAGEFAILED counting · cf608ac1
      Minchan Kim authored
      Presently update_nr_listpages() doesn't have a role.  That's because lists
      passed is always empty just after calling migrate_pages.  The
      migrate_pages cleans up page list which have failed to migrate before
      returning by aaa994b3.
      
       [PATCH] page migration: handle freeing of pages in migrate_pages()
      
       Do not leave pages on the lists passed to migrate_pages().  Seems that we will
       not need any postprocessing of pages.  This will simplify the handling of
       pages by the callers of migrate_pages().
      
      At that time, we thought we don't need any postprocessing of pages.  But
      the situation is changed.  The compaction need to know the number of
      failed to migrate for COMPACTPAGEFAILED stat
      
      This patch makes new rule for caller of migrate_pages to call
      putback_lru_pages.  So caller need to clean up the lists so it has a
      chance to postprocess the pages.  [suggested by Christoph Lameter]
      Signed-off-by: default avatarMinchan Kim <minchan.kim@gmail.com>
      Cc: Hugh Dickins <hughd@google.com>
      Cc: Andi Kleen <andi@firstfloor.org>
      Reviewed-by: default avatarMel Gorman <mel@csn.ul.ie>
      Reviewed-by: default avatarWu Fengguang <fengguang.wu@intel.com>
      Acked-by: default avatarChristoph Lameter <cl@linux.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      cf608ac1
    • Thadeu Lima de Souza Cascardo's avatar
      mm: only build per-node scan_unevictable functions when NUMA is enabled · e4455abb
      Thadeu Lima de Souza Cascardo authored
      Non-NUMA systems do never create these files anyway, since they are only
      created by driver subsystem when NUMA is configured.
      
      [akpm@linux-foundation.org: cleanup]
      Signed-off-by: default avatarThadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
      Reviewed-by: default avatarKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e4455abb
    • zeal's avatar
      include/linux/pageblock-flags.h: fix set_pageblock_flags() macro definiton · f19e77a3
      zeal authored
      The presently-unused macro was missing one parameter.
      Signed-off-by: default avatarzeal <zealcook@gmail.com>
      Acked-by: default avatarMel Gorman <mel@csn.ul.ie>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f19e77a3
    • Wu Fengguang's avatar
      writeback: remove nonblocking/encountered_congestion references · 1b430bee
      Wu Fengguang authored
      This removes more dead code that was somehow missed by commit 0d99519e
      (writeback: remove unused nonblocking and congestion checks).  There are
      no behavior change except for the removal of two entries from one of the
      ext4 tracing interface.
      
      The nonblocking checks in ->writepages are no longer used because the
      flusher now prefer to block on get_request_wait() than to skip inodes on
      IO congestion.  The latter will lead to more seeky IO.
      
      The nonblocking checks in ->writepage are no longer used because it's
      redundant with the WB_SYNC_NONE check.
      
      We no long set ->nonblocking in VM page out and page migration, because
      a) it's effectively redundant with WB_SYNC_NONE in current code
      b) it's old semantic of "Don't get stuck on request queues" is mis-behavior:
         that would skip some dirty inodes on congestion and page out others, which
         is unfair in terms of LRU age.
      
      Inspired by Christoph Hellwig. Thanks!
      Signed-off-by: default avatarWu Fengguang <fengguang.wu@intel.com>
      Cc: Theodore Ts'o <tytso@mit.edu>
      Cc: David Howells <dhowells@redhat.com>
      Cc: Sage Weil <sage@newdream.net>
      Cc: Steve French <sfrench@samba.org>
      Cc: Chris Mason <chris.mason@oracle.com>
      Cc: Jens Axboe <axboe@kernel.dk>
      Cc: Christoph Hellwig <hch@infradead.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1b430bee
    • David Rientjes's avatar
      oom: fix locking for oom_adj and oom_score_adj · d19d5476
      David Rientjes authored
      The locking order in oom_adjust_write() and oom_score_adj_write() for
      task->alloc_lock and task->sighand->siglock is reversed, and lockdep
      notices that irqs could encounter an ABBA scenario.
      
      This fixes the locking order so that we always take task_lock(task) prior
      to lock_task_sighand(task).
      Signed-off-by: default avatarDavid Rientjes <rientjes@google.com>
      Reported-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Ying Han <yinghan@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d19d5476
    • David Rientjes's avatar
      oom: rewrite error handling for oom_adj and oom_score_adj tunables · 723548bf
      David Rientjes authored
      It's better to use proper error handling in oom_adjust_write() and
      oom_score_adj_write() instead of duplicating the locking order on various
      exit paths.
      Suggested-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarDavid Rientjes <rientjes@google.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Ying Han <yinghan@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      723548bf
    • David Rientjes's avatar
      oom: kill all threads sharing oom killed task's mm · 1e99bad0
      David Rientjes authored
      It's necessary to kill all threads that share an oom killed task's mm if
      the goal is to lead to future memory freeing.
      
      This patch reintroduces the code removed in 8c5cd6f3 (oom: oom_kill
      doesn't kill vfork parent (or child)) since it is obsoleted.
      
      It's now guaranteed that any task passed to oom_kill_task() does not share
      an mm with any thread that is unkillable.  Thus, we're safe to issue a
      SIGKILL to any thread sharing the same mm.
      
      This is especially necessary to solve an mm->mmap_sem livelock issue
      whereas an oom killed thread must acquire the lock in the exit path while
      another thread is holding it in the page allocator while trying to
      allocate memory itself (and will preempt the oom killer since a task was
      already killed).  Since tasks with pending fatal signals are now granted
      access to memory reserves, the thread holding the lock may quickly
      allocate and release the lock so that the oom killed task may exit.
      
      This mainly is for threads that are cloned with CLONE_VM but not
      CLONE_THREAD, so they are in a different thread group.  Non-NPTL threads
      exist in the wild and this change is necessary to prevent the livelock in
      such cases.  We care more about preventing the livelock than incurring the
      additional tasklist in the oom killer when a task has been killed.
      Systems that are sufficiently large to not want the tasklist scan in the
      oom killer in the first place already have the option of enabling
      /proc/sys/vm/oom_kill_allocating_task, which was designed specifically for
      that purpose.
      
      This code had existed in the oom killer for over eight years dating back
      to the 2.4 kernel.
      
      [akpm@linux-foundation.org: add nice comment]
      Signed-off-by: default avatarDavid Rientjes <rientjes@google.com>
      Acked-by: default avatarKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Ying Han <yinghan@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1e99bad0
    • David Rientjes's avatar
      oom: avoid killing a task if a thread sharing its mm cannot be killed · e18641e1
      David Rientjes authored
      The oom killer's goal is to kill a memory-hogging task so that it may
      exit, free its memory, and allow the current context to allocate the
      memory that triggered it in the first place.  Thus, killing a task is
      pointless if other threads sharing its mm cannot be killed because of its
      /proc/pid/oom_adj or /proc/pid/oom_score_adj value.
      
      This patch checks whether any other thread sharing p->mm has an
      oom_score_adj of OOM_SCORE_ADJ_MIN.  If so, the thread cannot be killed
      and oom_badness(p) returns 0, meaning it's unkillable.
      Signed-off-by: default avatarDavid Rientjes <rientjes@google.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Ying Han <yinghan@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e18641e1
    • Ying Han's avatar
      oom: add per-mm oom disable count · 3d5992d2
      Ying Han authored
      It's pointless to kill a task if another thread sharing its mm cannot be
      killed to allow future memory freeing.  A subsequent patch will prevent
      kills in such cases, but first it's necessary to have a way to flag a task
      that shares memory with an OOM_DISABLE task that doesn't incur an
      additional tasklist scan, which would make select_bad_process() an O(n^2)
      function.
      
      This patch adds an atomic counter to struct mm_struct that follows how
      many threads attached to it have an oom_score_adj of OOM_SCORE_ADJ_MIN.
      They cannot be killed by the kernel, so their memory cannot be freed in
      oom conditions.
      
      This only requires task_lock() on the task that we're operating on, it
      does not require mm->mmap_sem since task_lock() pins the mm and the
      operation is atomic.
      
      [rientjes@google.com: changelog and sys_unshare() code]
      [rientjes@google.com: protect oom_disable_count with task_lock in fork]
      [rientjes@google.com: use old_mm for oom_disable_count in exec]
      Signed-off-by: default avatarYing Han <yinghan@google.com>
      Signed-off-by: default avatarDavid Rientjes <rientjes@google.com>
      Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
      Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
      Cc: Rik van Riel <riel@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3d5992d2
    • Matt Mackall's avatar
      Documentation/filesystems/proc.txt: improve smaps field documentation · 0f4d208f
      Matt Mackall authored
      Signed-off-by: default avatarMatt Mackall <mpm@selenic.com>
      Cc: Nikanth Karthikesan <knikanth@suse.de>
      Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
      Cc: Wu Fengguang <fengguang.wu@intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      0f4d208f
    • WANG Cong's avatar
      vmcore: it is not experimental any more · a4f7326d
      WANG Cong authored
      We use vmcore in our production kernel for a long time, it is pretty
      stable now.  So I don't think we need to mark it as experimental any more.
      Signed-off-by: default avatarWANG Cong <xiyou.wangcong@gmail.com>
      Acked-by: default avatarNeil Horman <nhorman@tuxdriver.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a4f7326d
    • Richard Weinberger's avatar
      um: fix IRQ flag handling naming · dbec9213
      Richard Weinberger authored
      Commit df9ee292 ("Fix IRQ flag handling naming") changed the IRQ flag
      handling naming scheme and broke UML:
      
      In file included from arch/um/include/asm/fixmap.h:5,
                       from arch/um/include/shared/um_uaccess.h:10,
                       from arch/um/include/asm/uaccess.h:41,
                       from arch/um/include/asm/thread_info.h:13,
                       from include/linux/thread_info.h:56,
                       from include/linux/preempt.h:9,
                       from include/linux/spinlock.h:50,
                       from include/linux/seqlock.h:29,
                       from include/linux/time.h:8,
                       from include/linux/stat.h:60,
                       from include/linux/module.h:10,
                       from init/main.c:13:
      arch/um/include/asm/system.h:11:1: warning: "local_save_flags" redefined
      
      This patch brings the new scheme to UML and makes it work again.
      Signed-off-by: default avatarRichard Weinberger <richard@nod.at>
      Acked-by: default avatarDavid Howells <dhowells@redhat.com>
      Cc: Jeff Dike <jdike@addtoit.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      dbec9213