- 07 Nov, 2011 10 commits
-
-
Archit Taneja authored
The commit 383e4f69 makes reqbuf prevent requesting a larger size buffer than what is allocated at kernel boot during omap_vout_probe. In omap_vout_buffer_setup callback API, the requested size is compared with vout->buffer_size, this isn't correct as vout->buffer_size is later set to the size requested in reqbuf. When the video device is opened the next time, this check will prevent us to allocate a buffer which is larger than what we requested the last time. Don't use vout->buffer_size, always check with the parameters video1_bufsize or video2_bufsize. Signed-off-by:
Archit Taneja <archit@ti.com> Acked-by:
Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jonathan Cameron authored
Function ensures that error codes don't get mangled. Dependant on: which is working it's way through the i2c tree. Signed-off-by:
Jonathan Cameron <jic23@cam.ac.uk> Acked-by:
Jean Delvare <khali@linux-fr.org> Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
DNOD44CDH086A (NXP TDA18212) tuner module is not connected to demodulator I2C gate. Instead demodulator gate it uses external GPIO driven gate. Override demodulator I2C gate control with own in that case. Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Hans Verkuil authored
The Makefile used := instead of +=, this broke the compatibility build. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
This header clashes with the jpeg.h in gspca when doing a compatibility build using the media_build system. Signed-off-by:
-
- 03 Nov, 2011 30 commits
-
-
Timo Kokkonen authored
If the said config optio is not set, the compiler will spill out many warnings about statements with no effect, such as: Casting the zero to void will cure the warning. Signed-off-by:
Timo Kokkonen <kaapeli@itanic.dy.fi> Signed-off-by:
-
Malcolm Priestley authored
Support for single ITE 9135 device. Only single devices have been tested. Dual ITE 9135 devices should work, but have not been tested. TODOs support for ver 2 chip config for other tuner types. rework of firmware file. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Teka authored
Hi, This is a little patch to support Terratec G1 (based on Terratec Grabby). It works perfectly on my pc (Ubuntu 11.04 / Kernel 2.6.38). Best regards, Signed-off-by: -
Dan Carpenter authored
If "i" is 2 then when we call cx25821_video_mux() we'd end up going past the end of the cx25821_boards[dev->board]->input[]. The INPUT() macro obfuscates what's going on in that function so it's a bit hard to follow. And as Mauro points out the hard coded 2 is not very helpful. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Paul Bolle authored
The Kconfig symbol RADIO_TEA5764_XTAL is unused. The code does use a RADIO_TEA5764_XTAL macro, but does that rather peculiar. But there seems to be a way to keep both. (The easiest way out would be to rip out both the Kconfig symbol and the macro.) Note there's also a module parameter 'use_xtal' to influence all this. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Acked-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
The crop rectangle takes the preview engine internal cropping requirements into account. The smallest allowable margins are 14 columns and 8 rows when reading from memory, and 18 columns and 8 rows when processing data on the fly from the CCDC. Signed-off-by:
-
Laurent Pinchart authored
The macros that define the minimum/maximum input and output sizes are defined in seperate files and have no consistent naming. In preparation for preview engine cropping support, move them all to isppreview.c and rename them to PREV_{MIN|MAX}_{IN|OUT}_{WIDTH|HEIGHT}*. Remove unused and/or unneeded local variables that store the maximum output width. Signed-off-by: -
Laurent Pinchart authored
The horizontal averager isn't used and will get in the way when implementing cropping support on the input pad. Remove it, it can be added back later if needed. Signed-off-by:
-
Laurent Pinchart authored
Set the media_device::hw_revision field to the ISP revision number. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Guennadi Liakhovetski authored
Trivial arithmetics clean up. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
-
Laurent Pinchart authored
Make sure all modules init functions clean up after themselves in case of error. Signed-off-by:
-
Laurent Pinchart authored
Mutexes must be destroyed with mutex_destroy(). Add missing calls in the modules cleanup handlers. Signed-off-by:
-
Laurent Pinchart authored
Group all init/cleanup functions together to make the code more readable. Signed-off-by:
-
Laurent Pinchart authored
The media_entity_cleanup() function belong to the module cleanup handlers, not the entity registration handlers. Move it there. Create a omap3isp_video_cleanup() function to cleanup the video node entity, and call it from the module cleanup handlers. Rename omap3isp_stat_free() to omap3isp_stat_cleanup(). Signed-off-by:
-
Sachin Kamat authored
This patch renames the MFC firmware binary to avoid SoC name in it. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Scott Jiang authored
no mmu system needs get_unmapped_area file operations to do mmap Signed-off-by:
Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
This driver exposes preview mode operation of the S5K6AAFX sensor with embedded SoC ISP. The native capture (snapshot) operation mode is not supported. Following controls are available: manual/auto exposure and gain, power line frequency (anti-flicker), saturation, sharpness, brightness, contrast, white balance temperature, color effects, horizontal/vertical image flip, frame interval, auto white balance. RGB component gains are currently exposed through private controls. Reviewed-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
V4L2_CID_POWER_LINE_FREQUENCY control allows applications to instruct a driver what is the power line frequency so an appropriate filter can be used by the device to cancel flicker by compensating the light intensity ripple. Currently in the menu we have entries for 50 Hz and 60 Hz and for entirely disabling the anti-flicker filter. However some devices are capable of automatically detecting the frequency, so add V4L2_CID_POWER_LINE_FREQUENCY_AUTO entry for them. Signed-off-by:
-
Janusz Krzysztofik authored
* with no "retrun ret;" at the end, there is no need to initialize ret any longer, * consequently use conditional expressions, not if...else constructs, throughout ov6650_s_ctrl(), * v4l2_ctrl_new_std_menu() max value of V4L2_EXPOSURE_MANUAL instead of equivalent 1 looks more clear. Created on top of "Converting soc_camera to the control framework" series. Signed-off-by:
Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by:
-
Bastian Hecht authored
This patch adds the ability to get arbitrary resolutions with a width up to 2592 and a height up to 720 pixels instead of the standard 1280x720 only. Signed-off-by:
Bastian Hecht <hechtb@gmail.com> Acked-by:
-
Guennadi Liakhovetski authored
Most users of the <media/soc_mediabus.h> header only need pixel code definitions, which are now located in the generic <linux/v4l2-mediabus.h> header. Switch over to reduce soc-camera dependencies. Signed-off-by:
-
Guennadi Liakhovetski authored
The most important change in this patch is direct linking to struct soc_camera_link via the client->dev.platform_data pointer. This makes most of the soc-camera client drivers also usable outside of the soc-camera framework. After this change all what is needed for these drivers to function are inclusions of soc-camera headers for some convenience macros, suitably configured platform data, which is anyway always required, and loaded soc-camera core module for library functions. If desired, these library functions can be made generic in the future and moved to a more neutral location. The only two client drivers, that still depend on soc-camera are: mt9t031: it uses struct video_device for its PM. Since no hardware is available, alternative methods cannot be tested. ov6650: it uses struct soc_camera_device to pass its sense data back to the bridge driver. A generic v4l2-subdevice approach should be developed to perform this. Signed-off-by:
-
Guennadi Liakhovetski authored
VIDIOC_G_STD can return the current TV-norm to the user in one of two ways: if an .vidioc_g_std() ioctl operation is provided by the driver, it is called, otherwise the value ot the .current_norm field of struct video_device is returned. Since subdevice drivers currently have no access to struct video_device objects, the only way to provide this information to the user is by implementing a .g_std() method. Signed-off-by:
-
Guennadi Liakhovetski authored
Currently only very few drivers actually use video_device nodes, embedded in struct v4l2_subdev. Allocate these nodes dynamically for those drivers to save memory for the rest. Signed-off-by:
-
Guennadi Liakhovetski authored
If the sh_mobile_csi2 driver didn't attach to a client, normally, because the respective device connects to the SoC over the parallel CEU interface and doesn't use the CSI-2 controller, it also shouldn't call pm_runtime_put() on attempted disconnect. Signed-off-by:
-
Guennadi Liakhovetski authored
Using the internally cached pixel code, instead of the one, provided by the soc-camera, removes one more use of struct soc_camera_device in these drivers. Also remove the no longer needed soc_camera_from_i2c() inline function. Signed-off-by:
-
Guennadi Liakhovetski authored
Remove most trivial uses of struct soc_camera_device from most client drivers, abstracting some of them inside inline functions. Next steps will eliminate remaining uses and modify inline functions to not use struct soc_camera_device. Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
