- 08 May, 2007 40 commits
-
-
Matthias Kaehlcke authored
The TPM driver uses two semaphores as mutexes. Use the mutex API instead of the (binary) semaphores. Signed-off-by:
Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Cc: Kylene Hall <kjhall@us.ibm.com> Cc: Marcel Selhorst <tpm@selhorst.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Matthias Kaehlcke authored
The RocketPort driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by:
-
Stas Sergeev authored
Other symbols of the hrtimers API are already exported. Signed-off-by:
Stas Sergeev <stsp@aknet.ru> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Alexey Kuznetsov authored
When elf loader fails to map executable (due to memory shortage or because binary is malformed), it can return 0. Normally, this is invisible because process is killed with SIGKILL and it never returns to user space. But if exec() is called from kernel thread (hotplug, whatever) consequences are more interesting and vary depending on architecture. i386. Nothing especially interesting, execve() just returns with "success" :-) x86_64. Fake zero frame is used on way to caller, RSP/RIP are loaded with zeros, ergo... double fault. ia64. Similar to i386, but r32...r95 are corrupted. Sometimes it oopses due to return to zero PC, sometimes it sees NaT in rXX and oopses due to NaT consumption. Signed-off-by:Alexey Kuznetsov <alexey@openvz.org> Signed-off-by:
Kirill Korotaev <dev@openvz.org> Signed-off-by:
Pavel Emelianov <xemul@openvz.org> Signed-off-by:
-
Sergei Shtylyov authored
Fix misnamed fields of 'struct clock_event_device' in the kernel-doc comment. Convert the acronyms to uppercase, while at it... Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by:
-
Randy Dunlap authored
librs docbook typo fixes. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Acked-by:
Jan Kara <jack@ucw.cz> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
David Woodhouse authored
Add taskstats.h to include/linux/Kbuild, make headers_install would then pickup taskstats.h. This needs to be done as taskstats.h is a user interface header. Signed-off-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Cc: Don Zickus <dzickus@redhat.com> Signed-off-by:
-
Paul Fulghum authored
Change synclink_gt driver to use dynamic tty device registration. Signed-off-by:
Paul Fulghum <paulkf@microgate.com> Signed-off-by:
-
Jiri Slaby authored
Add sensable phantom driver Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
David Rientjes authored
You currently cannot remove all cpus or mems from cpus_allowed or mems_allowed of a cpuset. We now allow both if there are no attached tasks. Acked-by:
Paul Jackson <pj@sgi.com> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by:
Paul Menage <menage@google.com> Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Akinobu Mita authored
Cleanup using simple_read_from_buffer() in procfs. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Simon Horman authored
There is a new list for kexec/kdump discussion. Signed-off-by:
Simon Horman <horms@verge.net.au> Acked-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
dann frazier authored
I noticed that the moxa input checking security bug described by CVE-2005-0504 appears to remain unfixed upstream. The issue is described here: http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2005-0504 Debian has been shipping the following patch from Andres Salomon. (akpm: it's a privileged operation) Signed-off-by:
dann frazier <dannf@hp.com> Signed-off-by:
Andres Salomon <dilinger@debian.org> Signed-off-by:
-
Andreas Schwab authored
Don't clobber error from sys_ioctl in HDIO_GETGEO compat wrapper. Signed-off-by:
Andreas Schwab <schwab@suse.de> Signed-off-by:
-
Zach Carter authored
Signed-off-by:
Zach Carter <linux@zachcarter.com> Cc: Bart Samwel <bart@samwel.tk> Signed-off-by:
-
Michal Piotrowski authored
Remove duplicate 'U' entry -- fix mis-merge. Signed-off-by:
Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by:
-
Stephen Mollett authored
It appears that a minor thinko occurred in udf_rmdir and the (already-cleared) link count on the directory that is being removed was being decremented instead of the link count on its parent directory. This gives rise to lots of kernel messages similar to: UDF-fs warning (device loop1): udf_rmdir: empty directory has nlink != 2 (8) when removing directory trees. No other ill effects have been observed but I guess it could theoretically result in the link count overflowing on a very long-lived, much modified directory. Signed-off-by:
Stephen Mollett <molletts@yahoo.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Jan Kara <jack@ucw.cz> Cc: <stable@kernel.org> Signed-off-by:
-
OGAWA Hirofumi authored
If you compile and run the below test case in an msdos or vfat directory on an x86-64 system with -m32 you'll get garbage in the kernel_dirent struct followed by a SIGSEGV. The patch fixes this. Reported and initial fix by Bart Oldeman #include <sys/types.h> #include <sys/ioctl.h> #include <dirent.h> #include <stdio.h> #include <unistd.h> #include <fcntl.h> struct kernel_dirent { long d_ino; long d_off; unsigned short d_reclen; char d_name[256]; /* We must not include limits.h! */ }; #define VFAT_IOCTL_READDIR_BOTH _IOR('r', 1, struct kernel_dirent [2]) #define VFAT_IOCTL_READDIR_SHORT _IOR('r', 2, struct kernel_dirent [2]) int main(void) { int fd = open(".", O_RDONLY); struct kernel_dirent de[2]; while (1) { int i = ioctl(fd, VFAT_IOCTL_READDIR_BOTH, (long)de); if (i == -1) break; if (de[0].d_reclen == 0) break; printf("SFN: reclen=%2d off=%d ino=%d, %-12s", de[0].d_reclen, de[0].d_off, de[0].d_ino, de[0].d_name); if (de[1].d_reclen) printf("\tLFN: reclen=%2d off=%d ino=%d, %s", de[1].d_reclen, de[1].d_off, de[1].d_ino, de[1].d_name); printf("\n"); } return 0; } Signed-off-by:Bart Oldeman <bartoldeman@users.sourceforge.net> Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: <stable@kernel.org> Signed-off-by:
-
Guennadi Liakhovetski authored
dma_declare_coherent_memory() allocates a bitmap 1 bit per page, it calculates the bitmap size based on size of long, but allocates bytes... Thanks to James Bottomley for clarifications and corrections. Signed-off-by:
G. Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
James Bottomley <James.Bottomley@SteelEye.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
akpm@linux-foundation.org authored
Cc: Matt Reimer <mreimer@vpop.net> [akpm@linux-foundation.org: kconfig update] Signed-off-by:
Matt Reimer <mreimer@vpop.net> Signed-off-by:
Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by:
-
Evgeniy Polyakov authored
Signed-off-by:
-
Evgeniy Polyakov authored
Signed-off-by:
-
Alistair John Strachan authored
Several people have observed that perhaps LOG_BUF_SHIFT should be in a more obvious place than under DEBUG_KERNEL. Under some circumstances (such as the PARISC architecture), DEBUG_KERNEL can increase kernel size, which is an undesirable trade off for something as trivial as increasing the kernel log buffer size. Instead, move LOG_BUF_SHIFT into "General Setup", so that people are more likely to be able to change it such a circumstance that the default buffer size is insufficient. Signed-off-by:
Alistair John Strachan <s0348365@sms.ed.ac.uk> Acked-by:
-
Randy Dunlap authored
Eliminate 19439 (!!) sparse warnings like: include/linux/mm.h:321:22: warning: constant 0xffff810000000000 is so big it is unsigned long Eliminate 56 sparse warnings like: arch/x86_64/kernel/setup.c:248:16: warning: constant 0xffffffff80000000 is so big it is unsigned long Eliminate 5 sparse warnings like: arch/x86_64/kernel/module.c:49:13: warning: constant 0xfffffffffff00000 is so big it is unsigned long Eliminate 23 sparse warnings like: arch/x86_64/mm/init.c:551:37: warning: constant 0xffffc20000000000 is so big it is unsigned long Eliminate 6 sparse warnings like: arch/x86_64/kernel/module.c:49:13: warning: constant 0xffffffff88000000 is so big it is unsigned long Eliminate 23 sparse warnings like: arch/x86_64/mm/init.c:552:6: warning: constant 0xffffe1ffffffffff is so big it is unsigned long Eliminate 3 sparse warnings like: arch/x86_64/kernel/e820.c:186:17: warning: constant 0x3fffffffffff is so big it is long Signed-off-by:
-
Randy Dunlap authored
Make a global linux/const.h header file instead of having multiple, per-arch files, and convert current users of asm/const.h to use linux/const.h. Built on x86_64 and sparc64. [akpm@linux-foundation.org: fix include/asm-x86_64/Kbuild] Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Parag Warudkar authored
flush_scheduled_work() can sleep, and we're calling it under spinlock. AFAICS, moving flush_scheduled_work before spin_lock() should not cause any problems. Reason being - The only thing that can race against tpm_release is tpm_open (tpm_release is called when last reference to the file is closed and only thing that can happen after that is tpm_open??) and tpm_open acquires driver_lock and more over it bails out with EBUSY if chip->num_opens is greater than 0. I also moved chip->num_pending-- to after deleting timer and setting data pending as it looks more correct for the paranoid although it probably doesn't matter as it is guarded by driver_lock. None the less this change should not cause problems. While I was at it I noticed a missing NULL check in tpm_register_hardware which is fixed with this patch as well. Signed-off-by:
Parag Warudkar <parag.warudkar@gmail.com> Signed-off-by:
-
Jesper Juhl authored
commit 226a6b84 renumbered Chapter 11 in Documentation/CodingStyle to Chapter 12, but it didn't update the reference to that chapter further down in the file. This patch corrects the chapter reference. Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
-
Jan Kara authored
Propagate flags such as S_APPEND, S_IMMUTABLE, etc. from i_flags into ext2-specific i_flags. Hence, when someone sets these flags via a different interface than ioctl, they are stored correctly. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
OGAWA Hirofumi authored
It seems that the recent Windows changed specification, and it's undocumented. Windows doesn't update ->free_clusters correctly. This patch doesn't use ->free_clusters by default. (instead, add "usefree" for forcing to use it) Signed-off-by:
-
Jarek Poplawski authored
It looks like a remainder from designing... Signed-off-by:
Jarek Poplawski <jarkao@o2.pl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
David Gibson authored
Most architectures defined three macros, MK_IOSPACE_PFN(), GET_IOSPACE() and GET_PFN() in pgtable.h. However, the only callers of any of these macros are in Sparc specific code, either in arch/sparc, arch/sparc64 or drivers/sbus. This patch removes the redundant macros from all architectures except sparc and sparc64. Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Cc: <linux-arch@vger.kernel.org> Signed-off-by:
-
Borislav Petkov authored
This patch shuts warnings of the sort: make -C /mnt/samsung_200/sam/kernel/trees/21-rc6/build \ KBUILD_SRC=/mnt/samsung_200/sam/kernel/trees/21-rc6 \ KBUILD_EXTMOD="" -f /mnt/samsung_200/sam/kernel/trees/21-rc6/Makefile mandocs make -f /mnt/samsung_200/sam/kernel/trees/21-rc6/scripts/Makefile.build obj=scripts/basic make -f /mnt/samsung_200/sam/kernel/trees/21-rc6/scripts/Makefile.build obj=Documentation/DocBook mandocs SRCTREE=/mnt/samsung_200/sam/kernel/trees/21-rc6/ /mnt/samsung_200/sam/kernel/trees/21-rc6/build/scripts/basic/docproc doc /mnt/samsung_200/sam/kernel/trees/21-rc6/Documentation/DocBook/wanbook.tmpl >Documentation/DocBook/wanbook.xml if grep -q refentry Documentation/DocBook/wanbook.xml; then xmlto man -m /mnt/samsung_200/sam/kernel/trees/21-rc6/Documentation/DocBook/stylesheet.xsl -o Documentation/DocBook/man Documentation/DocBook/wanbook.xml ; gzip -f Documentation/DocBook/man/*.9; fi Note: meta version: No productnumber or alternative sppp_close Note: meta version: No refmiscinfo@class=version sppp_close Note: Writing sppp_close.9 Note: meta version: No productnumber or alternative sppp_open Note: meta version: No refmiscinfo@class=version sppp_open by adding a RefMiscInfo xml tag in the form of the current kernel version to the function, struct and enum definitions in files included by kernel-doc when building 'mandocs'. However, the version string appears truncated on the manpage due to some constraints in the xml DTD for the man header, I believe, for the troff output is truncated too. Signed-off-by:
Borislav Petkov <bbpetkov@yahoo.de> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by:
-
Milind Arun Choudhary authored
use __set_current_state(TASK_*) instead of current->state = TASK_*, Signed-off-by:
Milind Arun Choudhary <milindchoudhary@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Milind Arun Choudhary authored
use __set_current_state(TASK_*) instead of current->state = TASK_*, in fs/reiserfs Signed-off-by:
-
Adrian Bunk authored
As scheduled, do_setitimer() now returns -EINVAL for invalid timeval. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
-
Jean Delvare authored
Ingo Molnar's semaphore to mutex conversions left some noise on a few trylock calls. Clean it up. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Acked-by:
Ingo Molnar <mingo@elte.hu> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by:
-
Pavel Emelianov authored
If the thread failed to create the subsequent wait_event will hang forever. This is likely to happen if kernel hits max_threads limit. Will be critical for virtualization systems that limit the number of tasks and kernel memory usage within the container. (akpm: JBD should be converted fully to the kthread API: kthread_should_stop() and kthread_stop()). Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Miklos Szeredi authored
There's a missing check for CAP_SYS_ADMIN in do_change_type(). Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Egmont Koblinger authored
The UTF-8 part of the vt driver suffers from the following issues which are addressed in my patch: 1) If there's no glyph found for a particular valid UTF-8 character, we try to display U+FFFD. However if this one is not found either, here's what the current kernel does: - First, if the Unicode value is less than the number of glyphs, use the glyph directly from that position of the glyph table. While it may be a good idea in the 8-bit world, it has absolutely no sense with Unicode in mind. For example, if a Latin-2 font is loaded and an application prints U+00FB ("u with circumflex", not present in Latin-2) then as a fallback solution the glyph from the 0xFB position of the Latin-2 fontset (which is an "u with double accent" - a different character) is displayed. - Second, if this fallback fails too, a simple ASCII question mark is printed, which is visually undistinguishable from a real question mark. I changed the code to skip the first step (except if in non-UTF-8 mode), and changed the second step to print the question mark with inverse color attributes, so it is visually clear that it's not a real question mark, and resembles more to the common glyph of U+FFFD. 2) The UTF-8 decoder is buggy in many ways: - Lone continuation bytes (section 3.1 of Markus Kuhn's UTF-8 stress test) are not caught, they are displayed as some "random" (taken directly form the font table, see above) glyphs instead the replacement character. - Incomplete sequences (sections 3.2 and 3.3 of the stress test) emit no replacement character, but rather cause the subsequent valid character to be displayed more times(!). - The decoder is not safe: overlong sequences are not caught currently, they are displayed as if these were valid representations. This may even have security impacts. - The decoder does not handle D800..DFFF and FFFE..FFFF specially, it just emits these code points and lets it be looked up in the glyph table. Since these are invalid code points, I replace them by U+FFFD and hence give no chance for them to be looked up in the glyph table. (Assuming no font ships glyphs for these code points, this change is not visible to the users since the glyph shown will be the same.) With my fixes to the decoder it now behaves exactly as Markus Kuhn's stress test recommends. 3) It has no concept of double-width (CJK) characters. It's way beyond the scope of my patch to try to display them, but at least I think it's important for the cursor to jump two positions when printing such characters, since this is what applications (such as text editors) expect. Currently the cursor only jumps one position, and hence applications suffer from displaying and refreshing problems, and editing some English letters that are preceded by some CJK characters in the same line is a nightmare. With my patch an additional space is inserted after the CJK character has been printed (which usually means a replacement symbol of course). (If U+FFFD isn't availble and hence an inverse question mark is displayed in the first cell, I keep the inverted state for the space in the 2nd column so it's quite easy to see that they are tied together.) 4) There is a small built-in table of zero-width spaces that are not to be printed but silently skipped. U+200A is included there, but it's not a zero-width character, so I remove it from there. Signed-off-by:Egmont Koblinger <egmont@uhulinux.hu> Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
