The mentioned test measures the transfer run-time to verify
that the user-space program is able to use the full aggregate B/W.

Even on (virtual) link-speed-bound tests, debug kernel can slow
down the transfer enough to cause sporadic test failures.

Instead of unconditionally raising the maximum allowed run-time,
tweak when the running kernel is a debug one, and use some simple/
rough heuristic to guess such scenarios.

Note: this intentionally avoids looking for /boot/config-<version> as
the latter file is not always available in our reference CI
environments.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move macro MPTCPOPT_HMAC_LEN definition from net/mptcp/protocol.h to
include/net/mptcp.h.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bcm63xx_enetsw_driver and bcm63xx_enet_driver are only used in
bcm63xx_enet.c now, change them to static.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220707135801.1483941-1-yangyingliang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When we are operating in SGMII inband mode, it implies that there is a
PHY connected, and the ethtool advertisement for autoneg applies to
the PHY, not the SGMII link. When in 1000base-X mode, then this applies
to the 802.3z link and needs to be applied to the PCS.

Fix this.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1o9Ng2-005Qbe-3H@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A description is missing for the net.core.high_order_alloc_disable
option in admin-guide/sysctl/net.rst ; add it. The above sysctl option
was introduced by commit ce27ec60 ("net: add high_order_alloc_disable
sysctl/static key").

Thanks to Eric for running again the benchmark cited in the above
commit, showing this knob is now mostly of historical importance.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220707080245.180525-1-atenart@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When building with Clang we encounter this warning:
| net/rxrpc/rxkad.c:434:33: error: format specifies type 'unsigned short'
| but the argument has type 'u32' (aka 'unsigned int') [-Werror,-Wformat]
| _leave(" = %d [set %hx]", ret, y);

y is a u32 but the format specifier is `%hx`. Going from unsigned int to
short int results in a loss of data. This is surely not intended
behavior. If it is intended, the warning should be suppressed through
other means.

This patch should get us closer to the goal of enabling the -Wformat
flag for Clang builds.

Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20220707182052.769989-1-justinstitt@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jakub Kicinski says:

====================
tls: pad strparser, internal header, decrypt_ctx etc.

A grab bag of non-functional refactoring to make the series
which will let us decrypt into a fresh skb smaller.

Patches in this series are not strictly required to get the
decryption into a fresh skb going, they are more in the "things
which had been annoying me for a while" category.
====================

Link: https://lore.kernel.org/r/20220708010314.1451462-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

tls_wait_data() sets the return code as an output parameter
and always returns ctx->recv_pkt on success.

Return the error code directly and let the caller read the skb
from the context. Use positive return code to indicate ctx->recv_pkt
is ready.

While touching the definition of the function rename it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

include/net/tls.h is getting a little long, and is probably hard
for driver authors to navigate. Split out the internals into a
header which will live under net/tls/. While at it move some
static inlines with a single user into the source files, add
a few tls_ prefixes and fix spelling of 'proccess'.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Jump to the free() call, instead of having to remember
to free the memory in multiple places.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The max size of iv + aad + tail is 22B. That's smaller
than a single sg entry (32B). Don't bother with the
memory packing, just create a struct which holds the
max size of those members.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

AAD size is either 5 or 13. Really no point complicating
the code for the 8B of difference. This will also let us
turn the chunked up buffer into a sane struct.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

sk_skb_cb lives within skb->cb[]. skb->cb[] straddles
2 cache lines, each containing 24B of data.
The first cache line does not contain much interesting
information for users of strparser, so pad things a little.
Previously strp_msg->full_len would live in the first cache
line and strp_msg->offset in the second.

We need to reorder the 8 byte temp_reg with struct tls_msg
to prevent a 4B hole which would push the struct over 48B.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

napi_build_skb() reuses NAPI skbuff_head cache in order to save some
cycles on freeing/allocating skbuff_heads on every new Rx or completed
Tx.
Use napi_consume_skb() to feed the cache with skbuff_heads of completed
Tx, so it's never empty. The budget parameter is added to indicate NAPI
context, as a value of zero can be passed in the case of netpoll.
Signed-off-by: Sieng-Piaw Liew <liew.s.piaw@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TCP allocates 'fast clones' skbs for packets in tx queues.

Currently, __alloc_skb() initializes the companion fclone
field to SKB_FCLONE_CLONE, and leaves other fields untouched.

It makes sense to defer this init much later in skb_clone(),
because all fclone fields are copied and hot in cpu caches
at that time.

This removes one cache line miss in __alloc_skb(), cost seen
on an host with 256 cpus all competing on memory accesses.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current implementation is such that driver first resets the
existing PFC config before applying new pfc configuration.
This creates a problem like once PF or VFs requests PFC config
previous pfc config by other PFVfs is getting reset.

This patch fixes the problem by removing unnecessary resetting
of PFC config. Also configure Pause quanta value to smaller as
current value is too high.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When building with Clang we encounter the following warnings:
| net/l2tp/l2tp_debugfs.c:187:40: error: format specifies type 'unsigned
| short' but the argument has type 'u32' (aka 'unsigned int')
| [-Werror,-Wformat] seq_printf(m, "   nr %hu, ns %hu\n", session->nr,
| session->ns);
-
| net/l2tp/l2tp_debugfs.c:196:32: error: format specifies type 'unsigned
| short' but the argument has type 'int' [-Werror,-Wformat]
| session->l2specific_type, l2tp_get_l2specific_len(session));
-
| net/l2tp/l2tp_debugfs.c:219:6: error: format specifies type 'unsigned
| short' but the argument has type 'u32' (aka 'unsigned int')
| [-Werror,-Wformat] session->nr, session->ns,

Both session->nr and ->nc are of type `u32`. The currently used format
specifier is `%hu` which describes a `u16`. My proposed fix is to listen
to Clang and use the correct format specifier `%u`.

For the warning at line 196, l2tp_get_l2specific_len() returns an int
and should therefore be using the `%d` format specifier.

Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by: Justin Stitt <justinstitt@google.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Tx NAPI should use netif_napi_add_tx().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Wells Lu <wellslutw@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netif_napi_add_tx() does not require the weight argument.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Conor Dooley says:

====================
PolarFire SoC macb reset support

The Cadence MACBs on PolarFire SoC (MPFS) have reset capability and are
compatible with the zynqmp's init function. I have removed the zynqmp
specific comments from that function & renamed it to reflect what it
does, since it is no longer zynqmp only.

MPFS's MACB had previously used the generic binding, so I also added
the required specific binding.

For v2, I noticed some low hanging cleanup fruit so there are extra
patches added for that:
moving the init function out of the config structs, aligning the
alignment of the zynqmp & default config structs with the other dozen
or so structs & simplifing the error paths to use dev_err_probe().

Feel free to apply as many or as few of those as you like.
====================

Link: https://lore.kernel.org/r/20220706095129.828253-1-conor.dooley@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

init_reset_optional() is somewhat oddly placed amidst the macb_config
struct definitions. Move it to a more reasonable location alongside
the fu540 init functions.
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The error handling paths in init_reset_optional() can all be
simplified to return dev_err_probe(). Do so.
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The various macb_config structs have taken different approaches to
alignment when broken over newlines. Pick one style and make them
match.
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

To date, the Microchip PolarFire SoC (MPFS) has been using the
cdns,macb compatible, however the generic device does not have reset
support. Add a new compatible & .data for MPFS to hook into the reset
functionality added for zynqmp support (and make the zynqmp init
function generic in the process).
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Until now the PolarFire SoC (MPFS) has been using the generic
"cdns,macb" compatible but has optional reset support. Add a specific
compatible which falls back to the currently used generic binding.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When building with clang we encounter this warning:
| net/l2tp/l2tp_ppp.c:1557:6: error: format specifies type 'unsigned
| short' but the argument has type 'u32' (aka 'unsigned int')
| [-Werror,-Wformat] session->nr, session->ns,

Both session->nr and session->ns are of type u32. The format specifier
previously used is `%hu` which would truncate our unsigned integer from
32 to 16 bits. This doesn't seem like intended behavior, if it is then
perhaps we need to consider suppressing the warning with pragma clauses.

This patch should get us closer to the goal of enabling the -Wformat
flag for Clang builds.

Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by: Justin Stitt <justinstitt@google.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/20220706230833.535238-1-justinstitt@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently NIC packet receiving performance based on page pool deteriorates
occasionally. To analysis the causes of this problem page allocation stats
are collected. Here are the stats when NIC rx performance deteriorates:

bandwidth(Gbits/s)		16.8		6.91
rx_pp_alloc_fast		13794308	21141869
rx_pp_alloc_slow		108625		166481
rx_pp_alloc_slow_h		0		0
rx_pp_alloc_empty		8192		8192
rx_pp_alloc_refill		0		0
rx_pp_alloc_waive		100433		158289
rx_pp_recycle_cached		0		0
rx_pp_recycle_cache_full	0		0
rx_pp_recycle_ring		362400		420281
rx_pp_recycle_ring_full		6064893		9709724
rx_pp_recycle_released_ref	0		0

The rx_pp_alloc_waive count indicates that a large number of pages' numa
node are inconsistent with the NIC device numa node. Therefore these pages
can't be reused by the page pool. As a result, many new pages would be
allocated by __page_pool_alloc_pages_slow which is time consuming. This
causes the NIC rx performance fluctuations.

The main reason of huge numa mismatch pages in page pool is that page pool
uses alloc_pages_bulk_array to allocate original pages. This function is
not suitable for page allocation in NUMA scenario. So this patch uses
alloc_pages_bulk_array_node which has a NUMA id input parameter to ensure
the NUMA consistent between NIC device and allocated pages.

Repeated NIC rx performance tests are performed 40 times. NIC rx bandwidth
is higher and more stable compared to the datas above. Here are three test
stats, the rx_pp_alloc_waive count is zero and rx_pp_alloc_slow which
indicates pages allocated from slow patch is relatively low.

bandwidth(Gbits/s)		93		93.9		93.8
rx_pp_alloc_fast		60066264	61266386	60938254
rx_pp_alloc_slow		16512		16517		16539
rx_pp_alloc_slow_ho		0		0		0
rx_pp_alloc_empty		16512		16517		16539
rx_pp_alloc_refill		473841		481910		481585
rx_pp_alloc_waive		0		0		0
rx_pp_recycle_cached		0		0		0
rx_pp_recycle_cache_full	0		0		0
rx_pp_recycle_ring		29754145	30358243	30194023
rx_pp_recycle_ring_full		0		0		0
rx_pp_recycle_released_ref	0		0		0
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20220705113515.54342-1-huangguangbin2@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf, netfilter, can, and bluetooth.

  Current release - regressions:

   - bluetooth: fix deadlock on hci_power_on_sync

  Previous releases - regressions:

   - sched: act_police: allow 'continue' action offload

   - eth: usbnet: fix memory leak in error case

   - eth: ibmvnic: properly dispose of all skbs during a failover

  Previous releases - always broken:

   - bpf:
       - fix insufficient bounds propagation from
         adjust_scalar_min_max_vals
       - clear page contiguity bit when unmapping pool

   - netfilter: nft_set_pipapo: release elements in clone from
     abort path

   - mptcp: netlink: issue MP_PRIO signals from userspace PMs

   - can:
       - rcar_canfd: fix data transmission failed on R-Car V3U
       - gs_usb: gs_usb_open/close(): fix memory leak

  Misc:

   - add Wenjia as SMC maintainer"

* tag 'net-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
  wireguard: Kconfig: select CRYPTO_CHACHA_S390
  crypto: s390 - do not depend on CRYPTO_HW for SIMD implementations
  wireguard: selftests: use microvm on x86
  wireguard: selftests: always call kernel makefile
  wireguard: selftests: use virt machine on m68k
  wireguard: selftests: set fake real time in init
  r8169: fix accessing unset transport header
  net: rose: fix UAF bug caused by rose_t0timer_expiry
  usbnet: fix memory leak in error case
  Revert "tls: rx: move counting TlsDecryptErrors for sync"
  mptcp: update MIB_RMSUBFLOW in cmd_sf_destroy
  mptcp: fix local endpoint accounting
  selftests: mptcp: userspace PM support for MP_PRIO signals
  mptcp: netlink: issue MP_PRIO signals from userspace PMs
  mptcp: Acquire the subflow socket lock before modifying MP_PRIO flags
  mptcp: Avoid acquiring PM lock for subflow priority changes
  mptcp: fix locking in mptcp_nl_cmd_sf_destroy()
  net/mlx5e: Fix matchall police parameters validation
  net/sched: act_police: allow 'continue' action offload
  net: lan966x: hardcode the number of external ports
  ...

Pull pin control fixes from Linus Walleij:

 - Tag Intel pin control as supported in MAINTAINERS

 - Fix a NULL pointer exception in the Aspeed driver

 - Correct some NAND functions in the Sunxi A83T driver

 - Use the right offset for some Sunxi pins

 - Fix a zero base offset in the Freescale (NXP) i.MX93

 - Fix the IRQ support in the STM32 driver

* tag 'pinctrl-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: stm32: fix optional IRQ support to gpios
  pinctrl: imx: Add the zero base flag for imx93
  pinctrl: sunxi: sunxi_pconf_set: use correct offset
  pinctrl: sunxi: a83t: Fix NAND function name for some pins
  pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux()
  MAINTAINERS: Update Intel pin control to Supported

These are indeed "should not happen" situations, but it turns out recent
changes made the 'task_is_stopped_or_trace()' case trigger (fix for that
exists, is pending more testing), and the BUG_ON() makes it
unnecessarily hard to actually debug for no good reason.

It's been that way for a long time, but let's make it clear: BUG_ON() is
not good for debugging, and should never be used in situations where you
could just say "this shouldn't happen, but we can continue".

Use WARN_ON_ONCE() instead to make sure it gets logged, and then just
continue running.  Instead of making the system basically unusuable
because you crashed the machine while potentially holding some very core
locks (eg this function is commonly called while holding 'tasklist_lock'
for writing).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 6dd4142f ("Merge branch 'af_unix-per-netns-socket-hash'") and
commit 51bae889 ("af_unix: Put pathname sockets in the global hash
table.") changed a hash table layout.

  Before:
    unix_socket_table [0   - 255] : abstract & pathname sockets
                      [256 - 511] : unnamed sockets

  After:
    per-netns table   [0   - 255] : abstract & pathname sockets
                      [256 - 511] : unnamed sockets
    bsd_socket_table  [0   - 255] : pathname sockets (sk_bind_node)

Now, while looking up sockets, we traverse the global table for the
pathname sockets and the first half of each per-netns hash table for
abstract sockets, where pathname sockets are also linked.  Thus, the
more pathname sockets we have, the longer we take to look up abstract
sockets.  This characteristic has been there before the layout change,
but we can improve it now.

This patch changes the per-netns hash table's layout so that sockets not
requiring lookup reside in the first half and do not impact the lookup of
abstract sockets.

    per-netns table   [0   - 255] : pathname & unnamed sockets
                      [256 - 511] : abstract sockets
    bsd_socket_table  [0   - 255] : pathname sockets (sk_bind_node)

We have run a test that bind()s 100,000 abstract/pathname sockets for
each, bind()s an abstract socket 100,000 times and measures the time
on __unix_find_socket_byname().  The result shows that the patch makes
each lookup faster.

  Without this patch:
    $ sudo ./funclatency -p 2278 --microseconds __unix_find_socket_byname.isra.44
     usec                : count    distribution
         0 -> 1          : 0        |                                        |
         2 -> 3          : 0        |                                        |
         4 -> 7          : 0        |                                        |
         8 -> 15         : 126      |                                        |
        16 -> 31         : 1438     |*                                       |
        32 -> 63         : 4150     |***                                     |
        64 -> 127        : 9049     |*******                                 |
       128 -> 255        : 37704    |*******************************         |
       256 -> 511        : 47533    |****************************************|

  With this patch:
    $ sudo ./funclatency -p 3648 --microseconds __unix_find_socket_byname.isra.46
     usec                : count    distribution
         0 -> 1          : 109      |                                        |
         2 -> 3          : 318      |                                        |
         4 -> 7          : 725      |                                        |
         8 -> 15         : 2501     |*                                       |
        16 -> 31         : 3061     |**                                      |
        32 -> 63         : 4028     |***                                     |
        64 -> 127        : 9312     |*******                                 |
       128 -> 255        : 51372    |****************************************|
       256 -> 511        : 28574    |**********************                  |
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20220705233715.759-1-kuniyu@amazon.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Jason A. Donenfeld says:

====================
wireguard patches for 5.19-rc6

1) A few small fixups to the selftests, per usual. Of particular note is
   a fix for a test flake that occurred on especially fast systems that
   boot in less than a second.

2) An addition during this cycle of some s390 crypto interacted with the
   way wireguard selects dependencies, resulting in linker errors
   reported by the kernel test robot. So Vladis sent in a patch for
   that, which also required a small preparatory fix moving some Kconfig
   symbols around.
====================

Link: https://lore.kernel.org/r/20220707003157.526645-1-Jason@zx2c4.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Select the new implementation of CHACHA20 for S390 when available.
It is faster than the generic software implementation, but also prevents
some linker errors in certain situations.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-kernel/202207030630.6SZVkrWf-lkp@intel.com/Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Various accelerated software implementation Kconfig values for S390 were
mistakenly placed into drivers/crypto/Kconfig, even though they're
mainly just SIMD code and live in arch/s390/crypto/ like usual. This
gives them the very unusual dependency on CRYPTO_HW, which leads to
problems elsewhere.

This patch fixes the issue by moving the Kconfig values for non-hardware
drivers into the usual place in crypto/Kconfig.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This makes for faster tests, faster compile time, and allows us to ditch
ACPI finally.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

These selftests are used for much more extensive changes than just the
wireguard source files. So always call the kernel's build file, which
will do something or nothing after checking the whole tree, per usual.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This should be a bit more stable hopefully.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Not all platforms have an RTC, and rather than trying to force one into
each, it's much easier to just set a fixed time. This is necessary
because WireGuard's latest handshakes parameter is returned in wallclock
time, and if the system time isn't set, and the system is really fast,
then this returns 0, which trips the test.

Turning this on requires setting CONFIG_COMPAT_32BIT_TIME=y, as musl
doesn't support settimeofday without it.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use bitmap_empty() instead of hand-writing it.

It is less verbose and it improves the semantic.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/78713a72414b99f673c3a9ec0519bb41c080935a.1657053343.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>