- 26 Jul, 2019 40 commits
-
-
Philipp Zabel authored
[ Upstream commit b3b7d968 ] If no more frames are decoded in bitstream end mode, and a previously decoded frame has been returned, the firmware still increments the frame number. To avoid a sequence number mismatch after decoder restart, increment the sequence_offset correction parameter. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Marco Felsch authored
[ Upstream commit f3775f89 ] coda_encoder_cmd() is racy, as the last scheduled picture run worker can still be in-flight while the ENC_CMD_STOP command is issued. Depending on the exact timing the sequence numbers might already be changed, but the last buffer might not have been put on the destination queue yet. In this case the current implementation would prematurely wake the destination queue with last_buffer_dequeued=true, causing userspace to call streamoff before the last buffer is handled. Close this race window by synchronizing with the pic_run_worker before doing the sequence check. Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> [l.stach@pengutronix.de: switch to flush_work, reword commit message] Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
[ Upstream commit 56d159a4 ] Sequence number handling assumed that the BIT processor frame number starts counting at 1, but this is not true for the MPEG-2 decoder, which starts at 0. Fix the sequence counter offset detection to handle this. Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 2af22f3e ] Some Qualcomm Snapdragon based laptops built to run Microsoft Windows are clearly ACPI 5.1 based, given that that is the first ACPI revision that supports ARM, and introduced the FADT 'arm_boot_flags' field, which has a non-zero field on those systems. So in these cases, infer from the ARM boot flags that the FADT must be 5.1 or later, and treat it as 5.1. Acked-by:
Sudeep Holla <sudeep.holla@arm.com> Tested-by:
Lee Jones <lee.jones@linaro.org> Reviewed-by:
Graeme Gregory <graeme.gregory@linaro.org> Acked-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
Hanjun Guo <guohanjun@huawei.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Kuninori Morimoto authored
[ Upstream commit b545542a ] commit 34ac3c3e ("ASoC: core: lock client_mutex while removing link components") added mutex_lock() at soc_remove_link_components(). Is is called from snd_soc_unbind_card() snd_soc_unbind_card() => soc_remove_link_components() soc_cleanup_card_resources() soc_remove_dai_links() => soc_remove_link_components() And, there are 2 way to call it. (1) snd_soc_unregister_component() ** mutex_lock() snd_soc_component_del_unlocked() => snd_soc_unbind_card() ** mutex_unlock() (2) snd_soc_unregister_card() => snd_soc_unbind_card() (1) case is already using mutex_lock() when it calles snd_soc_unbind_card(), thus, we will get lockdep warning. commit 495f926c ("ASoC: core: Fix deadlock in snd_soc_instantiate_card()") tried to fixup it, but still not enough. We still have lockdep warning when we try unbind/bind. We need mutex_lock() under snd_soc_unregister_card() instead of snd_remove_link_components()/snd_soc_unbind_card(). Fixes: 34ac3c3e ("ASoC: core: lock client_mutex while removing link components") Fixes: 495f926c ("ASoC: core: Fix deadlock in snd_soc_instantiate_card()") Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Robert Jarzmik authored
[ Upstream commit 8d4e29a5 ] In the patch refactoring the fw-node, the mt9m111 was broken for all platform_data based platforms, which were the first aim of this driver. Only the devicetree platform are still functional, probably because the testing was done on these. The result is that -EINVAL is systematically return for such platforms, what this patch fixes. [Sakari Ailus: Rework this to resolve a merge conflict and use dev_fwnode] Fixes: 98480d65 ("media: mt9m111: allow to setup pixclk polarity") Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Nathan Huckleberry authored
[ Upstream commit a9314773 ] With CONFIG_PROC_FS=n the following warning is emitted: kernel/time/timer_list.c:361:36: warning: unused variable 'timer_list_sops' [-Wunused-const-variable] static const struct seq_operations timer_list_sops = { Add #ifdef guard around procfs specific code. Signed-off-by:
Nathan Huckleberry <nhuck@google.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Cc: john.stultz@linaro.org Cc: sboyd@kernel.org Cc: clang-built-linux@googlegroups.com Link: https://github.com/ClangBuiltLinux/linux/issues/534 Link: https://lkml.kernel.org/r/20190614181604.112297-1-nhuck@google.comSigned-off-by:
-
Miroslav Lichvar authored
[ Upstream commit d897a4ab ] Don't allow the TAI-UTC offset of the system clock to be set by adjtimex() to a value larger than 100000 seconds. This prevents an overflow in the conversion to int, prevents the CLOCK_TAI clock from getting too far ahead of the CLOCK_REALTIME clock, and it is still large enough to allow leap seconds to be inserted at the maximum rate currently supported by the kernel (once per day) for the next ~270 years, however unlikely it is that someone can survive a catastrophic event which slowed down the rotation of the Earth so much. Reported-by:
Weikang shi <swkhack@gmail.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by:
-
Anders Roxell authored
[ Upstream commit b2ce5617 ] When building with CONFIG_VIDEO_ADV7511 and CONFIG_DRM_I2C_ADV7511 enabled as loadable modules, we see the following warning: drivers/gpu/drm/bridge/adv7511/adv7511.ko drivers/media/i2c/adv7511.ko Rework so that the file is named adv7511-v4l2.c. Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit e08efef8 ] Since the beginning the second clock ('special', 'sclk') was optional and it is not available on some variants of Exynos SoCs (i.e. Exynos5420 with v7 of MFC hardware). However commit 1bce6fb3 ("[media] s5p-mfc: Rework clock handling") made handling of all specified clocks mandatory. This patch restores original behavior of the driver and fixes its operation on Exynos5420 SoCs. Fixes: 1bce6fb3 ("[media] s5p-mfc: Rework clock handling") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Julian Anastasov authored
[ Upstream commit cf47a0b8 ] syzkaller reports for memory leak when registering hooks [1] As we moved the nf_unregister_net_hooks() call into __ip_vs_dev_cleanup(), defer the nf_register_net_hooks() call, so that hooks are allocated and freed from same pernet_operations (ipvs_core_dev_ops). [1] BUG: memory leak unreferenced object 0xffff88810acd8a80 (size 96): comm "syz-executor073", pid 7254, jiffies 4294950560 (age 22.250s) hex dump (first 32 bytes): 02 00 00 00 00 00 00 00 50 8b bb 82 ff ff ff ff ........P....... 00 00 00 00 00 00 00 00 00 77 bb 82 ff ff ff ff .........w...... backtrace: [<0000000013db61f1>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<0000000013db61f1>] slab_post_alloc_hook mm/slab.h:439 [inline] [<0000000013db61f1>] slab_alloc_node mm/slab.c:3269 [inline] [<0000000013db61f1>] kmem_cache_alloc_node_trace+0x15b/0x2a0 mm/slab.c:3597 [<000000001a27307d>] __do_kmalloc_node mm/slab.c:3619 [inline] [<000000001a27307d>] __kmalloc_node+0x38/0x50 mm/slab.c:3627 [<0000000025054add>] kmalloc_node include/linux/slab.h:590 [inline] [<0000000025054add>] kvmalloc_node+0x4a/0xd0 mm/util.c:431 [<0000000050d1bc00>] kvmalloc include/linux/mm.h:637 [inline] [<0000000050d1bc00>] kvzalloc include/linux/mm.h:645 [inline] [<0000000050d1bc00>] allocate_hook_entries_size+0x3b/0x60 net/netfilter/core.c:61 [<00000000e8abe142>] nf_hook_entries_grow+0xae/0x270 net/netfilter/core.c:128 [<000000004b94797c>] __nf_register_net_hook+0x9a/0x170 net/netfilter/core.c:337 [<00000000d1545cbc>] nf_register_net_hook+0x34/0xc0 net/netfilter/core.c:464 [<00000000876c9b55>] nf_register_net_hooks+0x53/0xc0 net/netfilter/core.c:480 [<000000002ea868e0>] __ip_vs_init+0xe8/0x170 net/netfilter/ipvs/ip_vs_core.c:2280 [<000000002eb2d451>] ops_init+0x4c/0x140 net/core/net_namespace.c:130 [<000000000284ec48>] setup_net+0xde/0x230 net/core/net_namespace.c:316 [<00000000a70600fa>] copy_net_ns+0xf0/0x1e0 net/core/net_namespace.c:439 [<00000000ff26c15e>] create_new_namespaces+0x141/0x2a0 kernel/nsproxy.c:107 [<00000000b103dc79>] copy_namespaces+0xa1/0xe0 kernel/nsproxy.c:165 [<000000007cc008a2>] copy_process.part.0+0x11fd/0x2150 kernel/fork.c:2035 [<00000000c344af7c>] copy_process kernel/fork.c:1800 [inline] [<00000000c344af7c>] _do_fork+0x121/0x4f0 kernel/fork.c:2369 Reported-by: syzbot+722da59ccb264bc19910@syzkaller.appspotmail.com Fixes: 719c7d56 ("ipvs: Fix use-after-free in ip_vs_in") Signed-off-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 597179b0 ] kernelci.org reports failed builds on arc because of what looks like an old missed 'select' statement: net/xfrm/xfrm_algo.o: In function `xfrm_probe_algs': xfrm_algo.c:(.text+0x1e8): undefined reference to `crypto_has_ahash' I don't see this in randconfig builds on other architectures, but it's fairly clear we want to select the hash code for it, like we do for all its other users. As Herbert points out, CRYPTO_BLKCIPHER is also required even though it has not popped up in build tests. Fixes: 17bc1970 ("ipsec: Use skcipher and ahash when probing algorithms") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Julien Thierry authored
[ Upstream commit 9034f625 ] For el0_dbg and el0_error, DAIF bits get explicitly cleared before calling ct_user_exit. When context tracking is disabled, DAIF gets set (almost) immediately after. When context tracking is enabled, among the first things done is disabling IRQs. What is actually needed is: - PSR.D = 0 so the system can be debugged (should be already the case) - PSR.A = 0 so async error can be handled during context tracking Do not clear PSR.I in those two locations. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Reviewed-by:
James Morse <james.morse@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
Julien Thierry <julien.thierry@arm.com> Signed-off-by:
-
Minwoo Im authored
[ Upstream commit dad77d63 ] If the "irq_queues" are greater than num_possible_cpus(), nvme_calc_irq_sets() can have irq set_size for HCTX_TYPE_DEFAULT greater than it can be afforded. 2039 affd->set_size[HCTX_TYPE_DEFAULT] = nrirqs - nr_read_queues; It might cause a WARN() from the irq_build_affinity_masks() like [1]: 220 if (nr_present < numvecs) 221 WARN_ON(nr_present + nr_others < numvecs); This patch prevents it from the WARN() by adjusting the max_vector value from the nvme_setup_irqs(). [1] WARN messages when modprobe nvme write_queues=32 poll_queues=0: root@target:~/nvme# nproc 8 root@target:~/nvme# modprobe nvme write_queues=32 poll_queues=0 [ 17.925326] nvme nvme0: pci function 0000:00:04.0 [ 17.940601] WARNING: CPU: 3 PID: 1030 at kernel/irq/affinity.c:221 irq_create_affinity_masks+0x222/0x330 [ 17.940602] Modules linked in: nvme nvme_core [last unloaded: nvme] [ 17.940605] CPU: 3 PID: 1030 Comm: kworker/u17:4 Tainted: G W 5.1.0+ #156 [ 17.940605] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 17.940608] Workqueue: nvme-reset-wq nvme_reset_work [nvme] [ 17.940609] RIP: 0010:irq_create_affinity_masks+0x222/0x330 [ 17.940611] Code: 4c 8d 4c 24 28 4c 8d 44 24 30 e8 c9 fa ff ff 89 44 24 18 e8 c0 38 fa ff 8b 44 24 18 44 8b 54 24 1c 5a 44 01 d0 41 39 c4 76 02 <0f> 0b 48 89 df 44 01 e5 e8 f1 ce 10 00 48 8b 34 24 44 89 f0 44 01 [ 17.940611] RSP: 0018:ffffc90002277c50 EFLAGS: 00010216 [ 17.940612] RAX: 0000000000000008 RBX: ffff88807ca48860 RCX: 0000000000000000 [ 17.940612] RDX: ffff88807bc03800 RSI: 0000000000000020 RDI: 0000000000000000 [ 17.940613] RBP: 0000000000000001 R08: ffffc90002277c78 R09: ffffc90002277c70 [ 17.940613] R10: 0000000000000008 R11: 0000000000000001 R12: 0000000000000020 [ 17.940614] R13: 0000000000025d08 R14: 0000000000000001 R15: ffff88807bc03800 [ 17.940614] FS: 0000000000000000(0000) GS:ffff88807db80000(0000) knlGS:0000000000000000 [ 17.940616] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 17.940617] CR2: 00005635e583f790 CR3: 000000000240a000 CR4: 00000000000006e0 [ 17.940617] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 17.940618] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 17.940618] Call Trace: [ 17.940622] __pci_enable_msix_range+0x215/0x540 [ 17.940623] ? kernfs_put+0x117/0x160 [ 17.940625] pci_alloc_irq_vectors_affinity+0x74/0x110 [ 17.940626] nvme_reset_work+0xc30/0x1397 [nvme] [ 17.940628] ? __switch_to_asm+0x34/0x70 [ 17.940628] ? __switch_to_asm+0x40/0x70 [ 17.940629] ? __switch_to_asm+0x34/0x70 [ 17.940630] ? __switch_to_asm+0x40/0x70 [ 17.940630] ? __switch_to_asm+0x34/0x70 [ 17.940631] ? __switch_to_asm+0x40/0x70 [ 17.940632] ? nvme_irq_check+0x30/0x30 [nvme] [ 17.940633] process_one_work+0x20b/0x3e0 [ 17.940634] worker_thread+0x1f9/0x3d0 [ 17.940635] ? cancel_delayed_work+0xa0/0xa0 [ 17.940636] kthread+0x117/0x120 [ 17.940637] ? kthread_stop+0xf0/0xf0 [ 17.940638] ret_from_fork+0x3a/0x50 [ 17.940639] ---[ end trace aca8a131361cd42a ]--- [ 17.942124] nvme nvme0: 7/1/0 default/read/poll queues Signed-off-by:
Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Heiner Litz authored
[ Upstream commit 510fd8ea ] bio_add_pc_page() may merge pages when a bio is padded due to a flush. Fix iteration over the bio to free the correct pages in case of a merge. Signed-off-by:
Heiner Litz <hlitz@ucsc.edu> Reviewed-by:
Javier González <javier@javigon.com> Signed-off-by:
Matias Bjørling <mb@lightnvm.io> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Chaitanya Kulkarni authored
[ Upstream commit e71afda4 ] This patch removes the confusing assignment of the variable result at the time of declaration and sets the value in error cases next to the places where the actual error is happening. Here we also set the result value to -ENODEV when we fail at the final ctrl state transition in nvme_reset_work(). Without this assignment result will hold 0 from nvme_setup_io_queue() and on failure 0 will be passed to he nvme_remove_dead_ctrl() from final state transition. Signed-off-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
-
Minwoo Im authored
[ Upstream commit cee6c269 ] If the state change to NVME_CTRL_CONNECTING fails, the dmesg is going to be like: [ 293.689160] nvme nvme0: failed to mark controller CONNECTING [ 293.689160] nvme nvme0: Removing after probe failure status: 0 Even it prints the first line to indicate the situation, the second line is not proper because the status is 0 which means normally success of the previous operation. This patch makes it indicate the proper error value when it fails. [ 25.932367] nvme nvme0: failed to mark controller CONNECTING [ 25.932369] nvme nvme0: Removing after probe failure status: -16 This situation is able to be easily reproduced by: root@target:~# rmmod nvme && modprobe nvme && rmmod nvme Signed-off-by:
-
Anton Eidelman authored
[ Upstream commit 2181e455 ] When a shared namespace is removed, we call blk_cleanup_queue() when the device can still be accessed as the current path and this can result in submission to a dying queue. Hence, direct_make_request() called by our mpath device may fail (propagating the failure to userspace). Instead, we want to failover this I/O to a different path if one exists. Thus, before we cleanup the request queue, we make sure that the device is cleared from the current path nor it can be selected again as such. Fix this by: - clear the ns from the head->list and synchronize rcu to make sure there is no concurrent path search that restores it as the current path - clear the mpath current path in order to trigger a subsequent path search and sync srcu to wait for any ongoing request submissions - safely continue to namespace removal and blk_cleanup_queue Signed-off-by:
Anton Eidelman <anton@lightbitslabs.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 585fb3d9 ] In edac_create_csrow_object(), the reference to the object is not released when adding the device to the device hierarchy fails (device_add()). This may result in a memory leak. Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Link: https://lkml.kernel.org/r/1555554438-103953-1-git-send-email-bianpan2016@163.comSigned-off-by:
-
Greg KH authored
[ Upstream commit 7adc05d2 ] Do put_device() if device_add() fails. [ bp: do device_del() for the successfully created devices in edac_create_csrow_objects(), on the unwind path. ] Signed-off-by:
-
Tudor Ambarus authored
[ Upstream commit f9481b08 ] at91sam9g25ek showed the following error at probe: atmel_spi f0000000.spi: Using dma0chan2 (tx) and dma0chan3 (rx) for DMA transfers atmel_spi: probe of f0000000.spi failed with error -22 Commit 0a919ae4 ("spi: Don't call spi_get_gpio_descs() before device name is set") moved the calling of spi_get_gpio_descs() after ctrl->dev is set, but didn't move the !ctrl->num_chipselect check. When there are chip selects in the device tree, the spi-atmel driver lets the SPI core discover them when registering the SPI master. The ctrl->num_chipselect is thus expected to be set by spi_get_gpio_descs(). Move the !ctlr->num_chipselect after spi_get_gpio_descs() as it was before the aforementioned commit. While touching this block, get rid of the explicit comparison with 0 and update the commenting style. Fixes: 0a919ae4 ("spi: Don't call spi_get_gpio_descs() before device name is set") Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
-
Rafael J. Wysocki authored
[ Upstream commit 44758baf ] ACPI GPEs (other than the EC one) can be enabled in two situations. First, the GPEs with existing _Lxx and _Exx methods are enabled implicitly by ACPICA during system initialization. Second, the GPEs without these methods (like GPEs listed by _PRW objects for wakeup devices) need to be enabled directly by the code that is going to use them (e.g. ACPI power management or device drivers). In the former case, if the status of a given GPE is set to start with, its handler method (either _Lxx or _Exx) needs to be invoked to take care of the events (possibly) signaled before the GPE was enabled. In the latter case, however, the first caller of acpi_enable_gpe() for a given GPE should not be expected to care about any events that might be signaled through it earlier. In that case, it is better to clear the status of the GPE before enabling it, to prevent stale events from triggering unwanted actions (like spurious system resume, for example). For this reason, modify acpi_ev_add_gpe_reference() to take an additional boolean argument indicating whether or not the GPE status needs to be cleared when its reference counter changes from zero to one and make acpi_enable_gpe() pass TRUE to it through that new argument. Fixes: 18996f2d ("ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume") Reported-by:
Furquan Shaikh <furquan@google.com> Tested-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Dennis Zhou authored
[ Upstream commit a3fb01ba ] As is, iolatency recognizes done_bio and cleanup as ending paths. If a request is marked REQ_NOWAIT and fails to get a request, the bio is cleaned up via rq_qos_cleanup() and ended in bio_wouldblock_error(). This results in underflowing the inflight counter. Fix this by only accounting bios that were actually submitted. Signed-off-by:
Dennis Zhou <dennis@kernel.org> Cc: Josef Bacik <josef@toxicpanda.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 1b7aebf0 ] cpuinfo_x86.x86_model is an unsigned type, so comparing against zero will generate a compilation warning: arch/x86/kernel/cpu/cacheinfo.c: In function 'cacheinfo_amd_init_llc_id': arch/x86/kernel/cpu/cacheinfo.c:662:19: warning: comparison is always true \ due to limited range of data type [-Wtype-limits] Remove the unnecessary lower bound check. [ bp: Massage. ] Fixes: 68091ee7 ("x86/CPU/AMD: Calculate last level cache ID from number of sharing threads") Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Pu Wen <puwen@hygon.cn> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/1560954773-11967-1-git-send-email-cai@lca.pwSigned-off-by:
-
Ilias Apalodimas authored
[ Upstream commit 39e3622e ] Since we changed the Tx ring handling and now depends on bit31 to figure out the owner of the descriptor, we should initialize this every time the device goes down-up instead of doing it once on driver init. If the value is not correctly initialized the device won't have any available descriptors Changes since v1: - Typo fixes Fixes: 35e07d23 ("net: socionext: remove mmio reads on Tx") Signed-off-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Mika Westerberg authored
[ Upstream commit c2bf1fc2 ] Currently Linux does not follow PCIe spec regarding the required delays after reset. A concrete example is a Thunderbolt add-in-card that consists of a PCIe switch and two PCIe endpoints: +-1b.0-[01-6b]----00.0-[02-6b]--+-00.0-[03]----00.0 TBT controller +-01.0-[04-36]-- DS hotplug port +-02.0-[37]----00.0 xHCI controller \-04.0-[38-6b]-- DS hotplug port The root port (1b.0) and the PCIe switch downstream ports are all PCIe gen3 so they support 8GT/s link speeds. We wait for the PCIe hierarchy to enter D3cold (runtime): pcieport 0000:00:1b.0: power state changed by ACPI to D3cold When it wakes up from D3cold, according to the PCIe 4.0 section 5.8 the PCIe switch is put to reset and its power is re-applied. This means that we must follow the rules in PCIe 4.0 section 6.6.1. For the PCIe gen3 ports we are dealing with here, the following applies: With a Downstream Port that supports Link speeds greater than 5.0 GT/s, software must wait a minimum of 100 ms after Link training completes before sending a Configuration Request to the device immediately below that Port. Software can determine when Link training completes by polling the Data Link Layer Link Active bit or by setting up an associated interrupt (see Section 6.7.3.3). Translating this into the above topology we would need to do this (DLLLA stands for Data Link Layer Link Active): pcieport 0000:00:1b.0: wait for 100ms after DLLLA is set before access to 0000:01:00.0 pcieport 0000:02:00.0: wait for 100ms after DLLLA is set before access to 0000:03:00.0 pcieport 0000:02:02.0: wait for 100ms after DLLLA is set before access to 0000:37:00.0 I've instrumented the kernel with additional logging so we can see the actual delays the kernel performs: pcieport 0000:00:1b.0: power state changed by ACPI to D0 pcieport 0000:00:1b.0: waiting for D3cold delay of 100 ms pcieport 0000:00:1b.0: waking up bus pcieport 0000:00:1b.0: waiting for D3hot delay of 10 ms pcieport 0000:00:1b.0: restoring config space at offset 0x2c (was 0x60, writing 0x60) ... pcieport 0000:00:1b.0: PME# disabled pcieport 0000:01:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) ... pcieport 0000:01:00.0: PME# disabled pcieport 0000:02:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) ... pcieport 0000:02:00.0: PME# disabled pcieport 0000:02:01.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) ... pcieport 0000:02:01.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407) pcieport 0000:02:01.0: PME# disabled pcieport 0000:02:02.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) ... pcieport 0000:02:02.0: PME# disabled pcieport 0000:02:04.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) ... pcieport 0000:02:04.0: PME# disabled pcieport 0000:02:01.0: PME# enabled pcieport 0000:02:01.0: waiting for D3hot delay of 10 ms pcieport 0000:02:04.0: PME# enabled pcieport 0000:02:04.0: waiting for D3hot delay of 10 ms thunderbolt 0000:03:00.0: restoring config space at offset 0x14 (was 0x0, writing 0x8a040000) ... thunderbolt 0000:03:00.0: PME# disabled xhci_hcd 0000:37:00.0: restoring config space at offset 0x10 (was 0x0, writing 0x73f00000) ... xhci_hcd 0000:37:00.0: PME# disabled For the switch upstream port (01:00.0) we wait for 100ms but not taking into account the DLLLA requirement. We then wait 10ms for D3hot -> D0 transition of the root port and the two downstream hotplug ports. This means that we deviate from what the spec requires. Performing the same check for system sleep (s2idle) transitions we can see following when resuming from s2idle: pcieport 0000:00:1b.0: power state changed by ACPI to D0 pcieport 0000:00:1b.0: restoring config space at offset 0x2c (was 0x60, writing 0x60) ... pcieport 0000:01:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) ... pcieport 0000:02:02.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) pcieport 0000:02:02.0: restoring config space at offset 0x2c (was 0x0, writing 0x0) pcieport 0000:02:01.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) pcieport 0000:02:04.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) pcieport 0000:02:02.0: restoring config space at offset 0x28 (was 0x0, writing 0x0) pcieport 0000:02:00.0: restoring config space at offset 0x3c (was 0x1ff, writing 0x201ff) pcieport 0000:02:02.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1) pcieport 0000:02:01.0: restoring config space at offset 0x2c (was 0x0, writing 0x60) pcieport 0000:02:02.0: restoring config space at offset 0x20 (was 0x0, writing 0x73f073f0) pcieport 0000:02:04.0: restoring config space at offset 0x2c (was 0x0, writing 0x60) pcieport 0000:02:01.0: restoring config space at offset 0x28 (was 0x0, writing 0x60) pcieport 0000:02:00.0: restoring config space at offset 0x2c (was 0x0, writing 0x0) pcieport 0000:02:02.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1) pcieport 0000:02:04.0: restoring config space at offset 0x28 (was 0x0, writing 0x60) pcieport 0000:02:01.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1ff10001) pcieport 0000:02:00.0: restoring config space at offset 0x28 (was 0x0, writing 0x0) pcieport 0000:02:02.0: restoring config space at offset 0x18 (was 0x0, writing 0x373702) pcieport 0000:02:04.0: restoring config space at offset 0x24 (was 0x10001, writing 0x49f12001) pcieport 0000:02:01.0: restoring config space at offset 0x20 (was 0x0, writing 0x73e05c00) pcieport 0000:02:00.0: restoring config space at offset 0x24 (was 0x10001, writing 0x1fff1) pcieport 0000:02:04.0: restoring config space at offset 0x20 (was 0x0, writing 0x89f07400) pcieport 0000:02:01.0: restoring config space at offset 0x1c (was 0x101, writing 0x5151) pcieport 0000:02:00.0: restoring config space at offset 0x20 (was 0x0, writing 0x8a008a00) pcieport 0000:02:02.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020) pcieport 0000:02:04.0: restoring config space at offset 0x1c (was 0x101, writing 0x6161) pcieport 0000:02:01.0: restoring config space at offset 0x18 (was 0x0, writing 0x360402) pcieport 0000:02:00.0: restoring config space at offset 0x1c (was 0x101, writing 0x1f1) pcieport 0000:02:04.0: restoring config space at offset 0x18 (was 0x0, writing 0x6b3802) pcieport 0000:02:02.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407) pcieport 0000:02:00.0: restoring config space at offset 0x18 (was 0x0, writing 0x30302) pcieport 0000:02:01.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020) pcieport 0000:02:04.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020) pcieport 0000:02:00.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020) pcieport 0000:02:01.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407) pcieport 0000:02:04.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407) pcieport 0000:02:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100407) xhci_hcd 0000:37:00.0: restoring config space at offset 0x10 (was 0x0, writing 0x73f00000) ... thunderbolt 0000:03:00.0: restoring config space at offset 0x14 (was 0x0, writing 0x8a040000) This is even worse. None of the mandatory delays are performed. If this would be S3 instead of s2idle then according to PCI FW spec 3.2 section 4.6.8. there is a specific _DSM that allows the OS to skip the delays but this platform does not provide the _DSM and does not go to S3 anyway so no firmware is involved that could already handle these delays. In this particular Intel Coffee Lake platform these delays are not actually needed because there is an additional delay as part of the ACPI power resource that is used to turn on power to the hierarchy but since that additional delay is not required by any of standards (PCIe, ACPI) it is not present in the Intel Ice Lake, for example where missing the mandatory delays causes pciehp to start tearing down the stack too early (links are not yet trained). For this reason, change the PCIe portdrv PM resume hooks so that they perform the mandatory delays before the downstream component gets resumed. We perform the delays before port services are resumed because otherwise pciehp might find that the link is not up (even if it is just training) and tears-down the hierarchy. Signed-off-by:
-
Alexei Starovoitov authored
[ Upstream commit eea1c227 ] The commit 7640ead9 partially resolved the issue of callees incorrectly pruning the callers. With introduction of bounded loops and jmps_processed heuristic single verifier state may contain multiple branches and calls. It's possible that new verifier state (for future pruning) will be allocated inside callee. Then callee will exit (still within the same verifier state). It will go back to the caller and there R6-R9 registers will be read and will trigger mark_reg_read. But the reg->live for all frames but the top frame is not set to LIVE_NONE. Hence mark_reg_read will fail to propagate liveness into parent and future walking will incorrectly conclude that the states are equivalent because LIVE_READ is not set. In other words the rule for parent/live should be: whenever register parentage chain is set the reg->live should be set to LIVE_NONE. is_state_visited logic already follows this rule for spilled registers. Fixes: 7640ead9 ("bpf: verifier: make sure callees don't prune with caller differences") Fixes: f4d7e40a ("bpf: introduce function calls (verification)") Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Nilkanth Ahirrao authored
[ Upstream commit ac28ec07 ] commit c16015f3 ("ASoC: rsnd: add .get_id/.get_id_sub") introduces rsnd_ctu_id which calcualates and gives the main Device id of the CTU by dividing the id by 4. rsnd_mod_id uses this interface to get the CTU main Device id. But this commit forgets to revert the main Device id calcution previously done in rsnd_ctu_probe_ which also divides the id by 4. This path corrects the same to get the correct main Device id. The issue is observered when rsnd_ctu_probe_ is done for CTU1 Fixes: c16015f3 ("ASoC: rsnd: add .get_id/.get_id_sub") Signed-off-by:
Nilkanth Ahirrao <anilkanth@jp.adit-jv.com> Signed-off-by:
Suresh Udipi <sudipi@jp.adit-jv.com> Signed-off-by:
Jiada Wang <jiada_wang@mentor.com> Acked-by:
-
Denis Kirjanov authored
[ Upstream commit 64d701c6 ] in the case of IPoIB with SRIOV enabled hardware ip link show command incorrecly prints 0 instead of a VF hardware address. Before: 11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast state UP mode DEFAULT group default qlen 256 link/infiniband 80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff vf 0 MAC 00:00:00:00:00:00, spoof checking off, link-state disable, trust off, query_rss off ... After: 11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast state UP mode DEFAULT group default qlen 256 link/infiniband 80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff vf 0 link/infiniband 80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof checking off, link-state disable, trust off, query_rss off v1->v2: just copy an address without modifing ifla_vf_mac v2->v3: update the changelog Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Acked-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Mitch Williams authored
[ Upstream commit efa14c39 ] In some circumstances, the hardware can hand us a null receive descriptor, with no data attached but otherwise valid. Unfortunately, the driver was ill-equipped to handle such an event, and would stop processing packets at that point. To fix this, use the Descriptor Done bit instead of the size to determine whether or not a descriptor is ready to be processed. Add some checks to allow for unused buffers. Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit 098eadce ] Vhost_net was known to suffer from HOL[1] issues which is not easy to fix. Several downstream disable the feature by default. What's more, the datapath was split and datacopy path got the support of batching and XDP support recently which makes it faster than zerocopy part for small packets transmission. It looks to me that disable zerocopy by default is more appropriate. It cold be enabled by default again in the future if we fix the above issues. [1] https://patchwork.kernel.org/patch/3787671/Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit fdbdd7e8 ] In which case it simply returns "unknown", like when it can't figure out the evsel->name value. This makes this code more robust and fixes a problem in 'perf trace' where a NULL evsel was being passed to a routine that only used the evsel for printing its name when a invalid syscall id was passed. Reported-by:
Leo Yan <leo.yan@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-f30ztaasku3z935cn3ak3h53@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit 69d927bb ] Recent probing at the Linux Kernel Memory Model uncovered a 'surprise'. Strongly ordered architectures where the atomic RmW primitive implies full memory ordering and smp_mb__{before,after}_atomic() are a simple barrier() (such as x86) fail for: *x = 1; atomic_inc(u); smp_mb__after_atomic(); r0 = *y; Because, while the atomic_inc() implies memory order, it (surprisingly) does not provide a compiler barrier. This then allows the compiler to re-order like so: atomic_inc(u); *x = 1; smp_mb__after_atomic(); r0 = *y; Which the CPU is then allowed to re-order (under TSO rules) like: atomic_inc(u); r0 = *y; *x = 1; And this very much was not intended. Therefore strengthen the atomic RmW ops to include a compiler barrier. NOTE: atomic_{or,and,xor} and the bitops already had the compiler barrier. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 8c655784 ] With gcc-4.6.3: WARNING: vmlinux.o(.text.unlikely+0x24c64): Section mismatch in reference from the function __integrity_init_keyring() to the function .init.text:set_platform_trusted_keys() The function __integrity_init_keyring() references the function __init set_platform_trusted_keys(). This is often because __integrity_init_keyring lacks a __init annotation or the annotation of set_platform_trusted_keys is wrong. Indeed, if the compiler decides not to inline __integrity_init_keyring(), a warning is issued. Fix this by adding the missing __init annotation. Fixes: 9dc92c45 ("integrity: Define a trusted platform keyring") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Nayna Jain <nayna@linux.ibm.com> Reviewed-by:
James Morris <jamorris@linux.microsoft.com> Signed-off-by:
Mimi Zohar <zohar@linux.ibm.com> Signed-off-by:
-
Kan Liang authored
[ Upstream commit 543ac280 ] Counting with invalid event coding for free-running counter may cause OOPs, e.g. uncore_iio_free_running_0/event=1/. Current code only validate the event with free-running event format, event=0xff,umask=0xXY. Non-free-running event format never be checked for the PMU with free-running counters. Add generic hw_config() to check and reject the invalid event coding for free-running PMU. Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit d0e1a507 ] Tom Vaden reported false failure of the check_msr() function, because some servers can do POST tracing and enable LBR tracing during bootup. Kan confirmed that check_msr patch was to fix a bug report in guest, so it's ok to disable it for real HW. Reported-by:
Tom Vaden <tom.vaden@hpe.com> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 509466b7 ] runnable_avg_yN_inv[] is only used in kernel/sched/pelt.c but was included in several other places because they need other macros all came from kernel/sched/sched-pelt.h which was generated by Documentation/scheduler/sched-pelt. As the result, it causes compilation a lot of warnings, kernel/sched/sched-pelt.h:4:18: warning: 'runnable_avg_yN_inv' defined but not used [-Wunused-const-variable=] kernel/sched/sched-pelt.h:4:18: warning: 'runnable_avg_yN_inv' defined but not used [-Wunused-const-variable=] kernel/sched/sched-pelt.h:4:18: warning: 'runnable_avg_yN_inv' defined but not used [-Wunused-const-variable=] ... Silence it by appending the __maybe_unused attribute for it, so all generated variables and macros can still be kept in the same file. Signed-off-by:
-
Gao Xiang authored
[ Upstream commit e3b929b0 ] Non-inline io_schedule() was introduced in: commit 10ab5643 ("sched/core: Separate out io_schedule_prepare() and io_schedule_finish()") Keep in line with io_schedule_timeout(), otherwise "/proc/<pid>/wchan" will report io_schedule() rather than its callers when waiting for IO. Reported-by:
Jilong Kou <koujilong@huawei.com> Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miao Xie <miaoxie@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 10ab5643 ("sched/core: Separate out io_schedule_prepare() and io_schedule_finish()") Link: https://lkml.kernel.org/r/20190603091338.2695-1-gaoxiang25@huawei.comSigned-off-by:
-
Nicolas Dichtel authored
[ Upstream commit b8d6d007 ] After commit b38ff407, the following command does not work anymore: $ ip xfrm state add src 10.125.0.2 dst 10.125.0.1 proto esp spi 34 reqid 1 \ mode tunnel enc 'cbc(aes)' 0xb0abdba8b782ad9d364ec81e3a7d82a1 auth-trunc \ 'hmac(sha1)' 0xe26609ebd00acb6a4d51fca13e49ea78a72c73e6 96 flag align4 In fact, the selector is not mandatory, allow the user to provide an empty selector. Fixes: b38ff407 ("xfrm: Fix xfrm sel prefix length validation") CC: Anirudh Gupta <anirudh.gupta@sophos.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by:
-
Tejun Heo authored
[ Upstream commit 66311422 ] wbc_account_io() collects information on cgroup ownership of writeback pages to determine which cgroup should own the inode. Pages can stay associated with dead memcgs but we want to avoid attributing IOs to dead blkcgs as much as possible as the association is likely to be stale. However, currently, pages associated with dead memcgs contribute to the accounting delaying and/or confusing the arbitration. Fix it by ignoring pages associated with dead memcgs. Signed-off-by:
-
