- 27 Jul, 2017 40 commits
-
-
Jin Qian authored
commit 21d3f8e1 upstream. Make sure number of entires doesn't exceed max journal size. Signed-off-by:
Jin Qian <jinqian@android.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Damien Le Moal authored
commit acfd2810 upstream. clear_prefree_segments() issues small discards after discarding full segments. These small discards may not be section aligned, so not zone aligned on a zoned block device, causing __f2fs_iissue_discard_zone() to fail. Fix this by not issuing small discards for a volume mounted with the BLKZONED feature enabled. Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
-
Jaegeuk Kim authored
commit 1d7be270 upstream. This allows to freeze gc and discard threads. Signed-off-by:
-
Jin Qian authored
commit 15d3042a upstream. Make sure segno and blkoff read from raw image are valid. Signed-off-by:
Jin Qian <jinqian@google.com> [Jaegeuk Kim: adjust minor coding style] Signed-off-by:
-
Chao Yu authored
commit e31b9821 upstream. There could be more than one waiter waiting discard IO completion, so we need use complete_all() instead of complete() in f2fs_submit_discard_endio to avoid hungtask. Fixes: ec9895ad ("f2fs: don't hold cmd_lock during waiting discard command") Signed-off-by:
-
Jaegeuk Kim authored
commit 93607124 upstream. This patch fixes missing inode flag loaded from disk, reported by Tom. [tom@localhost ~]$ sudo mount /dev/loop0 /mnt/ [tom@localhost ~]$ sudo chown tom:tom /mnt/ [tom@localhost ~]$ touch /mnt/testfile [tom@localhost ~]$ sudo chattr +i /mnt/testfile [tom@localhost ~]$ echo test > /mnt/testfile bash: /mnt/testfile: Operation not permitted [tom@localhost ~]$ rm /mnt/testfile rm: cannot remove '/mnt/testfile': Operation not permitted [tom@localhost ~]$ sudo umount /mnt/ [tom@localhost ~]$ sudo mount /dev/loop0 /mnt/ [tom@localhost ~]$ lsattr /mnt/testfile ----i-------------- /mnt/testfile [tom@localhost ~]$ echo test > /mnt/testfile [tom@localhost ~]$ rm /mnt/testfile [tom@localhost ~]$ sudo umount /mnt/ Reported-by:
Tom Yan <tom.ty89@outlook.com> Signed-off-by:
-
Pavel Shilovsky authored
commit 511c54a2 upstream. According to the MS-SMB2 spec (3.2.5.1.6) once the client receives STATUS_NETWORK_SESSION_EXPIRED error code from a server it should reconnect the current SMB session. Currently the client doesn't do that. This can result in subsequent client requests failing by the server. The patch adds an additional logic to the demultiplex thread to identify expired sessions and reconnect them. Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Jan Kara authored
commit 8ba35875 upstream. When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit set, DIR1 is expected to have SGID bit set (and owning group equal to the owning group of 'DIR0'). However when 'DIR0' also has some default ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on 'DIR1' to get cleared if user is not member of the owning group. Fix the problem by calling __xfs_set_acl() instead of xfs_set_acl() when setting up inode in xfs_generic_create(). That prevents SGID bit clearing and mode is properly set by posix_acl_create() anyway. We also reorder arguments of __xfs_set_acl() to match the ordering of xfs_set_acl() to make things consistent. Fixes: 07393101 CC: Darrick J. Wong <darrick.wong@oracle.com> CC: linux-xfs@vger.kernel.org Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Corey Minyard authored
commit 4495ec6d upstream. When getting flags, a response to a different message would result in a deadlock because of a missing unlock. Add that unlock and a comment. Found by static analysis. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Tony Camuso authored
commit cdea4656 upstream. A vendor with a system having more than 128 CPUs occasionally encounters the following crash during shutdown. This is not an easily reproduceable event, but the vendor was able to provide the following analysis of the crash, which exhibits the same footprint each time. crash> bt PID: 0 TASK: ffff88017c70ce70 CPU: 5 COMMAND: "swapper/5" #0 [ffff88085c143ac8] machine_kexec at ffffffff81059c8b #1 [ffff88085c143b28] __crash_kexec at ffffffff811052e2 #2 [ffff88085c143bf8] crash_kexec at ffffffff811053d0 #3 [ffff88085c143c10] oops_end at ffffffff8168ef88 #4 [ffff88085c143c38] no_context at ffffffff8167ebb3 #5 [ffff88085c143c88] __bad_area_nosemaphore at ffffffff8167ec49 #6 [ffff88085c143cd0] bad_area_nosemaphore at ffffffff8167edb3 #7 [ffff88085c143ce0] __do_page_fault at ffffffff81691d1e #8 [ffff88085c143d40] do_page_fault at ffffffff81691ec5 #9 [ffff88085c143d70] page_fault at ffffffff8168e188 [exception RIP: unknown or invalid address] RIP: ffffffffa053c800 RSP: ffff88085c143e28 RFLAGS: 00010206 RAX: ffff88017c72bfd8 RBX: ffff88017a8dc000 RCX: ffff8810588b5ac8 RDX: ffff8810588b5a00 RSI: ffffffffa053c800 RDI: ffff8810588b5a00 RBP: ffff88085c143e58 R8: ffff88017c70d408 R9: ffff88017a8dc000 R10: 0000000000000002 R11: ffff88085c143da0 R12: ffff8810588b5ac8 R13: 0000000000000100 R14: ffffffffa053c800 R15: ffff8810588b5a00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 <IRQ stack> [exception RIP: cpuidle_enter_state+82] RIP: ffffffff81514192 RSP: ffff88017c72be50 RFLAGS: 00000202 RAX: 0000001e4c3c6f16 RBX: 000000000000f8a0 RCX: 0000000000000018 RDX: 0000000225c17d03 RSI: ffff88017c72bfd8 RDI: 0000001e4c3c6f16 RBP: ffff88017c72be78 R8: 000000000000237e R9: 0000000000000018 R10: 0000000000002494 R11: 0000000000000001 R12: ffff88017c72be20 R13: ffff88085c14f8e0 R14: 0000000000000082 R15: 0000001e4c3bb400 ORIG_RAX: ffffffffffffff10 CS: 0010 SS: 0018 This is the corresponding stack trace It has crashed because the area pointed with RIP extracted from timer element is already removed during a shutdown process. The function is smi_timeout(). And we think ffff8810588b5a00 in RDX is a parameter struct smi_info crash> rd ffff8810588b5a00 20 ffff8810588b5a00: ffff8810588b6000 0000000000000000 .`.X............ ffff8810588b5a10: ffff880853264400 ffffffffa05417e0 .D&S......T..... ffff8810588b5a20: 24a024a000000000 0000000000000000 .....$.$........ ffff8810588b5a30: 0000000000000000 0000000000000000 ................ ffff8810588b5a30: 0000000000000000 0000000000000000 ................ ffff8810588b5a40: ffffffffa053a040 ffffffffa053a060 @.S.....`.S..... ffff8810588b5a50: 0000000000000000 0000000100000001 ................ ffff8810588b5a60: 0000000000000000 0000000000000e00 ................ ffff8810588b5a70: ffffffffa053a580 ffffffffa053a6e0 ..S.......S..... ffff8810588b5a80: ffffffffa053a4a0 ffffffffa053a250 ..S.....P.S..... ffff8810588b5a90: 0000000500000002 0000000000000000 ................ Unfortunately the top of this area is already detroyed by someone. But because of two reasonns we think this is struct smi_info 1) The address included in between ffff8810588b5a70 and ffff8810588b5a80: are inside of ipmi_si_intf.c see crash> module ffff88085779d2c0 2) We've found the area which point this. It is offset 0x68 of ffff880859df4000 crash> rd ffff880859df4000 100 ffff880859df4000: 0000000000000000 0000000000000001 ................ ffff880859df4010: ffffffffa0535290 dead000000000200 .RS............. ffff880859df4020: ffff880859df4020 ffff880859df4020 @.Y.... @.Y.... ffff880859df4030: 0000000000000002 0000000000100010 ................ ffff880859df4040: ffff880859df4040 ffff880859df4040 @@.Y....@@.Y.... ffff880859df4050: 0000000000000000 0000000000000000 ................ ffff880859df4060: 0000000000000000 ffff8810588b5a00 .........Z.X.... ffff880859df4070: 0000000000000001 ffff880859df4078 ........x@.Y.... If we regards it as struct ipmi_smi in shutdown process it looks consistent. The remedy for this apparent race is affixed below. Signed-off-by:
Tony Camuso <tcamuso@redhat.com> Signed-off-by:
-
Eric Anholt authored
commit 8555137e upstream. Without this, polling on the dma-buf (and presumably other devices synchronizing against our rendering) would return immediately, even while the BO was busy. Signed-off-by:
Eric Anholt <eric@anholt.net> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: etnaviv@lists.freedesktop.org Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
John Brooks authored
commit 8046e195 upstream. We unref the man->move fence in ttm_bo_clean_mm() and then call ttm_bo_force_list_clean() which waits on it, except the refcount is now zero so a warning is generated (or worse): [149492.279301] refcount_t: increment on 0; use-after-free. [149492.279309] ------------[ cut here ]------------ [149492.279315] WARNING: CPU: 3 PID: 18726 at lib/refcount.c:150 refcount_inc+0x2b/0x30 [149492.279315] Modules linked in: vhost_net vhost tun x86_pkg_temp_thermal crc32_pclmul ghash_clmulni_intel efivarfs amdgpu( -) i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm [149492.279326] CPU: 3 PID: 18726 Comm: rmmod Not tainted 4.12.0-rc5-drm-next-4.13-ttmpatch+ #1 [149492.279326] Hardware name: Gigabyte Technology Co., Ltd. Z97X-UD3H-BK/Z97X-UD3H-BK-CF, BIOS F6 06/17/2014 [149492.279327] task: ffff8804ddfedcc0 task.stack: ffffc90008d20000 [149492.279329] RIP: 0010:refcount_inc+0x2b/0x30 [149492.279330] RSP: 0018:ffffc90008d23c30 EFLAGS: 00010286 [149492.279331] RAX: 000000000000002b RBX: 0000000000000170 RCX: 0000000000000000 [149492.279331] RDX: 0000000000000000 RSI: ffff88051ecccbe8 RDI: ffff88051ecccbe8 [149492.279332] RBP: ffffc90008d23c30 R08: 0000000000000001 R09: 00000000000003ee [149492.279333] R10: ffffc90008d23bb0 R11: 00000000000003ee R12: ffff88043aaac960 [149492.279333] R13: ffff8805005e28a8 R14: 0000000000000002 R15: ffff88050115e178 [149492.279334] FS: 00007fc540168700(0000) GS:ffff88051ecc0000(0000) knlGS:0000000000000000 [149492.279335] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [149492.279336] CR2: 00007fc3e8654140 CR3: 000000027ba77000 CR4: 00000000001426e0 [149492.279337] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [149492.279337] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [149492.279338] Call Trace: [149492.279345] ttm_bo_force_list_clean+0xb9/0x110 [ttm] [149492.279348] ttm_bo_clean_mm+0x7a/0xe0 [ttm] [149492.279375] amdgpu_ttm_fini+0xc9/0x1f0 [amdgpu] [149492.279392] amdgpu_bo_fini+0x12/0x40 [amdgpu] [149492.279415] gmc_v7_0_sw_fini+0x32/0x40 [amdgpu] [149492.279430] amdgpu_fini+0x2c9/0x490 [amdgpu] [149492.279445] amdgpu_device_fini+0x58/0x1b0 [amdgpu] [149492.279461] amdgpu_driver_unload_kms+0x4f/0xa0 [amdgpu] [149492.279470] drm_dev_unregister+0x3c/0xe0 [drm] [149492.279485] amdgpu_pci_remove+0x19/0x30 [amdgpu] [149492.279487] pci_device_remove+0x39/0xc0 [149492.279490] device_release_driver_internal+0x155/0x210 [149492.279491] driver_detach+0x38/0x70 [149492.279493] bus_remove_driver+0x4c/0xa0 [149492.279494] driver_unregister+0x2c/0x40 [149492.279496] pci_unregister_driver+0x21/0x90 [149492.279520] amdgpu_exit+0x15/0x406 [amdgpu] [149492.279523] SyS_delete_module+0x1a8/0x270 [149492.279525] ? exit_to_usermode_loop+0x92/0xa0 [149492.279528] entry_SYSCALL_64_fastpath+0x13/0x94 [149492.279529] RIP: 0033:0x7fc53fcb68e7 [149492.279529] RSP: 002b:00007ffcfbfaabb8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [149492.279531] RAX: ffffffffffffffda RBX: 0000563117adb200 RCX: 00007fc53fcb68e7 [149492.279531] RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000563117adb268 [149492.279532] RBP: 0000000000000003 R08: 0000000000000000 R09: 1999999999999999 [149492.279533] R10: 0000000000000883 R11: 0000000000000206 R12: 00007ffcfbfa9ba0 [149492.279533] R13: 0000000000000000 R14: 0000000000000000 R15: 0000563117adb200 [149492.279534] Code: 55 48 89 e5 e8 77 fe ff ff 84 c0 74 02 5d c3 80 3d 40 f2 a4 00 00 75 f5 48 c7 c7 20 3c ca 81 c6 05 30 f2 a4 00 01 e8 91 f0 d7 ff <0f> ff 5d c3 90 55 48 89 fe bf 01 00 00 00 48 89 e5 e8 9f fe ff [149492.279557] ---[ end trace 2d4e0ffcb66a1016 ]--- Unref the fence *after* waiting for it. v2: Set man->move to NULL after dropping the last ref (Christian König) Fixes: aff98ba1 (drm/ttm: wait for eviction in ttm_bo_force_list_clean) Signed-off-by:
John Brooks <john@fastquake.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Mario Kleiner authored
commit 564d8a2c upstream. The late 2009, 27 inch Apple iMac10,1 has an internal eDP display and an external Mini- Displayport output, driven by a DCE-3.2, RV730 Radeon Mobility HD-4670. The machine worked fine in a dual-display setup with eDP panel + externally connected HDMI or DVI-D digital display sink, connected via MiniDP to DVI or HDMI adapter. However, booting the machine single-display with only eDP panel results in a completely black display - even backlight powering off, as soon as the radeon modesetting driver loads. This patch fixes the single dispay eDP case by assigning encoders based on dig->linkb, similar to DCE-4+. While this should not be generally necessary (Alex: "...atom on normal boards should be able to handle any mapping."), Apple seems to use some special routing here. One remaining problem not solved by this patch is that an external Minidisplayport->DP sink does still not work on iMac10,1, whereas external DVI and HDMI sinks continue to work. The problem affects at least all tested kernels since Linux 3.13 - didn't test earlier kernels, so backporting to stable probably makes sense. v2: With the original patch from 2016, Alex was worried it will break other DCE3.2 systems. Use dmi_match() to apply this special encoder assignment only for the Apple iMac 10,1 from late 2009. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Alex Deucher authored
commit ab03d9fe upstream. Even if the vblank period would allow it, it still seems to be problematic on some cards. v2: fix logic inversion (Nils) bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868Acked-by:
-
John Brooks authored
commit 7bc7b777 upstream. amd_powerplay_destroy() expects a handle pointing to a struct pp_instance. On chips without PowerPlay, pp_handle points to a struct amdgpu_device. The resulting attempt to kfree() fields of the wrong struct ends in fire: [ 91.560405] BUG: unable to handle kernel paging request at ffffebe000000620 [ 91.560414] IP: kfree+0x57/0x160 [ 91.560416] PGD 0 [ 91.560416] P4D 0 [ 91.560420] Oops: 0000 [#1] SMP [ 91.560422] Modules linked in: tun x86_pkg_temp_thermal crc32_pclmul ghash_clmulni_intel efivarfs amdgpu(-) i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm [ 91.560438] CPU: 6 PID: 3598 Comm: rmmod Not tainted 4.12.0-rc5-drm-next-4.13-ttmpatch+ #1 [ 91.560443] Hardware name: Gigabyte Technology Co., Ltd. Z97X-UD3H-BK/Z97X-UD3H-BK-CF, BIOS F6 06/17/2014 [ 91.560448] task: ffff8805063d6a00 task.stack: ffffc90003400000 [ 91.560451] RIP: 0010:kfree+0x57/0x160 [ 91.560454] RSP: 0018:ffffc90003403cc0 EFLAGS: 00010286 [ 91.560457] RAX: 000077ff80000000 RBX: 00000000000186a0 RCX: 0000000180400035 [ 91.560460] RDX: 0000000180400036 RSI: ffffea001418e740 RDI: ffffea0000000000 [ 91.560463] RBP: ffffc90003403cd8 R08: 000000000639d201 R09: 0000000180400035 [ 91.560467] R10: ffffebe000000600 R11: 0000000000000300 R12: ffff880500530030 [ 91.560470] R13: ffffffffa01e70fc R14: 00000000ffffffff R15: ffff880500530000 [ 91.560473] FS: 00007f7e500c3700(0000) GS:ffff88051ed80000(0000) knlGS:0000000000000000 [ 91.560478] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 91.560480] CR2: ffffebe000000620 CR3: 0000000503103000 CR4: 00000000001406e0 [ 91.560483] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 91.560487] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 91.560489] Call Trace: [ 91.560530] amd_powerplay_destroy+0x1c/0x60 [amdgpu] [ 91.560558] amdgpu_pp_late_fini+0x44/0x60 [amdgpu] [ 91.560575] amdgpu_fini+0x254/0x490 [amdgpu] [ 91.560593] amdgpu_device_fini+0x58/0x1b0 [amdgpu] [ 91.560610] amdgpu_driver_unload_kms+0x4f/0xa0 [amdgpu] [ 91.560622] drm_dev_unregister+0x3c/0xe0 [drm] [ 91.560638] amdgpu_pci_remove+0x19/0x30 [amdgpu] [ 91.560643] pci_device_remove+0x39/0xc0 [ 91.560648] device_release_driver_internal+0x155/0x210 [ 91.560651] driver_detach+0x38/0x70 [ 91.560655] bus_remove_driver+0x4c/0xa0 [ 91.560658] driver_unregister+0x2c/0x40 [ 91.560662] pci_unregister_driver+0x21/0x90 [ 91.560689] amdgpu_exit+0x15/0x406 [amdgpu] [ 91.560694] SyS_delete_module+0x1a8/0x270 [ 91.560698] ? exit_to_usermode_loop+0x92/0xa0 [ 91.560702] entry_SYSCALL_64_fastpath+0x13/0x94 [ 91.560705] RIP: 0033:0x7f7e4fc118e7 [ 91.560708] RSP: 002b:00007fff978ca118 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 91.560713] RAX: ffffffffffffffda RBX: 000055afe21bc200 RCX: 00007f7e4fc118e7 [ 91.560716] RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055afe21bc268 [ 91.560719] RBP: 0000000000000003 R08: 0000000000000000 R09: 1999999999999999 [ 91.560722] R10: 0000000000000883 R11: 0000000000000206 R12: 00007fff978c9100 [ 91.560725] R13: 0000000000000000 R14: 0000000000000000 R15: 000055afe21bc200 [ 91.560728] Code: 00 00 00 80 ff 77 00 00 48 bf 00 00 00 00 00 ea ff ff 49 01 da 48 0f 42 05 57 33 bd 00 49 01 c2 49 c1 ea 0c 49 c1 e2 06 49 01 fa <49> 8b 42 20 48 8d 78 ff a8 01 4c 0f 45 d7 49 8b 52 20 48 8d 42 [ 91.560759] RIP: kfree+0x57/0x160 RSP: ffffc90003403cc0 [ 91.560761] CR2: ffffebe000000620 [ 91.560765] ---[ end trace 08a9f3cd82223c1d ]--- Fixes: 1c863802 (drm/amd/powerplay: refine powerplay interface.) Signed-off-by:
-
Huang Rui authored
commit 67bef0f7 upstream. psp->cmd will be used on resume phase, so we can not free it on hw_init. Otherwise, a memory corruption will be triggered. Signed-off-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
Xiaojie Yuan <Xiaojie.Yuan@amd.com> Signed-off-by:
-
Tom St Denis authored
commit 9156e723 upstream. If you initiate a read that is out of the VRAM address space return ENXIO instead of 0. Reads that begin below that point will read upto the VRAM limit as before. Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
-
Alex Deucher authored
commit 73cc9079 upstream. It's relevent regardless of whether there are displays enabled. Fixes garbage values for ref clock in powerplay leading to incorrect fan speed reporting when displays are disabled. bug: https://bugs.freedesktop.org/show_bug.cgi?id=101653Acked-by:
-
Alex Deucher authored
commit beb37776 upstream. If the displays are off, set the vblank time to max to make sure mclk switching is enabled. Avoid mclk getting set to high when no displays are attached. bug: https://bugs.freedesktop.org/show_bug.cgi?id=101528 fixes: 09be4a52 (drm/amd/powerplay/smu7: add vblank check for mclk switching (v2)) Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 943c05bd upstream. Always use the max for the family rather than the per sku limits. This makes sure the mask is always the max size to avoid reporting the wrong number of CUs. Reviewed-by:
Alex Xie <AlexBin.Xie@amd.com> Reviewed-by:
Andres Rodriguez <andresx7@gmail.com> Signed-off-by:
-
Jiri Olsa authored
commit c46fc042 upstream. Zorro reported following crash while having enabled syscall tracing (CONFIG_FTRACE_SYSCALLS): Unable to handle kernel pointer dereference at virtual ... Oops: 0011 [#1] SMP DEBUG_PAGEALLOC SNIP Call Trace: ([<000000000024d79c>] ftrace_syscall_enter+0xec/0x1d8) [<00000000001099c6>] do_syscall_trace_enter+0x236/0x2f8 [<0000000000730f1c>] sysc_tracesys+0x1a/0x32 [<000003fffcf946a2>] 0x3fffcf946a2 INFO: lockdep is turned off. Last Breaking-Event-Address: [<000000000022dd44>] rb_event_data+0x34/0x40 ---[ end trace 8c795f86b1b3f7b9 ]--- The crash happens in syscall_get_arguments function for syscalls with zero arguments, that will try to access first argument (args[0]) in event entry, but it's not allocated. Bail out of there are no arguments. Reported-by:
Zorro Lang <zlang@redhat.com> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Xiao Ni authored
commit b5d27718 upstream. The raid5 md device is created by the disks which we don't use the total size. For example, the size of the device is 5G and it just uses 3G of the devices to create one raid5 device. Then change the chunksize and wait reshape to finish. After reshape finishing stop the raid and assemble it again. It fails. mdadm -CR /dev/md0 -l5 -n3 /dev/loop[0-2] --size=3G --chunk=32 --assume-clean mdadm /dev/md0 --grow --chunk=64 wait reshape to finish mdadm -S /dev/md0 mdadm -As The error messages: [197519.814302] md: loop1 does not have a valid v1.2 superblock, not importing! [197519.821686] md: md_import_device returned -22 After reshape the data offset is changed. It selects backwards direction in this condition. In function super_1_load it compares the available space of the underlying device with sb->data_size. The new data offset gets bigger after reshape. So super_1_load returns -EINVAL. rdev->sectors is updated in md_finish_reshape. Then sb->data_size is set in super_1_sync based on rdev->sectors. So add md_finish_reshape in end_reshape. Signed-off-by:
Xiao Ni <xni@redhat.com> Acked-by:
Guoqing Jiang <gqjiang@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Heinz Mauelshagen authored
commit 4d49f1b4 upstream. Return 0 rather than BUG() if __rdev_sectors() fails and catch invalid rdev size in the constructor. Reported-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Jan Kara authored
commit a992f2d3 upstream. When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit set, DIR1 is expected to have SGID bit set (and owning group equal to the owning group of 'DIR0'). However when 'DIR0' also has some default ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on 'DIR1' to get cleared if user is not member of the owning group. Fix the problem by creating __ext2_set_acl() function that does not call posix_acl_update_mode() and use it when inheriting ACLs. That prevents SGID bit clearing and the mode has been properly set by posix_acl_create() anyway. Fixes: 07393101 CC: linux-ext4@vger.kernel.org Signed-off-by:
-
Toshi Kani authored
commit 4e3f0701 upstream. __add_badblock_range() does not account sector alignment when it sets 'num_sectors'. Therefore, an ARS error record range spanning across two sectors is set to a single sector length, which leaves the 2nd sector unprotected. Change __add_badblock_range() to set 'num_sectors' properly. Fixes: 0caeef63 ("libnvdimm: Add a poison list and export badblocks") Signed-off-by:
Toshi Kani <toshi.kani@hpe.com> Reviewed-by:
Vishal Verma <vishal.l.verma@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Vishal Verma authored
commit 7e5a21df upstream. A leftover from the 'bandaid' fix that disabled BTT error clearing in rw_bytes resulted in an incorrect check. After we converted these checks over to use the NVDIMM_IO_ATOMIC flag, the ndns->claim check was both redundant, and incorrect. Remove it. Fixes: 3ae3d67b ("libnvdimm: add an atomic vs process context flag to rw_bytes") Cc: Dave Jiang <dave.jiang@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Vishal Verma authored
commit c13c43d5 upstream. btt_rw_page was not propagating errors frm btt_do_bvec, resulting in any IO errors via the rw_page path going unnoticed. the pmem driver recently fixed this in e10624f8 pmem: fail io-requests to known bad blocks but same problem in BTT went neglected. Fixes: 5212e11f ("nd_btt: atomic sector updates") Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
-
Yasunori Goto authored
commit a117699c upstream. The root cause of panic is the num_pm of nfit_test1 is wrong. Though 1 is specified for num_pm at nfit_test_init(), it must be 2, because nfit_test1->spa_set[] array has 2 elements. Since the array is smaller than expected, the driver breaks other area. (it is often the link list of devres). As a result, panic occurs like the following example. CPU: 4 PID: 2233 Comm: lt-libndctl Tainted: G O 4.12.0-rc1+ #12 RIP: 0010:__list_del_entry_valid+0x6c/0xa0 Call Trace: release_nodes+0x76/0x260 devres_release_all+0x3c/0x50 device_release_driver_internal+0x159/0x200 device_release_driver+0x12/0x20 bus_remove_device+0xfd/0x170 device_del+0x1e8/0x330 platform_device_del+0x28/0x90 platform_device_unregister+0x12/0x30 nfit_test_exit+0x2a/0x93b [nfit_test] Signed-off-by:
Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by:
-
David Härdeman authored
commit b2aceb73 upstream. The call to input_register_device() needs to take place before the repeat parameters are set or the input subsystem repeat handling will be disabled (as was already noted in the comments in that function). Signed-off-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Devin Heitmueller authored
commit 4e0973a9 upstream. Setting initial standard at the top of cx8800_initdev would cause the first call to cx88_set_tvnorm() to return without programming any registers (leaving the driver saying it's set to NTSC but the hardware isn't programmed). Even worse, any subsequent attempt to explicitly set it to NTSC-M will return success but actually fail to program the underlying registers unless first changing the standard to something other than NTSC-M. Set the initial standard later in the process, and make sure the field is zero at the beginning to ensure that the call always goes through. This regression was introduced in the following commit: commit ccd6f1d4 ("[media] cx88: move width, height and field to core struct") Author: Hans Verkuil <hans.verkuil@cisco.com> [media] cx88: move width, height and field to core struct Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Marek Marczykowski-Górecki authored
commit c54590ca upstream. Userspace application can do a hypercall through /dev/xen/privcmd, and some for some hypercalls argument is a pointers to user-provided structure. When SMAP is supported and enabled, hypervisor can't access. So, lets allow it. The same applies to HYPERVISOR_dm_op, where additionally privcmd driver carefully verify buffer addresses. Signed-off-by:
Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
NeilBrown authored
commit cc27b0c7 upstream. If mddev_suspend() races with md_write_start() we can deadlock with mddev_suspend() waiting for the request that is currently in md_write_start() to complete the ->make_request() call, and md_write_start() waiting for the metadata to be updated to mark the array as 'dirty'. As metadata updates done by md_check_recovery() only happen then the mddev_lock() can be claimed, and as mddev_suspend() is often called with the lock held, these threads wait indefinitely for each other. We fix this by having md_write_start() abort if mddev_suspend() is happening, and ->make_request() aborts if md_write_start() aborted. md_make_request() can detect this abort, decrease the ->active_io count, and wait for mddev_suspend(). Reported-by:
Nix <nix@esperi.org.uk> Fix: 68866e42(MD: no sync IO while suspended) Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
Mikulas Patocka authored
commit f9c79bc0 upstream. The function flush_signals clears all pending signals for the process. It may be used by kernel threads when we need to prepare a kernel thread for responding to signals. However using this function for an userspaces processes is incorrect - clearing signals without the program expecting it can cause misbehavior. The raid1 and raid5 code uses flush_signals in its request routine because it wants to prepare for an interruptible wait. This patch drops flush_signals and uses sigprocmask instead to block all signals (including SIGKILL) around the schedule() call. The signals are not lost, but the schedule() call won't respond to them. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Acked-by:
-
Dmitry Torokhov authored
commit 4cf56a89 upstream. Now that input core insists on having dev->absinfo when device claims to generate EV_ABS in its dev->evbit, we should not be blindly setting that bit. The code in question might have been needed before input_set_abs_params() started setting EV_ABS in device's evbit, but not anymore, and is now breaking devices such as SMART SPNL-6075 Touchscreen. Fixes: 6ecfe51b ("Input: refuse to register absolute devices ...") Reported-by:
Matthias Fend <Matthias.Fend@wolfvision.net> Tested-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Yoshihiro Shimoda authored
commit b8b9c974 upstream. A gadget driver will not disable eps immediately when ->disconnect() is called. But, since this driver assumes all eps stop after the ->disconnect(), unexpected behavior happens (especially in system suspend). So, this patch disables all eps in usbhsg_try_stop(). After disabling eps by renesas_usbhs driver, since some functions will be called by both a gadget and renesas_usbhs driver, renesas_usbhs driver should protect uep->pipe. To protect uep->pipe easily, this patch adds a new lock in struct usbhsg_uep. Fixes: 2f98382d ("usb: renesas_usbhs: Add Renesas USBHS Gadget") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Yoshihiro Shimoda authored
commit 59a0879a upstream. This patch fixes an issue that some registers may be not initialized after resume if the USBHSF_RUNTIME_PWCTRL is not set. Otherwise, if a cable is not connected, the driver will not enable INTENB0.VBSE after resume. And then, the driver cannot detect the VBUS. Fixes: ca8a282a ("usb: gadget: renesas_usbhs: add suspend/resume support") Signed-off-by:
-
Johan Hovold authored
commit fe855789 upstream. Add device-id entry for DATECS FP-2000 fiscal printer needing the NO_UNION_NORMAL quirk. Reported-by:
Anton Avramov <lukav@lukav.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Colin Ian King authored
commit 446230f5 upstream. When us->extra is null the driver is not initialized, however, a later call to osd200_scsi_to_ata is made that dereferences us->extra, causing a null pointer dereference. The code currently detects and reports that the driver is not initialized; add a return to avoid the subsequent dereference issue in this check. Thanks to Alan Stern for pointing out that srb->result needs setting to DID_ERROR << 16 Detected by CoverityScan, CID#100308 ("Dereference after null check") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Devin Heitmueller authored
commit d90b336f upstream. The recent changes in 4.9 to mandate USB buffers be heap allocated broke this driver, which was allocating the buffers on the stack. This resulted in the device failing at initialization. Introduce dedicated send/receive buffers as part of the state structure, and add a mutex to protect access to them. Note: we also had to tweak the API to mxl111sf_ctrl_msg to pass the pointer to the state struct rather than the device, since we need it inside the function to access the buffers and the mutex. This patch adjusts the callers to match the API change. Signed-off-by:
Doug Lung <dlung0@gmail.com> Cc: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Jiahau Chang authored
commit 9da5a109 upstream. When USB Ethernet is plugged in ASMEDIA ASM1042A xHCI host, bad performance was manifesting in Web browser use (like download large file such as ISO image). It is known limitation of ASM1042A that is not compatible with driver scheduling, As a workaround we can modify flow control handling of ASM1042A. The register we modify is changes the behavior [use quirk bit 28, usleep_range 40-60us, empty non-pci function -Mathias] Signed-off-by:
Jiahau Chang <Lars_chang@asmedia.com.tw> Signed-off-by:
Ian Pilcher <arequipeno@gmail.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
