- 13 Dec, 2015 40 commits
-
-
Eric Dumazet authored
commit 161642e2 upstream. Recent TCP listener patches exposed a prior af_packet bug : match_fanout_group() blindly assumes it is always safe to cast sk to a packet socket to compare fanout with af_packet_priv But SYNACK packets can be sent while attached to request_sock, which are smaller than a "struct sock". We can read non existent memory and crash. Fixes: c0de08d0 ("af_packet: don't emit packet on orig fanout group") Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Eric Leblond <eric@regit.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Eric W. Biederman authored
commit 850dcc4d upstream. After a packet has been encapsulated by a tunnel we should use the tunnel sockets local multicast loopback flag to control if the encapsulated packet should be locally loopback back. Pass sk into ip_local_out_sk so that in the rare case we are dealing with a tunneled packet whose tunnel destination address is a multicast address the kernel properly decides to loopback this packet. In practice I don't think this matters as ip_queue_xmit is used by tcp, l2tp and sctp none of which I am aware of uses ip level multicasting as they are all point to point communications protocols. Let's fix this before someone uses ip_queue_xmit for a tunnel protocol that does use multicast. Fixes: aad88724 ("ipv4: add a sock pointer to dst->output() path.") Fixes: b0270e91 ("ipv4: add a sock pointer to ip_queue_xmit()") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Flavio Leitner authored
commit 0647e708 upstream. Remove __nf_conntrack_find() from headers. Fixes: dcd93ed4 ("netfilter: nf_conntrack: remove dead code") Signed-off-by:
Flavio Leitner <fbl@sysclose.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Dan Carpenter authored
commit 1f35d04a upstream. The iomap[] array has PCIM_IOMAP_MAX (6) elements and not DEVICE_COUNT_RESOURCE (16). This bug was found using a static checker. It may be that the "if (!(mask & (1 << i)))" check means we never actually go past the end of the array in real life. Fixes: ec04b075 ('iomap: implement pcim_iounmap_regions()') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Jonas Gorski authored
commit db1319e1 upstream. Commit d445913c ("usb: ehci-orion: add optional PHY support") added support for optional phys, but devm_phy_optional_get returns -ENOSYS if GENERIC_PHY is not enabled. This causes probe failures, even when there are no phys specified: [ 1.443365] orion-ehci f1058000.usb: init f1058000.usb fail, -38 [ 1.449403] orion-ehci: probe of f1058000.usb failed with error -38 Similar to dwc3, treat -ENOSYS as no phy. Fixes: d445913c ("usb: ehci-orion: add optional PHY support") Signed-off-by:
Jonas Gorski <jogo@openwrt.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Andy Shevchenko authored
commit 39416677 upstream. We replace __fls() by __ffs() since we have to find a *minimum* data width that satisfies both source and destination. While here, rename dwc_fast_fls() to dwc_fast_ffs() which it really is. Fixes: 4c2d56c5 (dw_dmac: introduce dwc_fast_fls()) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Dan Carpenter authored
commit 1f9c6e1b upstream. There were several bugs here. 1) The done label was in the wrong place so we didn't copy any information out when there was no command given. 2) We were using PAGE_SIZE as the size of the buffer instead of "PAGE_SIZE - pos". 3) snprintf() returns the number of characters that would have been printed if there were enough space. If there was not enough space (and we had fixed the memory corruption bug #2) then it would result in an information leak when we do simple_read_from_buffer(). I've changed it to use scnprintf() instead. I also removed the initialization at the start of the function, because I thought it made the code a little more clear. Fixes: 5e6e3a92 ('wireless: mwifiex: initial commit for Marvell mwifiex driver') Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Valentin Rothberg authored
commit 90adf98d upstream. Since commit 1c6c6952 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. scripts/coccinelle/misc/irqf_oneshot.cocci detected this issue. Fixes: b5874f33 ("wm831x_power: Use genirq") Signed-off-by:
Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Johannes Berg authored
commit 8ec6d978 upstream. The ifmgd->ave_beacon_signal value cannot be taken as is for comparisons, it must be divided by since it's represented like that for better accuracy of the EWMA calculations. This would lead to invalid driver RSSI events. Fix the used value. Fixes: 615f7b9b ("mac80211: add driver RSSI threshold events") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Christophe Leroy authored
commit 0ff28d9f upstream. Using sendfile with below small program to get MD5 sums of some files, it appear that big files (over 64kbytes with 4k pages system) get a wrong MD5 sum while small files get the correct sum. This program uses sendfile() to send a file to an AF_ALG socket for hashing. /* md5sum2.c */ int main(int argc, char **argv) { int sk = socket(AF_ALG, SOCK_SEQPACKET, 0); struct stat st; struct sockaddr_alg sa = { .salg_family = AF_ALG, .salg_type = "hash", .salg_name = "md5", }; int n; bind(sk, (struct sockaddr*)&sa, sizeof(sa)); for (n = 1; n < argc; n++) { int size; int offset = 0; char buf[4096]; int fd; int sko; int i; fd = open(argv[n], O_RDONLY); sko = accept(sk, NULL, 0); fstat(fd, &st); size = st.st_size; sendfile(sko, fd, &offset, size); size = read(sko, buf, sizeof(buf)); for (i = 0; i < size; i++) printf("%2.2x", buf[i]); printf(" %s\n", argv[n]); close(fd); close(sko); } exit(0); } Test below is done using official linux patch files. First result is with a software based md5sum. Second result is with the program above. root@vgoip:~# ls -l patch-3.6.* -rw-r--r-- 1 root root 64011 Aug 24 12:01 patch-3.6.2.gz -rw-r--r-- 1 root root 94131 Aug 24 12:01 patch-3.6.3.gz root@vgoip:~# md5sum patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz root@vgoip:~# ./md5sum2 patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz 5fd77b24e68bb24dcc72d6e57c64790e patch-3.6.3.gz After investivation, it appears that sendfile() sends the files by blocks of 64kbytes (16 times PAGE_SIZE). The problem is that at the end of each block, the SPLICE_F_MORE flag is missing, therefore the hashing operation is reset as if it was the end of the file. This patch adds SPLICE_F_MORE to the flags when more data is pending. With the patch applied, we get the correct sums: root@vgoip:~# md5sum patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz root@vgoip:~# ./md5sum2 patch-3.6.* b3ffb9848196846f31b2ff133d2d6443 patch-3.6.2.gz c5e8f687878457db77cb7158c38a7e43 patch-3.6.3.gz Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Jens Axboe <axboe@fb.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Eric Biggers authored
commit 6ae08069 upstream. pipe_write() would return 0 if it failed to merge the beginning of the data to write with the last, partially filled pipe buffer. It should return an error code instead. Userspace programs could be confused by write() returning 0 when called with a nonzero 'count'. The EFAULT error case was a regression from f0d1bec9 ("new helper: copy_page_from_iter()"), while the ops->confirm() error case was a much older bug. Test program: #include <assert.h> #include <errno.h> #include <unistd.h> int main(void) { int fd[2]; char data[1] = {0}; assert(0 == pipe(fd)); assert(1 == write(fd[1], data, 1)); /* prior to this patch, write() returned 0 here */ assert(-1 == write(fd[1], NULL, 1)); assert(errno == EFAULT); } Signed-off-by:
Eric Biggers <ebiggers3@gmail.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Maciej W. Rozycki authored
commit b582ef5c upstream. Do not clobber the buffer space passed from `search_binary_handler' and originally preloaded by `prepare_binprm' with the executable's file header by overwriting it with its interpreter's file header. Instead keep the buffer space intact and directly use the data structure locally allocated for the interpreter's file header, fixing a bug introduced in 2.1.14 with loadable module support (linux-mips.org commit beb11695 [Import of Linux/MIPS 2.1.14], predating kernel.org repo's history). Adjust the amount of data read from the interpreter's file accordingly. This was not an issue before loadable module support, because back then `load_elf_binary' was executed only once for a given ELF executable, whether the function succeeded or failed. With loadable module support supported and enabled, upon a failure of `load_elf_binary' -- which may for example be caused by architecture code rejecting an executable due to a missing hardware feature requested in the file header -- a module load is attempted and then the function reexecuted by `search_binary_handler'. With the executable's file header replaced with its interpreter's file header the executable can then be erroneously accepted in this subsequent attempt. Signed-off-by:
Maciej W. Rozycki <macro@imgtec.com> Signed-off-by:
-
Kinglong Mee authored
commit b130ed59 upstream. Only override netfs->primary_index when registering success. Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Kinglong Mee authored
commit 86108c2e upstream. If netfs exist, fscache should not increase the reference of parent's usage and n_children, otherwise, never be decreased. v2: thanks David's suggest, move increasing reference of parent if success use kmem_cache_free() freeing primary_index directly v3: don't move "netfs->primary_index->parent = &fscache_fsdef_index;" Signed-off-by:
-
Egbert Eich authored
commit 28fb4cb7 upstream. Due to a missing initialization there was no way to map fbdev memory. Thus for example using the Xserver with the fbdev driver failed. This fix adds initialization for fix.smem_start and fix.smem_len in the fb_info structure, which fixes this problem. Requested-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Egbert Eich <eich@suse.de> [pulled from SuSE tree by me - airlied] Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Jason Liu authored
commit 1cc8e345 upstream. There is an alignment mismatch issue between the of_reserved_mem and the CMA setup requirement. The of_reserved_mem will try to get the alignment value from the DTS and pass it to __memblock_alloc_base to do the memory block base allocation, but the alignment value specified in the DTS may not satisfy the CAM setup requirement since CMA setup required the alignment as the following in the code: align = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order); The sanity check in the function of rmem_cma_setup will fail if the alignment does not setup correctly and thus CMA will fail to setup. This patch is to fixup the alignment to meet the CMA setup required. Mailing-list-thread: https://lkml.org/lkml/2015/11/9/138Signed-off-by:
Jason Liu <r64343@freescale.com> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Paolo Bonzini authored
commit cbdb967a upstream. This is needed to avoid the possibility that the guest triggers an infinite stream of #DB exceptions (CVE-2015-8104). VMX is not affected: because it does not save DR6 in the VMCS, it already intercepts #DB unconditionally. Reported-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Eric Northup authored
commit 54a20552 upstream. It was found that a guest can DoS a host by triggering an infinite stream of "alignment check" (#AC) exceptions. This causes the microcode to enter an infinite loop where the core never receives another interrupt. The host kernel panics pretty quickly due to the effects (CVE-2015-5307). Signed-off-by:
Eric Northup <digitaleric@google.com> Signed-off-by:
-
Nadav Amit authored
commit c9cdd085 upstream. Defining XE, XM and VE vector numbers. Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
-
K. Y. Srinivasan authored
commit 8cf308e1 upstream. Don't set the SRB_FLAGS_QUEUE_ACTION_ENABLE flag since we are not specifying tags. Without this, the qlogic driver doesn't work properly with storvsc. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Hans de Goede authored
commit f71c882d upstream. Like some of the other Yoga models the Lenovo Yoga 900 does not have a hw rfkill switch, and trying to read the hw rfkill switch through the ideapad module causes it to always reported blocking breaking wifi. This commit adds the Lenovo Yoga 900 to the no_hw_rfkill dmi list, fixing the wifi breakage. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1275490Reported-and-tested-by:
Kevin Fenzi <kevin@scrye.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Filipe Manana authored
commit f1cd1f0b upstream. When listing a inode's xattrs we have a time window where we race against a concurrent operation for adding a new hard link for our inode that makes us not return any xattr to user space. In order for this to happen, the first xattr of our inode needs to be at slot 0 of a leaf and the previous leaf must still have room for an inode ref (or extref) item, and this can happen because an inode's listxattrs callback does not lock the inode's i_mutex (nor does the VFS does it for us), but adding a hard link to an inode makes the VFS lock the inode's i_mutex before calling the inode's link callback. If we have the following leafs: Leaf X (has N items) Leaf Y [ ... (257 INODE_ITEM 0) (257 INODE_REF 256) ] [ (257 XATTR_ITEM 12345), ... ] slot N - 2 slot N - 1 slot 0 The race illustrated by the following sequence diagram is possible: CPU 1 CPU 2 btrfs_listxattr() searches for key (257 XATTR_ITEM 0) gets path with path->nodes[0] == leaf X and path->slots[0] == N because path->slots[0] is >= btrfs_header_nritems(leaf X), it calls btrfs_next_leaf() btrfs_next_leaf() releases the path adds key (257 INODE_REF 666) to the end of leaf X (slot N), and leaf X now has N + 1 items searches for the key (257 INODE_REF 256), with path->keep_locks == 1, because that is the last key it saw in leaf X before releasing the path ends up at leaf X again and it verifies that the key (257 INODE_REF 256) is no longer the last key in leaf X, so it returns with path->nodes[0] == leaf X and path->slots[0] == N, pointing to the new item with key (257 INODE_REF 666) btrfs_listxattr's loop iteration sees that the type of the key pointed by the path is different from the type BTRFS_XATTR_ITEM_KEY and so it breaks the loop and stops looking for more xattr items --> the application doesn't get any xattr listed for our inode So fix this by breaking the loop only if the key's type is greater than BTRFS_XATTR_ITEM_KEY and skip the current key if its type is smaller. Signed-off-by:
Filipe Manana <fdmanana@suse.com> [ luis: backported to 3.16: - drop btrfs_key_type(), which was dropped upstream by 962a298f ("btrfs: kill the key type accessor helpers") ] Signed-off-by:
-
Peter Oberparleiter authored
commit 863e02d0 upstream. Writing a number to /sys/bus/scsi/devices/<sdev>/queue_ramp_up_period returns the value of that number instead of the number of bytes written. This behavior can confuse programs expecting POSIX write() semantics. Fix this by returning the number of bytes written instead. Signed-off-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Peter Zijlstra authored
commit b71b437e upstream. Arnaldo reported that tracepoint filters seem to misbehave (ie. not apply) on inherited events. The fix is obvious; filters are only set on the actual (parent) event, use the normal pattern of using this parent event for filters. This is safe because each child event has a reference to it. Reported-by:
Arnaldo Carvalho de Melo <acme@kernel.org> Tested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20151102095051.GN17308@twins.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Filipe Manana authored
commit 1d512cb7 upstream. If we are using the NO_HOLES feature, we have a tiny time window when running delalloc for a nodatacow inode where we can race with a concurrent link or xattr add operation leading to a BUG_ON. This happens because at run_delalloc_nocow() we end up casting a leaf item of type BTRFS_INODE_[REF|EXTREF]_KEY or of type BTRFS_XATTR_ITEM_KEY to a file extent item (struct btrfs_file_extent_item) and then analyse its extent type field, which won't match any of the expected extent types (values BTRFS_FILE_EXTENT_[REG|PREALLOC|INLINE]) and therefore trigger an explicit BUG_ON(1). The following sequence diagram shows how the race happens when running a no-cow dellaloc range [4K, 8K[ for inode 257 and we have the following neighbour leafs: Leaf X (has N items) Leaf Y [ ... (257 INODE_ITEM 0) (257 INODE_REF 256) ] [ (257 EXTENT_DATA 8192), ... ] slot N - 2 slot N - 1 slot 0 (Note the implicit hole for inode 257 regarding the [0, 8K[ range) CPU 1 CPU 2 run_dealloc_nocow() btrfs_lookup_file_extent() --> searches for a key with value (257 EXTENT_DATA 4096) in the fs/subvol tree --> returns us a path with path->nodes[0] == leaf X and path->slots[0] == N because path->slots[0] is >= btrfs_header_nritems(leaf X), it calls btrfs_next_leaf() btrfs_next_leaf() --> releases the path hard link added to our inode, with key (257 INODE_REF 500) added to the end of leaf X, so leaf X now has N + 1 keys --> searches for the key (257 INODE_REF 256), because it was the last key in leaf X before it released the path, with path->keep_locks set to 1 --> ends up at leaf X again and it verifies that the key (257 INODE_REF 256) is no longer the last key in the leaf, so it returns with path->nodes[0] == leaf X and path->slots[0] == N, pointing to the new item with key (257 INODE_REF 500) the loop iteration of run_dealloc_nocow() does not break out the loop and continues because the key referenced in the path at path->nodes[0] and path->slots[0] is for inode 257, its type is < BTRFS_EXTENT_DATA_KEY and its offset (500) is less then our delalloc range's end (8192) the item pointed by the path, an inode reference item, is (incorrectly) interpreted as a file extent item and we get an invalid extent type, leading to the BUG_ON(1): if (extent_type == BTRFS_FILE_EXTENT_REG || extent_type == BTRFS_FILE_EXTENT_PREALLOC) { (...) } else if (extent_type == BTRFS_FILE_EXTENT_INLINE) { (...) } else { BUG_ON(1) } The same can happen if a xattr is added concurrently and ends up having a key with an offset smaller then the delalloc's range end. So fix this by skipping keys with a type smaller than BTRFS_EXTENT_DATA_KEY. Signed-off-by:
-
Filipe Manana authored
commit aeafbf84 upstream. While running a stress test I got the following warning triggered: [191627.672810] ------------[ cut here ]------------ [191627.673949] WARNING: CPU: 8 PID: 8447 at fs/btrfs/file.c:779 __btrfs_drop_extents+0x391/0xa50 [btrfs]() (...) [191627.701485] Call Trace: [191627.702037] [<ffffffff8145f077>] dump_stack+0x4f/0x7b [191627.702992] [<ffffffff81095de5>] ? console_unlock+0x356/0x3a2 [191627.704091] [<ffffffff8104b3b0>] warn_slowpath_common+0xa1/0xbb [191627.705380] [<ffffffffa0664499>] ? __btrfs_drop_extents+0x391/0xa50 [btrfs] [191627.706637] [<ffffffff8104b46d>] warn_slowpath_null+0x1a/0x1c [191627.707789] [<ffffffffa0664499>] __btrfs_drop_extents+0x391/0xa50 [btrfs] [191627.709155] [<ffffffff8115663c>] ? cache_alloc_debugcheck_after.isra.32+0x171/0x1d0 [191627.712444] [<ffffffff81155007>] ? kmemleak_alloc_recursive.constprop.40+0x16/0x18 [191627.714162] [<ffffffffa06570c9>] insert_reserved_file_extent.constprop.40+0x83/0x24e [btrfs] [191627.715887] [<ffffffffa065422b>] ? start_transaction+0x3bb/0x610 [btrfs] [191627.717287] [<ffffffffa065b604>] btrfs_finish_ordered_io+0x273/0x4e2 [btrfs] [191627.728865] [<ffffffffa065b888>] finish_ordered_fn+0x15/0x17 [btrfs] [191627.730045] [<ffffffffa067d688>] normal_work_helper+0x14c/0x32c [btrfs] [191627.731256] [<ffffffffa067d96a>] btrfs_endio_write_helper+0x12/0x14 [btrfs] [191627.732661] [<ffffffff81061119>] process_one_work+0x24c/0x4ae [191627.733822] [<ffffffff810615b0>] worker_thread+0x206/0x2c2 [191627.734857] [<ffffffff810613aa>] ? process_scheduled_works+0x2f/0x2f [191627.736052] [<ffffffff810613aa>] ? process_scheduled_works+0x2f/0x2f [191627.737349] [<ffffffff810669a6>] kthread+0xef/0xf7 [191627.738267] [<ffffffff810f3b3a>] ? time_hardirqs_on+0x15/0x28 [191627.739330] [<ffffffff810668b7>] ? __kthread_parkme+0xad/0xad [191627.741976] [<ffffffff81465592>] ret_from_fork+0x42/0x70 [191627.743080] [<ffffffff810668b7>] ? __kthread_parkme+0xad/0xad [191627.744206] ---[ end trace bbfddacb7aaada8d ]--- $ cat -n fs/btrfs/file.c 691 int __btrfs_drop_extents(struct btrfs_trans_handle *trans, (...) 758 btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); 759 if (key.objectid > ino || 760 key.type > BTRFS_EXTENT_DATA_KEY || key.offset >= end) 761 break; 762 763 fi = btrfs_item_ptr(leaf, path->slots[0], 764 struct btrfs_file_extent_item); 765 extent_type = btrfs_file_extent_type(leaf, fi); 766 767 if (extent_type == BTRFS_FILE_EXTENT_REG || 768 extent_type == BTRFS_FILE_EXTENT_PREALLOC) { (...) 774 } else if (extent_type == BTRFS_FILE_EXTENT_INLINE) { (...) 778 } else { 779 WARN_ON(1); 780 extent_end = search_start; 781 } (...) This happened because the item we were processing did not match a file extent item (its key type != BTRFS_EXTENT_DATA_KEY), and even on this case we cast the item to a struct btrfs_file_extent_item pointer and then find a type field value that does not match any of the expected values (BTRFS_FILE_EXTENT_[REG|PREALLOC|INLINE]). This scenario happens due to a tiny time window where a race can happen as exemplified below. For example, consider the following scenario where we're using the NO_HOLES feature and we have the following two neighbour leafs: Leaf X (has N items) Leaf Y [ ... (257 INODE_ITEM 0) (257 INODE_REF 256) ] [ (257 EXTENT_DATA 8192), ... ] slot N - 2 slot N - 1 slot 0 Our inode 257 has an implicit hole in the range [0, 8K[ (implicit rather than explicit because NO_HOLES is enabled). Now if our inode has an ordered extent for the range [4K, 8K[ that is finishing, the following can happen: CPU 1 CPU 2 btrfs_finish_ordered_io() insert_reserved_file_extent() __btrfs_drop_extents() Searches for the key (257 EXTENT_DATA 4096) through btrfs_lookup_file_extent() Key not found and we get a path where path->nodes[0] == leaf X and path->slots[0] == N Because path->slots[0] is >= btrfs_header_nritems(leaf X), we call btrfs_next_leaf() btrfs_next_leaf() releases the path inserts key (257 INODE_REF 4096) at the end of leaf X, leaf X now has N + 1 keys, and the new key is at slot N btrfs_next_leaf() searches for key (257 INODE_REF 256), with path->keep_locks set to 1, because it was the last key it saw in leaf X finds it in leaf X again and notices it's no longer the last key of the leaf, so it returns 0 with path->nodes[0] == leaf X and path->slots[0] == N (which is now < btrfs_header_nritems(leaf X)), pointing to the new key (257 INODE_REF 4096) __btrfs_drop_extents() casts the item at path->nodes[0], slot path->slots[0], to a struct btrfs_file_extent_item - it does not skip keys for the target inode with a type less than BTRFS_EXTENT_DATA_KEY (BTRFS_INODE_REF_KEY < BTRFS_EXTENT_DATA_KEY) sees a bogus value for the type field triggering the WARN_ON in the trace shown above, and sets extent_end = search_start (4096) does the if-then-else logic to fixup 0 length extent items created by a past bug from hole punching: if (extent_end == key.offset && extent_end >= search_start) goto delete_extent_item; that evaluates to true and it ends up deleting the key pointed to by path->slots[0], (257 INODE_REF 4096), from leaf X The same could happen for example for a xattr that ends up having a key with an offset value that matches search_start (very unlikely but not impossible). So fix this by ensuring that keys smaller than BTRFS_EXTENT_DATA_KEY are skipped, never casted to struct btrfs_file_extent_item and never deleted by accident. Also protect against the unexpected case of getting a key for a lower inode number by skipping that key and issuing a warning. Signed-off-by:
-
Borislav Petkov authored
commit 04633df0 upstream. When we get loaded by a 64-bit bootloader, kernel entry point is startup_64 in head_64.S. We don't trust any and all bootloaders because some will fiddle with CPU configuration so we go ahead and massage each CPU into sanity again. For example, some dell BIOSes have this XD disable feature which set IA32_MISC_ENABLE[34] and disable NX. This might be some dumb workaround for other OSes but Linux sure doesn't need it. A similar thing is present in the Surface 3 firmware - see https://bugzilla.kernel.org/show_bug.cgi?id=106051 - which sets this bit only on the BSP: # rdmsr -a 0x1a0 400850089 850089 850089 850089 I know, right?! There's not even an off switch in there. So fix all those cases by sanitizing the 64-bit entry point too. For that, make verify_cpu() callable in 64-bit mode also. Requested-and-debugged-by:
"H. Peter Anvin" <hpa@zytor.com> Reported-and-tested-by:
Bastien Nocera <bugzilla@hadess.net> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1446739076-21303-1-git-send-email-bp@alien8.deSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Krzysztof Mazur authored
commit 68accac3 upstream. The commit f5f3497c extended the low identity mapping. However, if the kernel uses more than 2 GB (VMSPLIT_2G_OPT or VMSPLIT_1G memory split), the normal memory mapping is overwritten by the low identity mapping causing a crash. To avoid overwritting, limit the low identity map to cover only memory before kernel range (PAGE_OFFSET). Fixes: f5f3497c "x86/setup: Extend low identity map to cover whole kernel range Signed-off-by:
Krzysztof Mazur <krzysiek@podlesie.net> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lkml.kernel.org/r/1446815916-22105-1-git-send-email-krzysiek@podlesie.netSigned-off-by:
-
Paolo Bonzini authored
commit f5f3497c upstream. On 32-bit systems, the initial_page_table is reused by efi_call_phys_prolog as an identity map to call SetVirtualAddressMap. efi_call_phys_prolog takes care of converting the current CPU's GDT to a physical address too. For PAE kernels the identity mapping is achieved by aliasing the first PDPE for the kernel memory mapping into the first PDPE of initial_page_table. This makes the EFI stub's trick "just work". However, for non-PAE kernels there is no guarantee that the identity mapping in the initial_page_table extends as far as the GDT; in this case, accesses to the GDT will cause a page fault (which quickly becomes a triple fault). Fix this by copying the kernel mappings from swapper_pg_dir to initial_page_table twice, both at PAGE_OFFSET and at identity mapping. For some reason, this is only reproducible with QEMU's dynamic translation mode, and not for example with KVM. However, even under KVM one can clearly see that the page table is bogus: $ qemu-system-i386 -pflash OVMF.fd -M q35 vmlinuz0 -s -S -daemonize $ gdb (gdb) target remote localhost:1234 (gdb) hb *0x02858f6f Hardware assisted breakpoint 1 at 0x2858f6f (gdb) c Continuing. Breakpoint 1, 0x02858f6f in ?? () (gdb) monitor info registers ... GDT= 0724e000 000000ff IDT= fffbb000 000007ff CR0=0005003b CR2=ff896000 CR3=032b7000 CR4=00000690 ... The page directory is sane: (gdb) x/4wx 0x32b7000 0x32b7000: 0x03398063 0x03399063 0x0339a063 0x0339b063 (gdb) x/4wx 0x3398000 0x3398000: 0x00000163 0x00001163 0x00002163 0x00003163 (gdb) x/4wx 0x3399000 0x3399000: 0x00400003 0x00401003 0x00402003 0x00403003 but our particular page directory entry is empty: (gdb) x/1wx 0x32b7000 + (0x724e000 >> 22) * 4 0x32b7070: 0x00000000 [ It appears that you can skate past this issue if you don't receive any interrupts while the bogus GDT pointer is loaded, or if you avoid reloading the segment registers in general. Andy Lutomirski provides some additional insight: "AFAICT it's entirely permissible for the GDTR and/or LDT descriptor to point to unmapped memory. Any attempt to use them (segment loads, interrupts, IRET, etc) will try to access that memory as if the access came from CPL 0 and, if the access fails, will generate a valid page fault with CR2 pointing into the GDT or LDT." Up until commit 23a0d4e8 ("efi: Disable interrupts around EFI calls, not in the epilog/prolog calls") interrupts were disabled around the prolog and epilog calls, and the functional GDT was re-installed before interrupts were re-enabled. Which explains why no one has hit this issue until now. ] Signed-off-by:
Laszlo Ersek <lersek@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> [ Updated changelog. ] Signed-off-by:
-
Oleg Nesterov authored
commit 54708d28 upstream. The commit 96d0df79 ("proc: make proc_fd_permission() thread-friendly") fixed the access to /proc/self/fd from sub-threads, but introduced another problem: a sub-thread can't access /proc/<tid>/fd/ or /proc/thread-self/fd if generic_permission() fails. Change proc_fd_permission() to check same_thread_group(pid_task(), current). Fixes: 96d0df79 ("proc: make proc_fd_permission() thread-friendly") Reported-by:
"Jin, Yihua" <yihua.jin@intel.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Takashi Iwai authored
commit 60603950 upstream. Another Lifebook machine that needs the same quirk as other similar models to make the driver working. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=883192Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Catalin Marinas authored
commit d4322d88 upstream. On systems with a KMALLOC_MIN_SIZE of 128 (arm64, some mips and powerpc configurations defining ARCH_DMA_MINALIGN to 128), the first kmalloc_caches[] entry to be initialised after slab_early_init = 0 is "kmalloc-128" with index 7. Depending on the debug kernel configuration, sizeof(struct kmem_cache) can be larger than 128 resulting in an INDEX_NODE of 8. Commit 8fc9cf42 ("slab: make more slab management structure off the slab") enables off-slab management objects for sizes starting with PAGE_SIZE >> 5 (128 bytes for a 4KB page configuration) and the creation of the "kmalloc-128" cache would try to place the management objects off-slab. However, since KMALLOC_MIN_SIZE is already 128 and freelist_size == 32 in __kmem_cache_create(), kmalloc_slab(freelist_size) returns NULL (kmalloc_caches[7] not populated yet). This triggers the following bug on arm64: kernel BUG at /work/Linux/linux-2.6-aarch64/mm/slab.c:2283! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.3.0-rc4+ #540 Hardware name: Juno (DT) PC is at __kmem_cache_create+0x21c/0x280 LR is at __kmem_cache_create+0x210/0x280 [...] Call trace: __kmem_cache_create+0x21c/0x280 create_boot_cache+0x48/0x80 create_kmalloc_cache+0x50/0x88 create_kmalloc_caches+0x4c/0xf4 kmem_cache_init+0x100/0x118 start_kernel+0x214/0x33c This patch introduces an OFF_SLAB_MIN_SIZE definition to avoid off-slab management objects for sizes equal to or smaller than KMALLOC_MIN_SIZE. Fixes: 8fc9cf42 ("slab: make more slab management structure off the slab") Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Christoph Hellwig authored
commit 40998193 upstream. When dropping a lock while iterating a list we must restart the search as other threads could have manipulated the list under us. Without this we can get stuck in an endless loop. This bug was introduced by commit bc3f02a7 Author: Dan Williams <djbw@fb.com> Date: Tue Aug 28 22:12:10 2012 -0700 [SCSI] scsi_remove_target: fix softlockup regression on hot remove Which was itself trying to fix a reported soft lockup issue http://thread.gmane.org/gmane.linux.kernel/1348679 However, we believe even with this revert of the original patch, the soft lockup problem has been fixed by commit f2495e22 Author: James Bottomley <JBottomley@Parallels.com> Date: Tue Jan 21 07:01:41 2014 -0800 [SCSI] dual scan thread bug fix Thanks go to Dan Williams <dan.j.williams@intel.com> for tracking all this prior history down. Reported-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Christoph Hellwig <hch@lst.de> Tested-by:
-
Stefan Richter authored
commit 100ceb66 upstream. Reported by Clifford and Craig for JMicron OHCI-1394 + SDHCI combo controllers: Often or even most of the time, the controller is initialized with the message "added OHCI v1.10 device as card 0, 4 IR + 0 IT contexts, quirks 0x10". With 0 isochronous transmit DMA contexts (IT contexts), applications like audio output are impossible. However, OHCI-1394 demands that at least 4 IT contexts are implemented by the link layer controller, and indeed JMicron JMB38x do implement four of them. Only their IsoXmitIntMask register is unreliable at early access. With my own JMB381 single function controller I found: - I can reproduce the problem with a lower probability than Craig's. - If I put a loop around the section which clears and reads IsoXmitIntMask, then either the first or the second attempt will return the correct initial mask of 0x0000000f. I never encountered a case of needing more than a second attempt. - Consequently, if I put a dummy reg_read(...IsoXmitIntMaskSet) before the first write, the subsequent read will return the correct result. - If I merely ignore a wrong read result and force the known real result, later isochronous transmit DMA usage works just fine. So let's just fix this chip bug up by the latter method. Tested with JMB381 on kernel 3.13 and 4.3. Since OHCI-1394 generally requires 4 IT contexts at a minium, this workaround is simply applied whenever the initial read of IsoXmitIntMask returns 0, regardless whether it's a JMicron chip or not. I never heard of this issue together with any other chip though. I am not 100% sure that this fix works on the OHCI-1394 part of JMB380 and JMB388 combo controllers exactly the same as on the JMB381 single- function controller, but so far I haven't had a chance to let an owner of a combo chip run a patched kernel. Strangely enough, IsoRecvIntMask is always reported correctly, even though it is probed right before IsoXmitIntMask. Reported-by: Clifford Dunn Reported-by:
Craig Moore <craig.moore@qenos.com> Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Alexandra Yates authored
commit 5cf92c8b upstream. Adding Intel codename Lewisburg platform device IDs for audio. [rearranged the position by tiwai] Signed-off-by:
Alexandra Yates <alexandra.yates@linux.intel.com> Signed-off-by:
-
Takashi Iwai authored
commit c932b98c upstream. HP ProBook 6550b needs the same pin fixup applied to other HP B-series laptops with docks for making its headphone and dock headphone jacks working properly. We just need to add the codec SSID to the list. Bugzilla: https://bugzilla.kernel.org/attachment.cgi?id=191971Signed-off-by:
-
Krzysztof Kozlowski authored
commit 824ead03 upstream. During probe if the regulator could not be enabled, the error exit path would still disable it. This could lead to unbalanced counter of regulator enable/disable. The patch moves code for getting and enabling the regulator from exynos_map_dt_data() to probe function because it is really not a part of getting Device Tree properties. Acked-by:
Lukasz Majewski <l.majewski@samsung.com> Tested-by:
Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 5f09a5cb ("thermal: exynos: Disable the regulator on probe failure") Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Radim Krčmář authored
commit 656ec4a4 upstream. The comment in code had it mostly right, but we enable paging for emulated real mode regardless of EPT. Without EPT (which implies emulated real mode), secondary VCPUs won't start unless we disable SM[AE]P when the guest doesn't use paging. Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
libin authored
commit c84da8b9 upstream. In nop_mcount, shdr->sh_offset and welp->r_offset should handle endianness properly, otherwise it will trigger Segmentation fault if the recordmcount main and file.o have different endianness. Link: http://lkml.kernel.org/r/563806C7.7070606@huawei.comSigned-off-by:
Li Bin <huawei.libin@huawei.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Max Filippov authored
commit ab45fb14 upstream. There are multiple factors adding to the issue in different configurations: - commit 17290231 ("xtensa: add fixup for double exception raised in window overflow") added function window_overflow_restore_a0_fixup to double exception vector overlapping reset vector location of secondary processor cores. - on MMUv2 cores RESET_VECTOR1_VADDR may point to uncached kernel memory making code overlapping depend on cache type and size, so that without cache or with WT cache reset vector code overwrites double exception code, making issue even harder to detect. - on MMUv3 cores RESET_VECTOR1_VADDR may point to unmapped area, as MMUv3 cores change virtual address map to match MMUv2 layout, but reset vector virtual address is given for the original MMUv3 mapping. - physical memory region of the secondary reset vector is not reserved in the physical memory map, and thus may be allocated and overwritten at arbitrary moment. Fix it as follows: - move window_overflow_restore_a0_fixup code to .text section. - define RESET_VECTOR1_VADDR so that it points to reset vector in the cacheable MMUv2 map for cores with MMU. - reserve reset vector region in the physical memory map. Drop separate literal section and build mxhead.S with text section literals. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
