1. 04 Jul, 2017 6 commits
  2. 03 Jul, 2017 34 commits
    • Michal Kalderon's avatar
      qed: initialize ll2_syn_handle at start of function · 25f4535a
      Michal Kalderon authored
      Fix compilation warning
      qed_iwarp.c:1721:5: warning: ll2_syn_handle may be used
      uninitialized in this function
      Signed-off-by: default avatarMichal Kalderon <Michal.Kalderon@cavium.com>
      Signed-off-by: default avatarAriel Elior <Ariel.Elior@cavium.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      25f4535a
    • Daniel Axtens's avatar
      openvswitch: fix mis-ordered comment lines for ovs_skb_cb · 52427fa0
      Daniel Axtens authored
      I was trying to wrap my head around meaning of mru, and realised
      that the second line of the comment defining it had somehow
      ended up after the line defining cutlen, leading to much confusion.
      
      Reorder the lines to make sense.
      Signed-off-by: default avatarDaniel Axtens <dja@axtens.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      52427fa0
    • David S. Miller's avatar
      Merge tag 'wireless-drivers-next-for-davem-2017-07-03' of... · bcdb9e85
      David S. Miller authored
      Merge tag 'wireless-drivers-next-for-davem-2017-07-03' of https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
      
      Kalle Valo says:
      
      ====================
      wireless-drivers-next patches for 4.13
      
      Last minute changes to get new hardware and firmware support for
      iwlwifi and few other changes I was able to squeeze in. Also two
      patches for ieee80211.h and nl80211 as Johannes is away.
      
      Major changes:
      
      iwlwifi
      
      * some important fixes for 9000 HW
      
      * support for version 30 of the FW API for 8000 and 9000 series
      
      * a few new PCI IDs for 9000 series
      
      * reorganization of common files
      
      brcmfmac
      
      * support 4-way handshake offloading for WPA/WPA2-PSK and 802.1X
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bcdb9e85
    • David S. Miller's avatar
      Merge https://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 3a3f7d13
      David S. Miller authored
      Some overlapping changes in the mlx5 driver.
      
      A merge conflict resolution posted by Stephen Rothwell was used as a
      guide.
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3a3f7d13
    • Eric Dumazet's avatar
      net: make sk_ehashfn() static · 784c372a
      Eric Dumazet authored
      sk_ehashfn() is only used from a single file.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      784c372a
    • Eric Dumazet's avatar
      net: avoid one splat in fib_nl_delrule() · 5361e209
      Eric Dumazet authored
      We need to use refcount_set() on a newly created rule to avoid
      following error :
      
      [   64.601749] ------------[ cut here ]------------
      [   64.601757] WARNING: CPU: 0 PID: 6476 at lib/refcount.c:184 refcount_sub_and_test+0x75/0xa0
      [   64.601758] Modules linked in: w1_therm wire cdc_acm ehci_pci ehci_hcd mlx4_en ib_uverbs mlx4_ib ib_core mlx4_core
      [   64.601769] CPU: 0 PID: 6476 Comm: ip Tainted: G        W       4.12.0-smp-DEV #274
      [   64.601771] task: ffff8837bf482040 task.stack: ffff8837bdc08000
      [   64.601773] RIP: 0010:refcount_sub_and_test+0x75/0xa0
      [   64.601774] RSP: 0018:ffff8837bdc0f5c0 EFLAGS: 00010286
      [   64.601776] RAX: 0000000000000026 RBX: 0000000000000001 RCX: 0000000000000000
      [   64.601777] RDX: 0000000000000026 RSI: 0000000000000096 RDI: ffffed06f7b81eae
      [   64.601778] RBP: ffff8837bdc0f5d0 R08: 0000000000000004 R09: fffffbfff4a54c25
      [   64.601779] R10: 00000000cbc500e5 R11: ffffffffa52a6128 R12: ffff881febcf6f24
      [   64.601779] R13: ffff881fbf4eaf00 R14: ffff881febcf6f80 R15: ffff8837d7a4ed00
      [   64.601781] FS:  00007ff5a2f6b700(0000) GS:ffff881fff800000(0000) knlGS:0000000000000000
      [   64.601782] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [   64.601783] CR2: 00007ffcdc70d000 CR3: 0000001f9c91e000 CR4: 00000000001406f0
      [   64.601783] Call Trace:
      [   64.601786]  refcount_dec_and_test+0x11/0x20
      [   64.601790]  fib_nl_delrule+0xc39/0x1630
      [   64.601793]  ? is_bpf_text_address+0xe/0x20
      [   64.601795]  ? fib_nl_newrule+0x25e0/0x25e0
      [   64.601798]  ? depot_save_stack+0x133/0x470
      [   64.601801]  ? ns_capable+0x13/0x20
      [   64.601803]  ? __netlink_ns_capable+0xcc/0x100
      [   64.601806]  rtnetlink_rcv_msg+0x23a/0x6a0
      [   64.601808]  ? rtnl_newlink+0x1630/0x1630
      [   64.601811]  ? memset+0x31/0x40
      [   64.601813]  netlink_rcv_skb+0x2d7/0x440
      [   64.601815]  ? rtnl_newlink+0x1630/0x1630
      [   64.601816]  ? netlink_ack+0xaf0/0xaf0
      [   64.601818]  ? kasan_unpoison_shadow+0x35/0x50
      [   64.601820]  ? __kmalloc_node_track_caller+0x4c/0x70
      [   64.601821]  rtnetlink_rcv+0x28/0x30
      [   64.601823]  netlink_unicast+0x422/0x610
      [   64.601824]  ? netlink_attachskb+0x650/0x650
      [   64.601826]  netlink_sendmsg+0x7b7/0xb60
      [   64.601828]  ? netlink_unicast+0x610/0x610
      [   64.601830]  ? netlink_unicast+0x610/0x610
      [   64.601832]  sock_sendmsg+0xba/0xf0
      [   64.601834]  ___sys_sendmsg+0x6a9/0x8c0
      [   64.601835]  ? copy_msghdr_from_user+0x520/0x520
      [   64.601837]  ? __alloc_pages_nodemask+0x160/0x520
      [   64.601839]  ? memcg_write_event_control+0xd60/0xd60
      [   64.601841]  ? __alloc_pages_slowpath+0x1d50/0x1d50
      [   64.601843]  ? kasan_slab_free+0x71/0xc0
      [   64.601845]  ? mem_cgroup_commit_charge+0xb2/0x11d0
      [   64.601847]  ? lru_cache_add_active_or_unevictable+0x7d/0x1a0
      [   64.601849]  ? __handle_mm_fault+0x1af8/0x2810
      [   64.601851]  ? may_open_dev+0xc0/0xc0
      [   64.601852]  ? __pmd_alloc+0x2c0/0x2c0
      [   64.601853]  ? __fdget+0x13/0x20
      [   64.601855]  __sys_sendmsg+0xc6/0x150
      [   64.601856]  ? __sys_sendmsg+0xc6/0x150
      [   64.601857]  ? SyS_shutdown+0x170/0x170
      [   64.601859]  ? handle_mm_fault+0x28a/0x650
      [   64.601861]  SyS_sendmsg+0x12/0x20
      [   64.601863]  entry_SYSCALL_64_fastpath+0x13/0x94
      
      Fixes: 717d1e99 ("net: convert fib_rule.refcnt from atomic_t to refcount_t")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5361e209
    • Zhu Yanjun's avatar
      mlx4_en: make mlx4_log_num_mgm_entry_size static · 3b68067b
      Zhu Yanjun authored
      The variable mlx4_log_num_mgm_entry_size is only called in main.c.
      
      CC: Joe Jin <joe.jin@oracle.com>
      CC: Junxiao Bi <junxiao.bi@oracle.com>
      Signed-off-by: default avatarZhu Yanjun <yanjun.zhu@oracle.com>
      Reviewed-by: default avatarYuval Shaia <yuval.shaia@oracle.com>
      Reviewed-by: default avatarLeon Romanovsky <leonro@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3b68067b
    • Alban Browaeys's avatar
      net: core: Fix slab-out-of-bounds in netdev_stats_to_stats64 · 9af9959e
      Alban Browaeys authored
      commit 9256645a ("net/core: relax BUILD_BUG_ON in
      netdev_stats_to_stats64") made an attempt to read beyond
      the size of the source a possibility.
      
      Fix to only copy src size to dest. As dest might be bigger than src.
      
       ==================================================================
       BUG: KASAN: slab-out-of-bounds in netdev_stats_to_stats64+0xe/0x30 at addr ffff8801be248b20
       Read of size 192 by task VBoxNetAdpCtl/6734
       CPU: 1 PID: 6734 Comm: VBoxNetAdpCtl Tainted: G           O    4.11.4prahal+intel+ #118
       Hardware name: LENOVO 20CDCTO1WW/20CDCTO1WW, BIOS GQET52WW (1.32 ) 05/04/2017
       Call Trace:
        dump_stack+0x63/0x86
        kasan_object_err+0x1c/0x70
        kasan_report+0x270/0x520
        ? netdev_stats_to_stats64+0xe/0x30
        ? sched_clock_cpu+0x1b/0x190
        ? __module_address+0x3e/0x3b0
        ? unwind_next_frame+0x1ea/0xb00
        check_memory_region+0x13c/0x1a0
        memcpy+0x23/0x50
        netdev_stats_to_stats64+0xe/0x30
        dev_get_stats+0x1b9/0x230
        rtnl_fill_stats+0x44/0xc00
        ? nla_put+0xc6/0x130
        rtnl_fill_ifinfo+0xe9e/0x3700
        ? rtnl_fill_vfinfo+0xde0/0xde0
        ? sched_clock+0x9/0x10
        ? sched_clock+0x9/0x10
        ? sched_clock_local+0x120/0x130
        ? __module_address+0x3e/0x3b0
        ? unwind_next_frame+0x1ea/0xb00
        ? sched_clock+0x9/0x10
        ? sched_clock+0x9/0x10
        ? sched_clock_cpu+0x1b/0x190
        ? VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp]
        ? depot_save_stack+0x1d8/0x4a0
        ? depot_save_stack+0x34f/0x4a0
        ? depot_save_stack+0x34f/0x4a0
        ? save_stack+0xb1/0xd0
        ? save_stack_trace+0x16/0x20
        ? save_stack+0x46/0xd0
        ? kasan_slab_alloc+0x12/0x20
        ? __kmalloc_node_track_caller+0x10d/0x350
        ? __kmalloc_reserve.isra.36+0x2c/0xc0
        ? __alloc_skb+0xd0/0x560
        ? rtmsg_ifinfo_build_skb+0x61/0x120
        ? rtmsg_ifinfo.part.25+0x16/0xb0
        ? rtmsg_ifinfo+0x47/0x70
        ? register_netdev+0x15/0x30
        ? vboxNetAdpOsCreate+0xc0/0x1c0 [vboxnetadp]
        ? vboxNetAdpCreate+0x210/0x400 [vboxnetadp]
        ? VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp]
        ? do_vfs_ioctl+0x17f/0xff0
        ? SyS_ioctl+0x74/0x80
        ? do_syscall_64+0x182/0x390
        ? __alloc_skb+0xd0/0x560
        ? __alloc_skb+0xd0/0x560
        ? save_stack_trace+0x16/0x20
        ? init_object+0x64/0xa0
        ? ___slab_alloc+0x1ae/0x5c0
        ? ___slab_alloc+0x1ae/0x5c0
        ? __alloc_skb+0xd0/0x560
        ? sched_clock+0x9/0x10
        ? kasan_unpoison_shadow+0x35/0x50
        ? kasan_kmalloc+0xad/0xe0
        ? __kmalloc_node_track_caller+0x246/0x350
        ? __alloc_skb+0xd0/0x560
        ? kasan_unpoison_shadow+0x35/0x50
        ? memset+0x31/0x40
        ? __alloc_skb+0x31f/0x560
        ? napi_consume_skb+0x320/0x320
        ? br_get_link_af_size_filtered+0xb7/0x120 [bridge]
        ? if_nlmsg_size+0x440/0x630
        rtmsg_ifinfo_build_skb+0x83/0x120
        rtmsg_ifinfo.part.25+0x16/0xb0
        rtmsg_ifinfo+0x47/0x70
        register_netdevice+0xa2b/0xe50
        ? __kmalloc+0x171/0x2d0
        ? netdev_change_features+0x80/0x80
        register_netdev+0x15/0x30
        vboxNetAdpOsCreate+0xc0/0x1c0 [vboxnetadp]
        vboxNetAdpCreate+0x210/0x400 [vboxnetadp]
        ? vboxNetAdpComposeMACAddress+0x1d0/0x1d0 [vboxnetadp]
        ? kasan_check_write+0x14/0x20
        VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp]
        ? VBoxNetAdpLinuxOpen+0x20/0x20 [vboxnetadp]
        ? lock_acquire+0x11c/0x270
        ? __audit_syscall_entry+0x2fb/0x660
        do_vfs_ioctl+0x17f/0xff0
        ? __audit_syscall_entry+0x2fb/0x660
        ? ioctl_preallocate+0x1d0/0x1d0
        ? __audit_syscall_entry+0x2fb/0x660
        ? kmem_cache_free+0xb2/0x250
        ? syscall_trace_enter+0x537/0xd00
        ? exit_to_usermode_loop+0x100/0x100
        SyS_ioctl+0x74/0x80
        ? do_sys_open+0x350/0x350
        ? do_vfs_ioctl+0xff0/0xff0
        do_syscall_64+0x182/0x390
        entry_SYSCALL64_slow_path+0x25/0x25
       RIP: 0033:0x7f7e39a1ae07
       RSP: 002b:00007ffc6f04c6d8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
       RAX: ffffffffffffffda RBX: 00007ffc6f04c730 RCX: 00007f7e39a1ae07
       RDX: 00007ffc6f04c730 RSI: 00000000c0207601 RDI: 0000000000000007
       RBP: 00007ffc6f04c700 R08: 00007ffc6f04c780 R09: 0000000000000008
       R10: 0000000000000541 R11: 0000000000000206 R12: 0000000000000007
       R13: 00000000c0207601 R14: 00007ffc6f04c730 R15: 0000000000000012
       Object at ffff8801be248008, in cache kmalloc-4096 size: 4096
       Allocated:
       PID = 6734
        save_stack_trace+0x16/0x20
        save_stack+0x46/0xd0
        kasan_kmalloc+0xad/0xe0
        __kmalloc+0x171/0x2d0
        alloc_netdev_mqs+0x8a7/0xbe0
        vboxNetAdpOsCreate+0x65/0x1c0 [vboxnetadp]
        vboxNetAdpCreate+0x210/0x400 [vboxnetadp]
        VBoxNetAdpLinuxIOCtlUnlocked+0x14b/0x280 [vboxnetadp]
        do_vfs_ioctl+0x17f/0xff0
        SyS_ioctl+0x74/0x80
        do_syscall_64+0x182/0x390
        return_from_SYSCALL_64+0x0/0x6a
       Freed:
       PID = 5600
        save_stack_trace+0x16/0x20
        save_stack+0x46/0xd0
        kasan_slab_free+0x73/0xc0
        kfree+0xe4/0x220
        kvfree+0x25/0x30
        single_release+0x74/0xb0
        __fput+0x265/0x6b0
        ____fput+0x9/0x10
        task_work_run+0xd5/0x150
        exit_to_usermode_loop+0xe2/0x100
        do_syscall_64+0x26c/0x390
        return_from_SYSCALL_64+0x0/0x6a
       Memory state around the buggy address:
        ffff8801be248a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
        ffff8801be248b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
       >ffff8801be248b80: 00 00 00 00 00 00 00 00 00 00 00 07 fc fc fc fc
                                                           ^
        ffff8801be248c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
        ffff8801be248c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
       ==================================================================
      Signed-off-by: default avatarAlban Browaeys <alban.browaeys@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9af9959e
    • Christos Gkekas's avatar
      netxen_nic: Remove unused pointer hdr in netxen_setup_minidump() · 5614fd84
      Christos Gkekas authored
      Pointer hdr in netxen_setup_minidump() is set but never used, thus
      should be removed.
      Signed-off-by: default avatarChristos Gkekas <chris.gekas@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5614fd84
    • David S. Miller's avatar
      Merge branch 'vxlan-geneve-fix-hlist-corruption' · 4b821cb2
      David S. Miller authored
      Jiri Benc says:
      
      ====================
      vxlan, geneve: fix hlist corruption
      
      Fix memory corruption introduced with the support of both IPv4 and IPv6
      sockets in a single device. The same bug is present in VXLAN and Geneve.
      ====================
      Signed-off-by: default avatarJiri Benc <jbenc@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4b821cb2
    • Jiri Benc's avatar
      geneve: fix hlist corruption · 4b4c21fa
      Jiri Benc authored
      It's not a good idea to add the same hlist_node to two different hash lists.
      This leads to various hard to debug memory corruptions.
      
      Fixes: 8ed66f0e ("geneve: implement support for IPv6-based tunnels")
      Cc: John W. Linville <linville@tuxdriver.com>
      Signed-off-by: default avatarJiri Benc <jbenc@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4b4c21fa
    • Jiri Benc's avatar
      vxlan: fix hlist corruption · 69e76661
      Jiri Benc authored
      It's not a good idea to add the same hlist_node to two different hash lists.
      This leads to various hard to debug memory corruptions.
      
      Fixes: b1be00a6 ("vxlan: support both IPv4 and IPv6 sockets in a single vxlan device")
      Signed-off-by: default avatarJiri Benc <jbenc@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      69e76661
    • Or Gerlitz's avatar
      net/mlxfw: Properly handle dependancy with non-loadable mlx5 · c1c1d86b
      Or Gerlitz authored
      If mlx5 is set to be built-in and mlxfw as a module, we
      get a link error:
      
      drivers/built-in.o: In function `mlx5_firmware_flash':
      (.text+0x5aed72): undefined reference to `mlxfw_firmware_flash'
      
      Since we don't want to mandate selecting mlxfw for mlx5 users, we
      use the IS_REACHABLE macro to make sure that a stub is exposed
      to the caller.
      Signed-off-by: default avatarOr Gerlitz <ogerlitz@mellanox.com>
      Reported-by: default avatarJakub Kicinski <kubakici@wp.pl>
      Reported-by: default avatarArnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c1c1d86b
    • David S. Miller's avatar
    • David S. Miller's avatar
    • David S. Miller's avatar
      Merge branch 'bpf-misc-helper-verifier-improvements' · 63d7c880
      David S. Miller authored
      Daniel Borkmann says:
      
      ====================
      Misc BPF helper/verifier improvements
      
      Miscellanous improvements I still had in my queue, it adds a new
      bpf_skb_adjust_room() helper for cls_bpf, exports to fdinfo whether
      tail call array owner is JITed, so iproute2 error reporting can be
      improved on that regard, a small cleanup and extension to trace
      printk, two verifier patches, one to make the code around narrower
      ctx access a bit more straight forward and one to allow for imm += x
      operations, that we've seen LLVM generating and the verifier currently
      rejecting. We've included the patch 6 given it's rather small and
      we ran into it from LLVM side, it would be great if it could be
      queued for stable as well after the merge window. Last but not least,
      test cases are added also related to imm alu improvement.
      
      Thanks a lot!
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      63d7c880
    • Daniel Borkmann's avatar
      bpf: add various test cases for verifier selftest · 6d191ed4
      Daniel Borkmann authored
      Add couple of verifier test cases for x|imm += pkt_ptr, including the
      imm += x extension.
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6d191ed4
    • John Fastabend's avatar
      bpf, verifier: add additional patterns to evaluate_reg_imm_alu · 43188702
      John Fastabend authored
      Currently the verifier does not track imm across alu operations when
      the source register is of unknown type. This adds additional pattern
      matching to catch this and track imm. We've seen LLVM generating this
      pattern while working on cilium.
      Signed-off-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
      Acked-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      43188702
    • John Fastabend's avatar
      bpf: extend bpf_trace_printk to support %i · 7bda4b40
      John Fastabend authored
      Currently, bpf_trace_printk does not support common formatting
      symbol '%i' however vsprintf does and is what eventually gets
      called by bpf helper. If users are used to '%i' and currently
      make use of it, then bpf_trace_printk will just return with
      error without dumping anything to the trace pipe, so just add
      support for '%i' to the helper.
      Signed-off-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
      Acked-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7bda4b40
    • Daniel Borkmann's avatar
      bpf: export whether tail call has jited owner · 9780c0ab
      Daniel Borkmann authored
      We do export through fdinfo already whether a prog is JITed or not,
      given a program load can fail in case of either prog or tail call map
      has JITed property, but neither both are JITed or not JITed, we can
      facilitate error reporting in loaders like iproute2 through exporting
      owner_jited of tail call map. We already do export owner_prog_type
      through this facility, so parser can pick up both for comparison.
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9780c0ab
    • Daniel Borkmann's avatar
      bpf: simplify narrower ctx access · f96da094
      Daniel Borkmann authored
      This work tries to make the semantics and code around the
      narrower ctx access a bit easier to follow. Right now
      everything is done inside the .is_valid_access(). Offset
      matching is done differently for read/write types, meaning
      writes don't support narrower access and thus matching only
      on offsetof(struct foo, bar) is enough whereas for read
      case that supports narrower access we must check for
      offsetof(struct foo, bar) + offsetof(struct foo, bar) +
      sizeof(<bar>) - 1 for each of the cases. For read cases of
      individual members that don't support narrower access (like
      packet pointers or skb->cb[] case which has its own narrow
      access logic), we check as usual only offsetof(struct foo,
      bar) like in write case. Then, for the case where narrower
      access is allowed, we also need to set the aux info for the
      access. Meaning, ctx_field_size and converted_op_size have
      to be set. First is the original field size e.g. sizeof(<bar>)
      as in above example from the user facing ctx, and latter
      one is the target size after actual rewrite happened, thus
      for the kernel facing ctx. Also here we need the range match
      and we need to keep track changing convert_ctx_access() and
      converted_op_size from is_valid_access() as both are not at
      the same location.
      
      We can simplify the code a bit: check_ctx_access() becomes
      simpler in that we only store ctx_field_size as a meta data
      and later in convert_ctx_accesses() we fetch the target_size
      right from the location where we do convert. Should the verifier
      be misconfigured we do reject for BPF_WRITE cases or target_size
      that are not provided. For the subsystems, we always work on
      ranges in is_valid_access() and add small helpers for ranges
      and narrow access, convert_ctx_accesses() sets target_size
      for the relevant instruction.
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
      Cc: Yonghong Song <yhs@fb.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f96da094
    • Daniel Borkmann's avatar
      bpf: add bpf_skb_adjust_room helper · 2be7e212
      Daniel Borkmann authored
      This work adds a helper that can be used to adjust net room of an
      skb. The helper is generic and can be further extended in future.
      Main use case is for having a programmatic way to add/remove room to
      v4/v6 header options along with cls_bpf on egress and ingress hook
      of the data path. It reuses most of the infrastructure that we added
      for the bpf_skb_change_type() helper which can be used in nat64
      translations. Similarly, the helper only takes care of adjusting the
      room so that related data is populated and csum adapted out of the
      BPF program using it.
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2be7e212
    • Daniel Borkmann's avatar
      bpf, net: add skb_mac_header_len helper · 0daf4349
      Daniel Borkmann authored
      Add a small skb_mac_header_len() helper similarly as the
      skb_network_header_len() we have and replace open coded
      places in BPF's bpf_skb_change_proto() helper. Will also
      be used in upcoming work.
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0daf4349
    • Tore Anderson's avatar
      net: cdc_mbim: apply "NDP to end" quirk to HP lt4132 · a68491f8
      Tore Anderson authored
      The HP lt4132 LTE/HSPA+ 4G Module (03f0:a31d) is a rebranded Huawei
      ME906s-158 device. It, like the ME906s-158, requires the "NDP to end"
      quirk for correct operation.
      Signed-off-by: default avatarTore Anderson <tore@fud.no>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a68491f8
    • Matteo Croce's avatar
      Documentation: fix wrong example command · 75674c4c
      Matteo Croce authored
      In the IPVLAN documentation there is an example command line where the
      master and slave interface names are inverted.
      Fix the command line and also add the optional `name' keyword to better
      describe what the command is doing.
      
      v2: added commit message
      Signed-off-by: default avatarMatteo Croce <mcroce@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      75674c4c
    • Sabrina Dubroca's avatar
      vxlan: correctly set vxlan->net when creating the device in a netns · 889ce937
      Sabrina Dubroca authored
      Commit a985343b ("vxlan: refactor verification and application of
      configuration") modified vxlan device creation, and replaced the
      assignment of vxlan->net to src_net with dev_net(netdev) in ->setup().
      
      But dev_net(netdev) is not the same as src_net. At the time ->setup()
      is called, dev_net hasn't been set yet, so we end up creating the
      socket for the vxlan device in init_net.
      
      Fix this by bringing back the assignment of vxlan->net during device
      creation.
      
      Fixes: a985343b ("vxlan: refactor verification and application of configuration")
      Signed-off-by: default avatarSabrina Dubroca <sd@queasysnail.net>
      Reviewed-by: default avatarMatthias Schiffer <mschiffer@universe-factory.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      889ce937
    • David S. Miller's avatar
      Merge branch 'hns-phy-loopback' · c3b99db8
      David S. Miller authored
      Lin Yun Sheng says:
      
      ====================
      Add loopback support in phy_driver and hns ethtool fix
      
      This Patch Set add set_loopback in phy_driver and use it to setup loopback
      when doing ethtool phy self_test.
      
      Patch V8:
      	Respin the Patch based on net-next
      
      Patch V7:
      	1. Add comment why resume the phy in hns_nic_config_phy_loopback.
      	2. Fix a typo error in patch description.
      
      Patch V6:
      	Fix Or'ing error code in __lb_setup.
      
      Patch V5:
      	Removing non loopback related code change.
      
      Patch V4:
      	1. Remove c45 checking
      	2. Add -ENOTSUPP when function pointer is null,
      	   take mutex in phy_loopback.
      
      Patch V3:
      	Calling phy_loopback enable and disable in pair in hns mac driver.
      
      Patch V2:
      	1. Add phy_loopback in phy_device.c.
      	2. Do error checking and do the read and write once in
      	   genphy_loopback.
      	3. Remove gen10g_loopback in phy_device.c.
      
      Patch V1:
      	Initial Submit
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c3b99db8
    • Lin Yun Sheng's avatar
      net: hns: Use phy_driver to setup Phy loopback · 67cd9a99
      Lin Yun Sheng authored
      Use function set_loopback in phy_driver to setup phy loopback
      when doing ethtool self test.
      Signed-off-by: default avatarLin Yun Sheng <linyunsheng@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      67cd9a99
    • Lin Yun Sheng's avatar
      net: phy: Add phy loopback support in net phy framework · f0f9b4ed
      Lin Yun Sheng authored
      This patch add set_loopback in phy_driver, which is used by MAC
      driver to enable or disable phy loopback. it also add a generic
      genphy_loopback function, which use BMCR loopback bit to enable
      or disable loopback.
      Signed-off-by: default avatarLin Yun Sheng <linyunsheng@huawei.com>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f0f9b4ed
    • Stephen Rothwell's avatar
      6992c6c5
    • Sabrina Dubroca's avatar
      ipv6: dad: don't remove dynamic addresses if link is down · ec8add2a
      Sabrina Dubroca authored
      Currently, when the link for $DEV is down, this command succeeds but the
      address is removed immediately by DAD (1):
      
          ip addr add 1111::12/64 dev $DEV valid_lft 3600 preferred_lft 1800
      
      In the same situation, this will succeed and not remove the address (2):
      
          ip addr add 1111::12/64 dev $DEV
          ip addr change 1111::12/64 dev $DEV valid_lft 3600 preferred_lft 1800
      
      The comment in addrconf_dad_begin() when !IF_READY makes it look like
      this is the intended behavior, but doesn't explain why:
      
           * If the device is not ready:
           * - keep it tentative if it is a permanent address.
           * - otherwise, kill it.
      
      We clearly cannot prevent userspace from doing (2), but we can make (1)
      work consistently with (2).
      
      addrconf_dad_stop() is only called in two cases: if DAD failed, or to
      skip DAD when the link is down. In that second case, the fix is to avoid
      deleting the address, like we already do for permanent addresses.
      
      Fixes: 3c21edbd ("[IPV6]: Defer IPv6 device initialization until the link becomes ready.")
      Signed-off-by: default avatarSabrina Dubroca <sd@queasysnail.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ec8add2a
    • Jim Baxter's avatar
      net: cdc_ncm: Reduce memory use when kernel memory low · e1069bbf
      Jim Baxter authored
      The CDC-NCM driver can require large amounts of memory to create
      skb's and this can be a problem when the memory becomes fragmented.
      
      This especially affects embedded systems that have constrained
      resources but wish to maximise the throughput of CDC-NCM with 16KiB
      NTB's.
      
      The issue is after running for a while the kernel memory can become
      fragmented and it needs compacting.
      If the NTB allocation is needed before the memory has been compacted
      the atomic allocation can fail which can cause increased latency,
      large re-transmissions or disconnections depending upon the data
      being transmitted at the time.
      This situation occurs for less than a second until the kernel has
      compacted the memory but the failed devices can take a lot longer to
      recover from the failed TX packets.
      
      To ease this temporary situation I modified the CDC-NCM TX path to
      temporarily switch into a reduced memory mode which allocates an NTB
      that will fit into a USB_CDC_NCM_NTB_MIN_OUT_SIZE (default 2048 Bytes)
      sized memory block and only transmit NTB's with a single network frame
      until the memory situation is resolved.
      Each time this issue occurs we wait for an increasing number of
      reduced size allocations before requesting a full size one to not
      put additional pressure on a low memory system.
      
      Once the memory is compacted the CDC-NCM data can resume transmitting
      at the normal tx_max rate once again.
      Signed-off-by: default avatarJim Baxter <jim_baxter@mentor.com>
      Reviewed-by: default avatarBjørn Mork <bjorn@mork.no>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e1069bbf
    • David S. Miller's avatar
      Merge branch 'qed-Add-iWARP-support-for-QL4xxxx' · 2da95be9
      David S. Miller authored
      Michal Kalderon says:
      
      ====================
      qed: Add iWARP support for QL4xxxx
      
      This patch series adds iWARP support to our QL4xxxx networking adapters.
      The code changes span across qed and qedr drivers, but this series contains
      changes to qed only. Once the series is accepted, the qedr series will
      be submitted to the rdma tree.
      There is one additional qed patch which enables the iWARP, this patch is
      delayed until the qedr series will be accepted.
      
      The patches were previously sent as an RFC, and these are the first 12
      patches in the RFC series:
      https://www.spinics.net/lists/linux-rdma/msg51416.html
      
      This series was tested and built against net-next.
      
      MAINTAINERS file is not updated in this PATCH as there is a pending patch
      for qedr driver update https://patchwork.kernel.org/patch/9752761.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2da95be9
    • Kalderon, Michal's avatar
      qed: Add iWARP support for physical queue allocation · 93c45984
      Kalderon, Michal authored
      iWARP has different physical queue requirements than RoCE
      Signed-off-by: default avatarMichal Kalderon <Michal.Kalderon@cavium.com>
      Signed-off-by: default avatarYuval Mintz <Yuval.Mintz@cavium.com>
      Signed-off-by: default avatarAriel Elior <Ariel.Elior@cavium.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      93c45984