- 15 May, 2021 23 commits
-
-
Samuel Holland authored
Currently, all command packet structs used by this driver are packed. However, only one (TW_SG_Entry) actually needs to be packed, because it uses 64-bit addresses at 32-bit alignment. To improve the quality of generated code, stop packing all of the other command packet structs. This requires adjusting the type of one misaligned "reserved" member. After this change, pahole reports that only one type had its layout change: the tw_compat_info member of TW_Device_Extension is now naturally aligned. Link: https://lore.kernel.org/r/20210427235915.39211-3-samuel@sholland.orgSigned-off-by:
Samuel Holland <samuel@sholland.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Samuel Holland authored
In preparation for removing the "#pragma pack(1)" from the driver, fix all instances where a trailing array member could be replaced by a flexible array member. Since a flexible array member has zero size, it introduces no padding, whether or not the struct is packed. Link: https://lore.kernel.org/r/20210427235915.39211-2-samuel@sholland.orgSigned-off-by:
-
Nigel Christian authored
The nested for loop variables i and j in beiscsi_free_mem() are initialized twice. The values outside of the loops are redundant and can be removed. Addresses-Coverity: ("Unused value") Link: https://lore.kernel.org/r/YJ2mMHNqAgTNVVj+@fedoraSigned-off-by:Nigel Christian <nigel.l.christian@gmail.com> Signed-off-by:
-
Keoseong Park authored
Remove unnecessary parenthesis in ufshcd_is_wb_flags() and ufshcd_is_wbattrs(). Link: https://lore.kernel.org/r/1891546521.01620896402035.JavaMail.epsvc@epcpadp3Signed-off-by:
Keoseong Park <keosung.park@samsung.com> Signed-off-by:
-
Bart Van Assche authored
Remove these macros to make the UFS driver source code easier to read. These macros were introduced by commit 57d104c1 ("ufs: add UFS power management support"). Link: https://lore.kernel.org/r/20210513171229.7439-1-bvanassche@acm.org Cc: Can Guo <cang@codeaurora.org> Cc: Alim Akhtar <alim.akhtar@samsung.com> Cc: Avri Altman <avri.altman@wdc.com> Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Bean Huo <beanhuo@micron.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Acked-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Christophe JAILLET authored
'lp' is unused, it is just declared and zeroed Remove it. Link: https://lore.kernel.org/r/d10ccee35e35bf33d651f2e0163034d7c451520b.1618944442.git.christophe.jaillet@wanadoo.frSigned-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Konstantin Shelekhin authored
Extend the standard INQUIRY data to 96 bytes and fill in the VERSION DESCRIPTOR fields. The layout follows SPC-4: - SCSI architecture standard - SCSI transport protocol standard - SCSI primary command set standard - SCSI device type command set standard All version descriptor values are defined as "no version claimed" because some initiators fail to recognize anything else. [mkp: whitespace] Link: https://lore.kernel.org/r/20210513192804.1252142-3-k.shelekhin@yadro.comReviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by:
Konstantin Shelekhin <k.shelekhin@yadro.com> Signed-off-by:
-
Konstantin Shelekhin authored
Bump the SCSI primary command set standard to SPC-4. The upcoming version descriptors will report newer SCSI standards (like SBC-3) that are not defined in SPC-3. Link: https://lore.kernel.org/r/20210513192804.1252142-2-k.shelekhin@yadro.comReviewed-by:
-
Sergey Samoylenko authored
Implement an attribute which provides a way to set a company specific WWN in configfs via: target/core/$backstore/$name/wwn/company_id The Open Fabrics Alliance ID 001405h remains the default. Link: https://lore.kernel.org/r/20210420185920.42431-3-s.samoylenko@yadro.comSigned-off-by:
Sergey Samoylenko <s.samoylenko@yadro.com> Signed-off-by:
-
Sergey Samoylenko authored
Both the INQUIRY handling and the XCOPY implementation provide functions to generate an NAA designator. In addition, these functions are poorly named: - spc_parse_naa_6h_vendor_specific() - target_xcopy_gen_naa_ieee() Introduce a common NAA 6 designator generation function, spc_gen_naa_6h_vendor_specific(). Link: https://lore.kernel.org/r/20210420185920.42431-2-s.samoylenko@yadro.comSigned-off-by:
-
Jiapeng Chong authored
Variable pg_size is set to '0x100 << pg_size', but this value is never read and it is not used later on. Hence it is a redundant assignment and can be removed. Clean up the following clang-analyzer warning: drivers/target/sbp/sbp_target.c:1264:3: warning: Value stored to 'pg_size' is never read [clang-analyzer-deadcode.DeadStores]. Link: https://lore.kernel.org/r/1620902977-57076-1-git-send-email-jiapeng.chong@linux.alibaba.comReported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Jiapeng Chong authored
Variable rc is set to '-1', but this value is never read as it is overwritten later. Hence it is a redundant assignment and can be removed. Clean up the following clang-analyzer warning: drivers/message/fusion/mptbase.c:6996:2: warning: Value stored to 'rc' is never read [clang-analyzer-deadcode.DeadStores]. Link: https://lore.kernel.org/r/1620814327-25427-1-git-send-email-jiapeng.chong@linux.alibaba.comReported-by:
-
Brian King authored
If rport target discovery commands fail for some reason, they get retried up to a set number of retries. Once the retry limit is exceeded, the target is deleted. In order to delete the target, we either need to do an implicit logout or a move login. In the move login case, if the move login fails, we want to retry it. This ensures the retry counter gets reinitialized so the move login will get retried. Link: https://lore.kernel.org/r/1620756740-7045-4-git-send-email-brking@linux.vnet.ibm.comSigned-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Brian King authored
If fast fail is enabled and we encounter a WWPN moving from one port id to another port id with I/O outstanding, if we use the move login MAD, although it will work, it will leave any outstanding I/O still outstanding to the old port id. Eventually, the SCSI command timers will fire and we will abort these commands, however, this is generally much longer than the fast fail timeout, which can lead to I/O operations being outstanding for a long time. This patch changes the behavior to avoid the move login if fast fail is enabled. Once terminate_rport_io cleans up the rport, then we force the target back through the delete process, which re-drives the implicit logout, then kicks us back into discovery where we will discover the WWPN at the new location and do a PLOGI to it. Link: https://lore.kernel.org/r/1620756740-7045-3-git-send-email-brking@linux.vnet.ibm.comSigned-off-by:
-
Brian King authored
When service is being performed on an SVC with NPIV enabled, the WWPN of the canister / node being serviced fails over to the another canister / node. This looks to the ibmvfc driver as a WWPN moving from one SCSI ID to another. The driver will first attempt to do an implicit logout of the old SCSI ID. If this works, we simply delete the rport at the old location and add an rport at the new location and the FC transport class handles everything. However, if there is I/O outstanding, this implicit logout will fail, in which case we will send a "move login" request to the VIOS. This will cancel any outstanding I/O to that port, logout the port, and PLOGI the new port. Recently we've encountered a scenario where the move login fails. This was resulting in an attempted plogi to the new scsi id, without the old scsi id getting logged out, which is a VIOS protocol violation. To solve this, we want to keep tracking the old scsi id as the current scsi id. That way, once terminate_rport_io cancels the outstanding i/o, it will send us back through to do an implicit logout of the old scsi id, rather than the new scsi id, and then we can plogi the new scsi id. Link: https://lore.kernel.org/r/1620756740-7045-2-git-send-email-brking@linux.vnet.ibm.comSigned-off-by:
-
Bodo Stroesser authored
The bit definition TCM_DEV_BIT_PLUGGED should correctly be named TCMU_DEV_BIT_PLUGGED, since all other bits in the same bitfield have prefix TCMU_. Link: https://lore.kernel.org/r/20210512140654.31249-1-bostroesser@gmail.comSigned-off-by:
Bodo Stroesser <bostroesser@gmail.com> Signed-off-by:
-
Xiang Chen authored
Commit 3be8828f ("scsi: core: Avoid that ATA error handling can trigger a kernel hang or oops") moved rcu to scsi_cmnd instead of shost. Modify "shost->rcu" to "scmd->rcu" in a comment. Link: https://lore.kernel.org/r/1620646526-193154-1-git-send-email-chenxiang66@hisilicon.comSigned-off-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
-
Guenter Roeck authored
The result of container_of() operations is never NULL unless the embedded element is the first element of the structure, which is not the case here. The NULL checks are therefore unnecessary and misleading. Remove them. The changes in this patch were made automatically using the following Coccinelle script. @@ type t; identifier v; statement s; @@ <+... ( t v = container_of(...); | v = container_of(...); ) ... when != v - if (\( !v \| v == NULL \) ) s ...+> Link: https://lore.kernel.org/r/20210510041211.2051325-1-linux@roeck-us.netSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Guenter Roeck authored
The structure pointer passed to container_of() is never NULL; that was already checked. That means that the result of container_of() operations on it is also never NULL, even though se_node_acl is the first element of the structure embedding it. On top of that, it is misleading to perform a NULL check on the result of container_of() because the position of the contained element could change, which would make the test invalid. Remove the unnecessary NULL check. As it turns out, the container_of operation was only made for the purpose of the NULL check. If the container_of is actually needed, it is repeated later. Remove the container_of operation as well. The NULL check was identified and removed with the following Coccinelle script. @@ type t; identifier v; statement s; @@ <+... ( t v = container_of(...); | v = container_of(...); ) ... when != v - if (\( !v \| v == NULL \) ) s ...+> Link: https://lore.kernel.org/r/20210510040817.2050266-1-linux@roeck-us.net Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Hou Pu <houpu@bytedance.com> Cc: Mike Christie <michael.christie@oracle.com> Signed-off-by:
-
Uwe Kleine-König authored
to_sdebug_host() is a container_of operation, so it never returns NULL. Link: https://lore.kernel.org/r/20210506203206.254258-1-u.kleine-koenig@pengutronix.deSigned-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Christophe JAILLET authored
'ret' is known to be 0 here. No error code is available so just remove 'ret' from the error message. While at it, change the word "Queuing" into "Init" which looks more appropriate. Link: https://lore.kernel.org/r/3b9d5d767e09d03a07bede293a6ba32e3735cd1a.1620326191.git.christophe.jaillet@wanadoo.fr Fixes: c8806b6c ("snic: driver for Cisco SCSI HBA") Signed-off-by:
-
Varun Prakash authored
Instead of calling dma_unmap_sg() after completing WRITE I/O, call dma_unmap_sg() before calling target_execute_cmd() to sync the DMA buffer. Link: https://lore.kernel.org/r/1618403949-3443-1-git-send-email-varun@chelsio.com Cc: <stable@vger.kernel.org> # 5.4+ Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
Can Guo authored
Add a new sysfs group which has nodes to monitor data/request transfer performance. This sysfs group has nodes showing total sectors/requests transferred, total busy time spent and max/min/avg/sum latencies. This group can be enhanced later to show more UFS driver layer performance statistics data during runtime. Link: https://lore.kernel.org/r/1619058521-35307-2-git-send-email-cang@codeaurora.orgReviewed-by:
Daejun Park <daejun7.park@samsung.com> Acked-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
-
- 11 May, 2021 3 commits
-
-
Gustavo A. R. Silva authored
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Refactor the code according to the use of a flexible-array member in struct aac_raw_io2 instead of one-element array, and use the struct_size() helper. Also, this helps with the ongoing efforts to enable -Warray-bounds by fixing the following warnings: drivers/scsi/aacraid/aachba.c: In function ‘aac_build_sgraw2’: drivers/scsi/aacraid/aachba.c:3970:18: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds] 3970 | if (rio2->sge[j].length % (i*PAGE_SIZE)) { | ~~~~~~~~~^~~ drivers/scsi/aacraid/aachba.c:3974:27: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds] 3974 | nseg_new += (rio2->sge[j].length / (i*PAGE_SIZE)); | ~~~~~~~~~^~~ drivers/scsi/aacraid/aachba.c:4011:28: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds] 4011 | for (j = 0; j < rio2->sge[i].length / (pages * PAGE_SIZE); ++j) { | ~~~~~~~~~^~~ drivers/scsi/aacraid/aachba.c:4012:24: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds] 4012 | addr_low = rio2->sge[i].addrLow + j * pages * PAGE_SIZE; | ~~~~~~~~~^~~ drivers/scsi/aacraid/aachba.c:4014:33: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds] 4014 | sge[pos].addrHigh = rio2->sge[i].addrHigh; | ~~~~~~~~~^~~ drivers/scsi/aacraid/aachba.c:4015:28: warning: array subscript 1 is above array bounds of ‘struct sge_ieee1212[1]’ [-Warray-bounds] 4015 | if (addr_low < rio2->sge[i].addrLow) | ~~~~~~~~~^~~ [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/lkml/60414244.ur4%2FkI+fBF1ohKZs%25lkp@intel.com/ Link: https://lore.kernel.org/r/20210421185611.GA105224@embeddedorSigned-off-by:Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
kernel test robot <lkp@intel.com>
-
Asutosh Das authored
Resume the SCSI device described by the unit descriptor instead of the HBA. Link: https://lore.kernel.org/r/889bb20c47cc1ae5e40390f533712b704000345b.1619223249.git.asutoshd@codeaurora.orgReviewed-by:
Adrian Hunter <adrian.hunter@intel.com> Reviewed-by:
Asutosh Das <asutoshd@codeaurora.org> Signed-off-by:
-
Asutosh Das authored
During runtime-suspend of ufs host, the SCSI devices are already suspended and so are the queues associated with them. However, the ufs host sends SSU (START_STOP_UNIT) to the wlun during runtime-suspend. During the process blk_queue_enter() checks if the queue is not in suspended state. If so, it waits for the queue to resume, and never comes out of it. Commit 52abca64 ("scsi: block: Do not accept any requests while suspended") adds the check to see if the queue is in suspended state in blk_queue_enter(). Call trace: __switch_to+0x174/0x2c4 __schedule+0x478/0x764 schedule+0x9c/0xe0 blk_queue_enter+0x158/0x228 blk_mq_alloc_request+0x40/0xa4 blk_get_request+0x2c/0x70 __scsi_execute+0x60/0x1c4 ufshcd_set_dev_pwr_mode+0x124/0x1e4 ufshcd_suspend+0x208/0x83c ufshcd_runtime_suspend+0x40/0x154 ufshcd_pltfrm_runtime_suspend+0x14/0x20 pm_generic_runtime_suspend+0x28/0x3c __rpm_callback+0x80/0x2a4 rpm_suspend+0x308/0x614 rpm_idle+0x158/0x228 pm_runtime_work+0x84/0xac process_one_work+0x1f0/0x470 worker_thread+0x26c/0x4c8 kthread+0x13c/0x320 ret_from_fork+0x10/0x18 Fix this by registering ufs device wlun as a SCSI driver and registering it for block runtime-pm. Also make this a supplier for all other LUNs. This way the wlun device suspends after all the consumers and resumes after HBA resumes. This also registers a new SCSI driver for rpmb wlun. This new driver is mostly used to clear rpmb uac. [mkp: resolve merge conflict with 5.13-rc1 and fix doc warning] Fixed smatch warnings: Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/4662c462e79e3e7f541f54f88f8993f421026d83.1619223249.git.asutoshd@codeaurora.orgReviewed-by:
-
- 10 May, 2021 11 commits
-
-
Wan Jiabing authored
Fix the following coccicheck warning: ./drivers/scsi/qla4xxx/ql4_83xx.c:475:23-25: WARNING !A || A && B is equivalent to !A || B Link: https://lore.kernel.org/r/20210414121726.12503-1-wanjiabing@vivo.comSigned-off-by:
Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
-
ching Huang authored
Update driver version to v1.50.00.04-20210414. Link: https://lore.kernel.org/r/1ca5474a5c6fea59bf13cdf84f7bd17f0b20f562.camel@areca.com.twSigned-off-by:
ching Huang <ching2048@areca.com.tw> Signed-off-by:
-
ching Huang authored
This patch fixes the wrong CDB payload report to IOP. Link: https://lore.kernel.org/r/d2c97df3c817595c6faf582839316209022f70da.camel@areca.com.twSigned-off-by:
-
Shixin Liu authored
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Link: https://lore.kernel.org/r/20210329094532.4165147-1-liushixin2@huawei.comAcked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
Shixin Liu <liushixin2@huawei.com> Signed-off-by:
-
Colin Ian King authored
The pointer mbox is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Link: https://lore.kernel.org/r/20210420104919.376734-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
The pointer tmp_hdr is being assigned a value that is never read, the assignment is redundant and can be removed. Link: https://lore.kernel.org/r/20210420104123.376420-1-colin.king@canonical.com Addresses-Coverity: ("Unused value") Reviewed-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
Colin Ian King authored
Checkpatch is warning that char* text sould be char *text to match the coding style. Fix this. Link: https://lore.kernel.org/r/20210416094713.2033212-1-colin.king@canonical.comSigned-off-by:
-
Randy Dunlap authored
Fix kernel-doc warnings, spellos, and typos. ../drivers/message/fusion/mptsas.c:432: warning: Function parameter or member 'sas_address' not described in 'mptsas_find_portinfo_by_sas_address' ../drivers/message/fusion/mptsas.c:432: warning: Excess function parameter 'handle' description in 'mptsas_find_portinfo_by_sas_address' ../drivers/message/fusion/mptsas.c:581: warning: Function parameter or member 'slot' not described in 'mptsas_add_device_component' ../drivers/message/fusion/mptsas.c:581: warning: Function parameter or member 'enclosure_logical_id' not described in 'mptsas_add_device_component' ../drivers/message/fusion/mptsas.c:678: warning: Function parameter or member 'starget' not described in 'mptsas_add_device_component_starget_ir' ../drivers/message/fusion/mptsas.c:678: warning: Excess function parameter 'channel' description in 'mptsas_add_device_component_starget_ir' ../drivers/message/fusion/mptsas.c:678: warning: Excess function parameter 'id' description in 'mptsas_add_device_component_starget_ir' ../drivers/message/fusion/mptsas.c:990: warning: Function parameter or member 'ioc' not described in 'mptsas_find_vtarget' ../drivers/message/fusion/mptsas.c:990: warning: Function parameter or member 'channel' not described in 'mptsas_find_vtarget' ../drivers/message/fusion/mptsas.c:990: warning: Function parameter or member 'id' not described in 'mptsas_find_vtarget' ../drivers/message/fusion/mptsas.c:990: warning: expecting prototype for csmisas_find_vtarget(). Prototype was for mptsas_find_vtarget() instead ../drivers/message/fusion/mptsas.c:1064: warning: Function parameter or member 'ioc' not described in 'mptsas_target_reset' ../drivers/message/fusion/mptsas.c:1064: warning: Function parameter or member 'channel' not described in 'mptsas_target_reset' ../drivers/message/fusion/mptsas.c:1064: warning: Function parameter or member 'id' not described in 'mptsas_target_reset' ../drivers/message/fusion/mptsas.c:1135: warning: Function parameter or member 'ioc' not described in 'mptsas_target_reset_queue' ../drivers/message/fusion/mptsas.c:1135: warning: Function parameter or member 'sas_event_data' not described in 'mptsas_target_reset_queue' ../drivers/message/fusion/mptsas.c:1217: warning: Function parameter or member 'mf' not described in 'mptsas_taskmgmt_complete' ../drivers/message/fusion/mptsas.c:1217: warning: Function parameter or member 'mr' not described in 'mptsas_taskmgmt_complete' ../drivers/message/fusion/mptsas.c:1311: warning: Function parameter or member 'ioc' not described in 'mptsas_ioc_reset' ../drivers/message/fusion/mptsas.c:1311: warning: Function parameter or member 'reset_phase' not described in 'mptsas_ioc_reset' ../drivers/message/fusion/mptsas.c:1311: warning: expecting prototype for mptscsih_ioc_reset(). Prototype was for mptsas_ioc_reset() instead ../drivers/message/fusion/mptsas.c:1951: warning: expecting prototype for mptsas_mptsas_eh_timed_out(). Prototype was for mptsas_eh_timed_out() instead ../drivers/message/fusion/mptsas.c:3623: warning: Function parameter or member 'fw_event' not described in 'mptsas_send_expander_event' ../drivers/message/fusion/mptsas.c:3623: warning: Excess function parameter 'ioc' description in 'mptsas_send_expander_event' ../drivers/message/fusion/mptsas.c:3623: warning: Excess function parameter 'expander_data' description in 'mptsas_send_expander_event' ../drivers/message/fusion/mptsas.c:4010: warning: Excess function parameter 'sas_address' description in 'mptsas_scan_sas_topology' ../drivers/message/fusion/mptsas.c:4783: warning: Function parameter or member 'issue_reset' not described in 'mptsas_issue_tm' ../drivers/message/fusion/mptsas.c:4856: warning: Function parameter or member 'fw_event' not described in 'mptsas_broadcast_primitive_work' ../drivers/message/fusion/mptsas.c:4856: warning: Excess function parameter 'work' description in 'mptsas_broadcast_primitive_work' mptsas.c:984: warning: missing initial short description on line: * csmisas_find_vtarget mptsas.c:993: warning: expecting prototype for csmisas_find_vtarget(). Prototype was for mptsas_find_vtarget() instead mptsas.c:1053: warning: missing initial short description on line: * mptsas_target_reset mptsas.c:1057: warning: contents before sections mptsas.c:1125: warning: missing initial short description on line: * mptsas_target_reset_queue mptsas.c:1131: warning: contents before sections mptsas.c:1308: warning: missing initial short description on line: * mptsas_ioc_reset Link: https://lore.kernel.org/r/20210418203259.835-1-rdunlap@infradead.org Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warnings, spellos, and typos. drivers/scsi/mpt3sas/mpt3sas_base.c:5430: warning: Excess function parameter 'ct' description in '_base_allocate_pcie_sgl_pool' drivers/scsi/mpt3sas/mpt3sas_base.c:5493: warning: Excess function parameter 'ctr' description in '_base_allocate_chain_dma_pool' mpt3sas_base.c:1362: warning: missing initial short description on line: * _base_display_reply_info - mpt3sas_base.c:2151: warning: contents before sections mpt3sas_base.c:2314: warning: missing initial short description on line: * base_make_prp_nvme - Link: https://lore.kernel.org/r/20210418203246.782-1-rdunlap@infradead.org Cc: linux-scsi@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: MPT-FusionLinux.pdl@broadcom.com Signed-off-by:
-
Yang Yingliang authored
Use kmemdup_nul() helper instead of open-coding to simplify the code. Link: https://lore.kernel.org/r/20210402092517.2445595-1-yangyingliang@huawei.comReported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Jason Yan authored
When a SCSI device is offline a MODE SENSE command will return a result with only DID_NO_CONNECT set. In sd_read_write_protect_flag() only the status byte of the result is checked. Despite a returned status of DID_NO_CONNECT the command is considered successful and we read sdkp->write_prot from a buffer containing garbage. Modify scsi_status_is_good() to treat DID_NO_CONNECT as a failure case. Link: https://lore.kernel.org/r/20210330114727.234467-1-yanaijie@huawei.comSigned-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
- 09 May, 2021 3 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Commit b9d79e4c ("fbmem: Mark proc_fb_seq_ops as __maybe_unused") places the '__maybe_unused' in an entirely incorrect location between the "struct" keyword and the structure name. It's a wonder that gcc accepts that silently, but clang quite reasonably warns about it: drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes] static const struct __maybe_unused seq_operations proc_fb_seq_ops = { ^ Fix it. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Bit later than usual, I queued them all up on Friday then promptly forgot to write the pull request email. This is mainly amdgpu fixes, with some radeon/msm/fbdev and one i915 gvt fix thrown in. amdgpu: - MPO hang workaround - Fix for concurrent VM flushes on vega/navi - dcefclk is not adjustable on navi1x and newer - MST HPD debugfs fix - Suspend/resumes fixes - Register VGA clients late in case driver fails to load - Fix GEM leak in user framebuffer create - Add support for polaris12 with 32 bit memory interface - Fix duplicate cursor issue when using overlay - Fix corruption with tiled surfaces on VCN3 - Add BO size and stride check to fix BO size verification radeon: - Fix off-by-one in power state parsing - Fix possible memory leak in power state parsing msm: - NULL ptr dereference fix fbdev: - procfs disabled warning fix i915: - gvt: Fix a possible division by zero in vgpu display rate calculation" * tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: Use device specific BO size & stride check. drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode. drm/amd/pm: initialize variable drm/radeon: Avoid power table parsing memory leaks drm/radeon: Fix off-by-one power_state index heap overwrite drm/amd/display: Fix two cursor duplication when using overlay drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC fbmem: Mark proc_fb_seq_ops as __maybe_unused drm/msm/dpu: Delete bonkers code drm/i915/gvt: Prevent divided by zero when calculating refresh rate amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create drm/amdgpu: Register VGA clients after init can no longer fail drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown drm/amdgpu: fix r initial values drm/amd/display: fix wrong statement in mst hpd debugfs amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2 drm/amd/display: Reject non-zero src_y and src_x for video planes
-
