Use devm_alloc_etherdev_mqs() and simplify code.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drop pinctrl_pm_select_default_state call from probe as default
pinctrl state is set by DD core.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use local variable struct device *dev in probe to simplify code.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update cpsw_split_res() to accept struct cpsw_common instead of
struct net_device to simplify code.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

All TI drivers CPSW/NETCP can't work without ALE, hence simplify
build of those drivers by always linking cpsw_ale and drop
CONFIG_TI_CPSW_ALE config option.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Both drivers CPSW and EMAC can't work without CPDMA, hence simplify build
of those drivers by always linking davinci_cpdma and drop TI_DAVINCI_CPDMA
config option.
Note. the davinci_emac driver module was changed to "ti_davinci_emac" to
make build work.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace textual license with SPDX-License-Identifier.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Johannes Berg says:

====================
strict netlink validation

Here's a respin, with the following changes:
 * change message when rejecting unknown attribute types (David Ahern)
 * drop nl80211 patch - I'll apply it separately
 * remove NL_VALIDATE_POLICY - we have a lot of calls to nla_parse()
   that really should be without a policy as it has previously been
   validated - need to find a good way to handle this later
 * include the correct generic netlink change (d'oh, sorry)
====================
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add options to strictly validate messages and dump messages,
sometimes perhaps validating dump messages non-strictly may
be required, so add an option for that as well.

Since none of this can really be applied to existing commands,
set the options everwhere using the following spatch:

    @@
    identifier ops;
    expression X;
    @@
    struct genl_ops ops[] = {
    ...,
     {
            .cmd = X,
    +       .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
            ...
     },
    ...
    };

For new commands one should just not copy the .validate 'opt-out'
flags and thus get strict validation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unfortunately, we cannot add strict parsing for all attributes, as
that would break existing userspace. We currently warn about it, but
that's about all we can do.

For new attributes, however, the story is better: nobody is using
them, so we can reject bad sizes.

Also, for new attributes, we need not accept them when the policy
doesn't declare their usage.

David Ahern and I went back and forth on how to best encode this, and
the best way we found was to have a "boundary type", from which point
on new attributes have all possible validation applied, and NLA_UNSPEC
is rejected.

As we didn't want to add another argument to all functions that get a
netlink policy, the workaround is to encode that boundary in the first
entry of the policy array (which is for type 0 and thus probably not
really valid anyway). I put it into the validation union for the rare
possibility that somebody is actually using attribute 0, which would
continue to work fine unless they tried to use the extended validation,
which isn't likely. We also didn't find any in-tree users with type 0.

The reason for setting the "start strict here" attribute is that we
never really need to start strict from 0, which is invalid anyway (or
in legacy families where that isn't true, it cannot be set to strict),
so we can thus reserve the value 0 for "don't do this check" and don't
have to add the tag to all policies right now.

Thus, policies can now opt in to this validation, which we should do
for all existing policies, at least when adding new attributes.

Note that entirely *new* policies won't need to set it, as the use
of that should be using nla_parse()/nlmsg_parse() etc. which anyway
do fully strict validation now, regardless of this.

So in effect, this patch only covers the "existing command with new
attribute" case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This re-adds the parse and validate functions like nla_parse()
that are now actually strict after the previous rename and were
just split out to make sure everything is converted (and if not
compilation of the previous patch would fail.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We currently have two levels of strict validation:

 1) liberal (default)
     - undefined (type >= max) & NLA_UNSPEC attributes accepted
     - attribute length >= expected accepted
     - garbage at end of message accepted
 2) strict (opt-in)
     - NLA_UNSPEC attributes accepted
     - attribute length >= expected accepted

Split out parsing strictness into four different options:
 * TRAILING     - check that there's no trailing data after parsing
                  attributes (in message or nested)
 * MAXTYPE      - reject attrs > max known type
 * UNSPEC       - reject attributes with NLA_UNSPEC policy entries
 * STRICT_ATTRS - strictly validate attribute size

The default for future things should be *everything*.
The current *_strict() is a combination of TRAILING and MAXTYPE,
and is renamed to _deprecated_strict().
The current regular parsing has none of this, and is renamed to
*_parse_deprecated().

Additionally it allows us to selectively set one of the new flags
even on old policies. Notably, the UNSPEC flag could be useful in
this case, since it can be arranged (by filling in the policy) to
not be an incompatible userspace ABI change, but would then going
forward prevent forgetting attribute entries. Similar can apply
to the POLICY flag.

We end up with the following renames:
 * nla_parse           -> nla_parse_deprecated
 * nla_parse_strict    -> nla_parse_deprecated_strict
 * nlmsg_parse         -> nlmsg_parse_deprecated
 * nlmsg_parse_strict  -> nlmsg_parse_deprecated_strict
 * nla_parse_nested    -> nla_parse_nested_deprecated
 * nla_validate_nested -> nla_validate_nested_deprecated

Using spatch, of course:
    @@
    expression TB, MAX, HEAD, LEN, POL, EXT;
    @@
    -nla_parse(TB, MAX, HEAD, LEN, POL, EXT)
    +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT)

    @@
    expression NLH, HDRLEN, TB, MAX, POL, EXT;
    @@
    -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT)
    +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT)

    @@
    expression NLH, HDRLEN, TB, MAX, POL, EXT;
    @@
    -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT)
    +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT)

    @@
    expression TB, MAX, NLA, POL, EXT;
    @@
    -nla_parse_nested(TB, MAX, NLA, POL, EXT)
    +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT)

    @@
    expression START, MAX, POL, EXT;
    @@
    -nla_validate_nested(START, MAX, POL, EXT)
    +nla_validate_nested_deprecated(START, MAX, POL, EXT)

    @@
    expression NLH, HDRLEN, MAX, POL, EXT;
    @@
    -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT)
    +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT)

For this patch, don't actually add the strict, non-renamed versions
yet so that it breaks compile if I get it wrong.

Also, while at it, make nla_validate and nla_parse go down to a
common __nla_validate_parse() function to avoid code duplication.

Ultimately, this allows us to have very strict validation for every
new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the
next patch, while existing things will continue to work as is.

In effect then, this adds fully strict validation for any new command.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rather than using NLA_UNSPEC for this type of thing, use NLA_MIN_LEN
so we can make NLA_UNSPEC be NLA_REJECT under certain conditions for
future attributes.

While at it, also use NLA_EXACT_LEN for the struct example.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michal Kubecek says:

====================
make nla_nest_start() add NLA_F_NESTED flag

One of the comments in recent review of the ethtool netlink series pointed
out that proposed ethnl_nest_start() helper which adds NLA_F_NESTED to
second argument of nla_nest_start() is not really specific to ethtool
netlink code. That is hard to argue with as closer inspection revealed that
exactly the same helper already exists in ipset code (except it's a macro
rather than an inline function).

Another observation was that even if NLA_F_NESTED flag was introduced in
2007, only few netlink based interfaces set it in kernel generated messages
and even many recently added APIs omit it. That is unfortunate as without
the flag, message parsers not familiar with attribute semantics cannot
recognize nested attributes and do not see message structure; this affects
e.g. wireshark dissector or mnl_nlmsg_fprintf() from libmnl.

This is why I'm suggesting to rename existing nla_nest_start() to different
name (nla_nest_start_noflag) and reintroduce nla_nest_start() as a wrapper
adding NLA_F_NESTED flag. This is implemented in first patch which is
mostly generated by spatch. Second patch drops ipset helper macros which
lose their purpose. Third patch cleans up minor coding style issues found
by checkpatch.pl in first patch.

We could leave nla_nest_start() untouched and simply add a wrapper adding
NLA_F_NESTED but that would probably preserve the state when even most new
code doesn't set the flag.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a simple cleanup addressing two coding style issues found by
checkpatch.pl in an earlier patch. It's submitted as a separate patch to
keep the original patch as it was generated by spatch.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the previous commit, both ipset_nest_start() and ipset_nest_end() are
just aliases for nla_nest_start() and nla_nest_end() so that there is no
need to keep them.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most
netlink based interfaces (including recently added ones) are still not
setting it in kernel generated messages. Without the flag, message parsers
not aware of attribute semantics (e.g. wireshark dissector or libmnl's
mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display
the structure of their contents.

Unfortunately we cannot just add the flag everywhere as there may be
userspace applications which check nlattr::nla_type directly rather than
through a helper masking out the flags. Therefore the patch renames
nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start()
as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually
are rewritten to use nla_nest_start().

Except for changes in include/net/netlink.h, the patch was generated using
this semantic patch:

@@ expression E1, E2; @@
-nla_nest_start(E1, E2)
+nla_nest_start_noflag(E1, E2)

@@ expression E1, E2; @@
-nla_nest_start_noflag(E1, E2 | NLA_F_NESTED)
+nla_nest_start(E1, E2)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
net/tls: small code cleanup

This small patch set cleans up tls (mostly offload parts).
Other than avoiding unnecessary error messages - no functional
changes here.

v2 (Saeed):
 - fix up Review tags;
 - remove the warning on failure completely.
====================
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To avoid a sparse warning byteswap the be32 sequence number
before it's stored in the atomic value.  While at it drop
unnecessary brackets and use kernel's u64 type.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There seems to be no reason for tls_ops to be defined in netdevice.h
which is included in a lot of places.  Don't wrap the struct/enum
declaration in ifdefs, it trickles down unnecessary ifdefs into
driver code.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tls_device_sk_destruct being set on a socket used to indicate
that socket is a kTLS device one.  That is no longer true -
now we use sk_validate_xmit_skb pointer for that purpose.
Remove the export.  tls_device_attach() needs to be moved.

While at it, remove the dead declaration of tls_sk_destruct().
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently when CONFIG_TLS_DEVICE is set each time kTLS
connection is opened and the offload is not successful
(either because the underlying device doesn't support
it or e.g. it's tables are full) a rate limited error
will be printed to the logs.

There is nothing wrong with failing TLS offload.  SW
path will process the packets just fine, drop the
noisy messages.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-next-for-davem-2019-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Various updates, notably:
 * extended key ID support (from 802.11-2016)
 * per-STA TX power control support
 * mac80211 TX performance improvements
 * HE (802.11ax) updates
 * mesh link probing support
 * enhancements of multi-BSSID support (also related to HE)
 * OWE userspace processing support
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Huazhong Tan says:

====================
code optimizations & bugfixes for HNS3 driver

This patch-set includes code optimizations and bugfixes for the HNS3
ethernet controller driver.

[patch 1/11 - 3/11] fixes some bugs about the IO path

[patch 4/11 - 6/11] includes some optimization and bugfixes
about mailbox handling

[patch 7/11 - 11/11] adds misc code optimizations and bugfixes.

Change log:
V2->V3: fixes comments from Neil Horman, removes [patch 8/12]
V1->V2: adds modification on [patch 8/12]
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

It's meaningless to trigger reset when failed to send command to IMP,
because the failure is usually caused by no authority, illegal command
and so on. When that happened, we just need to return the status code
for further debugging.
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a check for the hns3_put_ring_config() to prevent
double free, and for more readable, move the NULL assignment of
priv->ring_data into the hns3_put_ring_config().
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The test results show that the maximum time of hardware return
to mac link state is 500MS.The software needs to set twice the
maximum time of hardware return state (1000MS).

If not modified, the loopback test returns probability failure.
Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When configure pause, current implementation returns directly
after setup PFC without setup BP, which is not sufficient.

So this patch fixes it, only return while setting PFC failed.

Fixes: 44e59e37 ("net: hns3: do not return GE PFC setting err when initializing")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the hardware does not handle mailboxes and the hardware
reset include TQP reset, so it is unnecessary to reset TQP
in the hclgevf_ae_stop() while doing VF reset. Also it is
unnecessary to reset the remaining TQP when one reset fails.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch uses a reserved byte in the hclge_mbx_vf_to_pf_cmd
to save the need_resp flag, so when PF received the mailbox,
it can use it to decise whether send a response to VF.

For hclge_set_vf_uc_mac_addr(), it should use mbx_need_resp flag
to decide whether send response to VF.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since irq handler and mailbox task will both update arq's count,
so arq's count should use atomic_t instead of u32, otherwise
its value may go wrong finally.

Fixes: 07a0556a ("net: hns3: Changes to support ARQ(Asynchronous Receive Queue)")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

HCLGEVF_STATE_CMD_DISABLE is more suitable than
HCLGEVF_STATE_RST_HANDLING to stop sending keep alive msg,
since HCLGEVF_STATE_RST_HANDLING only be set when the reset
task is running.

Fixes: c59a85c0 ("net: hns3: stop sending keep alive msg to PF when VF is resetting")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bdinfo handled in hns3_handle_bdinfo is only valid on the
last BD of the current packet, currently the bd info may be handled
based on the first BD if the packet has more than two BDs, which
may cause rx error.

This patch fixes it by using the last BD of the current packet in
hns3_handle_bdinfo.

Also, hns3_set_rx_skb_rss_type has used RSS hash value from the last
BD of the current packet, so remove the same last BD calculation in
hns3_set_rx_skb_rss_type and call it from hns3_handle_bdinfo.

Fixes: e5597095 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hns3_desc_unused() returns how many BD have been cleaned, but new
buffer has not been attached to them. The register of
HNS3_RING_RX_RING_FBDNUM_REG returns how many BD need allocating new
buffer to or need to cleaned. So the remaining BD need to be clean
is HNS3_RING_RX_RING_FBDNUM_REG - hns3_desc_unused().

Also, new buffer can not attach to the pending BD when the last BD is
not handled, because memcpy has not been done on the first pending BD.

This patch fixes by subtracting the pending BD num from unused_count
after 'HNS3_RING_RX_RING_FBDNUM_REG - unused_count' is used to calculate
the BD bum need to be clean.

Fixes: e5597095 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hns3_clean_tx_ring calls hns3_nic_reclaim_one_desc to clean
buffers and set ring->next_to_clean, then hns3_nic_net_xmit
reuses the cleaned buffers. But there are no memory barriers
when buffers gets recycled, so the recycled buffers can be
corrupted.

This patch uses smp_store_release to update ring->next_to_clean
and smp_load_acquire to read ring->next_to_clean to properly
hand off buffers from hns3_clean_tx_ring to hns3_nic_net_xmit.

Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Device may be shutdown without the hardware being reinitialized, in
which case we want to ensure we cleanup properly.

This is especially important for kexec with traffic flowing.

The shutdown procedures resembles the remove procedures, so we can reuse
those common tasks.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/nfc/st95hf/core.c: In function 'st95hf_irq_thread_handler':
drivers/nfc/st95hf/core.c:786:26: warning:
 variable 'nfcddev' set but not used [-Wunused-but-set-variable]

drivers/nfc/st95hf/core.c:784:17: warning:
 variable 'dev' set but not used [-Wunused-but-set-variable]

They are never used since introduction in
commit cab47333 ("NFC: Add STMicroelectronics ST95HF driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I forgot to remove one rcu_read_unlock() before a return statement.

Joy of mixing goto and return styles in a function :)

Fixes: 4109a2c3 ("tipc: tipc_udp_recv() cleanup vs rcu verbs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PHY's behave differently when being reset. Some reset registers to
defaults, some don't. Some trigger an autoneg restart, some don't.

So let's also set the autoneg restart bit when resetting. Then PHY
behavior should be more consistent. Clearing BMCR_ISOLATE serves the
same purpose and is borrowed from genphy_restart_aneg.

BMCR holds the speed / duplex settings in fixed mode. Therefore
we may have an issue if a soft reset resets BMCR to its default.
So better call genphy_setup_forced() afterwards in fixed mode.
We've seen no related complaint in the last >10 yrs, so let's
treat it as an improvement.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All Apple products use the same protocol for tethering over USB.
To simplify the code and make it future proof, use
USB_VENDOR_AND_INTERFACE_INFO() instead of
USB_DEVICE_AND_INTERFACE_INFO() to automatically detect and support
all existing and future Apple products using the same interface.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>