Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The return value of gpiod_to_irq should be checked before giving
it to devm_request_threaded_irq in order to not pass an error
code in case it fails.
Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Reviewed-by: Vlad Dogaru <vlad.dogaru@intel.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Adding binding documentation for ADC MCP3422.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Adding binding documentation for Texas Instruments' ADC128S052 ADC chip.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Added Power Management Support.
Signed-off-by: Kevin Tsai <ktsai@capellamicro.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Code reformatting based on checkpatch.pl with --strict:
Comparison to NULL rewritten as !indio_dev
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Code reformatting based on checkpatch.pl with --strict:
Alignment should match open paranthesis cases corrected
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch fix spelling typo in MODULE_DESCRIPTION
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This is a follow up patches after adding i2c mux adapter for bypass
mode. Potentially many different types of sensor can be attached to
INVMPU6XXX device, which can be connected to main cpu i2c bus in
bypass mode.
Why do we need this?
The system ACPI table entry will consist of only one device for
INV6XXX, assuming that this driver will handle all connected sensors.
That is not true for the Linux driver. There are bunch of IIO drivers
for each sensors, hence we created a mux on this device. So to load
these additional drivers, we need to create i2c devices for them
in this driver using this mux adapter.

There are multiple options:
1. Use the auto detect feature, this needs a new i2c class for the
adapter as the existing HWMON class is not acceptable. Also the
autodetect has overhead of executing detect method for each
matching class of adapters.
This is a simple implementation. This option was previously submitted
with not a happy feedback.

2. Option is use ACPI magic and parse the configuration data. What
we need to create a i2c device at a minimum is address and a name.
Address can be obtained for secondary device in more or less in a
standard way from using _CRS element. But there is no name. To get
name we need to process proprietary vendor data. Not having name is
not fun, as you have to create device using the device name of
INVN6XXXX, respecting driver duplicate name space restriction.
Also each client driver needs to have this name in the id table.
Since multiple driver can be loaded, the driver should be able to
detect its presence and gracefully exit for the other client driver
to take it over.
So we use two step process:
- Use DMI to id platform and parse propritery data. This is not uncommon
for many x86 platform specific driver. We will get both name and address.
The change created necessary infrastructure to add more properitery vendor
data parsing.
- If DMI match fails, then create device on INV6XXX-client (we can't
create with same name as INV6XXX as it will cause duplicate name and driver
model will reject.) With this each client sensor driver which needs to get
attached via INV6XXXX, need this name in the id table and detect the
physical presence of sensor in probe and exit if not found.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The regmap_config struct may be const because it is not modified by the
driver and regmap_init() accepts pointer to const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The regmap_access_table and regmap_config structures may be const
because they are not modified by the driver and regmap_init() accepts
pointer to const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Since 39b2bbe3 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for
outputs.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Change struct iio_prtc_trigger_info frequency
type from int to unsigned int.
Since it is always treated as such in the driver
so they type should probably reflect this.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch introduces the use of function put_unaligned_le32.

This is done using Coccinelle and semantic patch used is as follows:

@@ identifier tmp; expression ptr; expression y,e; type T; @@

- tmp = cpu_to_le32(y);

  <+... when != tmp
- memcpy(ptr, (T)&tmp, ...);
+ put_unaligned_le32(y,ptr);
  ...+>
? tmp = e

@@ type T; identifier tmp; @@

- T tmp;
...when != tmp
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

After UAPI header file split [1] all user-kernel interfaces were
placed under include/uapi/.

This patch moves IIO user specific API from:
	* include/linux/iio/events.h => include/uapi/linux/iio/events.h
	* include/linux/types.h => include/uapi/linux/types.h

Now there is no need for nasty tricks to compile userspace programs
(e.g iio_event_monitor). Just installing the kernel headers with
make headers_install command does the job.

[1] http://lwn.net/Articles/507794/Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Wrong type in printf format string, requires 'int'
but the argument type is 'unsigned int'

This was found using a static code analysis program called cppcheck
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Wrong type in printf format string, requires 'int'
but the argument type is 'unsigned int'

This was found using a static code analysis program called cppcheck
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Line over 80 characters corrected
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Indentation corrections in struct initializations and
one line over 80 characters split into two lines
Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Previous of this patch the check was only done if we enabled the event
and it was already enabled. We can do the same if the event is
disabled and we want to disable it.

The patch also adds the same check on the trigger code.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch combines the any motion and new data interrupts function
into a single, generic, interrupt enable function. On top of this, we
can later refactor triggers to make it easier to add new triggers.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Move the slope duration and threshold update in a separate function to
reduce code duplicate between chip init and motion interrupt setup.

Also move the slope update code from the interrupt setup function to
the trigger set state function so that we can later refactor the
interrupt code.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Move all core (non-custom) buffer attributes to a vector to make it
easier to add more of them in the future.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

return type of wait_for_completion_timeout is unsigned long not int, this
patch only fixes up the return handling.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

odr_bits values are between 0 and 11, so we can use the index
in kmx61_samp_freq_table instead of odr_bits structure member.
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch adds the error handling for the value returned from
ade7759_spi_read_reg_16. With this patch, the following randconfig
warnings get fixed automatically.

drivers/staging/iio/meter/ade7759.c:224:6: warning: ‘val’ may be
used uninitialized in this function [-Wmaybe-uninitialized]
drivers/staging/iio/meter/ade7759.c:309:6: warning: ‘val’ may be
used uninitialized in this function [-Wmaybe-uninitialized]
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch adds the error handling for the value returned from
ade7754_spi_read_reg_8. With this patch, the following randconfig
warnings get fixed automatically.

drivers/staging/iio/meter/ade7754.c:222:6: warning: ‘val’ may be used
uninitialized in this function [-Wmaybe-uninitialized]
drivers/staging/iio/meter/ade7754.c:368:6: warning: ‘val’ may be used
uninitialized in this function [-Wmaybe-uninitialized]
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

We want those fixes in here for testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull ARM SoC fixes from Olof Johansson:
 "One more week's worth of fixes.  Worth pointing out here are:

   - A patch fixing detaching of iommu registrations when a device is
     removed -- earlier the ops pointer wasn't managed properly
   - Another set of Renesas boards get the same GIC setup fixup as
     others have in previous -rcs
   - Serial port aliases fixups for sunxi.  We did the same to tegra but
     we caught that in time before the merge window due to more machines
     being affected.  Here it took longer for anyone to notice.
   - A couple more DT tweaks on sunxi
   - A follow-up patch for the mvebu coherency disabling in last -rc
     batch"

* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm: dma-mapping: Set DMA IOMMU ops in arm_iommu_attach_device()
  ARM: shmobile: r8a7790: Instantiate GIC from C board code in legacy builds
  ARM: shmobile: r8a73a4: Instantiate GIC from C board code in legacy builds
  ARM: mvebu: don't set the PL310 in I/O coherency mode when I/O coherency is disabled
  ARM: sunxi: dt: Fix aliases
  ARM: dts: sun4i: Add simplefb node with de_fe0-de_be0-lcd0-hdmi pipeline
  ARM: dts: sun6i: ippo-q8h-v5: Fix serial0 alias
  ARM: dts: sunxi: Fix usb-phy support for sun4i/sun5i

Pull input layer updates from Dmitry Torokhov:
 "Just a few quirks for PS/2 this time"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elantech - add more Fujtisu notebooks to force crc_enabled
  Input: i8042 - add noloop quirk for Medion Akoya E7225 (MD98857)
  Input: synaptics - adjust min/max for Lenovo ThinkPad X1 Carbon 2nd

Commit 8eb23b9f ("sched: Debug nested sleeps") added code to report
on nested sleep conditions, which we generally want to avoid because the
inner sleeping operation can re-set the thread state to TASK_RUNNING,
but that will then cause the outer sleep loop not actually sleep when it
calls schedule.

However, that's actually valid traditional behavior, with the inner
sleep being some fairly rare case (like taking a sleeping lock that
normally doesn't actually need to sleep).

And the debug code would actually change the state of the task to
TASK_RUNNING internally, which makes that kind of traditional and
working code not work at all, because now the nested sleep doesn't just
sometimes cause the outer one to not block, but will cause it to happen
every time.

In particular, it will cause the cardbus kernel daemon (pccardd) to
basically busy-loop doing scheduling, converting a laptop into a heater,
as reported by Bruno Prémont.  But there may be other legacy uses of
that nested sleep model in other drivers that are also likely to never
get converted to the new model.

This fixes both cases:

 - don't set TASK_RUNNING when the nested condition happens (note: even
   if WARN_ONCE() only _warns_ once, the return value isn't whether the
   warning happened, but whether the condition for the warning was true.
   So despite the warning only happening once, the "if (WARN_ON(..))"
   would trigger for every nested sleep.

 - in the cases where we knowingly disable the warning by using
   "sched_annotate_sleep()", don't change the task state (that is used
   for all core scheduling decisions), instead use '->task_state_change'
   that is used for the debugging decision itself.

(Credit for the second part of the fix goes to Oleg Nesterov: "Can't we
avoid this subtle change in behaviour DEBUG_ATOMIC_SLEEP adds?" with the
suggested change to use 'task_state_change' as part of the test)
Reported-and-bisected-by: Bruno Prémont <bonbons@linux-vserver.org>
Tested-by: Rafael J Wysocki <rjw@rjwysocki.net>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Cc: Ilya Dryomov <ilya.dryomov@inktank.com>,
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>,
Cc: Davidlohr Bueso <dave@stgolabs.net>,
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add two more Fujitsu LIFEBOOK models that also ship with the Elantech
touchpad and don't work with crc_disabled to the quirk list.
Signed-off-by: Rainer Koenig <Rainer.Koenig@ts.fujitsu.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge tag 'renesas-soc-fixes3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes

Merge "Third Round of Renesas ARM Based SoC Fixes for v3.19" from Simon Horman:

* Instantiate GIC from C board code in legacy builds on r8a7790 and r8a73a4

* tag 'renesas-soc-fixes3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7790: Instantiate GIC from C board code in legacy builds
  ARM: shmobile: r8a73a4: Instantiate GIC from C board code in legacy builds
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull i2c fixes from Wolfram Sang:
 "i2c driver bugfixes (s3c2410, slave-eeprom, sh_mobile), size
  regression "bugfix" (i2c slave), documentation bugfix (st).

  Also, one documentation update (da9063), so some devicetrees can now
  be verified"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: sh_mobile: terminate DMA reads properly
  i2c: Only include slave support if selected
  i2c: s3c2410: fix ABBA deadlock by keeping clock prepared
  i2c: slave-eeprom: fix boundary check when using sysfs
  i2c: st: Rename clock reference to something that exists
  DT: i2c: Add devices handled by the da9063 MFD driver

Merge tag 'iio-for-3.20b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing

Jonathan writes:

Second round of IIO new drivers, functionality and cleanups for the 3.20 cycle.

New drivers and device support:
* Capella cm3232 ambient light sensor driver.
* Freescale MMA9553 pedometer and activity monitor. Note this involved a
  refactor of the mma9551 driver to pull out shared elements.
* Samsung sensor hub (as used in the galaxy gear 2 watch) Core support
  and initial drivers (gyro and accelerometer) more to follow.
  An additional fix was applied on top of this for a build issue
  thrown up by the autobuilders on some platforms.
* Cosmic Circuits 10001 ADC driver
* Qualcomm SPMI PMIC voltage ADC driver (current adc merged a while back).
* Add binding for AK8963 (in capitals) as unfortunately there are bios'
  out there not using lower case.

New functionality
* Add newe operating mode to the core to allow for non triggered software
  buffers.  This is mostly semantics as previously drivers just claimed they
  had a hardware buffer (when they didn't).
* Add distance channel type.
* Add energy channel type.
* Add velocity channel type and IIO_MOD_ROOT_SUM_SQUARED (i.e. speed when
  our channel type is velocity).
* Add _debounce_count and _debounce_time filter attributes.  Only really
  make sense for counting types of measurements.  First use is for avoiding
  miss detection of steps prior to walking.
* Add change event type.   This replaces the briefly present INSTANCE type
  (which hadn't gained any users).  It is more generic as it allows for
  events say every 10 steps rather than every step.
* Add _calibweight attributes to the ABI (and core support).  Used by
  activity monitors to estimate energy use.  Can imagine there will be
  other uses for this one.

Driver new functionality
* mma9551 gains runtime pm support.
* hid-sensors gain PM support.

Cleanup
* Change calibheight unit to m from cm.  As there are no prior users
  and this was inconsistent with other distance units, it makes sense
  to fix it before hte mma9553 driver which uses it.
* mpu6050 cleanups and devm_ use.
* as3935 switch over to PM ops.
* Fix a few format strings for signed vs unsigned.
* Fix tcs3414 missindentation
* Typo in industrialio-event
* Stop requiring IIO_TRIGGER for IIO_KFIFO_BUF as we have drivers that don't
  need it. No one is quite sure why that dependency was there and it
  seems to not matter.

Also change to div64_u64 in one place to avoid loss of precision
(was dividing a 32 bit number by a 64 bit number, but casting this
to 64 bit divided by 32 bit)  Those divide functions certainly have
esoteric naming!

Fixes warnings with asm-generic/div64.h do_div such as:
   In file included from drivers/iio/common/ssp_sensors/ssp_iio.c:20:0:
   drivers/iio/common/ssp_sensors/ssp_iio_sensor.h: In function 'ssp_convert_to_freq':
>> drivers/iio/common/ssp_sensors/ssp_iio_sensor.h:56:16: warning: comparison of distinct pointer types lacks a cast [enabled by default]
   drivers/iio/common/ssp_sensors/ssp_iio_sensor.h:56:2: warning: right shift count >= width of type [enabled by default]
>> drivers/iio/common/ssp_sensors/ssp_iio_sensor.h:56:2: warning: passing argument 1 of '__div64_32' from incompatible pointer type [enabled by default]
   include/asm-generic/div64.h:35:17: note: expected 'uint64_t *' but argument is of type 'int *'
   drivers/iio/common/ssp_sensors/ssp_iio.c: In function 'ssp_common_process_data':
   include/linux/iio/buffer.h:142:32: warning: 'calculated_time' may be used uninitialized in this function [-Wuninitialized]
   drivers/iio/common/ssp_sensors/ssp_iio.c:83:10: note: 'calculated_time' was declared here

Fixed by using straight coded version as per the description in the
div64.h header, thus ensuring no issue with 32 bit integers.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Pull char/misc driver fixes from Greg KH:
 "Here are two tiny patches, one fixing up the drivers/Kconfig file, and
  one adding a MAINTAINERS entry for the UIO git tree"

* tag 'char-misc-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  drivers/Kconfig: remove duplicate entry for soc
  MAINTAINERS: add git url entry for UIO

Pull staging tree fixes from Greg KH:
 "Here are two tiny staging tree fixes.  One for the nvec driver to
  resolve a reported problem, and one to add a MAINTAINERS entry for the
  Android drivers"

* tag 'staging-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  MAINTAINERS: add Android driver entries
  staging: nvec: specify a platform-device base id

Pull USB fixes from Greg KH:
 "Here are some small USB fixes and quirk additions for 3.19-rc7.

  All have been in linux-next for a while with no reported problems"

* tag 'usb-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: Add OTG PET device to TPL
  usb-storage/SCSI: blacklist FUA on JMicron 152d:2566 USB-SATA controller
  uas: Add no-report-opcodes quirk for Simpletech devices with id 4971:8017
  storage: Revise/fix quirk for 04E6:000F SCM USB-SCSI converter
  usb: phy: never defer probe in non-OF case
  usb: dwc2: call dwc2_is_controller_alive() under spinlock