Commit 27c5fd27 ("RDMA/hns: The UD mode can only be configured
with DCQCN") adds a check of congest control alorithm for UD. But
that patch causes a problem: hr_dev->caps.congest_type is global,
used by all QPs, so modifying this field to DCQCN for UD QPs causes
other QPs unable to use any other algorithm except DCQCN.

Revert the modification in commit 27c5fd27 ("RDMA/hns: The UD
mode can only be configured with DCQCN"). Add a new field cong_type
to struct hns_roce_qp and configure DCQCN for UD QPs.

Fixes: 27c5fd27 ("RDMA/hns: The UD mode can only be configured with DCQCN")
Fixes: f91696f2 ("RDMA/hns: Support congestion control type selection according to the FW")
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240219061805.668170-1-huangjunxian6@hisilicon.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

This one is not needed since commit 954afc5a ("RDMA/rxe:
Use members of generic struct in rxe_mr").
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Link: https://lore.kernel.org/r/20240202124144.16033-1-guoqing.jiang@linux.devReviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

Upon rare occasions, KASAN reports a use-after-free Write
in srpt_refresh_port().

This seems to be because an event handler is registered before the
srpt device is fully setup and a race condition upon error may leave a
partially setup event handler in place.

Instead, only register the event handler after srpt device initialization
is complete.

Fixes: a42d985b ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: William Kucharski <william.kucharski@oracle.com>
Link: https://lore.kernel.org/r/20240202091549.991784-2-william.kucharski@oracle.comReviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

Remove the unneeded assignment of the qp_num which is already
set in irdma_create_qp().

Fixes: b48c24c2 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Link: https://lore.kernel.org/r/20240131233953.400483-1-sindhu.devale@intel.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

When creating EQs we take into consideration the max number of EQs the
device reported it can support and the number of available CPUs. There
are situations where the number of EQs the device reported it can
support and the PCI configuration of MSI-X is different, take it in
account as well when creating EQs.
Also request at least 1 MSI-X vector for the management queue and allow
the kernel to return a number of vectors in a range between 1 and the
max supported MSI-X vectors according to the PCI config.
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Reviewed-by: Yonatan Goldhirsh <ygold@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Link: https://lore.kernel.org/r/20240131093403.18624-1-ynachum@amazon.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

mlx5_ib_copy_pas() doesn't exist anymore.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Link: https://lore.kernel.org/r/a2cb861e-d11e-4567-8a73-73763d1dc199@p183Signed-off-by: Leon Romanovsky <leon@kernel.org>

c4iw_ep_redirect() doesn't exist.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Link: https://lore.kernel.org/r/a67881e7-469b-43d9-9973-ad7579eb2c4b@p183Signed-off-by: Leon Romanovsky <leon@kernel.org>

Use a helper function to install callbacks to CQs.
This patch removes code repetition.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1705965781-3235-4-git-send-email-kotaranov@linux.microsoft.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

Use a helper function to access netdevs using a port number.
This patch removes code repetitions as well as removes the need
to explicitly use gdma_dev, which was error-prone.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1705965781-3235-3-git-send-email-kotaranov@linux.microsoft.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

Use a helper function to access gdma_context from mana_ib_dev.
This patch removes code repetitions as well as removes the need
to explicitly use gdma_dev, which was error-prone.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1705965781-3235-2-git-send-email-kotaranov@linux.microsoft.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

'struct hns_roce_hem' is used to refer to the last level of
dma buffer managed by the hw, pointed by a single BA(base
address) in the previous level of BT(base table), so the dma
buffer in 'struct hns_roce_hem' must be contiguous.

Right now the size of dma buffer in 'struct hns_roce_hem' is
decided by mhop->buf_chunk_size in get_hem_table_config(),
which ensure the mhop->buf_chunk_size is power of two of
PAGE_SIZE, so there will be only one contiguous dma buffer
allocated in hns_roce_alloc_hem(), which means hem->chunk_list
and chunk->mem for linking multi dma buffers is unnecessary.

This patch removes the hem->chunk_list and chunk->mem and other
related macro and function accordingly.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240113085935.2838701-7-huangjunxian6@hisilicon.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

In the current implementation, a fixed addressing level is used for
PBL. But in fact, the necessary addressing level is related to page
size and the size of MR.

This patch calculates the addressing level according to page size
and the size of MR, and uses the addressing level to configure the
PBL.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240113085935.2838701-6-huangjunxian6@hisilicon.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

In the current implementation, a fixed page size is used to
configure the umem PBL, which is not flexible enough and is
not conducive to the performance of the HW. Find a best page
size to get better performance.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240113085935.2838701-5-huangjunxian6@hisilicon.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

MTR memory allocation do not depend on allocation of mtt.

This patch moves the allocation of mtr before mtt in preparation for
the following optimization.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240113085935.2838701-4-huangjunxian6@hisilicon.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

page_shift and page_cnt is only used in mtr_map_bufs(). And these
parameter could be calculated indepedently.

Strip the computation of page_shift and page_cnt from mtr_init_buf_cfg(),
reducing the number of parameters of it. This helps reducing coupling
between mtr_init_buf_cfg() and mtr_map_bufs().
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240113085935.2838701-3-huangjunxian6@hisilicon.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

hns_roce_mtr_find() is a collection of multiple functions, and the
return value is also difficult to understand, which is not conducive
to modification and maintenance.

Separate the function of obtaining MTR root BA from this function.
And some adjustments has been made to improve readability.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240113085935.2838701-2-huangjunxian6@hisilicon.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

Utilize the %pe print specifier to get the symbolic error name as a
string (i.e "-ENOMEM") in the log message instead of the error code to
increase its readability.

This change was suggested in
https://lore.kernel.org/all/92972476-0b1f-4d0a-9951-af3fc8bc6e65@suswa.mountain/Signed-off-by: Christian Heusel <christian@heusel.eu>
Link: https://lore.kernel.org/r/20240111141311.987098-1-christian@heusel.euReviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

commit 9ac01f43 ("RDMA/rxe: Extend dbg log messages to err and info")
newly added this info. But it did only show null device when
the rdma_rxe is being loaded because dev_name(rxe->ib_dev->dev)
has not yet been assigned at the moment:

"(null): rxe_set_mtu: Set mtu to 1024"

Remove it to silent this message, check the mtu from it backend link
instead if needed.

CC: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240109083253.3629967-2-lizhijian@fujitsu.comReviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

Previously rxe_{dbg,info,err}() macros are appended built-in newline,
but some users will add redundant newline sometimes. So remove the
built-in newline for these macros.

In terms of rxe_{dbg,info,err}_xxx() macros, because they don't have
built-in newline, append newline when using them.

CC: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Reviewed-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240109083253.3629967-1-lizhijian@fujitsu.comSigned-off-by: Leon Romanovsky <leon@kernel.org>

Fix spelling mistakes as reported by codespell.
Fix kernel-doc warnings.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: linux-rdma@vger.kernel.org
Link: https://lore.kernel.org/r/20240111042754.17530-1-rdunlap@infradead.orgSigned-off-by: Leon Romanovsky <leon@kernel.org>

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

Add line breaks - inode_to_text() is now much easier to read.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs_format.h has gotten too big; let's do some organizing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>