- 19 Sep, 2016 31 commits
-
-
Laurent Pinchart authored
Replace the current boolean parameter (full / !full) with an explicit enum. - VSP1_ENTITY_PARAMS_INIT for parameters to be configured at pipeline initialization time only (V4L2 stream on or DRM atomic update) - VSP1_ENTITY_PARAMS_RUNTIME for all parameters that can be freely modified at runtime (through V4L2 controls) This will allow future extensions when implementing image partitioning support. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Laurent Pinchart authored
The RPF cropping offset for the chroma planes is incorrectly computed, it needs to be divided by the horizontal subsampling factor. Signed-off-by:
-
Laurent Pinchart authored
Cropping on the WPF sink pad restricts the left and top coordinates to 0-255. The same result can be obtained by cropping on the RPF without any such restriction, this feature isn't useful. Disable it. Signed-off-by:
-
Kieran Bingham authored
The DFE and FRE interrupts are both fired at frame completion, as each display list processes a single frame. This won't be true anymore when using image partitioning, switch to DFE in preparation. Signed-off-by:
Kieran Bingham <kieran+renesas@bingham.xyz> Acked-by:
-
Kieran Bingham authored
The frame-end function releases and completes the buffers on the input and output entities of the pipe before marking the pipe->state as 'STOPPED'. This introduces a race whereby with the pipe->state still 'RUNNING', a QBUF handler can commence processing a frame before the frame_end function has completed. In the event that this happens, a frame queued by QBUF hangs due to the incorrect pipe->state setting which prevents vsp1_pipeline_run from issuing a CMD_STRCMD. By locking the entire function we prevent this from occurring, but we also change the locking state of the buffer release code. This has been analysed visually as acceptable, but it must be considered that this now causes the video->irqlock to be taken under the pipe->irqlock context. Signed-off-by:
-
Kieran Bingham authored
The vsp1_pipeline_ready() and vsp1_pipeline_run() functions must be called with the pipeline lock held, fix the resume code path. Signed-off-by:
-
Laurent Pinchart authored
The subdev userspace API isn't serialized in the core, serialize access to formats and selection rectangles in the driver. Signed-off-by:
-
Laurent Pinchart authored
Pipelines can only be run if all their video nodes are streaming. Commit b4dfb9b3 ("[media] v4l: vsp1: Stop the pipeline upon the first STREAMOFF") fixed the pipeline stop sequence, but introduced a race condition that makes it possible to run a pipeline after stopping the stream on a video node by queuing a buffer on the other side of the pipeline. Fix this by clearing the buffers ready flag when stopping the stream, which will prevent the QBUF handler from running the pipeline. Fixes: b4dfb9b3 ("[media] v4l: vsp1: Stop the pipeline upon the first STREAMOFF") Reported-by:
Kieran Bingham <kieran@bingham.xyz> Tested-by:
-
Mauro Carvalho Chehab authored
WARNING: line over 80 characters + GS_HEIGHT_MAX, GS_PIXELCLOCK_MIN, GS_PIXELCLOCK_MAX, WARNING: line over 80 characters + if (v4l2_match_dv_timings(timings, ®_fmt[i].format, 0, false)) WARNING: Block comments use a trailing */ on a separate line + * which looks like a video signal activity.*/ WARNING: else is not generally useful after a break or return + return gs_write_register(gs->pdev, REG_FORCE_FMT, reg_value); + } else { WARNING: Block comments use a trailing */ on a separate line + * which looks like a video signal activity.*/ ERROR: spaces required around that '=' (ctx:VxW) + .enum_dv_timings= gs_enum_dv_timings, ^ Signed-off-by: -
Hans Verkuil authored
The SPI driver looked a bit lonely in the config menu, and it didn't support the autoselect. Shift things around a bit so it looks more logical. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Charles-Antoine Couret authored
You can read datasheet here: http://www.c-dis.net/media/871/GS1662_Datasheet.pdf It's a component which supports HD and SD CEA or SDI formats to SDI output. It's configured through SPI bus. GS1662 driver is implemented as v4l2 subdev. Signed-off-by:
Charles-Antoine Couret <charles-antoine.couret@nexvision.fr> Signed-off-by:
-
Mauro Carvalho Chehab authored
Changeset ab6343956f9c ("[media] V4L2: Add documentation for SDI timings and related flags") added documentation for new V4L2 defines, but it forgot to update videodev2.h.rst.exceptions to point to where the documentation for those new values will be inside the book, causing those warnings: Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-dv-bt-std-sdi (if the link has no caption the label must precede a section header) Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-dv-fl-first-field-extra-line (if the link has no caption the label must precede a section header) Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-in-st-no-v-lock (if the link has no caption the label must precede a section header) Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-in-st-no-std-lock (if the link has no caption the label must precede a section header) Fixes: ab6343956f9c ("[media] V4L2: Add documentation for SDI timings and related flags") Cc: Charles-Antoine Couret <charles-antoine.couret@nexvision.fr> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: -
Charles-Antoine Couret authored
Describe new needed constants defined by SDI format. Signed-off-by:
-
Charles-Antoine Couret authored
Adding others generic flags, which could be used by many components like GS1662. Signed-off-by:
-
Mauro Carvalho Chehab authored
With ReST conversion, the media subsystem documentation is now located on different directories. Update them. Suggested-by:
Joe Perches <joe@perches.com> Cc: LKML <linux-kernel@vger.kernel.org> Cc: linux-doc <linux-doc@vger.kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Wei Yongjun authored
Fix to return error code -ENOMEM from the memory or workqueue alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Wei Yongjun authored
Remove duplicated include. Signed-off-by:
-
Wei Yongjun authored
Fix to return error code -ENODEV from dma_request_slave_channel_compat() error handling case instead of 0, as done elsewhere in this function. Also fix to release resources in v4l2_clk_register() error handling. Signed-off-by:
-
Andrey Utkin authored
tw5864_video_template is used for filling of actual video_device structures. It is copied by value, and is not used for anything else. Signed-off-by:
Andrey Utkin <andrey.utkin@corp.bluecherry.net> Signed-off-by:
-
Andrey Utkin authored
Inspired by "[media] pci: constify vb2_ops structures" patch from Julia Lawall (dated 9 Sep 2016). Signed-off-by:
-
Arnd Bergmann authored
Building with -Wmaybe-uninitialized reveals the use on an uninitialized variable containing the physical address of the device whenever firmware before version 2 is used: drivers/staging/media/pulse8-cec/pulse8-cec.c: In function 'pulse8_connect': drivers/staging/media/pulse8-cec/pulse8-cec.c:447:2: error: 'pa' may be used uninitialized in this function [-Werror=maybe-uninitialized] This sets the address to CEC_PHYS_ADDR_INVALID in this case, so we don't try to write back the uninitialized data to the device. Fixes: e28a6c8b ("[media] pulse8-cec: sync configuration with adapter") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Songjun Wu authored
Set the current format on the first open. Signed-off-by:
Songjun Wu <songjun.wu@microchip.com> Signed-off-by:
-
Jean Delvare authored
MEDIA_CEC is no longer a tristate option, so the user can't actually choose M. Whether the code is built-in or built as a module is decided somewhere else. Fixes: 5bb2399a ("[media] cec: fix Kconfig dependency problems") Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Johan Fjeldtvedt authored
In addition to setting the ACK mask, also set the logical address mask setting in the dongle. This (and not the ACK mask) is persisted for use in autonomous mode. The logical address mask to use is deduced from the primary device type in adap->log_addrs. Signed-off-by:
Johan Fjeldtvedt <jaffe1@gmail.com> Signed-off-by:
-
Hans Verkuil authored
Linux4Linux -> Video4Linux Signed-off-by:
-
Tiffany Lin authored
This patch setting V4L2_CAP_TIMEPERFRAME capability in vidioc_venc_s/g_parm functions Signed-off-by:
Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by:
-
Colin Ian King authored
trivial fix to spelling mistake in pr_debug message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Benjamin Gaignard authored
Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by:
Peter Griffin <peter.griffin@linaro.org> Signed-off-by:
-
Benjamin Gaignard authored
Signed-off-by:
-
Benjamin Gaignard authored
This patch implement CEC driver for stih4xx platform. Driver compliance has been test with cec-ctl and cec-compliance tools. Signed-off-by:
-
Benjamin Gaignard authored
Add bindings documentation for stih-cec driver. Signed-off-by:
-
- 12 Sep, 2016 2 commits
-
-
Hans Verkuil authored
pulse8-cec.c: In function 'pulse8_connect': pulse8-cec.c:447:2: warning: 'pa' may be used uninitialized in this function [-Wmaybe-uninitialized] cec_s_phys_addr(pulse8->adap, pa, false); ^ pulse8-cec.c:609:6: note: 'pa' was declared here u16 pa; ^ As far as I can tell, this can't actually happen. Still, it is better to just initialize it. Signed-off-by: -
Hans Verkuil authored
Linking soc_mediabus into this driver causes multiple definition linker warnings if soc_camera is also enabled: drivers/media/platform/soc_camera/built-in.o:(___ksymtab+soc_mbus_image_size+0x0): multiple definition of `__ksymtab_soc_mbus_image_size' drivers/media/platform/soc_camera/soc_mediabus.o:(___ksymtab+soc_mbus_image_size+0x0): first defined here >> drivers/media/platform/soc_camera/built-in.o:(___ksymtab+soc_mbus_samples_per_pixel+0x0): multiple definition of `__ksymtab_soc_mbus_samples_per_pixel' drivers/media/platform/soc_camera/soc_mediabus.o:(___ksymtab+soc_mbus_samples_per_pixel+0x0): first defined here drivers/media/platform/soc_camera/built-in.o: In function `soc_mbus_config_compatible': (.text+0x3840): multiple definition of `soc_mbus_config_compatible' drivers/media/platform/soc_camera/soc_mediabus.o:(.text+0x134): first defined here Since we really don't want to have to use any of the soc-camera code this patch copies the relevant code and data structures from soc_mediabus and renames it to pxa_mbus_*. The large table of formats has been culled a bit, removing formats that are not supported by this driver. Signed-off-by:
-
- 09 Sep, 2016 7 commits
-
-
Sergei Shtylyov authored
Add support for the R8A7792 VSP1V cores which are different from the other gen2 VSP1 cores. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Laurent Pinchart authored
The vsp1 driver supports tri-planar formats, but the DRM API only passes two memory addresses. Add a third one. Signed-off-by:
-
Laurent Pinchart authored
Instead of hardcoding the media device model and hardware revision to "VSP1" and 0 respectively, report the actual hardware device model and IP version number. Signed-off-by:
-
Kieran Bingham authored
The FCP must be powered up for the FDP1 to function, even when the FDP1 does not make use of the FCNL features. Extend the compatible list to allow us to use the power domain and runtime-pm support. Signed-off-by:
-
Laurent Pinchart authored
The rcar_fcp_enable() function immediately returns successfully when the FCP device pointer is NULL to avoid forcing the users to check the FCP device manually before every call. However, the stub version of the function used when the FCP driver is disabled returns -ENOSYS unconditionally, resulting in a different API contract for the two versions of the function. As a user that requires FCP support will fail at probe time when calling rcar_fcp_get() if the FCP driver is disabled, the stub version of the rcar_fcp_enable() function will only be called with a NULL FCP device. We can thus return 0 unconditionally to align the behaviour with the normal version of the function. Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Laurent Pinchart authored
The Renesas multimedia drivers use ret to store return values, fix the only exception in the rcar-fcp driver to keep the coding style consistent. Signed-off-by:
-
Laurent Pinchart authored
The S_FMT and TRY_FMT handlers in multiplane mode attempt at clearing the reserved fields of the v4l2_format structure after the pix_mp member. However, the reserved fields are inside pix_mp, not after it. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
