- 20 Mar, 2020 10 commits
-
-
Amit Kucheria authored
TSENS IP v2.3 onwards adds support for a watchdog to detect if the TSENS HW FSM is stuck. Add support to detect and restart the FSM in the driver. The watchdog is configured by the bootloader, we just enable the watchdog bark as a debug feature in the kernel. Signed-off-by:
Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/a314747664a065db592ad77da7beae68128a5b6e.1584015867.git.amit.kucheria@linaro.org
-
Amit Kucheria authored
TSENS IP v2.x adds critical threshold interrupt support for each sensor in addition to the upper/lower threshold interrupt. Add support in the driver. While the critical interrupts themselves aren't currently used by Linux, the HW line is also used by the TSENS watchdog. So this patch acts as infrastructure to enable watchdog functionality for the TSENS IP. Signed-off-by:
-
Amit Kucheria authored
We don't currently call put_device in case of successfully initialising the device. So we hold the reference and keep the device pinned forever. Allow control to fall through so we can use same code for success and error paths to put_device. As a part of this fixup, change devm_ioremap_resource to act on the same device pointer as that used to allocate regmap memory. That ensures that we are free to release op->dev after examining its resources. Signed-off-by:
-
Amit Kucheria authored
We already dereference the sensor and save it into a variable. Use the variable directly to make the code easier to read. Signed-off-by:
-
Amit Kucheria authored
All the sensor data is initialised at init time. Lock it down by passing it to functions as a constant. Signed-off-by:
-
Amit Kucheria authored
struct tsens_features is currently initialized as part of platform data at compile-time and not modifiable. We now have some usecases in feature detection across IP versions where it is more flexible to update the features after probing registers. Remove const qualifier from tsens_features and the encapsulating tsens_plat_data. Signed-off-by:
-
Niklas Söderlund authored
If the common register memory resource is not available the driver needs to fail gracefully to disable PM. Instead of returning the error directly store it in ret and use the already existing error path. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Anson Huang authored
Remove unused includes to simplify the code. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Signed-off-by:
-
Geert Uytterhoeven authored
Add support for the Thermal Sensor/Chip Internal Voltage Monitor in the R-Car M3-W+ (R8A77961) SoC. According to the R-Car Gen3 Hardware Manual Errata for Revision 2.00 of Jan 31, 2020, the thermal parameters for R-Car M3-W+ are the same as for R-Car M3-W. Signed-off-by:
-
Geert Uytterhoeven authored
Document R-Car M3-W+ (R8A77961) SoC bindings. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 12 Mar, 2020 18 commits
-
-
Anson Huang authored
Add COMPILE_TEST support to i.MX8MM thermal driver for better compile testing coverage. Signed-off-by:
-
Yuantian Tang authored
Qoriq thermal driver is used by both PowerPC and ARM architecture. When built for PowerPC architecture, it reports error: undefined reference to `.__devm_regmap_init_mmio_clk' To fix it, select config REGMAP_MMIO. Fixes: 4316237b (thermal: qoriq: Convert driver to use regmap API) Signed-off-by:
Yuantian Tang <andy.tang@nxp.com> Signed-off-by:
-
Anson Huang authored
i.MX SCU thermal driver depends on IMX_SCU which does NOT have COMPILE_TEST enabled, so need to remove COMPILE_TEST for i.MX SCU thermal as well. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Anson Huang authored
Add "inline" to thermal_zone_of_get_sensor_id() function to avoid below build warning of !defined(CONFIG_THERMAL_OF). In file included from drivers/hwmon/hwmon.c:22: include/linux/thermal.h:382:12: warning: 'thermal_zone_of_get_sensor_id' defined but not used [-Wunused-function] 382 | static int thermal_zone_of_get_sensor_id(struct device_node *tz_np, Signed-off-by:
-
Anson Huang authored
Use __maybe_unused for power management related functions instead of #if CONFIG_PM_SLEEP to simplify the code. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Anson Huang authored
The i.MX SCU API strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs, use __packed __aligned(4) to avoid potential oopses. Signed-off-by:
-
Linus Walleij authored
This switches the TI SoC thermal driver to use GPIO descriptors instead of retrieveing a GPIO number from the device tree and requesting the GPIO separately. Cc: Keerthy <j-keerthy@ti.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
The thermal subsystem may have relied on sysfs in 2008 when it was introduced, but these days the thermal zones will more often than not come from the hardware descriptions and not from sysfs. Drop the "Generic" phrases as well: there are no non-generic drivers that I know of, the thermal framework is by definition generic. Reword a bit and fix some grammar. [ Daniel Lezcano ] : fixed Randy's comment s/offers/offer/ Signed-off-by:
-
Anson Huang authored
i.MX8MM has a thermal monitoring unit(TMU) inside, it ONLY has one sensor for CPU, add support for reading immediate temperature of this sensor. Signed-off-by:
-
Anson Huang authored
Add thermal binding doc for Freescale's i.MX8MM Thermal Monitoring Unit. Signed-off-by:
-
Marek Szyprowski authored
Don't confuse user with meaningless warning about the failure of registering sensors in case of deferred probe. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Anson Huang authored
i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller inside, the system controller is in charge of controlling power, clock and thermal sensors etc.. This patch adds i.MX system controller thermal driver support, Linux kernel has to communicate with system controller via MU (message unit) IPC to get each thermal sensor's temperature, it supports multiple sensors which are passed from device tree, please see the binding doc for details. Signed-off-by:
-
Anson Huang authored
This patch adds new API thermal_zone_of_get_sensor_id() to provide the feature of getting sensor ID from DT thermal zone's node. It's useful for thermal driver to register the specific thermal zone devices from DT in a common way. Signed-off-by:
Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by:
-
Anson Huang authored
NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as system controller, the system controller is in charge of system power, clock and thermal sensors etc. management, Linux kernel has to communicate with system controller via MU (message unit) IPC to get temperature from thermal sensors, this patch adds binding doc for i.MX system controller thermal driver. Signed-off-by:
-
Freeman Liu authored
This patch adds the support for Spreadtrum thermal sensor controller, which can support maximum 8 sensors. Signed-off-by:
Freeman Liu <freeman.liu@unisoc.com> Co-developed-with: Baolin Wang <baolin.wang@unisoc.com> Signed-off-by:
Baolin Wang <baolin.wang7@gmail.com> Signed-off-by:
-
Baolin Wang authored
Add the Spreadtrum thermal documentation. Signed-off-by:
Baolin Wang <baolin.wang@unisoc.com> Signed-off-by:
-
Niklas Söderlund authored
The desired behavior of the driver is to generate an interrupt and call thermal_zone_device_update() as soon as the temperature have changed more then one degree. When the set_trips operation was implemented it was believed that the trip window set by the framework would move around the current temperature and the hysteresis value described in devicetree. The behavior of the framework is however to set a window based on the trip points described in devicetree. Remove the set_trips operation which was not used correctly and update the temperatures that triggers interrupts directly from the interrupt handler. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Niklas Söderlund authored
When devm_add_action() was turned into devm_add_action_or_reset() the curly brackets for the error case where kept but are not needed, remove them to match the style of the driver. Signed-off-by:
-
- 29 Feb, 2020 1 commit
-
-
Rajeshwari authored
Added configuration in dt-bindings for SC7180. Signed-off-by:
Rajeshwari <rkambl@codeaurora.org> Reviewed-by:
-
- 24 Feb, 2020 1 commit
-
-
Linus Torvalds authored
-
- 23 Feb, 2020 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "These are fixes that were found during testing with help of error injection, plus some other stable material. There's a fixup to patch added to rc1 causing locking in wrong context warnings, tests found one more deadlock scenario. The patches are tagged for stable, two of them now in the queue but we'd like all three released at the same time. I'm not happy about fixes to fixes in such a fast succession during rcs, but I hope we found all the fallouts of commit 28553fa9 ('Btrfs: fix race between shrinking truncate and fiemap')" * tag 'for-5.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix deadlock during fast fsync when logging prealloc extents beyond eof Btrfs: fix btrfs_wait_ordered_range() so that it waits for all ordered extents btrfs: fix bytes_may_use underflow in prealloc error condtition btrfs: handle logged extent failure properly btrfs: do not check delayed items are empty for single transaction cleanup btrfs: reset fs_root to NULL on error in open_ctree btrfs: destroy qgroup extent records on transaction abort
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "More miscellaneous ext4 bug fixes (all stable fodder)" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix mount failure with quota configured as module jbd2: fix ocfs2 corrupt when clearing block group bits ext4: fix race between writepages and enabling EXT4_EXTENTS_FL ext4: rename s_journal_flag_rwsem to s_writepages_rwsem ext4: fix potential race between s_flex_groups online resizing and access ext4: fix potential race between s_group_info online resizing and access ext4: fix potential race between online resizing and write operations ext4: add cond_resched() to __ext4_find_entry() ext4: fix a data race in EXT4_I(inode)->i_disksize
-
git://github.com/c-sky/csky-linuxLinus Torvalds authored
Pull csky updates from Guo Ren: "Sorry, I missed 5.6-rc1 merge window, but in this pull request the most are the fixes and the rests are between fixes and features. The only outside modification is the MAINTAINERS file update with our mailing list. - cache flush implementation fixes - ftrace modify panic fix - CONFIG_SMP boot problem fix - fix pt_regs saving for atomic.S - fix fixaddr_init without highmem. - fix stack protector support - fix fake Tightly-Coupled Memory code compile and use - fix some typos and coding convention" * tag 'csky-for-linus-5.6-rc3' of git://github.com/c-sky/csky-linux: (23 commits) csky: Replace <linux/clk-provider.h> by <linux/of_clk.h> csky: Implement copy_thread_tls csky: Add PCI support csky: Minimize defconfig to support buildroot config.fragment csky: Add setup_initrd check code csky: Cleanup old Kconfig options arch/csky: fix some Kconfig typos csky: Fixup compile warning for three unimplemented syscalls csky: Remove unused cache implementation csky: Fixup ftrace modify panic csky: Add flush_icache_mm to defer flush icache all csky: Optimize abiv2 copy_to_user_page with VM_EXEC csky: Enable defer flush_dcache_page for abiv2 cpus (807/810/860) csky: Remove unnecessary flush_icache_* implementation csky: Support icache flush without specific instructions csky/Kconfig: Add Kconfig.platforms to support some drivers csky/smp: Fixup boot failed when CONFIG_SMP csky: Set regs->usp to kernel sp, when the exception is from kernel csky/mm: Fixup export invalid_pte_table symbol csky: Separate fixaddr_init from highmem ...
-
Geert Uytterhoeven authored
The C-Sky platform code is not a clock provider, and just needs to call of_clk_init(). Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>. Signed-off-by:
Guo Ren <guoren@linux.alibaba.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RAS fixes from Thomas Gleixner: "Two fixes for the AMD MCE driver: - Populate the per CPU MCA bank descriptor pointer only after it has been completely set up to prevent a use-after-free in case that one of the subsequent initialization step fails - Implement a proper release function for the sysfs entries of MCA threshold controls instead of freeing the memory right in the CPU teardown code, which leads to another use-after-free when the associated sysfs file is opened and accessed" * tag 'ras-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce/amd: Fix kobject lifetime x86/mce/amd: Publish the bank pointer only after setup has succeeded -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "Two fixes for the irq core code which are follow ups to the recent MSI fixes: - The WARN_ON which was put into the MSI setaffinity callback for paranoia reasons actually triggered via a callchain which escaped when all the possible ways to reach that code were analyzed. The proc/irq/$N/*affinity interfaces have a quirk which came in when ALPHA moved to the generic interface: In case that the written affinity mask does not contain any online CPU it calls into ALPHAs magic auto affinity setting code. A few years later this mechanism was also made available to x86 for no good reasons and in a way which circumvents all sanity checks for interrupts which cannot have their affinity set from process context on X86 due to the way the X86 interrupt delivery works. It would be possible to make this work properly, but there is no point in doing so. If the interrupt is not yet started then the affinity setting has no effect and if it is started already then it is already assigned to an online CPU so there is no point to randomly move it to some other CPU. Just return EINVAL as the code has done before that change forever. - The new MSI quirk bit in the irq domain flags turned out to be already occupied, which escaped the author and the reviewers because the already in use bits were 0,6,2,3,4,5 listed in that order. That bit 6 was simply overlooked because the ordering was straight forward linear otherwise. So the new bit ended up being a duplicate. Fix it up by switching the oddball 6 to the obvious 1" * tag 'irq-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/irqdomain: Make sure all irq domain flags are distinct genirq/proc: Reject invalid affinity masks (again) -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Two fixes for x86: - Remove the __force_oder definiton from the kaslr boot code as it is already defined in the page table code which makes GCC 10 builds fail because it changed the default to -fno-common. - Address the AMD erratum 1054 concerning the IRPERF capability and enable the Instructions Retired fixed counter on machines which are not affected by the erratum" * tag 'x86-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF x86/boot/compressed: Don't declare __force_order in kaslr_64.c
-
- 22 Feb, 2020 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefsLinus Torvalds authored
Pull zonefs fix from Damien Le Moal: "A single patch fixing typos in the documentation file" * tag 'zonefs-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: fix documentation typos etc.
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "Here's a small collection of fixes that were queued up: - Remove unnecessary NULL check (Dan) - Missing io_req_cancelled() call in fallocate (Pavel) - Put the cleanup check for aux data in the right spot (Pavel) - Two fixes for SQPOLL (Stefano, Xiaoguang)" * tag 'io_uring-5.6-2020-02-22' of git://git.kernel.dk/linux-block: io_uring: fix __io_iopoll_check deadlock in io_sq_thread io_uring: prevent sq_thread from spinning when it should stop io_uring: fix use-after-free by io_cleanup_req() io_uring: remove unnecessary NULL checks io_uring: add missing io_req_cancelled()
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Just a set of NVMe fixes via Keith" * tag 'block-5.6-2020-02-22' of git://git.kernel.dk/linux-block: nvme-multipath: Fix memory leak with ana_log_buf nvme: Fix uninitialized-variable warning nvme-pci: Use single IRQ vector for old Apple models nvme/pci: Add sleep quirk for Samsung and Toshiba drives
-
