- 24 Oct, 2011 5 commits
-
-
Eric W. Biederman authored
Renato Westphal noticed that since commit a2835763 "rtnetlink: handle rtnl_link netlink notifications manually" was merged we no longer send a netlink message when a networking device is moved from one network namespace to another. Fix this by adding the missing manual notification in dev_change_net_namespaces. Since all network devices that are processed by dev_change_net_namspaces are in the initialized state the complicated tests that guard the manual rtmsg_ifinfo calls in rollback_registered and register_netdevice are unnecessary and we can just perform a plain notification. Cc: stable@kernel.org Tested-by: Renato Westphal <renatowestphal@gmail.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yan, Zheng authored
There is bug in commit 5e2b61f7(ipv4: Remove flowi from struct rtable). It makes xfrm4_fill_dst() modify wrong data structure. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Reported-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Clemens Buchacher authored
If the device is down during suspend/resume, interrupts are enabled without a registered interrupt handler, causing a storm of unhandled interrupts until the IRQ is disabled because "nobody cared". Instead, check that the device is up before touching it in the suspend/resume code. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=39112Helped-by: Adrian Chadd <adrian@freebsd.org> Helped-by: Mohammed Shafi <shafi.wireless@gmail.com> Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Flavio Leitner authored
The commit f39925db (ipv4: Cache learned redirect information in inetpeer.) removed some ICMP packet validations which are required by RFC 1122, section 3.2.2.2: ... A Redirect message SHOULD be silently discarded if the new gateway address it specifies is not on the same connected (sub-) net through which the Redirect arrived [INTRO:2, Appendix A], or if the source of the Redirect is not the current first-hop gateway for the specified destination (see Section 3.3.1). Signed-off-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Richard Cochran authored
The pair of functions, * skb_clone_tx_timestamp() * skb_complete_tx_timestamp() were designed to allow timestamping in PHY devices. The first function, called during the MAC driver's hard_xmit method, identifies PTP protocol packets, clones them, and gives them to the PHY device driver. The PHY driver may hold onto the packet and deliver it at a later time using the second function, which adds the packet to the socket's error queue. As pointed out by Johannes, nothing prevents the socket from disappearing while the cloned packet is sitting in the PHY driver awaiting a timestamp. This patch fixes the issue by taking a reference on the socket for each such packet. In addition, the comments regarding the usage of these function are expanded to highlight the rule that PHY drivers must use skb_complete_tx_timestamp() to release the packet, in order to release the socket reference, too. These functions first appeared in v2.6.36. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Cc: <stable@vger.kernel.org> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 22 Oct, 2011 1 commit
-
-
Eric Dumazet authored
Ari got kernel panics using tg3 NIC, and bisected to 2669069a "tg3: enable transmit time stamping." This is because tigon3_dma_hwbug_workaround() might alloc a new skb and free the original. We panic when skb_tx_timestamp() is called on freed skb. Reported-by: Ari Savolainen <ari.m.savolainen@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 20 Oct, 2011 5 commits
-
-
-
Eric Dumazet authored
It seems ip_gre is able to change dev->needed_headroom on the fly. Its is not legal unfortunately and triggers a BUG in raw_sendmsg() skb = sock_alloc_send_skb(sk, ... + LL_ALLOCATED_SPACE(rt->dst.dev) < another cpu change dev->needed_headromm (making it bigger) ... skb_reserve(skb, LL_RESERVED_SPACE(rt->dst.dev)); We end with LL_RESERVED_SPACE() being bigger than LL_ALLOCATED_SPACE() -> we crash later because skb head is exhausted. Bug introduced in commit 243aad83 in 2.6.34 (ip_gre: include route header_len in max_headroom calculation) Reported-by: Elmar Vonlanthen <evonlanthen@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Timo Teräs <timo.teras@iki.fi> CC: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Add alignment flag to PCI expansion resources sparc: Avoid calling sigprocmask() sparc: Use set_current_blocked() sparc32,leon: SRMMU MMU Table probe fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: fib_rules: fix unresolved_rules counting r8169: fix wrong eee setting for rlt8111evl r8169: fix driver shutdown WoL regression. ehea: Change maintainer to me pptp: pptp_rcv_core() misses pskb_may_pull() call tproxy: copy transparent flag when creating a time wait pptp: fix skb leak in pptp_xmit() bonding: use local function pointer of bond->recv_probe in bond_handle_frame smsc911x: Add support for SMSC LAN89218 tg3: negate USE_PHYLIB flag check netconsole: enable netconsole can make net_device refcnt incorrent bluetooth: Properly clone LSM attributes to newly created child connections l2tp: fix a potential skb leak in l2tp_xmit_skb() bridge: fix hang on removal of bridge via netlink x25: Prevent skb overreads when checking call user data x25: Handle undersized/fragmented skbs x25: Validate incoming call user data lengths udplite: fast-path computation of checksum coverage IPVS netns shutdown/startup dead-lock netfilter: nf_conntrack: fix event flooding in GRE protocol tracker
-
Hugh Dickins authored
I don't usually pay much attention to the stale "? " addresses in stack backtraces, but this lucky report from Pawel Sikora hints that mremap's move_ptes() has inadequate locking against page migration. 3.0 BUG_ON(!PageLocked(p)) in migration_entry_to_page(): kernel BUG at include/linux/swapops.h:105! RIP: 0010:[<ffffffff81127b76>] [<ffffffff81127b76>] migration_entry_wait+0x156/0x160 [<ffffffff811016a1>] handle_pte_fault+0xae1/0xaf0 [<ffffffff810feee2>] ? __pte_alloc+0x42/0x120 [<ffffffff8112c26b>] ? do_huge_pmd_anonymous_page+0xab/0x310 [<ffffffff81102a31>] handle_mm_fault+0x181/0x310 [<ffffffff81106097>] ? vma_adjust+0x537/0x570 [<ffffffff81424bed>] do_page_fault+0x11d/0x4e0 [<ffffffff81109a05>] ? do_mremap+0x2d5/0x570 [<ffffffff81421d5f>] page_fault+0x1f/0x30 mremap's down_write of mmap_sem, together with i_mmap_mutex or lock, and pagetable locks, were good enough before page migration (with its requirement that every migration entry be found) came in, and enough while migration always held mmap_sem; but not enough nowadays, when there's memory hotremove and compaction. The danger is that move_ptes() lets a migration entry dodge around behind remove_migration_pte()'s back, so it's in the old location when looking at the new, then in the new location when looking at the old. Either mremap's move_ptes() must additionally take anon_vma lock(), or migration's remove_migration_pte() must stop peeking for is_swap_entry() before it takes pagetable lock. Consensus chooses the latter: we prefer to add overhead to migration than to mremapping, which gets used by JVMs and by exec stack setup. Reported-and-tested-by: Paweł Sikora <pluto@agmk.net> Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 19 Oct, 2011 19 commits
-
-
Kjetil Oftedal authored
Currently no type of alignment is specified for PCI expansion roms while parsing the openfirmware tree. This causes calls to pci_map_rom() to fail. IORESOURCE_SIZEALIGN is the default alignment used for rom resouces in pci/probe.c, and has been verified to work with various cards on a ultra 10. Signed-off-By: Kjetil Oftedal <oftedal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yan, Zheng authored
we should decrease ops->unresolved_rules when deleting a unresolved rule. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
hayeswang authored
Correct the wrong parameter for setting EEE for RTL8111E-VL. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
françois romieu authored
Due to commit 92fc43b4 ("r8169: modify the flow of the hw reset."), rtl8169_hw_reset stomps during driver shutdown on RxConfig bits which are needed for WOL on some versions of the hardware. As these bits were formerly set from the r81{0x, 68}_pll_power_down methods, factor them out for use in the driver shutdown (rtl_shutdown) handler. I favored __rtl8169_get_wol() -hardware state indication- over RTL_FEATURE_WOL as the latter has become a good candidate for removal. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com> Tested-by: Marc Ballarin <ballarin.marc@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thadeu Lima de Souza Cascardo authored
Breno Leitao has passed the maintainership to me. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Breno Leitao <leitao@linux.vnet.ibm.com> Acked-by: Breno Leitão <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://linuxtv.org/mchehab/for_linusLinus Torvalds authored
* 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus: [media] videodev: fix a NULL pointer dereference in v4l2_device_release()
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms/atom: fix handling of FB scratch indices drm/radeon/kms/DCE4.1: fix Select_CrtcSource EncodeMode setting for DP bridges (v2) drm/radeon/kms/DCE4.1: ss is not supported on the internal pplls drm/radeon/kms/DCE4.1: fix dig encoder to transmitter mapping ttm: Fix error-path using an uninitialized value
-
Antonio Ospite authored
The change in 8280b662 does not cover the case when v4l2_dev is already NULL, fix that. With a Kinect sensor, seen as an USB camera using GSPCA in this context, a NULL pointer dereference BUG can be triggered by just unplugging the device after the camera driver has been loaded. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-
Alex Deucher authored
FB scratch indices are dword indices, but we were treating them as byte indices. As such, we were getting the wrong FB scratch data for non-0 indices. Fix the indices and guard the indexing against indices larger than the scratch allocation. Fixes memory corruption on some boards if data was written past the end of the FB scratch array. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: Dave Airlie <airlied@redhat.com> Tested-by: Dave Airlie <airlied@redhat.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Eric Dumazet authored
e1000e uses paged frags, so any layer incorrectly pulling bytes from skb can trigger a BUG in skb_pull() [951.142737] [<ffffffff813d2f36>] skb_pull+0x15/0x17 [951.142737] [<ffffffffa0286824>] pptp_rcv_core+0x126/0x19a [pptp] [951.152725] [<ffffffff813d17c4>] sk_receive_skb+0x69/0x105 [951.163558] [<ffffffffa0286993>] pptp_rcv+0xc8/0xdc [pptp] [951.165092] [<ffffffffa02800a3>] gre_rcv+0x62/0x75 [gre] [951.165092] [<ffffffff81410784>] ip_local_deliver_finish+0x150/0x1c1 [951.177599] [<ffffffff81410634>] ? ip_local_deliver_finish+0x0/0x1c1 [951.177599] [<ffffffff81410846>] NF_HOOK.clone.7+0x51/0x58 [951.177599] [<ffffffff81410996>] ip_local_deliver+0x51/0x55 [951.177599] [<ffffffff814105b9>] ip_rcv_finish+0x31a/0x33e [951.177599] [<ffffffff8141029f>] ? ip_rcv_finish+0x0/0x33e [951.204898] [<ffffffff81410846>] NF_HOOK.clone.7+0x51/0x58 [951.214651] [<ffffffff81410bb5>] ip_rcv+0x21b/0x246 pptp_rcv_core() is a nice example of a function assuming everything it needs is available in skb head. Reported-by: Bradley Peterson <despite@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
KOVACS Krisztian authored
The transparent socket option setting was not copied to the time wait socket when an inet socket was being replaced by a time wait socket. This broke the --transparent option of the socket match and may have caused that FIN packets belonging to sockets in FIN_WAIT2 or TIME_WAIT state were being dropped by the packet filter. Signed-off-by: KOVACS Krisztian <hidden@balabit.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
In case we cant transmit skb, we must free it Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Dmitry Kozlov <xeb@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mitsuo Hayasaka authored
The bond->recv_probe is called in bond_handle_frame() when a packet is received, but bond_close() sets it to NULL. So, a panic occurs when both functions work in parallel. Why this happen: After null pointer check of bond->recv_probe, an sk_buff is duplicated and bond->recv_probe is called in bond_handle_frame. So, a panic occurs when bond_close() is called between the check and call of bond->recv_probe. Patch: This patch uses a local function pointer of bond->recv_probe in bond_handle_frame(). So, it can avoid the null pointer dereference. Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Phil Edworthy authored
LAN89218 is register compatible with LAN911x. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
USE_PHYLIB flag in tg3_remove_one() is being checked incorrectly. This results tg3_phy_fini->phy_disconnect is never called and when tg3 module is removed. In my case this resulted in panics in phy_state_machine calling function phydev->adjust_link. So correct this check. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gao feng authored
There is no check if netconsole is enabled current. so when exec echo 1 > enabled; the reference of net_device will increment always. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Moore authored
The Bluetooth stack has internal connection handlers for all of the various Bluetooth protocols, and unfortunately, they are currently lacking the LSM hooks found in the core network stack's connection handlers. I say unfortunately, because this can cause problems for users who have have an LSM enabled and are using certain Bluetooth devices. See one problem report below: * http://bugzilla.redhat.com/show_bug.cgi?id=741703 In order to keep things simple at this point in time, this patch fixes the problem by cloning the parent socket's LSM attributes to the newly created child socket. If we decide we need a more elaborate LSM marking mechanism for Bluetooth (I somewhat doubt this) we can always revisit this decision in the future. Reported-by: James M. Cape <jcape@ignore-your.tv> Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
l2tp_xmit_skb() can leak one skb if skb_cow_head() returns an error. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Need to cleanup bridge device timers and ports when being bridge device is being removed via netlink. This fixes the problem of observed when doing: ip link add br0 type bridge ip link set dev eth1 master br0 ip link set br0 up ip link del br0 which would cause br0 to hang in unregister_netdev because of leftover reference count. Reported-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 18 Oct, 2011 8 commits
-
-
Antonio Quartulli authored
In the TT_RESPONSE packet, the number of carried entries is not correctly set. This leads to a wrong interpretation of the packet payload on the receiver side causing random entries to be added to the global translation table. Therefore the latter gets always corrupted, triggering a table recovery all the time. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
-
Antonio Quartulli authored
Currently the counter of tt_local_entry structures (tt_local_num) is incremented each time the tt_local_reset_flags() is invoked causing the node to send wrong TT_REPONSE packets containing a copy of non-initialised memory thus corrupting other nodes global translation table and making higher level communication impossible. Reported-by: Junkeun Song <jun361@gmail.com> Signed-off-by: Antonio Quartulli <ordex@autistici.org> Acked-by: Junkeun Song <jun361@gmail.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
-
Peter Zijlstra authored
There's a lock inversion between the cputimer->lock and rq->lock; notably the two callchains involved are: update_rlimit_cpu() sighand->siglock set_process_cpu_timer() cpu_timer_sample_group() thread_group_cputimer() cputimer->lock thread_group_cputime() task_sched_runtime() ->pi_lock rq->lock scheduler_tick() rq->lock task_tick_fair() update_curr() account_group_exec() cputimer->lock Where the first one is enabling a CLOCK_PROCESS_CPUTIME_ID timer, and the second one is keeping up-to-date. This problem was introduced by e8abccb7 ("posix-cpu-timers: Cure SMP accounting oddities"). Cure the problem by removing the cputimer->lock and rq->lock nesting, this leaves concurrent enablers doing duplicate work, but the time wasted should be on the same order otherwise wasted spinning on the lock and the greater-than assignment filter should ensure we preserve monotonicity. Reported-by: Dave Jones <davej@redhat.com> Reported-by: Simon Kirby <sim@hostway.ca> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: stable@kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/1318928713.21167.4.camel@twinsSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Alex Deucher authored
Settings in this table reflect the physical panel/connector rather than the internal dig encoding. v2: fix typo for DRM_MODE_CONNECTOR_VGA case. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
It's handled via external clock. It should already be protected by the external ss flag, but add an explicit check just in case. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
llano has fully routeable dig encoders similar to DCE3.2 while ontario has a hardcoded mapping similar to DCE4.0. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Thomas Hellstrom authored
Pointed out by Michel Daenzer. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Linus Torvalds authored
-
- 17 Oct, 2011 2 commits
-
-
git://1984.lsi.us.es/netDavid S. Miller authored
-
Matthew Daley authored
x25_find_listener does not check that the amount of call user data given in the skb is big enough in per-socket comparisons, hence buffer overreads may occur. Fix this by adding a check. Signed-off-by: Matthew Daley <mattjd@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Cc: stable <stable@kernel.org> Acked-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-