- 11 May, 2016 6 commits
-
-
Hannes Reinecke authored
Some arrays / HBAs will only present T10 vendor IDs, so we should be decoding them, too. [mkp: Fixed T10 spelling] Suggested-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
Hannes Reinecke <hare@suse.com> Tested-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
Not every device will return a useable VPD identification, but still might support ALUA. Rather than disable ALUA support we should be allowing the device identification to be empty and attach individual ALUA device handler to each devices. [mkp: Fixed typo reported by Bart] Reported-by:
-
Douglas Gilbert authored
For reported SAS addresses replace fake IEEE registered NAAs (5) with locally assigned NAAs (3). Signed-off-by:
Douglas Gilbert <dgilbert@interlog.com> Reviewed-by:
-
Douglas Gilbert authored
Permit changing of a LU name from a (fake) IEEE registered NAA (5) to a locally assigned UUID. Using a UUID (RFC 4122) for a SCSI designation descriptor (e.g. a LU name) was added in spc5r08.pdf (a draft INCITS standard) on 25 January 2016. Add parameter uuid_ctl to use a separate UUID for each LU (storage device) name. Additional option for all LU names to have the same UUID (since their storage is shared). Previous action of using NAA identifier for LU name remains the default. Signed-off-by:
-
Douglas Gilbert authored
Cleanup some mode and vpd pages. Stop reporting SBC (disk) pages when peripheral type is something else (e.g. tape). Update version descriptors. Expand LBPRZ flag handling. Signed-off-by:
-
Douglas Gilbert authored
Add submit_queue parameter (minimum and default: 1; maximum: nr_cpu_ids) that controls how many queues are built, each with their own lock and in_use bit vector. Add statistics parameter which is default off. Signed-off-by:
-
- 10 May, 2016 1 commit
-
-
Dan Carpenter authored
The caller assumes that "itnim" is NULL on error and non-NULL on success but really "itnim" is uninitialized on error. This function should just use normal error handling where it returns zero on success and negative on failure. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Anil Gurumurthy <anil.gurumurthy@qlogic.com> Signed-off-by:
-
- 06 May, 2016 2 commits
-
-
Andy Lutomirski authored
I actually read the error messages in my logs, and successful initialization is not an error. Arguably these log lines could be deleted entirely. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Reviewed-by:
Hannes Reinicke <hare@suse.de> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
-
Manoj N. Kumar authored
When a cxlflash adapter goes into EEH recovery and multiple processes (each having established its own context) are active, the EEH recovery can hang if the processes attempt to recover in parallel. The symptom logged after a couple of minutes is: INFO: task eehd:48 blocked for more than 120 seconds. Not tainted 4.5.0-491-26f710d+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. eehd 0 48 2 Call Trace: __switch_to+0x2f0/0x410 __schedule+0x300/0x980 schedule+0x48/0xc0 rwsem_down_write_failed+0x294/0x410 down_write+0x88/0xb0 cxlflash_pci_error_detected+0x100/0x1c0 [cxlflash] cxl_vphb_error_detected+0x88/0x110 [cxl] cxl_pci_error_detected+0xb0/0x1d0 [cxl] eeh_report_error+0xbc/0x130 eeh_pe_dev_traverse+0x94/0x160 eeh_handle_normal_event+0x17c/0x450 eeh_handle_event+0x184/0x370 eeh_event_handler+0x1c8/0x1d0 kthread+0x110/0x130 ret_from_kernel_thread+0x5c/0xa4 INFO: task blockio:33215 blocked for more than 120 seconds. Not tainted 4.5.0-491-26f710d+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. blockio 0 33215 33213 Call Trace: 0x1 (unreliable) __switch_to+0x2f0/0x410 __schedule+0x300/0x980 schedule+0x48/0xc0 rwsem_down_read_failed+0x124/0x1d0 down_read+0x68/0x80 cxlflash_ioctl+0x70/0x6f0 [cxlflash] scsi_ioctl+0x3b0/0x4c0 sg_ioctl+0x960/0x1010 do_vfs_ioctl+0xd8/0x8c0 SyS_ioctl+0xd4/0xf0 system_call+0x38/0xb4 INFO: task eehd:48 blocked for more than 120 seconds. The hang is because of a 3 way dead-lock: Process A holds the recovery mutex, and waits for eehd to complete. Process B holds the semaphore and waits for the recovery mutex. eehd waits for semaphore. The fix is to have Process B above release the semaphore before attempting to acquire the recovery mutex. This will allow eehd to proceed to completion. Signed-off-by:
Manoj N. Kumar <manoj@linux.vnet.ibm.com> Reviewed-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by:
-
- 04 May, 2016 2 commits
-
-
Douglas Gilbert authored
Based on "[PATH V2] scsi_debug: rework resp_report_luns" patch sent by Tomas Winkler on Thursday, 26 Feb 2015. His notes: 1. Remove duplicated boundary checks which simplify the fill-in loop 2. Use more of scsi generic API Replace fixed length response array a with heap allocation allowing up to 256 normal LUNs per target. Signed-off-by:Tomas Winkler <tomas.winkler@intel.com> Reviewed-by:
-
Douglas Gilbert authored
Use TYPE_* constants for SCSI peripheral device types instead of numbers. Further cleanups requested by checkpatch.pl. Signed-off-by:
-
- 29 Apr, 2016 25 commits
-
-
Douglas Gilbert authored
The most common commands in normal use are the READ and WRITE SCSI commands. Use likely and unlikely hints along the path taken by these commands. Rename check_readiness() to make_ua() and remove associated dead code. Rename devInfoReg() to find_build_dev_info(). Signed-off-by:
-
Douglas Gilbert authored
Group most defines together first; followed by struct definitions and then table and variable definitions. Normalize all function headers. [mkp: Corrected hex value in WP/DPOFUA MODE SENSE comment] Signed-off-by:
-
Douglas Gilbert authored
When a negative value was placed in the delay parameter, a tasklet was scheduled. Change the tasklet to a work queue. Previously a delay of -1 scheduled a high priority tasklet; since there are no high priority work queues, treat -1 like other negative values in delay and schedule a work item. Signed-off-by:
-
Douglas Gilbert authored
Add 'j' to delay names to make it clearer that its unit is jiffies and to differentiate it from sdebug_ndelay whose unit is nanoseconds. Signed-off-by:
-
Douglas Gilbert authored
The driver supports two command delay interfaces, the original one whose unit is a jiffy, and a newer one whose unit is a nanosecond. Each had different implementations. Keep both interfaces but simplify the implemenation to use a single delay mechanism based on high resolution timers. Signed-off-by:
-
Douglas Gilbert authored
Remove logic to optionally hold host_lock while each command is queued. Keep module and sysfs host_lock parameters for backward compatibility. Note in module parameter description that host_lock is ignored. Signed-off-by:
-
Douglas Gilbert authored
Shorten file scope static and constant names. Use more get/put_unaligned calls to hide bit banging. Introduce sdebug_verbose boolean to replace frequent masking of option bit flags. Add GPL and bump version. [mkp: Use logical instead of bitwise OR for LBP VPD flags] Signed-off-by:
-
Don Brace authored
Reviewed-by:
Gerry Morong <gerry.morong@microsemi.com> Signed-off-by:
Don Brace <don.brace@microsemi.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Don Brace authored
Need to report HBA device removal faster than the event handler polling interval. Stop I/O to the removed disk and wait for all I/O operations to flush before removing the device. Reviewed-by:
Scott Teel <scott.teel@microsemi.com> Reviewed-by:
Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by:
-
Don Brace authored
set offload_to_be_enabled to 0 when an ioaccel2 error is processed. Before, an ioaccel completion error would turn of ioaccel but a rescan would turn it back on again. Reviewed-by:
-
Don Brace authored
offload_to_be_enabled also needs to be set to 0 during a state change. Reviewed-by:
-
Don Brace authored
faulty drives can cause the driver to hang during a scan operation. Reviewed-by:
-
Joseph T Handzik authored
There have been companies requesting a sysfs entry to obtain the sas address of device. Reviewed-by:
-
Don Brace authored
The driver was calling scsi_scan_host before enabling interrupts. This has gone unnoticed except for customers running in intx mode. Calling scsi_scan_host before interrupts are enabled causes "irq XX: nobody cared" messages and the driver to hang. This patch enables interrupts before the call to scsi_scan_host. Reported-by:
Piotr Karbowski <piotr.karbowski@gmail.com> Reviewed-by:
-
Raghava Aditya Renukunta authored
Signed-off-by:
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by:
-
Raghava Aditya Renukunta authored
When KDUMP is triggered the driver first talks to the firmware in INTX mode, but the adapter firmware is still in MSIX mode. Therefore the first driver command hangs since the driver is waiting for an INTX response and firmware gives a MSIX response. If when the OS is installed on a RAID drive created by the adapter KDUMP will hang since the driver does not receive a response in sync mode. Fixed by: Change the firmware to INTX mode if it is in MSIX mode before sending the first sync command. Cc: stable@vger.kernel.org Signed-off-by:
-
Raghava Aditya Renukunta authored
Currently driver completes double completed or spurious interrupted fibs. This is not necessary and causes the SCSI mid layer to issue aborts and resets, since completing a fib prematurely might trigger a race condition resulting in the driver not calling the scsi_done callback. Fixed by removing the call to fib complete. Signed-off-by:
-
Raghava Aditya Renukunta authored
Firmware AIF messages about cache loss and data recovery are being missed by the driver since currently they are not captured but rather let go. This patch to capture those messages and log them for the user. Signed-off-by:
-
Raghava Aditya Renukunta authored
Typically under error conditions, it is possible for aac_command_thread() to miss the wakeup from kthread_stop() and go back to sleep, causing it to hang aac_shutdown. In the observed scenario, the adapter is not functioning correctly and so aac_fib_send() never completes (or time-outs depending on how it was called). Shortly after aac_command_thread() starts it performs aac_fib_send(SendHostTime) which hangs. When aac_probe_one /aac_get_adapter_info send time outs, kthread_stop is called which breaks the command thread out of it's hang. The code will still go back to sleep in schedule_timeout() without checking kthread_should_stop() so it causes aac_probe_one to hang until the schedule_timeout() which is 30 minutes. Fixed by: Adding another kthread_should_stop() before schedule_timeout() Cc: stable@vger.kernel.org Signed-off-by:
-
Raghava Aditya Renukunta authored
As the firmware for series 6, 7, 8 cards does not support msi, remove it in the driver Signed-off-by:
-
Raghava Aditya Renukunta authored
aac_fib_send has a special function case for initial commands during driver initialization using wait < 0(pseudo sync mode). In this case, the command does not sleep but rather spins checking for timeout.This loop is calls cpu_relax() in an attempt to allow other processes/threads to use the CPU, but this function does not relinquish the CPU and so the command will hog the processor. This was observed in a KDUMP "crashkernel" and that prevented the "command thread" (which is responsible for completing the command from being timed out) from starting because it could not get the CPU. Fixed by replacing "cpu_relax()" call with "schedule()" Cc: stable@vger.kernel.org Signed-off-by:
-
Raghava Aditya Renukunta authored
The adapter has to be started after updating the number of MSIX Vectors Fixes: ecc479e0 (aacraid: Set correct MSIX count for EEH recovery) Cc: stable@vger.kernel.org Signed-off-by:
-
Raghava Aditya Renukunta authored
Suggested-by:
Seymour, Shane M <shane.seymour@hpe.com> Signed-off-by:
-
Raghava Aditya Renukunta authored
Current driver checks for NULL return from aac_fib_alloc_tag, but it not possible for it to return NULL. Fixed by: Remove all the checks for NULL returns from aac_fib_alloc_tag Suggested-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Alexey Khoroshilov authored
mptsas_smp_handler() checks for dma mapping errors by comparison returned address with zero, while pci_dma_mapping_error() should be used. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by:
Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by:
-
- 26 Apr, 2016 4 commits
-
-
Finn Thain authored
The file atari_NCR5380.c has been removed from the tree so remove it from the MAINTAINERS file as well. While we are here, add the file dtc3x80.txt as it is only relevant to the dtc driver. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Kai Makisara authored
Some drives set the ILI flag together with MEDIUM ERROR sense code. Clear the ILI flag in this case so that the medium error will be handled. The problem was reported by Maurizio Lombardi. Signed-off-by:
Kai Mäkisara <kai.makisara@kolumbus.fi> Reviewed-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
-
Sebastian Herbszt authored
Remove incorrect lockdep assertion from lpfc_sli_hbqbuf_find() which acquires the hbalock itself. Fix the comment which resulted in this mistake. Fixes: 1c2ba475 ("lpfc: Add lockdep assertions") Signed-off-by:
Sebastian Herbszt <herbszt@gmx.de> Reviewed-by:
-
Dan Carpenter authored
Presumably it isn't possible to have empty lists here, but my static checker doesn't know that and complains that "ep" can be used uninitialized. Signed-off-by:
Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by:
-
