LoongArch has hardware page coloring for L1 Cache, so we don't have
cache aliases. But SFB (Store Fill Buffer) still has aliases. So we
define SHMLBA to SZ_64K previously. But there are losts of applications
use PAGE_SIZE rather than SHMLBA to mmap() file pages and shared pages.
Of course we can fix them one by one, but not easy.

On the other hand, we can simply disable SFB for 4KB page size to fix
cache alias (there will be performance decrease, but acceptable), and
in future we will fix SFB in hardware. So we can safely define SHMLBA to
PAGE_SIZE (use the generic shmparam.h) to make life easier.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

ESRT (EFI System Resource Table) is needed for UEFI's "Capsule Update"
feature. But ESRT initialization is missing on LoongArch now, so add a
call to efi_esrt_init() at the end of efi_init().
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Generally, we can get cpu-related information, such as model name, from
/proc/cpuinfo. For FDT-based systems, we need to parse the relevant
information from DTS.

BTW, set loongson_sysconf.cores_per_package to num_processors if SMBIOS
doesn't provide a valid number (usually FDT-based systems).
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add DeviceTree file for Loongson-2K2000 processor, which integrates two
64-bit 3-issue superscalar LA364 processor cores.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add DeviceTree file for Loongson-2K1000 processor, which integrates two
64-bit 2-issue superscalar LA264 processor cores.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add DeviceTree file for Loongson-2K0500 processor, which integrates one
64-bit 2-issue superscalar LA264 processor core.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

During the upstream progress of those DT-based drivers, DT properties
are changed a lot so very different from those in existing bootloaders.
It is inevitably that some existing systems do not provide a standard,
canonical device tree to the kernel at boot time. So let's provide a
device tree table in the kernel, keyed by the dts filename, containing
the relevant DTBs.

We can use the built-in dts files as references. Each SoC has only one
built-in dts file which describes all possible device information of
that SoC, so the dts files are good examples during development.

And as a reference, our built-in dts file only enables the most basic
bootable combinations (so it is generic enough), acts as an alternative
in case the dts in the bootloader is unexpected.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

The Loongson-2K0500/2K1000 CPUs have 64 interrupt sources as inputs, and
a route-mapped node handles up to 32 interrupt sources, so two liointc
nodes are defined in dts{i}.

Of course, we have to make sure that the routing outputs ("intx") of the
two nodes do not conflict, i.e. "int0" can only be used as a routing
output for one of them. Therefore, "interrupt-names" should be defined
as "pattern".

In addition, since "interrupt-names" and "interrupts" are one-to-one
correspondence, we pass it to get the corresponding interrupt number in
the driver. Setting it to "required" does not break ABI, because it is
already logically represented as "required".

This fixes dtbs_check warning:

DTC_CHK arch/loongarch/boot/dts/loongson-2k0500-ref.dtb
arch/loongarch/boot/dts/loongson-2k0500-ref.dtb: interrupt-controller@1fe11440: interrupt-names:0: 'int0' was expected
        From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
arch/loongarch/boot/dts/loongson-2k0500-ref.dtb: interrupt-controller@1fe11440: Unevaluated properties are not allowed ('interrupt-names' was unexpected)
        From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
DTC_CHK arch/loongarch/boot/dts/loongson-2k1000-ref.dtb
arch/loongarch/boot/dts/loongson-2k1000-ref.dtb: interrupt-controller@1fe01440: interrupt-names:0: 'int0' was expected
        From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
arch/loongarch/boot/dts/loongson-2k1000-ref.dtb: interrupt-controller@1fe01440: Unevaluated properties are not allowed ('interrupt-names' was unexpected)
        From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

As we know, the Loongson-2K0500 is a single-core CPU, and the core1-
related register (isr1) does not exist. So "reg" and "reg-names" should
be set to "minItems 2"(main nad isr0).

This fixes dtbs_check warning:

DTC_CHK arch/loongarch/boot/dts/loongson-2k0500-ref.dtb
arch/loongarch/boot/dts/loongson-2k0500-ref.dtb: interrupt-controller@1fe11400: reg-names: ['main', 'isr0'] is too short
        From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
arch/loongarch/boot/dts/loongson-2k0500-ref.dtb: interrupt-controller@1fe11400: Unevaluated properties are not allowed ('reg-names' was unexpected)
        From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
arch/loongarch/boot/dts/loongson-2k0500-ref.dtb: interrupt-controller@1fe11400: reg: [[0, 534844416, 0, 64], [0, 534843456, 0, 8]] is too short
        From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
arch/loongarch/boot/dts/loongson-2k0500-ref.dtb: interrupt-controller@1fe11440: reg-names: ['main', 'isr0'] is too short
        From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add Loongson SoC boards binding with DT schema format using json-schema.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add the available CPUs in LoongArch binding with DT schema format using
json-schema.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Enable initial Rust support for LoongArch.
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

The existing mainline clang development version encounters difficulties
compiling the LoongArch kernel module. It is anticipated that this issue
will be resolved in the upcoming 18.0.0 release. To prevent user
confusion arising from broken builds, it is advisable to raise the
minimum required clang version for LoongArch to 18.0.0.
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1941Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

With recent trunk versions of binutils and gcc, alignment directives are
represented with R_LARCH_ALIGN relocs on LoongArch, which is necessary
for the linker to maintain alignment requirements during its relaxation
passes. And even though the kernel is built with relaxation disabled, so
far a small number of R_LARCH_RELAX marker relocs are still emitted as
part of la.* pseudo instructions in assembly. These two kinds of relocs
do not refer to symbols, which can trip up modpost's section mismatch
checks, because the r_offset of said relocs can be zero or any other
meaningless value, eventually leading to a `from == NULL` condition in
default_mismatch_handler and SIGSEGV.

As the two kinds of relocs are not concerned with symbols, just ignore
them for section mismatch check purposes.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Pull i2c fixes from Wolfram Sang:
 "Improve the detection when to run atomic transfer handlers for kernels
  with preemption disabled. This removes some false positive splats a
  number of users were seeing if their driver didn't have support for
  atomic transfers.

  Also, fix a typo in the docs while we are here"

* tag 'i2c-for-6.7-final' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core: Fix atomic xfer check for non-preempt config
  Documentation/i2c: fix spelling error in i2c-address-translators

Since commit aa49c908 ("i2c: core: Run atomic i2c xfer when
!preemptible"), the whole reboot/power off sequence on non-preempt kernels
is using atomic i2c xfer, as !preemptible() always results to 1.

During device_shutdown(), the i2c might be used a lot and not all busses
have implemented an atomic xfer handler. This results in a lot of
avoidable noise, like:

[   12.687169] No atomic I2C transfer handler for 'i2c-0'
[   12.692313] WARNING: CPU: 6 PID: 275 at drivers/i2c/i2c-core.h:40 i2c_smbus_xfer+0x100/0x118
...

Fix this by allowing non-atomic xfer when the interrupts are enabled, as
it was before.

Link: https://lore.kernel.org/r/20231222230106.73f030a5@yea
Link: https://lore.kernel.org/r/20240102150350.3180741-1-mwalle@kernel.org
Link: https://lore.kernel.org/linux-i2c/13271b9b-4132-46ef-abf8-2c311967bb46@mailbox.org/
Fixes: aa49c908 ("i2c: core: Run atomic i2c xfer when !preemptible")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Tested-by: Michael Walle <mwalle@kernel.org>
Tested-by: Tor Vic <torvic9@mailbox.org>
[wsa: removed a comment which needs more work, code is ok]
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Merge tag 'mm-hotfixes-stable-2024-01-05-11-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc mm fixes from Andrew Morton:
 "12 hotfixes.

  Two are cc:stable and the remainder either address post-6.7 issues or
  aren't considered necessary for earlier kernel versions"

* tag 'mm-hotfixes-stable-2024-01-05-11-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm: shrinker: use kvzalloc_node() from expand_one_shrinker_info()
  mailmap: add entries for Mathieu Othacehe
  MAINTAINERS: change vmware.com addresses to broadcom.com
  arch/mm/fault: fix major fault accounting when retrying under per-VMA lock
  mm/mglru: skip special VMAs in lru_gen_look_around()
  MAINTAINERS: hand over hwpoison maintainership to Miaohe Lin
  MAINTAINERS: remove hugetlb maintainer Mike Kravetz
  mm: fix unmap_mapping_range high bits shift bug
  mm: memcg: fix split queue list crash when large folio migration
  mm: fix arithmetic for max_prop_frac when setting max_ratio
  mm: fix arithmetic for bdi min_ratio
  mm: align larger anonymous mappings on THP boundaries

Pull nfsd fix from Chuck Lever:

 - Fix another regression in the NFSD administrative API

* tag 'nfsd-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: drop the nfsd_put helper

Merge tag 'firewire-fixes-6.7-final' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fix from Takashi Sakamoto:
 "A single patch to suppress unexpected system reboot in AMD Ryzen
  machines with PCIe card consisting of Asmedia ASM1083/1085 and
  VT6306/6307/6308.

  When the 1394 OHCI driver for the card accesses a specific register
  in PCI memory space, the system reboot often occurs.

  The issue affects all versions of Linux kernel as long as the 1394
  OHCI driver is included. The mechanism of unexpected system reboot is
  not clear, so the driver is changed to avoid the access itself when
  detecting the combination of hardware"

* tag 'firewire-fixes-6.7-final' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: suppress unexpected system reboot in AMD Ryzen machines and ASM108x/VT630x PCIe cards

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix releasing the host by canceling the delayed work
   - Fix pause retune on all RPMB partitions

  MMC host:
   - meson-mx-sdhc: Fix HW hang during card initialization
   - sdhci-sprd: Fix eMMC init failure after HW reset"

* tag 'mmc-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-sprd: Fix eMMC init failure after hw reset
  mmc: core: Cancel delayed work before releasing host
  mmc: rpmb: fixes pause retune on all RPMB partitions.
  mmc: meson-mx-sdhc: Fix initialization frozen issue

Pull more drm fixes from Dave Airlie:
 "The amdgpu ones are fairly normal, the one that is a bit large is a
  fix for a newly introduced IP in 6.7 so unlikely to cause regressions.

  The nouveau ones are mostly memory leaks and debugging cleanups from
  the GSP (new nvidia firmware) enablement. There are some GSP changes
  to the message passing code and a subsequent fix for eDP panel turn
  on, that means my laptop can turn on the panel in GSP mode. These are
  fairly low chance of disrupting things since GSP is new in 6.7. The
  final not all in GSP fix is a deadlock seen with i915/nouveau when GSP
  is used where the the fence and irq paths have locking inversions,
  I've pushed some irq enablement out to a workqueue, and this has seen
  some fairly decent testing.

  amdgpu:
   - DP MST fix
   - SMU 13.0.6 fixes
   - fix displays on macbooks using vega12
   - fix VSC and colorimetry on DP/eDP

  nouveau:
   - fix deadlock between fence signalling and irq paths
   - fix GSP memory leaks
   - fix GSP leftover debug
   - hide some GSP callback messages
   - fix GSP display disable path
   - fix GSP ACPI interaction
   - handle errors in ctrl messages
   - use errors info to fix DP link training"

* tag 'drm-fixes-2024-01-05' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/dp: Honor GSP link training retry timeouts
  nouveau: push event block/allowing out of the fence context
  nouveau/gsp: always free the alloc messages on r535
  nouveau/gsp: don't free ctrl messages on errors
  nouveau/gsp: convert gsp errors to generic errors
  drm/nouveau/gsp: Fix ACPI MXDM/MXDS method invocations
  nouveau/gsp: free userd allocation.
  nouveau/gsp: free acpi object after use
  nouveau: fix disp disabling with GSP
  nouveau/gsp: drop some acpi related debug
  nouveau/gsp: add three notifier callbacks that we see in normal operation (v2)
  drm/amd/pm: Use gpu_metrics_v1_5 for SMUv13.0.6
  drm/amd/pm: Add gpu_metrics_v1_5
  drm/amd/pm: Add mem_busy_percent for GCv9.4.3 apu
  drm/amd/display: Fix sending VSC (+ colorimetry) packets for DP/eDP displays without PSR
  drm/amdgpu: skip gpu_info fw loading on navi12
  drm/amd/display: add nv12 bounding box
  drm/amd/pm: Update metric table for jpeg/vcn data
  drm/amd/pm: Use separate metric table for APU
  drm/amd/display: pbn_div need be updated for hotplug event

syzbot is reporting uninit-value at shrinker_alloc(), for commit
307becec ("mm: shrinker: add a secondary array for
shrinker_info::{map, nr_deferred}") which assumed that the ->unit was
allocated with __GFP_ZERO forgot to replace kvmalloc_node() in
expand_one_shrinker_info() with kvzalloc_node().

Link: https://lkml.kernel.org/r/9226cc0a-10e0-4489-80c5-58c3b5b4359c@I-love.SAKURA.ne.jpReported-by: syzbot <syzbot+1e0ed05798af62917464@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=1e0ed05798af62917464
Fixes: 307becec ("mm: shrinker: add a secondary array for shrinker_info::{map, nr_deferred}")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull ARM SoC fixes from Arnd Bergmann:
 "These are two correctness fixes for handing DT input in the
  Allwinner (sunxi) SMP startup code"

* tag 'soc-fixes-6.7-3a' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: sun9i: smp: fix return code check of of_property_match_string
  ARM: sun9i: smp: Fix array-index-out-of-bounds read in sunxi_mc_smp_init

Pull kvm fix from Paolo Bonzini:

 - Fix boolean logic in intel_guest_get_msrs

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86/pmu: fix masking logic for MSR_CORE_PERF_GLOBAL_CTRL

Merge tag 'probes-fixes-v6.7-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull kprobes/x86 fix from Masami Hiramatsu:

 - Fix to emulate indirect call which size is not 5 byte.

   Current code expects the indirect call instructions are 5 bytes, but
   that is incorrect. Usually indirect call based on register is shorter
   than that, thus the emulation causes a kernel crash by accessing
   wrong instruction boundary. This uses the instruction size to
   calculate the return address correctly.

* tag 'probes-fixes-v6.7-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  x86/kprobes: fix incorrect return address calculation in kprobe_emulate_call_indirect

Pull smb client fixes from Steve French:
 "Three important multichannel smb3 client fixes found in recent
  testing:

   - fix oops due to incorrect refcounting of interfaces after
     disabling multichannel

   - fix possible unrecoverable session state after disabling
     multichannel with active sessions

   - fix two places that were missing use of chan_lock"

* tag '6.7-rc8-smb3-mchan-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: do not depend on release_iface for maintaining iface_list
  cifs: cifs_chan_is_iface_active should be called with chan_lock held
  cifs: after disabling multichannel, mark tcon for reconnect

firewire: ohci: suppress unexpected system reboot in AMD Ryzen machines and ASM108x/VT630x PCIe cards

VIA VT6306/6307/6308 provides PCI interface compliant to 1394 OHCI. When
the hardware is combined with Asmedia ASM1083/1085 PCIe-to-PCI bus bridge,
it appears that accesses to its 'Isochronous Cycle Timer' register (offset
0xf0 on PCI memory space) often causes unexpected system reboot in any
type of AMD Ryzen machine (both 0x17 and 0x19 families). It does not
appears in the other type of machine (AMD pre-Ryzen machine, Intel
machine, at least), or in the other OHCI 1394 hardware (e.g. Texas
Instruments).

The issue explicitly appears at a commit dcadfd7f ("firewire: core:
use union for callback of transaction completion") added to v6.5 kernel.
It changed 1394 OHCI driver to access to the register every time to
dispatch local asynchronous transaction. However, the issue exists in
older version of kernel as long as it runs in AMD Ryzen machine, since
the access to the register is required to maintain bus time. It is not
hard to imagine that users experience the unexpected system reboot when
generating bus reset by plugging any devices in, or reading the register
by time-aware application programs; e.g. audio sample processing.

This commit suppresses the unexpected system reboot in the combination of
hardware. It avoids the access itself. As a result, the software stack can
not provide the hardware time anymore to unit drivers, userspace
applications, and nodes in the same IEEE 1394 bus. It brings apparent
disadvantage since time-aware application programs require it, while
time-unaware applications are available again; e.g. sbp2.

Cc: stable@vger.kernel.org
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1215436Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217994Reported-by: Tobias Gruetzmacher <tobias-lists@23.gs>
Closes: https://sourceforge.net/p/linux1394/mailman/message/58711901/
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2240973
Closes: https://bugs.launchpad.net/linux/+bug/2043905
Link: https://lore.kernel.org/r/20240102110150.244475-1-o-takashi@sakamocchi.jpSigned-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>

It's not safe to call nfsd_put once nfsd_last_thread has been called, as
that function will zero out the nn->nfsd_serv pointer.

Drop the nfsd_put helper altogether and open-code the svc_put in its
callers instead. That allows us to not be reliant on the value of that
pointer when handling an error.

Fixes: 2a501f55 ("nfsd: call nfsd_last_thread() before final nfsd_put()")
Reported-by: Zhi Li <yieli@redhat.com>
Cc: NeilBrown <neilb@suse.de>
Signed-off-by: Jeffrey Layton <jlayton@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Turns out that one of the ways that Nvidia's driver handles the pre-LT
timeout for eDP panels is by providing a retry timeout in their link
training callbacks that we're expected to wait for. Up until now we didn't
pay any attention to this parameter.

So, start honoring the timeout if link training fails - and retry up to 3
times. The "3 times" bit comes from OpenRM's link training code.

[airlied: this fixes the panel on one of my laptops]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-12-airlied@gmail.com

There is a deadlock between the irq and fctx locks,
the irq handling takes irq then fctx lock
the fence signalling takes fctx then irq lock

This splits the fence signalling path so the code that hits
the irq lock is done in a separate work queue.

This seems to fix crashes/hangs when using nouveau gsp with
i915 primary GPU.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-11-airlied@gmail.com

Fixes a memory leak seen with kmemleak.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-10-airlied@gmail.com

It looks like for some messages the upper layers need to get access to the
results of the message so we can interpret it.

Rework the ctrl push interface to not free things and cleanup properly
whereever it errors out.

Requested-by: Lyude
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-9-airlied@gmail.com

This should let the upper layers retry as needed on EAGAIN.

There may be other values we will care about in the future, but
this covers our present needs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-8-airlied@gmail.com

Currently we get an error from ACPI because both of these arguments expect
a single argument, and we don't provide one. I'm not totally clear on what
that argument does, but we're able to find the missing value from
_acpiCacheMethodData() in src/kernel/platform/acpi_common.c in nvidia's
driver. So, let's add that - which doesn't get eDP displays to power on
quite yet, but gets rid of the argument warning at least.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-7-airlied@gmail.com

This was being leaked.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-6-airlied@gmail.com

This fixes a memory leak for the acpi dod object.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-5-airlied@gmail.com

This func ptr here is normally static allocation, but gsp r535
uses a dynamic pointer, so we need to handle that better.

This fixes a crash with GSP when you use config=disp=0 to avoid
disp problems.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-4-airlied@gmail.com

These were leftover debug, if we need to bring them back do so
for debugging later.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-3-airlied@gmail.com

Add NULL callbacks for some things GSP calls that we don't handle, but know about
so we avoid the logging.

v2: Timur suggested allowing null fn.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222043308.3090089-2-airlied@gmail.com