When moving to non-system toolchains, we inadvertantly killed the
ability to use ccache. So instead, build ccache support into the test
harness directly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Rather than relying on the system to have cross toolchains available,
simply download musl.cc's ones and use that libc.so, and then we use it
to fill in a few missing platforms, such as riscv64, riscv64, powerpc64,
and s390x.

Since riscv doesn't have a second serial port in its device description,
we have to use virtio's vport. This is actually the same situation on
ARM, but we were previously hacking QEMU up to work around this, which
required a custom QEMU. Instead just do the vport trick on ARM too.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The parallel tests were added to catch queueing issues from multiple
cores. But what happens in reality when testing tons of processes is
that these separate threads wind up fighting with the scheduler, and we
wind up with contention in places we don't care about that decrease the
chances of hitting a bug. So just do a test with the number of CPU
cores, rather than trying to scale up arbitrarily.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

I hate to do this, but I still do not have a good solution to actually
fix this bug across architectures. So just disable it for now, so that
the CI can still deliver actionable results. This commit adds a large
red warning, so that at least the failure isn't lost forever, and
hopefully this can be revisited down the line.

Link: https://lore.kernel.org/netdev/CAHmME9pv1x6C4TNdL6648HydD8r+txpV4hTUXOBVkrapBXH4QQ@mail.gmail.com/
Link: https://lore.kernel.org/netdev/YmszSXueTxYOC41G@zx2c4.com/
Link: https://lore.kernel.org/wireguard/CAHmME9rNnBiNvBstb7MPwK-7AmAN0sOfnhdR=eeLrowWcKxaaQ@mail.gmail.com/Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

it/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes 2022-05-03

This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The cited commits didn't use proper matching on inner TTC
as a result distribution of encapsulated packets wasn't symmetric
between the physical ports.

Fixes: 4c71ce50 ("net/mlx5: Support partial TTC rules")
Fixes: 8e25a2bc ("net/mlx5: Lag, add support to create TTC tables for LAG port selection")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Double clear of reset requested state can lead to NULL pointer as it
will try to delete the timer twice. This can happen for example on a
race between abort from FW and pci error or reset. Avoid such case using
test_and_clear_bit() to verify only one time reset requested state clear
flow. Similarly use test_and_set_bit() to verify only one time reset
requested state set flow.

Fixes: 7dd6df32 ("net/mlx5: Handle sync reset abort event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The sync reset flow can lead to the following deadlock when
poll_sync_reset() is called by timer softirq and waiting on
del_timer_sync() for the same timer. Fix that by moving the part of the
flow that waits for the timer to reset_reload_work.

It fixes the following kernel Trace:
RIP: 0010:del_timer_sync+0x32/0x40
...
Call Trace:
 <IRQ>
 mlx5_sync_reset_clear_reset_requested+0x26/0x50 [mlx5_core]
 poll_sync_reset.cold+0x36/0x52 [mlx5_core]
 call_timer_fn+0x32/0x130
 __run_timers.part.0+0x180/0x280
 ? tick_sched_handle+0x33/0x60
 ? tick_sched_timer+0x3d/0x80
 ? ktime_get+0x3e/0xa0
 run_timer_softirq+0x2a/0x50
 __do_softirq+0xe1/0x2d6
 ? hrtimer_interrupt+0x136/0x220
 irq_exit+0xae/0xb0
 smp_apic_timer_interrupt+0x7b/0x140
 apic_timer_interrupt+0xf/0x20
 </IRQ>

Fixes: 3c5193a8 ("net/mlx5: Use del_timer_sync in fw reset flow of halting poll")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Setting dscp2prio during the driver reload can cause dcb ieee app list to
be not empty after the reload finish and as a result to a conflict between
the priority trust state reported by the app and the state in the device
register.

Reset the dcb ieee app list on initialization in case this is
conflicting with the register status.

Fixes: 2a5e7a13 ("net/mlx5e: Add dcbnl dscp to priority support")
Signed-off-by: Moshe Tal <moshet@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

During TC action parsing, the can_offload callback is called
before calling the action's main parsing callback.

Later on, the can_offload callback is called again before handling
the action's post_parse callback if exists.

Since the main parsing callback might have changed and set parsing
params for the rule, following can_offload checks might fail because
some parsing params were already set.

Specifically, the ct action main parsing sets the ct param in the
parsing status structure and when the second can_offload for ct action
is called, before handling the ct post parsing, it will return an error
since it checks this ct param to indicate multiple ct actions which are
not supported.

Therefore, the can_offload call is removed from the post parsing
handling to prevent such cases.
This is allowed since the first can_offload call will ensure that the
action can be offloaded and the fact the code reached the post parsing
handling already means that the action can be offloaded.

Fixes: 8300f225 ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

__mlx5_tc_ct_entry_put() queues release of tuple related to some ct FT,
if that is the last reference to that tuple, the actual deletion of
the tuple can happen after the FT is already destroyed and freed.

Flush the used workqueue before destroying the ct FT.

Fixes: a2173131 ("net/mlx5e: CT: manage the lifetime of the ct entry object")
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When resolving the decap route device for a tunnel decap rule,
the result may be an OVS internal port device.

Prior to adding the support for internal port offload, such case
would result in using the uplink as the default decap route device
which allowed devices that can't support internal port offload
to offload this decap rule.

This behavior got broken by adding the internal port offload which
will fail in case the device can't support internal port offload.

To restore the old behavior, use the uplink device as the decap
route as before when internal port offload is not supported.

Fixes: b16eb3c8 ("net/mlx5: Support internal port as decap route device")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

ct_clear action is translated to clearing reg_c metadata
which holds ct state and zone information using mod header
actions.
These actions are allocated during the actions parsing, as
part of the flow attributes main mod header action list.

If ct action exists in the rule, the flow's main mod header
is used only in the post action table rule, after the ct tables
which set the ct info in the reg_c as part of the ct actions.

Therefore, if the original rule has a ct_clear action followed
by a ct action, the ct action reg_c setting will be done first and
will be followed by the ct_clear resetting reg_c and overwriting
the ct info.

Fix this by moving the ct_clear mod header actions allocation from
the ct action parsing stage to the ct action post parsing stage where
it is already known if ct_clear is followed by a ct action.
In such case, we skip the mod header actions allocation for the ct
clear since the ct action will write to reg_c anyway after clearing it.

Fixes: 806401c2 ("net/mlx5e: CT, Fix multiple allocations and memleak of mod acts")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Referenced change added check to skip updating fib when new fib instance
has same or lower priority. However, new fib instance can be an update on
same dst address as existing one even though the structure is another
instance that has different address. Ignoring events on such instances
causes multipath LAG state to not be correctly updated.

Track 'dst' and 'dst_len' fields of fib event fib_entry_notifier_info
structure and don't skip events that have the same value of that fields.

Fixes: ad11c4f1 ("net/mlx5e: Lag, Only handle events from highest priority multipath entry")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Referenced change incorrectly sets single path fib_info even when LAG is
not active. Fix it by moving call to mlx5_lag_fib_set() into conditional
that verifies LAG state.

Fixes: ad11c4f1 ("net/mlx5e: Lag, Only handle events from highest priority multipath entry")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Recent commit that modified fib route event handler to handle events
according to their priority introduced use-after-free[0] in mp->mfi pointer
usage. The pointer now is not just cached in order to be compared to
following fib_info instances, but is also dereferenced to obtain
fib_priority. However, since mlx5 lag code doesn't hold the reference to
fin_info during whole mp->mfi lifetime, it could be used after fib_info
instance has already been freed be kernel infrastructure code.

Don't ever dereference mp->mfi pointer. Refactor it to be 'const void*'
type and cache fib_info priority in dedicated integer. Group
fib_info-related data into dedicated 'fib' structure that will be further
extended by following patches in the series.

[0]:

[  203.588029] ==================================================================
[  203.590161] BUG: KASAN: use-after-free in mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[  203.592386] Read of size 4 at addr ffff888144df2050 by task kworker/u20:4/138

[  203.594766] CPU: 3 PID: 138 Comm: kworker/u20:4 Tainted: G    B             5.17.0-rc7+ #6
[  203.596751] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  203.598813] Workqueue: mlx5_lag_mp mlx5_lag_fib_update [mlx5_core]
[  203.600053] Call Trace:
[  203.600608]  <TASK>
[  203.601110]  dump_stack_lvl+0x48/0x5e
[  203.601860]  print_address_description.constprop.0+0x1f/0x160
[  203.602950]  ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[  203.604073]  ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[  203.605177]  kasan_report.cold+0x83/0xdf
[  203.605969]  ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[  203.607102]  mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[  203.608199]  ? mlx5_lag_init_fib_work+0x1c0/0x1c0 [mlx5_core]
[  203.609382]  ? read_word_at_a_time+0xe/0x20
[  203.610463]  ? strscpy+0xa0/0x2a0
[  203.611463]  process_one_work+0x722/0x1270
[  203.612344]  worker_thread+0x540/0x11e0
[  203.613136]  ? rescuer_thread+0xd50/0xd50
[  203.613949]  kthread+0x26e/0x300
[  203.614627]  ? kthread_complete_and_exit+0x20/0x20
[  203.615542]  ret_from_fork+0x1f/0x30
[  203.616273]  </TASK>

[  203.617174] Allocated by task 3746:
[  203.617874]  kasan_save_stack+0x1e/0x40
[  203.618644]  __kasan_kmalloc+0x81/0xa0
[  203.619394]  fib_create_info+0xb41/0x3c50
[  203.620213]  fib_table_insert+0x190/0x1ff0
[  203.621020]  fib_magic.isra.0+0x246/0x2e0
[  203.621803]  fib_add_ifaddr+0x19f/0x670
[  203.622563]  fib_inetaddr_event+0x13f/0x270
[  203.623377]  blocking_notifier_call_chain+0xd4/0x130
[  203.624355]  __inet_insert_ifa+0x641/0xb20
[  203.625185]  inet_rtm_newaddr+0xc3d/0x16a0
[  203.626009]  rtnetlink_rcv_msg+0x309/0x880
[  203.626826]  netlink_rcv_skb+0x11d/0x340
[  203.627626]  netlink_unicast+0x4cc/0x790
[  203.628430]  netlink_sendmsg+0x762/0xc00
[  203.629230]  sock_sendmsg+0xb2/0xe0
[  203.629955]  ____sys_sendmsg+0x58a/0x770
[  203.630756]  ___sys_sendmsg+0xd8/0x160
[  203.631523]  __sys_sendmsg+0xb7/0x140
[  203.632294]  do_syscall_64+0x35/0x80
[  203.633045]  entry_SYSCALL_64_after_hwframe+0x44/0xae

[  203.634427] Freed by task 0:
[  203.635063]  kasan_save_stack+0x1e/0x40
[  203.635844]  kasan_set_track+0x21/0x30
[  203.636618]  kasan_set_free_info+0x20/0x30
[  203.637450]  __kasan_slab_free+0xfc/0x140
[  203.638271]  kfree+0x94/0x3b0
[  203.638903]  rcu_core+0x5e4/0x1990
[  203.639640]  __do_softirq+0x1ba/0x5d3

[  203.640828] Last potentially related work creation:
[  203.641785]  kasan_save_stack+0x1e/0x40
[  203.642571]  __kasan_record_aux_stack+0x9f/0xb0
[  203.643478]  call_rcu+0x88/0x9c0
[  203.644178]  fib_release_info+0x539/0x750
[  203.644997]  fib_table_delete+0x659/0xb80
[  203.645809]  fib_magic.isra.0+0x1a3/0x2e0
[  203.646617]  fib_del_ifaddr+0x93f/0x1300
[  203.647415]  fib_inetaddr_event+0x9f/0x270
[  203.648251]  blocking_notifier_call_chain+0xd4/0x130
[  203.649225]  __inet_del_ifa+0x474/0xc10
[  203.650016]  devinet_ioctl+0x781/0x17f0
[  203.650788]  inet_ioctl+0x1ad/0x290
[  203.651533]  sock_do_ioctl+0xce/0x1c0
[  203.652315]  sock_ioctl+0x27b/0x4f0
[  203.653058]  __x64_sys_ioctl+0x124/0x190
[  203.653850]  do_syscall_64+0x35/0x80
[  203.654608]  entry_SYSCALL_64_after_hwframe+0x44/0xae

[  203.666952] The buggy address belongs to the object at ffff888144df2000
                which belongs to the cache kmalloc-256 of size 256
[  203.669250] The buggy address is located 80 bytes inside of
                256-byte region [ffff888144df2000, ffff888144df2100)
[  203.671332] The buggy address belongs to the page:
[  203.672273] page:00000000bf6c9314 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x144df0
[  203.674009] head:00000000bf6c9314 order:2 compound_mapcount:0 compound_pincount:0
[  203.675422] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff)
[  203.676819] raw: 002ffff800010200 0000000000000000 dead000000000122 ffff888100042b40
[  203.678384] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
[  203.679928] page dumped because: kasan: bad access detected

[  203.681455] Memory state around the buggy address:
[  203.682421]  ffff888144df1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  203.683863]  ffff888144df1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  203.685310] >ffff888144df2000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  203.686701]                                                  ^
[  203.687820]  ffff888144df2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  203.689226]  ffff888144df2100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  203.690620] ==================================================================

Fixes: ad11c4f1 ("net/mlx5e: Lag, Only handle events from highest priority multipath entry")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The arguments of update_buffer_lossy() is in a wrong order. Fix it.

Fixes: 88b3d5c9 ("net/mlx5e: Fix port buffers cell size value")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Currently, match VLAN rule also matches packets that have multiple VLAN
headers. This behavior is similar to buggy flower classifier behavior that
has recently been fixed. Fix the issue by matching on
outer_second_cvlan_tag with value 0 which will cause the HW to verify the
packet doesn't contain second vlan header.

Fixes: 699e96dd ("net/mlx5e: Support offloading tc double vlan headers match")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Resource dump menu may span over more than a single page, support it.
Otherwise, menu read may result in a memory access violation: reading
outside of the allocated page.
Note that page format of the first menu page contains menu headers while
the proceeding menu pages contain only records.

The KASAN logs are as follows:
BUG: KASAN: slab-out-of-bounds in strcmp+0x9b/0xb0
Read of size 1 at addr ffff88812b2e1fd0 by task systemd-udevd/496

CPU: 5 PID: 496 Comm: systemd-udevd Tainted: G    B  5.16.0_for_upstream_debug_2022_01_10_23_12 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x57/0x7d
 print_address_description.constprop.0+0x1f/0x140
 ? strcmp+0x9b/0xb0
 ? strcmp+0x9b/0xb0
 kasan_report.cold+0x83/0xdf
 ? strcmp+0x9b/0xb0
 strcmp+0x9b/0xb0
 mlx5_rsc_dump_init+0x4ab/0x780 [mlx5_core]
 ? mlx5_rsc_dump_destroy+0x80/0x80 [mlx5_core]
 ? lockdep_hardirqs_on_prepare+0x286/0x400
 ? raw_spin_unlock_irqrestore+0x47/0x50
 ? aomic_notifier_chain_register+0x32/0x40
 mlx5_load+0x104/0x2e0 [mlx5_core]
 mlx5_init_one+0x41b/0x610 [mlx5_core]
 ....
The buggy address belongs to the object at ffff88812b2e0000
 which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 4048 bytes to the right of
 4096-byte region [ffff88812b2e0000, ffff88812b2e1000)
The buggy address belongs to the page:
page:000000009d69807a refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88812b2e6000 pfn:0x12b2e0
head:000000009d69807a order:3 compound_mapcount:0 compound_pincount:0
flags: 0x8000000000010200(slab|head|zone=2)
raw: 8000000000010200 0000000000000000 dead000000000001 ffff888100043040
raw: ffff88812b2e6000 0000000080040000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88812b2e1e80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88812b2e1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88812b2e1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                                                 ^
 ffff88812b2e2000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88812b2e2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Fixes: 12206b17 ("net/mlx5: Add support for resource dump")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When OVS internal port is the vtep device, the first decap
rule is matching on the internal port's vport metadata value
and then changes the metadata to be the uplink's value.

Therefore, following rules on the tunnel, in chain > 0, should
avoid matching on internal port metadata and use the uplink
vport metadata instead.

Select the uplink's metadata value for the source vport match
in case the rule is in chain greater than zero, even if the tunnel
route device is internal port.

Fixes: 166f431e ("net/mlx5e: Add indirect tc offload of ovs internal port")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Michael Chan says:

====================
bnxt_en: Bug fixes

This patch series includes 3 fixes:
 - Fix an occasional VF open failure.
 - Fix a PTP spinlock usage before initialization
 - Fix unnecesary RX packet drops under high TX traffic load.
====================

Link: https://lore.kernel.org/r/1651540392-2260-1-git-send-email-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In bnxt_poll_p5(), we first check cpr->has_more_work.  If it is true,
we are in NAPI polling mode and we will call __bnxt_poll_cqs() to
continue polling.  It is possible to exhanust the budget again when
__bnxt_poll_cqs() returns.

We then enter the main while loop to check for new entries in the NQ.
If we had previously exhausted the NAPI budget, we may call
__bnxt_poll_work() to process an RX entry with zero budget.  This will
cause packets to be dropped unnecessarily, thinking that we are in the
netpoll path.  Fix it by breaking out of the while loop if we need
to process an RX NQ entry with no budget left.  We will then exit
NAPI and stay in polling mode.

Fixes: 389a877a ("bnxt_en: Process the NQ under NAPI continuous polling.")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bnxt_ptp_init() calls bnxt_ptp_init_rtc() which will acquire the ptp_lock
spinlock.  The spinlock is not initialized until later.  Move the
bnxt_ptp_init_rtc() call after the spinlock is initialized.

Fixes: 24ac1ecd ("bnxt_en: Add driver support to use Real Time Counter for PTP")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bnxt_open() can fail in this code path, especially on a VF when
it fails to reserve default rings:

bnxt_open()
  __bnxt_open_nic()
    bnxt_clear_int_mode()
    bnxt_init_dflt_ring_mode()

RX rings would be set to 0 when we hit this error path.

It is possible for a subsequent bnxt_open() call to potentially succeed
with a code path like this:

bnxt_open()
  bnxt_hwrm_if_change()
    bnxt_fw_init_one()
      bnxt_fw_init_one_p3()
        bnxt_set_dflt_rfs()
          bnxt_rfs_capable()
            bnxt_hwrm_reserve_rings()

On older chips, RFS is capable if we can reserve the number of vnics that
is equal to RX rings + 1.  But since RX rings is still set to 0 in this
code path, we may mistakenly think that RFS is supported for 0 RX rings.

Later, when the default RX rings are reserved and we try to enable
RFS, it would fail and cause bnxt_open() to fail unnecessarily.

We fix this in 2 places.  bnxt_rfs_capable() will always return false if
RX rings is not yet set.  bnxt_init_dflt_ring_mode() will call
bnxt_set_dflt_rfs() which will always clear the RFS flags if RFS is not
supported.

Fixes: 20d7d1c5 ("bnxt_en: reliably allocate IRQ table on reset to avoid crash")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The AlphaProject AP-SH4A-3A/AP-SH4AD-0A SH boards use IRQ0 for their SMSC
LAN911x Ethernet chip, so the networking on them must have been broken by
commit 965b2aa7 ("net/smsc911x: fix irq resource allocation failure")
which filtered out 0 as well as the negative error codes -- it was kinda
correct at the time, as platform_get_irq() could return 0 on of_irq_get()
failure and on the actual 0 in an IRQ resource.  This issue was fixed by
me (back in 2016!), so we should be able to fix this driver to allow IRQ0
usage again...

When merging this to the stable kernels, make sure you also merge commit
e330b9a6 ("platform: don't return 0 from platform_get_irq[_byname]()
on error") -- that's my fix to platform_get_irq() for the DT platforms...

Fixes: 965b2aa7 ("net/smsc911x: fix irq resource allocation failure")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/656036e4-6387-38df-b8a7-6ba683b16e63@omp.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As noted elsewhere, various GPON SFP modules exhibit non-standard
TX-fault behaviour. In the tested case, the Huawei MA5671A, when used
in combination with a Marvell mv88e6085 switch, was found to
persistently assert TX-fault, resulting in the module being disabled.

This patch adds a quirk to ignore the SFP_F_TX_FAULT state, allowing the
module to function.

Change from v1: removal of erroneous return statment (Andrew Lunn)
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220502223315.1973376-1-mnhagan88@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot is reporting use-after-free read in tcp_retransmit_timer() [1],
for TCP socket used by RDS is accessing sock_net() without acquiring a
refcount on net namespace. Since TCP's retransmission can happen after
a process which created net namespace terminated, we need to explicitly
acquire a refcount.

Link: https://syzkaller.appspot.com/bug?extid=694120e1002c117747ed [1]
Reported-by: syzbot <syzbot+694120e1002c117747ed@syzkaller.appspotmail.com>
Fixes: 26abe143 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Fixes: 8a681736 ("net: sk_clone_lock() should only do get_net() if the parent is not a kernel socket")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+694120e1002c117747ed@syzkaller.appspotmail.com>
Link: https://lore.kernel.org/r/a5fb1fc4-2284-3359-f6a0-e4e390239d7b@I-love.SAKURA.ne.jpSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The program uses CLOCK_TAI as default clock since it was added to the
Linux repo. In commit:
| 04080634 ("selftests/net: so_txtime multi-host support")
a help text stating the wrong default clock was added.

This patch fixes the help text.

Fixes: 04080634 ("selftests/net: so_txtime multi-host support")
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220502094638.1921702-3-mkl@pengutronix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

This patch fixes the parsing of the cmd line supplied start time on 32
bit systems. A "long" on 32 bit systems is only 32 bit wide and cannot
hold a timestamp in nano second resolution.

Fixes: 04080634 ("selftests/net: so_txtime multi-host support")
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220502094638.1921702-2-mkl@pengutronix.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

In emulated environments, the bridge ports enslaved to br1 get a carrier
before changing br1's PVID. This means that by the time the PVID is
changed, br1 is already operational and configured with an IPv6
link-local address.

When the test is run with netdevs registered by mlxsw, changing the PVID
is vetoed, as changing the VID associated with an existing L3 interface
is forbidden. This restriction is similar to the 8021q driver's
restriction of changing the VID of an existing interface.

Fix this by taking br1 down and bringing it back up when it is fully
configured.

With this fix, the test reliably passes on top of both the SW and HW
data paths (emulated or not).

Fixes: 239e754a ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20220502084507.364774-1-idosch@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Radhey Shyam Pandey says:

====================
emaclite: improve error handling and minor cleanup

This patchset does error handling for of_address_to_resource() and also
removes "Don't advertise 1000BASE-T" and auto negotiation.

Changes for v3:
- Resolve git apply conflicts for 2/2 patch.

Changes for v2:
- Added Andrew's reviewed by tag in 1/2 patch.
- Move ret to down to align with reverse xmas tree style in 2/2 patch.
- Also add fixes tag in 2/2 patch.
- Specify tree name in subject prefix.
====================

Link: https://lore.kernel.org/r/1651476470-23904-1-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

check the return value of of_address_to_resource() and also add
missing of_node_put() for np and npp nodes.

Fixes: e0a3bc65 ("net: emaclite: Support multiple phys connected to one MDIO bus")
Addresses-Coverity: Event check_return value.
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

In xemaclite_open() function we are setting the max speed of
emaclite to 100Mb using phy_set_max_speed() function so,
there is no need to write the advertising registers to stop
giga-bit speed and the phy_start() function starts the
auto-negotiation so, there is no need to handle it separately
using advertising registers. Remove the phy_read and phy_write
of advertising registers in xemaclite_open() function.
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Convert B53 to use phylink_pcs for the serdes rather than hooking it
into the MAC-layer callbacks.

Fixes: 81c1681c ("net: dsa: b53: mark as non-legacy")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

with the usage of this function in nic_mbx_intr_handler().

Cache the Linux interrupt numbers in struct nicpf and use that cache in the
interrupt handler to select the mailbox.

Fixes: 495c66ac ("genirq/msi: Convert to new functions")
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2041772Signed-off-by: David S. Miller <davem@davemloft.net>

Duoming Zhou says:

====================
Replace improper checks and fix bugs in nfc subsystem

The first patch is used to replace improper checks in netlink related
functions of nfc core, the second patch is used to fix bugs in
nfcmrvl driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There are destructive operations such as nfcmrvl_fw_dnld_abort and
gpio_free in nfcmrvl_nci_unregister_dev. The resources such as firmware,
gpio and so on could be destructed while the upper layer functions such as
nfcmrvl_fw_dnld_start and nfcmrvl_nci_recv_frame is executing, which leads
to double-free, use-after-free and null-ptr-deref bugs.

There are three situations that could lead to double-free bugs.

The first situation is shown below:

   (Thread 1)                 |      (Thread 2)
nfcmrvl_fw_dnld_start         |
 ...                          |  nfcmrvl_nci_unregister_dev
 release_firmware()           |   nfcmrvl_fw_dnld_abort
  kfree(fw) //(1)             |    fw_dnld_over
                              |     release_firmware
  ...                         |      kfree(fw) //(2)
                              |     ...

The second situation is shown below:

   (Thread 1)                 |      (Thread 2)
nfcmrvl_fw_dnld_start         |
 ...                          |
 mod_timer                    |
 (wait a time)                |
 fw_dnld_timeout              |  nfcmrvl_nci_unregister_dev
   fw_dnld_over               |   nfcmrvl_fw_dnld_abort
    release_firmware          |    fw_dnld_over
     kfree(fw) //(1)          |     release_firmware
     ...                      |      kfree(fw) //(2)

The third situation is shown below:

       (Thread 1)               |       (Thread 2)
nfcmrvl_nci_recv_frame          |
 if(..->fw_download_in_progress)|
  nfcmrvl_fw_dnld_recv_frame    |
   queue_work                   |
                                |
fw_dnld_rx_work                 | nfcmrvl_nci_unregister_dev
 fw_dnld_over                   |  nfcmrvl_fw_dnld_abort
  release_firmware              |   fw_dnld_over
   kfree(fw) //(1)              |    release_firmware
                                |     kfree(fw) //(2)

The firmware struct is deallocated in position (1) and deallocated
in position (2) again.

The crash trace triggered by POC is like below:

BUG: KASAN: double-free or invalid-free in fw_dnld_over
Call Trace:
  kfree
  fw_dnld_over
  nfcmrvl_nci_unregister_dev
  nci_uart_tty_close
  tty_ldisc_kill
  tty_ldisc_hangup
  __tty_hangup.part.0
  tty_release
  ...

What's more, there are also use-after-free and null-ptr-deref bugs
in nfcmrvl_fw_dnld_start. If we deallocate firmware struct, gpio or
set null to the members of priv->fw_dnld in nfcmrvl_nci_unregister_dev,
then, we dereference firmware, gpio or the members of priv->fw_dnld in
nfcmrvl_fw_dnld_start, the UAF or NPD bugs will happen.

This patch reorders destructive operations after nci_unregister_device
in order to synchronize between cleanup routine and firmware download
routine.

The nci_unregister_device is well synchronized. If the device is
detaching, the firmware download routine will goto error. If firmware
download routine is executing, nci_unregister_device will wait until
firmware download routine is finished.

Fixes: 3194c687 ("NFC: nfcmrvl: add firmware download support")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

The device_is_registered() in nfc core is used to check whether
nfc device is registered in netlink related functions such as
nfc_fw_download(), nfc_dev_up() and so on. Although device_is_registered()
is protected by device_lock, there is still a race condition between
device_del() and device_is_registered(). The root cause is that
kobject_del() in device_del() is not protected by device_lock.

   (cleanup task)         |     (netlink task)
                          |
nfc_unregister_device     | nfc_fw_download
 device_del               |  device_lock
  ...                     |   if (!device_is_registered)//(1)
  kobject_del//(2)        |   ...
 ...                      |  device_unlock

The device_is_registered() returns the value of state_in_sysfs and
the state_in_sysfs is set to zero in kobject_del(). If we pass check in
position (1), then set zero in position (2). As a result, the check
in position (1) is useless.

This patch uses bool variable instead of device_is_registered() to judge
whether the nfc device is registered, which is well synchronized.

Fixes: 3e256b8f ("NFC: add nfc subsystem core")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Based on DesignWare Ethernet QoS datasheet, we are seeing the limitation
of Split Header (SPH) feature is not supported for Ipv4 fragmented packet.
This SPH limitation will cause ping failure when the packets size exceed
the MTU size. For example, the issue happens once the basic ping packet
size is larger than the configured MTU size and the data is lost inside
the fragmented packet, replaced by zeros/corrupted values, and leads to
ping fail.

So, disable the Split Header for Intel platforms.

v2: Add fixes tag in commit message.

Fixes: 67afd6d1("net: stmmac: Add Split Header support and enable it in XGMAC cores")
Cc: <stable@vger.kernel.org> # 5.10.x
Suggested-by: Ong, Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Whenever RCU protected list replaces an object,
the pointer to the new object needs to be updated
_before_ the call to kfree_rcu() or call_rcu()

Also ip6_mc_msfilter() needs to update the pointer
before releasing the mc_lock mutex.

Note that linux-5.13 was supporting kfree_rcu(NULL, rcu),
so this fix does not need the conditional test I was
forced to use in the equivalent patch for IPv4.

Fixes: 882ba1f7 ("mld: convert ipv6_mc_socklist->sflist to RCU")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>