Until now, two fields, gpio_data and gpio_led, coexist in alc_spec
although basically both of them serve for the same purpose -- the GPIO
data bits.

This patch consolidates both usages and eliminates the superfluous
gpio_led field.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

For updating GPIO bits dynamically, provide a new helper, and use it
from the alc260 automute hook.  This helper will be used by other
places in future, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Currently the GPIO bits are managed by individual verbs in some cases
while toggled dynamically in other cases.  For simplifying the GPIO
management, define the GPIO mask, dir and data bits in alc_spec
fields, and refer to / set them consistently from all places.

As a first step, along with the definition of the new gpio_* fields,
this patch replaces the static verbs that are used at initialization
and fixups with the common helper functions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Some devices have the overrides of spec->init_amp at
HDA_FIXUP_ACT_PROBE just because alc_ssid_check() gives the
false-positive values from the SSID.

For more consistent behavior, define the logic in the following way:

- Define ALC_INIT_UNDEFINED as the default value before calling
  alc_ssid_check()
- Each fixup may set up spec->init_amp with another value at
  HDA_FIXUP_ACT_PRE_PROBE
- At detection, check whether spec->init_amp is ALC_INIT_UNDEFINED or
  not; if it's different, we skip the detection

Also, it turned out that ASUS TX300 requires the spec->init_amp
override, too; currently it ignores the GPIO bits implicitly by its
static init verb, but this will be changed in the later patchset.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add a devicetree binding for codecs. This is especially useful if the
AC97 bitclk clock is provided by the codec, as it has to be described in
the devicetree description for the ac97 bus code to aquire it.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add the generic ac97 bus binding, especially for ac97 codecs discovered
by ac97 hardware probing.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

alc269_fixup_hp_line1_mic1_led() can be simplified more with the
existing helper code.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

There are a couple of places setting cap_sync_hook in the codec
drivers, and they just overwrite the value.  Add a sanity check via
WARN_ON() in case if an old non-NULL value is overridden and
forgotten.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

To simplify the code and to get the mic-mute LED behavior control, use
the new helper function for controlling the mic mute LED instead of
open-codes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Instead of refusing, allow the configuration with the multiple ADCs
(thus multiple capture switches) for enabling the mic mute LED.
This has been done for Sigmatel/IDT codecs, and we treat the OR-ed
values from all capture switches as the boolean condition.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Convert to use the common helper for controlling the mic mute LED for
HP laptops, just as we've done for Realtek codecs.  This will give the
mic mute LED enum as gratis.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Similar as the previous commit, convert to use the common helper for
controlling the mic mute LED for HP and other machines in the Realtek
codec driver, too.  This will give the mic mute LED enum as gratis.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Use the new common helper for setting up and controlling the mic mute
LED over thinkpad_acpi.  This also provides a new mixer enum "Mic
Mute-LED Mode" (that was present only for Dell models), which allows
user to choose the mic mute LED behavior.  For example, if you want
the mic mute LED turned on only while mic is on, choose "Follow
Capture" there.
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Move the code for setting up and controlling the mic mute LED hook
from dell-wmi helper to the generic parser, so that it can be referred
from the multiple driver codes.

No functional change.
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This commit adds support for MOTU Traveler, launched in 2005, discontinued
quite before. As a result, transmission of PCM frame and MIDI messages is
available via ALSA PCM and RawMIDI/Sequencer interfaces.

This model supports sampling transmission frequency up to 192.0 kHz, and
AES/EBU on XLR interface and ADAT on optical interface. Unlike
Motu 828MkII, Windows driver can switch fetching mode for DSP, like
mute/unmute feature.

Although this commit enables high sampling transmission frequency, actual
sound from this model is not good. As long as I tested, it's silence at
176.4 kHz, and it includes hissing noise at 192.0 kHz. In my opinion, as I
reported at 3526ce7f9ba7 ('ALSA: firewire-motu: add MOTU specific protocol
layer'), timestamping on source packet header (SPH) may not still be good
for this model as well.

$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  04106505  bus_info_length 4, crc_length 16, crc 25861
404  31333934  bus_name "1394"
408  20001000  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c  0001f200  company_id 0001f2     |
410  0001f32f  device_id 000001f32f  | EUI-64 0001f2000001f32f

               root directory
               -----------------------------------------------------------------
414  0004c65c  directory_length 4, crc 50780
418  030001f2  vendor
41c  0c0083c0  node capabilities per IEEE 1394
420  8d000006  --> eui-64 leaf at 438
424  d1000001  --> unit directory at 428

               unit directory at 428
               -----------------------------------------------------------------
428  00035955  directory_length 3, crc 22869
42c  120001f2  specifier id
430  13000009  version
434  17107800  model

               eui-64 leaf at 438
               -----------------------------------------------------------------
438  000206b2  leaf_length 2, crc 1714
43c  0001f200  company_id 0001f2     |
440  0001f32f  device_id 000001f32f  | EUI-64 0001f2000001f32f
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

For MOTU protocol version 2, this driver arranges the number of data
chunks to align chunks to quadlet data channel. However, MOTU Traveler
has padding bytes in the end of data block at high clock mode.

This commit removes the arrangement. Fortunately, at low and middle clock
mode, supported model for v2 protocol (828mkII) gets no influence from this
change because all of combination for data chunks are just aligned to
quadlet data channel.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

MOTU Traveler supports AES/EBU on XLR interface and data block of rx/tx
packet includes two chunk for the interface. This commit adds a flag
for this purpose.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This driver explicitly assumes that all of supported models have main data
chunk separated from chunk for analog ports. However, MOTU Traveler doesn't
support the separated main data chunk.

This commit adds a flag for the separated main data chunk.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

In MOTU firewire protocol, data block consists of 24 bit data chunks except
for one quadlet for source packet header (SPH). The number of data chunk in
a data block is different between three clock modes; low, middle and high.
When unit supports ADAT on optical interface, the data block includes some
chunks for ADAT channels. These ADAT chunks are unavailable at high mode.

This driver has local functions to calculate the number of ADAT chunks. But
They uses stack for three clock modes. This is useless for higher mode.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The get_seconds() function is deprecated because it truncates the
timestamp to 32 bits, so all users should change to ktime_get_seconds()
or ktime_get_real_seconds().

The firmware interface for passing the timestamp is also limited to
32 bits, so this patch only has the cosmetic effect of avoiding the
old interface.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Currently a variable of type enum CT_AMIXER_CTL is used for enum
CT_SUM_CTL values. This leads to warnings when using clang:
sound/pci/ctxfi/ctmixer.c:945:32: warning: implicit conversion from enumeration type
      'enum CT_SUM_CTL' to different enumeration type 'enum CT_AMIXER_CTL'
      [-Wenum-conversion]
        for (i = AMIXER_MASTER_F, j = SUM_IN_F;
                                    ~ ^~~~~~~~
sound/pci/ctxfi/ctmixer.c:975:29: warning: implicit conversion from enumeration type
      'enum CT_SUM_CTL' to different enumeration type 'enum CT_AMIXER_CTL'
      [-Wenum-conversion]
        for (i = AMIXER_PCM_F, j = SUM_IN_F; i <= AMIXER_PCM_S; i++, j++) {
                                 ~ ^~~~~~~~

Introduce enum CT_SUM_CTL k and it instead.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This fixes a warning seen with clang:

sound/pci/ice1712/prodigy_hifi.c:321:28: warning: variable 'wm_vol' is not
      needed and will not be emitted [-Wunneeded-internal-declaration]
static const unsigned char wm_vol[256] = {
                           ^
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The commentary says to use various parameters, and lays out what
the mapping is...  The code used a 32KHz rate when the comment
says that it needs to use a 48KHz rate.  And this has been the
case since day one.

On the Alienware M17x R4, the DMic used to have exceptionally quiet
pickup and a lot of noise.  Changing the data rate fixes both of
these issues.

Searching the kernel bug tracker for ca0132-related issues shows no
mention of this being an issue for other hardware, and I have no
other hardware to test with, so a quirk is used to limit the effect
to just the M17x R4.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Commit 009b8f97 conditionalized
adding the "CA0132 Analog Mic-In2" PCM with a comment to the
effect that, "desktops don't use this ADC", but the test was set
up such that the ADC was only created for desktops.  Invert the
test.

Fixes: 009b8f97 ("ALSA: hda/ca0132: update core functions for sbz + r3di")
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

QUIRK_NONE is, quite explicitly, the default case.  The entire
point of a quirks system is to allow "programming by difference"
from a given base case, which requires that merely defining a new
quirk for some piece of hardware should not change the behavior of
the driver for that hardware.  In turn, this means that testing
for QUIRK_NONE explicitly is a violation of that implicit contract.

Change a test for QUIRK_NONE and QUIRK_ALIENWARE to default, and
add a test for QUIRK_SBZ to disable the default behavior in that
instance.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Commit e93ac30a (ALSA: HDA/ca0132:
add extra init functions for r3di + sbz) introduced an extra
initialization function that was improperly guarded, taking effect
on systems with QUIRK_ALIENWARE, even though such systems were
supposedly not affected.

It may be that this piece of initialization should be done for all
systems, but that's not a call that I can make.

Fixes: e93ac30a ("ALSA: HDA/ca0132: add extra init functions for r3di + sbz")
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

During ca0132_init(), ca0132_init_unsol() is run before the
spec->spec_init_verbs are written.  ca0132_init_unsol() calls
snd_hda_jack_detect_enable_callback(), which requests UNSOL events
for three or four nodes, two of which were also (redundantly)
requested by spec_init_verbs.

Kill the redundant AC_VERB_SET_UNSOLICITED_ENABLE verbs.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ca0132_config() was setting some values in the auto_pin_cfg for
the codec... but it is called prior to snd_hda_parse_pin_defcfg(),
which does a memset() to clear the entire structure as one of its
first actions, making the entire exercise pointless.

Kill all use of struct auto_pin_cfg from ca0132_config().
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Some Lenovo laptops, e.g. Lenovo P50, showed the pop noise at resume
or runtime resume.  It turned out to be reduced by applying
alc_no_shutup() just like TPT440 quirk does.

Since there are many Lenovo models showing the same behavior, put this
workaround in ALC269_FIXUP_THINKPAD_ACPI entry so that it's applied
commonly to all such Lenovo machines.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Benjamin Berg <bberg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull block fixes from Jens Axboe:
 "A collection of fixes that should go into -rc1. This contains:

   - bsg_open vs bsg_unregister race fix (Anatoliy)

   - NVMe pull request from Christoph, with fixes for regressions in
     this window, FC connect/reconnect path code unification, and a
     trace point addition.

   - timeout fix (Christoph)

   - remove a few unused functions (Christoph)

   - blk-mq tag_set reinit fix (Roman)"

* tag 'for-linus-20180616' of git://git.kernel.dk/linux-block:
  bsg: fix race of bsg_open and bsg_unregister
  block: remov blk_queue_invalidate_tags
  nvme-fabrics: fix and refine state checks in __nvmf_check_ready
  nvme-fabrics: handle the admin-only case properly in nvmf_check_ready
  nvme-fabrics: refactor queue ready check
  blk-mq: remove blk_mq_tagset_iter
  nvme: remove nvme_reinit_tagset
  nvme-fc: fix nulling of queue data on reconnect
  nvme-fc: remove reinit_request routine
  blk-mq: don't time out requests again that are in the timeout handler
  nvme-fc: change controllers first connect to use reconnect path
  nvme: don't rely on the changed namespace list log
  nvmet: free smart-log buffer after use
  nvme-rdma: fix error flow during mapping request data
  nvme: add bio remapping tracepoint
  nvme: fix NULL pointer dereference in nvme_init_subsystem
  blk-mq: reinit q->tag_set_list entry only after grace period

Pull documentation fixes from Mauro Carvalho Chehab:
 "This solves a series of broken links for files under Documentation,
  and improves a script meant to detect such broken links (see
  scripts/documentation-file-ref-check).

  The changes on this series are:

   - can.rst: fix a footnote reference;

   - crypto_engine.rst: Fix two parsing warnings;

   - Fix a lot of broken references to Documentation/*;

   - improve the scripts/documentation-file-ref-check script, in order
     to help detecting/fixing broken references, preventing
     false-positives.

  After this patch series, only 33 broken references to doc files are
  detected by scripts/documentation-file-ref-check"

* tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental: (26 commits)
  fix a series of Documentation/ broken file name references
  Documentation: rstFlatTable.py: fix a broken reference
  ABI: sysfs-devices-system-cpu: remove a broken reference
  devicetree: fix a series of wrong file references
  devicetree: fix name of pinctrl-bindings.txt
  devicetree: fix some bindings file names
  MAINTAINERS: fix location of DT npcm files
  MAINTAINERS: fix location of some display DT bindings
  kernel-parameters.txt: fix pointers to sound parameters
  bindings: nvmem/zii: Fix location of nvmem.txt
  docs: Fix more broken references
  scripts/documentation-file-ref-check: check tools/*/Documentation
  scripts/documentation-file-ref-check: get rid of false-positives
  scripts/documentation-file-ref-check: hint: dash or underline
  scripts/documentation-file-ref-check: add a fix logic for DT
  scripts/documentation-file-ref-check: accept more wildcards at filenames
  scripts/documentation-file-ref-check: fix help message
  media: max2175: fix location of driver's companion documentation
  media: v4l: fix broken video4linux docs locations
  media: dvb: point to the location of the old README.dvb-usb file
  ...

Pull fsnotify updates from Jan Kara:
 "fsnotify cleanups unifying handling of different watch types.

  This is the shortened fsnotify series from Amir with the last five
  patches pulled out. Amir has modified those patches to not change
  struct inode but obviously it's too late for those to go into this
  merge window"

* tag 'fsnotify_for_v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fsnotify: add fsnotify_add_inode_mark() wrappers
  fanotify: generalize fanotify_should_send_event()
  fsnotify: generalize send_to_group()
  fsnotify: generalize iteration of marks by object type
  fsnotify: introduce marks iteration helpers
  fsnotify: remove redundant arguments to handle_event()
  fsnotify: use type id to identify connector object type

Pull fbdev updates from Bartlomiej Zolnierkiewicz:
 "There is nothing really major here, few small fixes, some cleanups and
  dead drivers removal:

   - mark omapfb drivers as orphans in MAINTAINERS file (Tomi Valkeinen)

   - add missing module license tags to omap/omapfb driver (Arnd
     Bergmann)

   - add missing GPIOLIB dependendy to omap2/omapfb driver (Arnd
     Bergmann)

   - convert savagefb, aty128fb & radeonfb drivers to use msleep & co.
     (Jia-Ju Bai)

   - allow COMPILE_TEST build for viafb driver (media part was reviewed
     by media subsystem Maintainer)

   - remove unused MERAM support from sh_mobile_lcdcfb and shmob-drm
     drivers (drm parts were acked by shmob-drm driver Maintainer)

   - remove unused auo_k190xfb drivers

   - misc cleanups (Souptick Joarder, Wolfram Sang, Markus Elfring, Andy
     Shevchenko, Colin Ian King)"

* tag 'fbdev-v4.18' of git://github.com/bzolnier/linux: (26 commits)
  fb_omap2: add gpiolib dependency
  video/omap: add module license tags
  MAINTAINERS: make omapfb orphan
  video: fbdev: pxafb: match_string() conversion fixup
  video: fbdev: nvidia: fix spelling mistake: "scaleing" -> "scaling"
  video: fbdev: fix spelling mistake: "frambuffer" -> "framebuffer"
  video: fbdev: pxafb: Convert to use match_string() helper
  video: fbdev: via: allow COMPILE_TEST build
  video: fbdev: remove unused sh_mobile_meram driver
  drm: shmobile: remove unused MERAM support
  video: fbdev: sh_mobile_lcdcfb: remove unused MERAM support
  video: fbdev: remove unused auo_k190xfb drivers
  video: omap: Improve a size determination in omapfb_do_probe()
  video: sm501fb: Improve a size determination in sm501fb_probe()
  video: fbdev-MMP: Improve a size determination in path_init()
  video: fbdev-MMP: Delete an error message for a failed memory allocation in two functions
  video: auo_k190x: Delete an error message for a failed memory allocation in auok190x_common_probe()
  video: sh_mobile_lcdcfb: Delete an error message for a failed memory allocation in two functions
  video: sh_mobile_meram: Delete an error message for a failed memory allocation in sh_mobile_meram_probe()
  video: fbdev: sh_mobile_meram: Drop SUPERH platform dependency
  ...

Pull AFS updates from Al Viro:
 "Assorted AFS stuff - ended up in vfs.git since most of that consists
  of David's AFS-related followups to Christoph's procfs series"

* 'afs-proc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  afs: Optimise callback breaking by not repeating volume lookup
  afs: Display manually added cells in dynamic root mount
  afs: Enable IPv6 DNS lookups
  afs: Show all of a server's addresses in /proc/fs/afs/servers
  afs: Handle CONFIG_PROC_FS=n
  proc: Make inline name size calculation automatic
  afs: Implement network namespacing
  afs: Mark afs_net::ws_cell as __rcu and set using rcu functions
  afs: Fix a Sparse warning in xdr_decode_AFSFetchStatus()
  proc: Add a way to make network proc files writable
  afs: Rearrange fs/afs/proc.c to remove remaining predeclarations.
  afs: Rearrange fs/afs/proc.c to move the show routines up
  afs: Rearrange fs/afs/proc.c by moving fops and open functions down
  afs: Move /proc management functions to the end of the file

Pull compat updates from Al Viro:
 "Some biarch patches - getting rid of assorted (mis)uses of
  compat_alloc_user_space().

  Not much in that area this cycle..."

* 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  orangefs: simplify compat ioctl handling
  signalfd: lift sigmask copyin and size checks to callers of do_signalfd4()
  vmsplice(): lift importing iovec into vmsplice(2) and compat counterpart

Pull aio fixes from Al Viro:
 "Assorted AIO followups and fixes"

* 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  eventpoll: switch to ->poll_mask
  aio: only return events requested in poll_mask() for IOCB_CMD_POLL
  eventfd: only return events requested in poll_mask()
  aio: mark __aio_sigset::sigmask const

Pull networking fixes from David Miller:

 1) Various netfilter fixlets from Pablo and the netfilter team.

 2) Fix regression in IPVS caused by lack of PMTU exceptions on local
    routes in ipv6, from Julian Anastasov.

 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia.

 4) Don't crash on poll in TLS, from Daniel Borkmann.

 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things
    including Avahi mDNS. From Bart Van Assche.

 6) Missing of_node_put in qcom/emac driver, from Yue Haibing.

 7) We lack checking of the TCP checking in one special case during SYN
    receive, from Frank van der Linden.

 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg.

 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman.

10) Must grab HW caps before doing quirk checks in stmmac driver, from
    Jose Abreu.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
  net: stmmac: Run HWIF Quirks after getting HW caps
  neighbour: skip NTF_EXT_LEARNED entries during forced gc
  net: cxgb3: add error handling for sysfs_create_group
  tls: fix waitall behavior in tls_sw_recvmsg
  tls: fix use-after-free in tls_push_record
  l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()
  l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels
  mlxsw: spectrum_switchdev: Fix port_vlan refcounting
  mlxsw: spectrum_router: Align with new route replace logic
  mlxsw: spectrum_router: Allow appending to dev-only routes
  ipv6: Only emit append events for appended routes
  stmmac: added support for 802.1ad vlan stripping
  cfg80211: fix rcu in cfg80211_unregister_wdev
  mac80211: Move up init of TXQs
  mac80211_hwsim: fix module init error paths
  cfg80211: initialize sinfo in cfg80211_get_station
  nl80211: fix some kernel doc tag mistakes
  hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload
  rds: avoid unenecessary cong_update in loop transport
  l2tp: clean up stale tunnel or session in pppol2tp_connect's error path
  ...

Pull module updates from Jessica Yu:
 "Minor code cleanup and also allow sig_enforce param to be shown in
  sysfs with CONFIG_MODULE_SIG_FORCE"

* tag 'modules-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: Allow to always show the status of modsign
  module: Do not access sig_enforce directly