- 08 Mar, 2019 1 commit
-
-
Sean Paul authored
Merge tag 'topic/hdr-formats-2019-03-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-misc-next Add support for Y21x and Y41x to drm core and i915, and P01x support to i915. Signed-off-by:
Sean Paul <seanpaul@chromium.org> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f2485309-d645-bed4-95f4-e66ff312aa05@linux.intel.com
-
- 07 Mar, 2019 6 commits
-
-
Qiang Yu authored
For other driver like lima usage. Cc: Rob Herring <robh@kernel.org> Signed-off-by:
Qiang Yu <yuq825@gmail.com> Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190225140717.20586-2-yuq825@gmail.com
-
Maxime Ripard authored
The current code, since commit bb43d40d ("drm/sun4i: rgb: Validate the clock rate"), perform some validation on the pixel clock to filter out the EDID modes provided by monitors (through bridges) that we wouldn't be able to reach. For the usual modes, we're able to generate a perfect clock rate, so a strict check was enough. However, this had the side effect of preventing displays that would work otherwise to operate properly, since we would pretty much never be able to generate an exact rate for those displays, even though we would fall within that panel tolerance. This was also shown to happen for unusual modes exposed through EDIDs, for example on eDP panels. We can work around this by simplifying a bit the problem: no panels we've encountered so far actually needed that check. All of them are tied to a particular board when it is produced, and made to work with the Allwinner BSP. That pretty much guarantees that we never have a pixel clock out of reach. On the other hand, the EDIDs modes that needed to be validated have always been exposed through bridges. Let's just use that metric to instead of validating all modes, only validate modes when we have a bridge attached. It should be good enough for now, while we still have room for improvements or refinements using the display_timings structure for example for panels. We also add a tolerance for EDID-based modes instead of doing a strict check. This tolerance is of 0.5% which is the one advertised in the VESA DVT and CVT specs. If that needed to be extended in the future, we can add a custom module parameter to relax it a bit. Fixes: bb43d40d ("drm/sun4i: rgb: Validate the clock rate") Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> # tested on pinebook Reviewed-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/ec2dc2a7b3d4bd44f7a2a6e1c1813f92449a7310.1551191081.git-series.maxime.ripard@bootlin.com
-
Maxime Ripard authored
Our clock rate variables are getting pretty close to the LONG_MAX / ULONG_MAX limit, especially since we will start doing arithmetic on it. Move those types to unsigned long long to be sure we don't overflow their type. Signed-off-by:
-
Maxime Ripard authored
We'll need the bridge pointer, if any, in the mode_valid callback in addition to the init function. Store the pointer to the bridge in the rgb private structure. Signed-off-by:
-
Maxime Ripard authored
The TCON driver used to need the panel pointer in order to configure the tcon according to the various parameters of the panel. However, this has evolved over time (especially to support bridges), and therefore the panel pointer isn't needed anymore by the TCON driver. Move that pointer to the LVDS and RGB encoders drivers. Signed-off-by:
-
Maxime Ripard authored
The preferred bpp for the fbdev emulation buffer has been 32 so far, which means that by default we will allocate an 8MB buffer with a 1920x1080 resolution. Worse this memory will be allocated from the CMA pool, and will never be freed even if we don't use the fbdev emulation. Therefore, reducing it is a big deal, and switching to 16bpp by default will gain us around 4MB at 1920x1080, while keeping decent color depth. And users still have the option to switch to 32bpp using the kernel command line. Signed-off-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
-
- 06 Mar, 2019 4 commits
-
-
Sean Paul authored
Picking up v5.0 + missed misc-fixes from last release Signed-off-by: -
Paul Kocialkowski authored
In order to test whether the load tracker is working as expected, we need the ability to compare the commit result with the underrun indication. With the load tracker always enabled, commits that are expected to trigger an underrun are always rejected, so userspace cannot get the actual underrun indication from the hardware. Add a debugfs entry to disable/enable the load tracker, so that a DRM commit expected to trigger an underrun can go through with the load tracker disabled. The underrun indication is then available to userspace and can be checked against the commit result with the load tracker enabled. Signed-off-by:
-
Boris Brezillon authored
The HVS block is supposed to fill the pixelvalve FIFOs fast enough to meet the requested framerate. The problem is, the HVS and memory bus bandwidths are limited, and if we don't take these limitations into account we might end up with HVS underflow errors. This patch is trying to model the per-plane HVS and memory bus bandwidth consumption and take a decision at atomic_check() time whether the estimated load will fit in the HVS and membus budget. Note that we take an extra margin on the memory bus consumption to let the system run smoothly when other blocks are doing heavy use of the memory bus. Same goes for the HVS limit, except the margin is smaller in this case, since the HVS is not used by external components. Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Boris Brezillon authored
Add a debugfs entry and helper for reporting HVS underrun errors as well as helpers for masking and unmasking the underrun interrupts. Add an IRQ handler and initial IRQ configuration. Rework related register definitions to take the channel number. Signed-off-by:
-
- 05 Mar, 2019 9 commits
-
-
David Francis authored
The DP 1.4 spec defines the SDP header and SDP contents for a Picture Parameter Set (PPS) that must be sent in advance of DSC transmission to define the encoding characteristics. This was done in one struct, drm_dsc_pps_infoframe, which conatined the SDP header and PPS. Because the PPS is a property of DSC over any connector, not just DP, and because drm drivers may have their own SDP structs they wish to use, make the functions that initialise SDP and PPS headers take the components they operate on, not drm_dsc_pps_infoframe, Signed-off-by:
David Francis <David.Francis@amd.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190221202001.28430-4-David.Francis@amd.com
-
David Francis authored
Native 420 and 422 transfer modes are new in DSC1.2 In these modes, each two pixels of a slice are treated as one pixel, so the slice width is half as large (round down) for the purposes of calucating the groups per line and chunk size in bytes In native 422 mode, each pixel has four components, so the mux component of a group is larger by one additional mux word and one additional component Now that there is native 422 support, the configuration option previously called enable422 is renamed to simple_422 to avoid confusion Acked-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
David Francis authored
The function intel_compute_rc_parameters is part of the dsc spec and is not driver-specific. Other drm drivers might like to use it. The function is not changed; just moved and renamed. Reviewed-by:
-
Swati Sharma authored
Signed-off-by:
Swati Sharma <swati2.sharma@intel.com> Signed-off-by:
Vidya Srinivas <vidya.srinivas@intel.com> Reviewed-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Swati Sharma authored
Added needed plane control flag definitions for Y2xx and Y4xx (10, 12 and 16 bits) Signed-off-by:
-
Swati Sharma authored
The following pixel formats are packed format that follows 4:2:2 chroma sampling. For memory represenation each component is allocated 16 bits each. Thus each pixel occupies 32bit. Y210: For each component, valid data occupies MSB 10 bits. LSB 6 bits are filled with zeroes. Y212: For each component, valid data occupies MSB 12 bits. LSB 4 bits are filled with zeroes. Y216: For each component valid data occupies 16 bits, doesn't require any padding bits. First 16 bits stores the Y value and the next 16 bits stores one of the chroma samples alternatively. The first luma sample will be accompanied by first U sample and second luma sample is accompanied by the first V sample. The following pixel formats are packed format that follows 4:4:4 chroma sampling. Channels are arranged in the order UYVA in increasing memory order. Y410: Each color component occupies 10 bits and X component takes 2 bits, thus each pixel occupies 32 bits. Y412: Each color component is 16 bits where valid data occupies MSB 12 bits. LSB 4 bits are filled with zeroes. Thus, each pixel occupies 64 bits. Y416: Each color component occupies 16 bits for valid data, doesn't require any padding bits. Thus, each pixel occupies 64 bits. v3: fixed missing tab for XYUV8888 (JP) Signed-off-by:
-
Juha-Pekka Heikkila authored
Enabling of P010, P012 and P016 formats. These formats will extend NV12 for larger bit depths. Signed-off-by:
-
Juha-Pekka Heikkila authored
Preparations for enabling P010, P012 and P016 formats. These formats will extend NV12 for larger bit depths. Signed-off-by:
-
Juha-Pekka Heikkila authored
Add needed plane control flag definitions for P010, P012 and P016 formats. Signed-off-by:
-
- 04 Mar, 2019 11 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-fixes for v5.0: - Block fb changes for async atomic updates to prevent a use after free. - Fix ID mismatch error on load in bochs. - Fix memory leak when drm_setup fails. - Fixes around handling of DRM_AUTH. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/42113611-e2cd-6bdd-7de5-4f8ab5a0cbe6@linux.intel.com
-
Mario Kleiner authored
In VRR mode, keep track of the vblank count of the last completed pageflip in amdgpu_crtc->last_flip_vblank, as recorded in the pageflip completion handler after each completed flip. Use that count to prevent mmio programming a new pageflip within the same vblank in which the last pageflip completed, iow. to throttle pageflips to at most one flip per video frame, while at the same time allowing to request a flip not only before start of vblank, but also anywhere within vblank. The old logic did the same, and made sense for regular fixed refresh rate flipping, but in vrr mode it prevents requesting a flip anywhere inside the possibly huge vblank, thereby reducing framerate in vrr mode instead of improving it, by delaying a slightly delayed flip requests up to a maximum vblank duration + 1 scanout duration. This would limit VRR usefulness to only help applications with a very high GPU demand, which can submit the flip request before start of vblank, but then have to wait long for fences to complete. With this method a flip can be both requested and - after fences have completed - executed, ie. it doesn't matter if the request (amdgpu_dm_do_flip()) gets delayed until deep into the extended vblank due to cpu execution delays. This also allows clients which want to regulate framerate within the vrr range a much more fine-grained control of flip timing, a feature that might be useful for video playback, and is very useful for neuroscience/vision research applications. In regular non-VRR mode, retain the old flip submission behavior. This to keep flip scheduling for fullscreen X11/GLX OpenGL clients intact, if they use the GLX_OML_sync_control extensions glXSwapBufferMscOML(, ..., target_msc,...) function with a specific target_msc target vblank count. glXSwapBuffersMscOML() or DRI3/Present PresentPixmap() will not flip at the proper target_msc for a non-zero target_msc if VRR mode is active with this patch. They'd often flip one frame too early. However, this limitation should not matter much in VRR mode, as scheduling based on vblank counts is pretty futile/unusable under variable refresh duration anyway, so no real extra harm is done. According to some testing already done with this patch by Nicholas on top of my tests, IGT tests didn't report any problems. If fixes stuttering and flickering when flipping at rates below the minimum vrr refresh rate. Fixes: bb47de73 ("drm/amdgpu: Set FreeSync state using drm VRR properties") Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Cc: <stable@vger.kernel.org> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Michel Dänzer <michel@daenzer.net> Tested-by:
Bruno Filipe <bmilreu@gmail.com> Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a DRM_NOTE message. Fix this. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Noralf Trønnes authored
This protects device resources from use after device removal. There are 3 ways for driver-device unbinding to happen: - The driver module is unloaded causing the driver to be unregistered. This can't happen as long as there are open file handles because a reference is taken on the module. - The device is removed (Device Tree overlay unloading). This can happen at any time. - The driver sysfs unbind file can be used to unbind the driver from the device. This can happen any time. v2: Since drm_atomic_helper_shutdown() has to be called after drm_dev_unplug() we don't want do block ->disable after unplug. Signed-off-by:Noralf Trønnes <noralf@tronnes.org> Acked-by:
Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-8-noralf@tronnes.org
-
Noralf Trønnes authored
No more users left so it can go alongside its helpers. Update the tinydrm docs description and remove todo entry. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-7-noralf@tronnes.org
-
Noralf Trønnes authored
Use devm_drm_dev_init() and drop using tinydrm_device. v2: devm_drm_dev_register() was dropped so add driver release callbacks. Signed-off-by:
-
Noralf Trønnes authored
Use devm_drm_dev_init() and drop using tinydrm_device. v2: devm_drm_dev_register() was dropped so add a driver release callback. Signed-off-by:
-
Noralf Trønnes authored
Add driver example that shows how devm_drm_dev_init() can be used. v2: Expand docs (Sam, Daniel) Signed-off-by:
-
Noralf Trønnes authored
This adds a resource managed (devres) version of drm_dev_init(). v2: Remove devm_drm_dev_register() since we can't touch hw in devm release functions and drivers want to disable hw on driver module unload (Daniel Vetter, Greg KH) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: -
Noralf Trønnes authored
This makes it safe to access drm_device->dev after the parent device has been removed/unplugged. Signed-off-by:
-
Dave Airlie authored
There is a really hairy resolution involving amdgpu fixes, that I'd rather confirm here. Also some misc fixes are landed by me, but the pr has them as well. Signed-off-by:
-
- 03 Mar, 2019 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "One more set of simple ARM platform fixes: - A boot regression on qualcomm msm8998 - Gemini display controllers got turned off by accident - incorrect reference counting in optee" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: tee: optee: add missing of_node_put after of_device_is_available arm64: dts: qcom: msm8998: Extend TZ reserved memory area ARM: dts: gemini: Re-enable display controller
-
- 02 Mar, 2019 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Two last minute fixes: - Prevent value evaluation via functions happening in the user access enabled region of __put_user() (put another way: make sure to evaluate the value to be stored in user space _before_ enabling user space accesses) - Correct the definition of a Hyper-V hypercall constant" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hyper-v: Fix definition of HV_MAX_FLUSH_REP_COUNT x86/uaccess: Don't leak the AC flag into __put_user() value evaluation -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Nine small fixes. The resume fix is a cosmetic removal of a warning with an incorrect condition causing it to alarm people wrongly. The other eight patches correct a thinko in Christoph Hellwig's DMA conversion series. Without it all these drivers end up with 32 bit DMA masks meaning they bounce any page over 4GB before sending it to the controller. Nowadays, even laptops mostly have memory above 4GB, so this can lead to significant performance degradation with all the bouncing" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: Avoid that system resume triggers a kernel warning scsi: hptiop: fix calls to dma_set_mask() scsi: hisi_sas: fix calls to dma_set_mask_and_coherent() scsi: csiostor: fix calls to dma_set_mask_and_coherent() scsi: bfa: fix calls to dma_set_mask_and_coherent() scsi: aic94xx: fix calls to dma_set_mask_and_coherent() scsi: 3w-sas: fix calls to dma_set_mask_and_coherent() scsi: 3w-9xxx: fix calls to dma_set_mask_and_coherent() scsi: lpfc: fix calls to dma_set_mask_and_coherent()
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix refcount leak in act_ipt during replace, from Davide Caratti. 2) Set task state properly in tun during blocking reads, from Timur Celik. 3) Leaked reference in DSA, from Wen Yang. 4) NULL deref in act_tunnel_key, from Vlad Buslov. 5) cipso_v4_erro can reference the skb IPCB in inappropriate contexts thus referencing garbage, from Nazarov Sergey. 6) Don't accept RTA_VIA and RTA_GATEWAY in contexts where those attributes make no sense. 7) Fix hung sendto in tipc, from Tung Nguyen. 8) Out-of-bounds access in netlabel, from Paul Moore. 9) Grant reference leak in xen-netback, from Igor Druzhinin. 10) Fix tx stalls with lan743x, from Bryan Whitehead. 11) Fix interrupt storm with mv88e6xxx, from Hein Kallweit. 12) Memory leak in sit on device registry failure, from Mao Wenan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) net: sit: fix memory leak in sit_init_net() net: dsa: mv88e6xxx: Fix statistics on mv88e6161 geneve: correctly handle ipv6.disable module parameter net: dsa: mv88e6xxx: prevent interrupt storm caused by mv88e6390x_port_set_cmode bpf: fix sanitation rewrite in case of non-pointers ipv4: Add ICMPv6 support when parse route ipproto MIPS: eBPF: Fix icache flush end address lan743x: Fix TX Stall Issue net: phy: phylink: fix uninitialized variable in phylink_get_mac_state net: aquantia: regression on cpus with high cores: set mode with 8 queues selftests: fixes for UDP GRO bpf: drop refcount if bpf_map_new_fd() fails in map_create() net: dsa: mv88e6xxx: power serdes on/off for 10G interfaces on 6390X net: dsa: mv88e6xxx: Fix u64 statistics xen-netback: don't populate the hash cache on XenBus disconnect xen-netback: fix occasional leak of grant ref mappings under memory pressure sctp: chunk.c: correct format string for size_t in printk net: netem: fix skb length BUG_ON in __skb_to_sgvec netlabel: fix out-of-bounds memory accesses ipv4: Pass original device to ip_rcv_finish_core ... -
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull more crypto fixes from Herbert Xu: "This fixes a couple of issues in arm64/chacha that was introduced in 5.0" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: arm64/chacha - fix hchacha_block_neon() for big endian crypto: arm64/chacha - fix chacha_4block_xor_neon() for big endian
-
Mao Wenan authored
If register_netdev() is failed to register sitn->fb_tunnel_dev, it will go to err_reg_dev and forget to free netdev(sitn->fb_tunnel_dev). BUG: memory leak unreferenced object 0xffff888378daad00 (size 512): comm "syz-executor.1", pid 4006, jiffies 4295121142 (age 16.115s) hex dump (first 32 bytes): 00 e6 ed c0 83 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d6dcb63e>] kvmalloc include/linux/mm.h:577 [inline] [<00000000d6dcb63e>] kvzalloc include/linux/mm.h:585 [inline] [<00000000d6dcb63e>] netif_alloc_netdev_queues net/core/dev.c:8380 [inline] [<00000000d6dcb63e>] alloc_netdev_mqs+0x600/0xcc0 net/core/dev.c:8970 [<00000000867e172f>] sit_init_net+0x295/0xa40 net/ipv6/sit.c:1848 [<00000000871019fa>] ops_init+0xad/0x3e0 net/core/net_namespace.c:129 [<00000000319507f6>] setup_net+0x2ba/0x690 net/core/net_namespace.c:314 [<0000000087db4f96>] copy_net_ns+0x1dc/0x330 net/core/net_namespace.c:437 [<0000000057efc651>] create_new_namespaces+0x382/0x730 kernel/nsproxy.c:107 [<00000000676f83de>] copy_namespaces+0x2ed/0x3d0 kernel/nsproxy.c:165 [<0000000030b74bac>] copy_process.part.27+0x231e/0x6db0 kernel/fork.c:1919 [<00000000fff78746>] copy_process kernel/fork.c:1713 [inline] [<00000000fff78746>] _do_fork+0x1bc/0xe90 kernel/fork.c:2224 [<000000001c2e0d1c>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290 [<00000000ec48bd44>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<0000000039acff8a>] 0xffffffffffffffff Signed-off-by:Mao Wenan <maowenan@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Despite what the datesheet says, the silicon implements the older way of snapshoting the statistics. Change the op. Reported-by: Chris.Healy@zii.aero Tested-by: Chris.Healy@zii.aero Fixes: 0ac64c39 ("net: dsa: mv88e6xxx: mv88e6161 uses mv88e6320 stats snapshot") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Jiri Benc authored
When IPv6 is compiled but disabled at runtime, geneve_sock_add returns -EAFNOSUPPORT. For metadata based tunnels, this causes failure of the whole operation of bringing up the tunnel. Ignore failure of IPv6 socket creation for metadata based tunnels caused by IPv6 not being available. This is the same fix as what commit d074bf96 ("vxlan: correctly handle ipv6.disable module parameter") is doing for vxlan. Note there's also commit c0a47e44 ("geneve: should not call rt6_lookup() when ipv6 was disabled") which fixes a similar issue but for regular tunnels, while this patch is needed for metadata based tunnels. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
