* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32:
  [AVR32] Add missing #include <linux/module.h>
  [AVR32] ssize_t should be long, not int
  [AVR32] Remove last remains of libgcc
  [AVR32] SPI platform code update
  [AVR32] Add PIOE device and reserve SDRAM pins
  [AVR32] Introduce at32_reserve_pin()
  [AVR32] Don't reset PIO state at bootup
  [AVR32] GPIO API implementation
  [AVR32] Use ARRAY_SIZE macro when appropriate
  [AVR32] Implement dma_mapping_error()
  [AVR32] Fix incorrect invalidation of shared cachelines
  [AVR32] ext int fixes
  [AVR32] fix serial port setup on ATSTK1000
  [AVR32] /proc/interrupts display
  Remove a couple final references to obsolete verify_area().

Remove find_trylock_page as per the removal schedule.
Signed-off-by: Nick Piggin <npiggin@suse.de>
[ Let's see if anybody screams ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (79 commits)
  [IPX]: Fix NULL pointer dereference on ipx unload
  [ATM]: atmarp.h needs to always include linux/types.h
  [NET]: Fix net/socket.c warnings.
  [NET]: cleanup sock_from_file()
  [NET]: change layout of ehash table
  [S390]: Add AF_IUCV socket support
  [S390]: Adapt special message interface to new IUCV API
  [S390]: Adapt netiucv driver to new IUCV API
  [S390]: Adapt vmlogrdr driver to new IUCV API
  [S390]: Adapt monreader driver to new IUCV API
  [S390]: Rewrite of the IUCV base code, part 2
  [S390]: Rewrite of the IUCV base code, part 1
  [X.25]: Adds /proc/net/x25/forward to view active forwarded calls.
  [X.25]: Adds /proc/sys/net/x25/x25_forward to control forwarding.
  [X.25]: Add call forwarding
  [XFRM]: xfrm_migrate() needs exporting to modules.
  [PFKEYV2]: CONFIG_NET_KEY_MIGRATE option
  [PFKEYV2]: Extension for dynamic update of endpoint address(es)
  [XFRM]: CONFIG_XFRM_MIGRATE option
  [XFRM]: User interface for handling XFRM_MSG_MIGRATE
  ...

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  MAINTAINERS: update DMFE and wireless drivers mailing list
  ucc_geth: Add support to local-mac-address property
  ucc_geth: Remove obsolete workaround of link speed change
  cxgb3: sysfs attributes in -mm tree
  Add Attansic L1 ethernet driver.

arch/avr32/kernel/cpu.c needs THIS_MODULE, so it must include
linux/module.h.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Since size_t is defined as unsigned long, ssize_t ought to be long
and not int. It could have been the other way around, but gcc defines
size_t as unsigned long, so this is correct.

This fixes a couple of printk format warnings.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Two libgcc headers were left around even though all the actual code
borrowed from libgcc is gone. Delete them.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Move stuff in spi.c into ATSTK1002 board code and update SPI
platform device definitions according to the new GPIO API.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

The PIOE device was left out before because it muxes SDRAM pins (and
is therefore a bit dangerous to mess with) and because no existing
drivers had any use for it.

It is needed for CompactFlash, however, and now that we have a way
to protect the SDRAM pins, it can be safely added.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

at32_reserve_pin() can be used for reserving portmux pins without
altering their configuration. Useful for e.g. SDRAM pins where we
really don't want to change the bootloader-provided configuration.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Leave the PIO lines as the bootloader left them. This allows us to
use PIOE without disturbing the SDRAM muxing.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Arch-neutral GPIO calls for AVR32. GPIO IRQ support written by
David Brownell.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

A patch to use ARRAY_SIZE macro already defined in linux/kernel.h
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

dma_map_single() never fails, so dma_mapping_error() simply returns 0.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Fix bug in dma_map_single(..., DMA_FROM_DEVICE) caused by incorrect
invalidation of shared cachelines at the beginning and/or end of
the specified buffer.  Those shared cachelines need to be flushed,
since they may hold valid data (which must not be discarded).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Bugfixes for external irq handler set_irq_type():

 - If set_irq_type() can't set the type, don't change anything!

 - It's not OK to change the flow handler as part of set_irq_type(),
   among other issues that violates spinlock rules.  Instead, we can
   call the relevant handler when we demux the external interrupts.

 - The external irq demux has no need to grab the spinlock.  And in
   fact grabbing it that way was wrong, since that code might be
   pre-empted by an irq at a different priority level, and that code
   might then have tried to grab that spinlock...
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

Fixes to USART setup on the stk-1000 ... don't configure USART 2, since
its TXD/RXD are used for INT-A and INT-B buttons; and configure USART 0
(for IRDA, and with corrected IRQ) iff SW2 has a non-default setting.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

The /proc/interrupts file should also display the irq_chip associated
with each irq ... e.g. INTC, EIM, GPIO.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

  Remove a couple final references to the obsolete verify_area() call,
which was long ago replaced by access_ok().
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

List netdev as the mailing list for DMFE (network driver)
instead of lkml.

List linux-wireless as the mailing list for wireless network drivers.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

IEEE-1275 defines “local-mac-address” to be a standard
property name to specify preassigned network address.
This patch adds support for it.
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

The workaround used a long delay of 4s which caused problem
when two link-changes happens at the same time.
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Wu Xiaochuan <xiao-chuan.wu@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

This patch fixes the usage of sysfs attributes in cxgb3 for the -mm tree.
It is built against the driver commited in the -mm tree.
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Fixes a null pointer dereference when unloading the ipx module.

On initialization of the ipx module, registering certain packet
types can fail. When this happens, unloading the module later
dereferences NULL pointers.  This patch fixes that. Please apply.
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

To provide the __be* types, even for userspace includes.

Reported by Andrew Walrond.
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:

	crypto/Kconfig

GCC (correctly) says:

net/socket.c: In function ‘sys_sendto’:
net/socket.c:1510: warning: ‘err’ may be used uninitialized in this function
net/socket.c: In function ‘sys_recvfrom’:
net/socket.c:1571: warning: ‘err’ may be used uninitialized in this function

sock_from_file() either returns filp->private_data or it
sets *err and returns NULL.

Callers return "err" on NULL, but filp->private_data could
be NULL.

Some minor rearrangements of error handling in sys_sendto
and sys_recvfrom solves the issue.
Signed-off-by: David S. Miller <davem@davemloft.net>

I believe dead code from sock_from_file() can be cleaned up.

All sockets are now built using sock_attach_fd(), that puts the 'sock' pointer 
into file->private_data and &socket_file_ops into file->f_op

I could not find a place where file->private_data could be set to NULL, 
keeping opened the file.

So to get 'sock' from a 'file' pointer, either :

- This is a socket file (f_op == &socket_file_ops), and we can directly get 
'sock' from private_data.
- This is not a socket, we return -ENOTSOCK and dont even try to find a socket 
via dentry/inode :)
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ehash table layout is currently this one :

First half of this table is used by sockets not in TIME_WAIT state
Second half of it is used by sockets in TIME_WAIT state.

This is non optimal because of for a given hash or socket, the two chain heads 
are located in separate cache lines.
Moreover the locks of the second half are never used.

If instead of this halving, we use two list heads in inet_ehash_bucket instead 
of only one, we probably can avoid one cache miss, and reduce ram usage, 
particularly if sizeof(rwlock_t) is big (various CONFIG_DEBUG_SPINLOCK, 
CONFIG_DEBUG_LOCK_ALLOC settings). So we still halves the table but we keep 
together related chains to speedup lookups and socket state change.

In this patch I did not try to align struct inet_ehash_bucket, but a future 
patch could try to make this structure have a convenient size (a power of two 
or a multiple of L1_CACHE_SIZE).
I guess rwlock will just vanish as soon as RCU is plugged into ehash :) , so 
maybe we dont need to scratch our heads to align the bucket...

Note : In case struct inet_ehash_bucket is not a power of two, we could 
probably change alloc_large_system_hash() (in case it use __get_free_pages()) 
to free the unused space. It currently allocates a big zone, but the last 
quarter of it could be freed. Again, this should be a temporary 'problem'.

Patch tested on ipv4 tcp only, but should be OK for IPV6 and DCCP.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

From: Jennifer Hunt <jenhunt@us.ibm.com>

This patch adds AF_IUCV socket support.
Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adapt special message interface to new IUCV API
Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adapt netiucv network device driver to new IUCV API
Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adapt vmlogrdr character device driver to new IUCV API
Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adapt monreader character device driver to new IUCV API
Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add rewritten IUCV base code to net/iucv.
Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the old IUCV code from drivers/s390/net
Remove approprirate IUCV entries from drivers/s390/net/Makefile,
drivers/s390/net/Kconfig and arch/s390/defconfig
Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

View the active forwarded calls
cat /proc/net/x25/forward
Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

echo "1" > /proc/sys/net/x25/x25_forward 
To turn on x25_forwarding, defaults to off
Requires the previous patch.
Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds call forwarding to X.25, allowing it to operate like an X.25 router.
Useful if one needs to manipulate X.25 traffic with tools like tc.
This is an update/cleanup based off a patch submitted by Daniel Ferenci a few years ago.

Thanks Alan for the feedback.
Added the null check to the clones.
Moved the skb_clone's into the forwarding functions.

Worked ok with Cisco XoT, linux X.25 back to back, and some old NTUs/PADs.
Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Needed by xfrm_user and af_key.
Signed-off-by: David S. Miller <davem@davemloft.net>