Fold it into the only caller.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When logging a new name, in case of a rename, we pin the log before
changing it. We then either delete a directory entry from the log or
insert a key range item to mark the old name for deletion on log replay.

However when doing one of those log changes we may have another task that
started writing out the log (at btrfs_sync_log()) and it started before
we pinned the log root. So we may end up changing a log tree while its
writeback is being started by another task syncing the log. This can lead
to inconsistencies in a log tree and other unexpected results during log
replay, because we can get some committed node pointing to a node/leaf
that ends up not getting written to disk before the next log commit.

The problem, conceptually, started to happen in commit 88d2beec
("btrfs: avoid logging all directory changes during renames"), because
there we started to update the log without joining its current transaction
first.

However the problem only became visible with commit 259c4b96
("btrfs: stop doing unnecessary log updates during a rename"), and that is
because we used to pin the log at btrfs_rename() and then before entering
btrfs_log_new_name(), when unlinking the old dentry, we ended up at
btrfs_del_inode_ref_in_log() and btrfs_del_dir_entries_in_log(). Both
of them join the current log transaction, effectively waiting for any log
transaction writeout (due to acquiring the root's log_mutex). This made it
safe even after leaving the current log transaction, because we remained
with the log pinned when we called btrfs_log_new_name().

Then in commit 259c4b96 ("btrfs: stop doing unnecessary log updates
during a rename"), we removed the log pinning from btrfs_rename() and
stopped calling btrfs_del_inode_ref_in_log() and
btrfs_del_dir_entries_in_log() during the rename, and started to do all
the needed work at btrfs_log_new_name(), but without joining the current
log transaction, only pinning the log, which is racy because another task
may have started writeout of the log tree right before we pinned the log.

Both commits landed in kernel 5.18, so it doesn't make any practical
difference which should be blamed, but I'm blaming the second commit only
because with the first one, by chance, the problem did not happen due to
the fact we joined the log transaction after pinning the log and unpinned
it only after calling btrfs_log_new_name().

So make btrfs_log_new_name() join the current log transaction instead of
pinning it, so that we never do log updates if it's writeout is starting.

Fixes: 259c4b96 ("btrfs: stop doing unnecessary log updates during a rename")
CC: stable@vger.kernel.org # 5.18+
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Tested-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

In btrfs_lookup_dentry releasing the reference of the sub_root and the
running orphan cleanup should only happen if the dentry found actually
represents a subvolume. This can only be true in the 'else' branch as
otherwise either fixup_tree_root_location returned an ENOENT error, in
which case sub_root wouldn't have been changed or if we got a different
errno this means btrfs_get_fs_root couldn't have executed successfully
again meaning sub_root will equal to root. So simplify all the branches
by moving the code into the 'else'.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

After the patch "btrfs: send: fix sending link commands for existing file
paths", we now have two infrastructures to detect and eliminate duplicated
inode references (due to names that got removed and re-added between the
send and parent snapshots):

1) One that works on a single inode ref/extref item;

2) A new one that works acrosss all ref/extref items for an inode, and
   it's also more efficient because even in the single ref/extref item
   case, it does not do a linear search for all the names encoded in the
   ref/extref item, it uses red black trees to speedup up the search.

There's no good reason to keep both infrastructures, we can use the new
one everywhere, and it's always more efficient.

So remove the old infrastructure and change all sites that are using it
to use the new one.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

There is a bug sending link commands for existing file paths. When we're
processing an inode, we go over all references. All the new file paths are
added to the "new_refs" list. And all the deleted file paths are added to
the "deleted_refs" list. In the end, when we finish processing the inode,
we iterate over all the items in the "new_refs" list and send link commands
for those file paths. After that, we go over all the items in the
"deleted_refs" list and send unlink commands for them. If there are
duplicated file paths in both lists, we will try to create them before we
remove them. Then the receiver gets an -EEXIST error when trying the link
operations.

Example for having duplicated file paths in both list:

  $ btrfs subvolume create vol

  # create a file and 2000 hard links to the same inode
  $ touch vol/foo
  $ for i in {1..2000}; do link vol/foo vol/$i ; done

  # take a snapshot for a parent snapshot
  $ btrfs subvolume snapshot -r vol snap1

  # remove 2000 hard links and re-create the last 1000 links
  $ for i in {1..2000}; do rm vol/$i; done;
  $ for i in {1001..2000}; do link vol/foo vol/$i; done

  # take another one for a send snapshot
  $ btrfs subvolume snapshot -r vol snap2

  $ mkdir receive_dir
  $ btrfs send snap2 -p snap1 | btrfs receive receive_dir/
  At subvol snap2
  link 1238 -> foo
  ERROR: link 1238 -> foo failed: File exists

In this case, we will have the same file paths added to both lists. In the
parent snapshot, reference paths {1..1237} are stored in inode references,
but reference paths {1238..2000} are stored in inode extended references.
In the send snapshot, all reference paths {1001..2000} are stored in inode
references. During the incremental send, we process their inode references
first. In record_changed_ref(), we iterate all its inode references in the
send/parent snapshot. For every inode reference, we also use find_iref() to
check whether the same file path also appears in the parent/send snapshot
or not. Inode references {1238..2000} which appear in the send snapshot but
not in the parent snapshot are added to the "new_refs" list. On the other
hand, Inode references {1..1000} which appear in the parent snapshot but
not in the send snapshot are added to the "deleted_refs" list. Next, when
we process their inode extended references, reference paths {1238..2000}
are added to the "deleted_refs" list because all of them only appear in the
parent snapshot. Now two lists contain items as below:
"new_refs" list: {1238..2000}
"deleted_refs" list: {1..1000}, {1238..2000}

Reference paths {1238..2000} appear in both lists. And as the processing
order mentioned about before, the receiver gets an -EEXIST error when trying
the link operations.

To fix the bug, the idea is to process the "deleted_refs" list before
the "new_refs" list. However, it's not easy to reshuffle the processing
order. For one reason, if we do so, we may unlink all the existing paths
first, there's no valid path anymore for links. And it's inefficient
because we do a bunch of unlinks followed by links for the same paths.
Moreover, it makes less sense to have duplications in both lists. A
reference path cannot not only be regarded as new but also has been seen in
the past, or we won't call it a new path. However, it's also not a good
idea to make find_iref() check a reference against all inode references
and all inode extended references because it may result in large disk
reads.

So we introduce two rbtrees to make the references easier for lookups.
And we also introduce record_new_ref_if_needed() and
record_deleted_ref_if_needed() for changed_ref() to check and remove
duplicated references early.
Reviewed-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Introduce wrappers to allocate and free recorded_ref structures.
Reviewed-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When the allocated position doesn't progress, we cannot submit IOs to
finish a block group, but there should be ongoing IOs that will finish a
block group. So, in that case, we wait for a zone to be finished and retry
the allocation after that.

Introduce a new flag BTRFS_FS_NEED_ZONE_FINISH for fs_info->flags to
indicate we need a zone finish to have proceeded. The flag is set when the
allocator detected it cannot activate a new block group. And, it is cleared
once a zone is finished.

CC: stable@vger.kernel.org # 5.16+
Fixes: afba2bc0 ("btrfs: zoned: implement active zone tracking")
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

cow_file_range() works in an all-or-nothing way: if it fails to allocate an
extent for a part of the given region, it gives up all the region including
the successfully allocated parts. On cow_file_range(), run_delalloc_zoned()
writes data for the region only when it successfully allocate all the
region.

This all-or-nothing allocation and write-out are problematic when available
space in all the block groups are get tight with the active zone
restriction. btrfs_reserve_extent() try hard to utilize the left space in
the active block groups and gives up finally and fails with
-ENOSPC. However, if we send IOs for the successfully allocated region, we
can finish a zone and can continue on the rest of the allocation on a newly
allocated block group.

This patch implements the partial write-out for run_delalloc_zoned(). With
this patch applied, cow_file_range() returns -EAGAIN to tell the caller to
do something to progress the further allocation, and tells the successfully
allocated region with done_offset. Furthermore, the zoned extent allocator
returns -EAGAIN to tell cow_file_range() going back to the caller side.

Actually, we still need to wait for an IO to complete to continue the
allocation. The next patch implements that part.

CC: stable@vger.kernel.org # 5.16+
Fixes: afba2bc0 ("btrfs: zoned: implement active zone tracking")
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

There are two places where allocating a chunk is not enough. These two
places are trying to ensure the space by allocating a chunk. To meet the
condition for active_total_bytes, we also need to activate a block group
there.

CC: stable@vger.kernel.org # 5.16+
Fixes: afba2bc0 ("btrfs: zoned: implement active zone tracking")
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

For metadata space on zoned filesystem, reaching ALLOC_CHUNK{,_FORCE}
means we don't have enough space left in the active_total_bytes. Before
allocating a new chunk, we can try to activate an existing block group
in this case.

Also, allocating a chunk is not enough to grant a ticket for metadata
space on zoned filesystem we need to activate the block group to
increase the active_total_bytes.

btrfs_zoned_activate_one_bg() implements the activation feature. It will
activate a block group by (maybe) finishing a block group. It will give up
activating a block group if it cannot finish any block group.

CC: stable@vger.kernel.org # 5.16+
Fixes: afba2bc0 ("btrfs: zoned: implement active zone tracking")
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The metadata overcommit makes the space reservation flexible but it is also
harmful to active zone tracking. Since we cannot finish a block group from
the metadata allocation context, we might not activate a new block group
and might not be able to actually write out the overcommit reservations.

So, disable metadata overcommit for zoned filesystems. We will ensure
the reservations are under active_total_bytes in the following patches.

CC: stable@vger.kernel.org # 5.16+
Fixes: afba2bc0 ("btrfs: zoned: implement active zone tracking")
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The active_total_bytes, like the total_bytes, accounts for the total bytes
of active block groups in the space_info.

With an introduction of active_total_bytes, we can check if the reserved
bytes can be written to the block groups without activating a new block
group. The check is necessary for metadata allocation on zoned
filesystem. We cannot finish a block group, which may require waiting
for the current transaction, from the metadata allocation context.
Instead, we need to ensure the ongoing allocation (reserved bytes) fits
in active block groups.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When we run out of active zones and no sufficient space is left in any
block groups, we need to finish one block group to make room to activate a
new block group.

However, we cannot do this for metadata block groups because we can cause a
deadlock by waiting for a running transaction commit. So, do that only for
a data block group.

Furthermore, the block group to be finished has two requirements. First,
the block group must not have reserved bytes left. Having reserved bytes
means we have an allocated region but did not yet send bios for it. If that
region is allocated by the thread calling btrfs_zone_finish(), it results
in a deadlock.

Second, the block group to be finished must not be a SYSTEM block
group. Finishing a SYSTEM block group easily breaks further chunk
allocation by nullifying the SYSTEM free space.

In a certain case, we cannot find any zone finish candidate or
btrfs_zone_finish() may fail. In that case, we fall back to split the
allocation bytes and fill the last spaces left in the block groups.

CC: stable@vger.kernel.org # 5.16+
Fixes: afba2bc0 ("btrfs: zoned: implement active zone tracking")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

For the later patch, convert the return type from bool to int and return
errors. No functional changes.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Use fs_info->max_extent_size also in get_extent_max_capacity() for the
completeness. This is only used for defrag and not really necessary to fix
the metadata reservation size. But, it still suppresses unnecessary defrag
operations.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

If count_max_extents() uses BTRFS_MAX_EXTENT_SIZE to calculate the number
of extents needed, btrfs release the metadata reservation too much on its
way to write out the data.

Now that BTRFS_MAX_EXTENT_SIZE is replaced with fs_info->max_extent_size,
convert count_max_extents() to use it instead, and fix the calculation of
the metadata reservation.

CC: stable@vger.kernel.org # 5.12+
Fixes: d8e3fb10 ("btrfs: zoned: use ZONE_APPEND write for zoned mode")
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

On zoned filesystem, data write out is limited by max_zone_append_size,
and a large ordered extent is split according the size of a bio. OTOH,
the number of extents to be written is calculated using
BTRFS_MAX_EXTENT_SIZE, and that estimated number is used to reserve the
metadata bytes to update and/or create the metadata items.

The metadata reservation is done at e.g, btrfs_buffered_write() and then
released according to the estimation changes. Thus, if the number of extent
increases massively, the reserved metadata can run out.

The increase of the number of extents easily occurs on zoned filesystem
if BTRFS_MAX_EXTENT_SIZE > max_zone_append_size. And, it causes the
following warning on a small RAM environment with disabling metadata
over-commit (in the following patch).

[75721.498492] ------------[ cut here ]------------
[75721.505624] BTRFS: block rsv 1 returned -28
[75721.512230] WARNING: CPU: 24 PID: 2327559 at fs/btrfs/block-rsv.c:537 btrfs_use_block_rsv+0x560/0x760 [btrfs]
[75721.581854] CPU: 24 PID: 2327559 Comm: kworker/u64:10 Kdump: loaded Tainted: G        W         5.18.0-rc2-BTRFS-ZNS+ #109
[75721.597200] Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.0 02/22/2021
[75721.607310] Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
[75721.616209] RIP: 0010:btrfs_use_block_rsv+0x560/0x760 [btrfs]
[75721.646649] RSP: 0018:ffffc9000fbdf3e0 EFLAGS: 00010286
[75721.654126] RAX: 0000000000000000 RBX: 0000000000004000 RCX: 0000000000000000
[75721.663524] RDX: 0000000000000004 RSI: 0000000000000008 RDI: fffff52001f7be6e
[75721.672921] RBP: ffffc9000fbdf420 R08: 0000000000000001 R09: ffff889f8d1fc6c7
[75721.682493] R10: ffffed13f1a3f8d8 R11: 0000000000000001 R12: ffff88980a3c0e28
[75721.692284] R13: ffff889b66590000 R14: ffff88980a3c0e40 R15: ffff88980a3c0e8a
[75721.701878] FS:  0000000000000000(0000) GS:ffff889f8d000000(0000) knlGS:0000000000000000
[75721.712601] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[75721.720726] CR2: 000055d12e05c018 CR3: 0000800193594000 CR4: 0000000000350ee0
[75721.730499] Call Trace:
[75721.735166]  <TASK>
[75721.739886]  btrfs_alloc_tree_block+0x1e1/0x1100 [btrfs]
[75721.747545]  ? btrfs_alloc_logged_file_extent+0x550/0x550 [btrfs]
[75721.756145]  ? btrfs_get_32+0xea/0x2d0 [btrfs]
[75721.762852]  ? btrfs_get_32+0xea/0x2d0 [btrfs]
[75721.769520]  ? push_leaf_left+0x420/0x620 [btrfs]
[75721.776431]  ? memcpy+0x4e/0x60
[75721.781931]  split_leaf+0x433/0x12d0 [btrfs]
[75721.788392]  ? btrfs_get_token_32+0x580/0x580 [btrfs]
[75721.795636]  ? push_for_double_split.isra.0+0x420/0x420 [btrfs]
[75721.803759]  ? leaf_space_used+0x15d/0x1a0 [btrfs]
[75721.811156]  btrfs_search_slot+0x1bc3/0x2790 [btrfs]
[75721.818300]  ? lock_downgrade+0x7c0/0x7c0
[75721.824411]  ? free_extent_buffer.part.0+0x107/0x200 [btrfs]
[75721.832456]  ? split_leaf+0x12d0/0x12d0 [btrfs]
[75721.839149]  ? free_extent_buffer.part.0+0x14f/0x200 [btrfs]
[75721.846945]  ? free_extent_buffer+0x13/0x20 [btrfs]
[75721.853960]  ? btrfs_release_path+0x4b/0x190 [btrfs]
[75721.861429]  btrfs_csum_file_blocks+0x85c/0x1500 [btrfs]
[75721.869313]  ? rcu_read_lock_sched_held+0x16/0x80
[75721.876085]  ? lock_release+0x552/0xf80
[75721.881957]  ? btrfs_del_csums+0x8c0/0x8c0 [btrfs]
[75721.888886]  ? __kasan_check_write+0x14/0x20
[75721.895152]  ? do_raw_read_unlock+0x44/0x80
[75721.901323]  ? _raw_write_lock_irq+0x60/0x80
[75721.907983]  ? btrfs_global_root+0xb9/0xe0 [btrfs]
[75721.915166]  ? btrfs_csum_root+0x12b/0x180 [btrfs]
[75721.921918]  ? btrfs_get_global_root+0x820/0x820 [btrfs]
[75721.929166]  ? _raw_write_unlock+0x23/0x40
[75721.935116]  ? unpin_extent_cache+0x1e3/0x390 [btrfs]
[75721.942041]  btrfs_finish_ordered_io.isra.0+0xa0c/0x1dc0 [btrfs]
[75721.949906]  ? try_to_wake_up+0x30/0x14a0
[75721.955700]  ? btrfs_unlink_subvol+0xda0/0xda0 [btrfs]
[75721.962661]  ? rcu_read_lock_sched_held+0x16/0x80
[75721.969111]  ? lock_acquire+0x41b/0x4c0
[75721.974982]  finish_ordered_fn+0x15/0x20 [btrfs]
[75721.981639]  btrfs_work_helper+0x1af/0xa80 [btrfs]
[75721.988184]  ? _raw_spin_unlock_irq+0x28/0x50
[75721.994643]  process_one_work+0x815/0x1460
[75722.000444]  ? pwq_dec_nr_in_flight+0x250/0x250
[75722.006643]  ? do_raw_spin_trylock+0xbb/0x190
[75722.013086]  worker_thread+0x59a/0xeb0
[75722.018511]  kthread+0x2ac/0x360
[75722.023428]  ? process_one_work+0x1460/0x1460
[75722.029431]  ? kthread_complete_and_exit+0x30/0x30
[75722.036044]  ret_from_fork+0x22/0x30
[75722.041255]  </TASK>
[75722.045047] irq event stamp: 0
[75722.049703] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[75722.057610] hardirqs last disabled at (0): [<ffffffff8118a94a>] copy_process+0x1c1a/0x66b0
[75722.067533] softirqs last  enabled at (0): [<ffffffff8118a989>] copy_process+0x1c59/0x66b0
[75722.077423] softirqs last disabled at (0): [<0000000000000000>] 0x0
[75722.085335] ---[ end trace 0000000000000000 ]---

To fix the estimation, we need to introduce fs_info->max_extent_size to
replace BTRFS_MAX_EXTENT_SIZE, which allow setting the different size for
regular vs zoned filesystem.

Set fs_info->max_extent_size to BTRFS_MAX_EXTENT_SIZE by default. On zoned
filesystem, it is set to fs_info->max_zone_append_size.

CC: stable@vger.kernel.org # 5.12+
Fixes: d8e3fb10 ("btrfs: zoned: use ZONE_APPEND write for zoned mode")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This patch is basically a revert of commit 5a80d1c6 ("btrfs: zoned:
remove max_zone_append_size logic"), but without unnecessary ASSERT and
check. The max_zone_append_size will be used as a hint to estimate the
number of extents to cover delalloc/writeback region in the later commits.

The size of a ZONE APPEND bio is also limited by queue_max_segments(), so
this commit considers it to calculate max_zone_append_size. Technically, a
bio can be larger than queue_max_segments() * PAGE_SIZE if the pages are
contiguous. But, it is safe to consider "queue_max_segments() * PAGE_SIZE"
as an upper limit of an extent size to calculate the number of extents
needed to write data.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Add bdev_max_segments() like other queue parameters.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Currently btrfs_ino() tries to use first the objectid of the inode's
location key. This is to avoid truncation of the inode number on 32 bits
platforms because the i_ino field of struct inode has the unsigned long
type, while the objectid is a 64 bits unsigned type (u64) on every system.
This logic was added in commit 33345d01 ("Btrfs: Always use 64bit
inode number").

However if we are running on a 64 bits system, we can always directly
return the i_ino value from struct inode, which eliminates the need for
he special if statement that tests for a location key type of
BTRFS_ROOT_ITEM_KEY - in which case i_ino may not have the same value as
the objectid in the inode's location objectid, it may have a value of
BTRFS_EMPTY_SUBVOL_DIR_OBJECTID, for the case of snapshots of trees with
subvolumes/snapshots inside them.

So add a special version for 64 bits system that directly returns i_ino
of struct inode. This eliminates one branch and reduces the overall code
size, since btrfs_ino() is an inline function that is extensively used.

Before:

$ size fs/btrfs/btrfs.ko
   text	   data	    bss	    dec	    hex	filename
1617487	 189240	  29032	1835759	 1c02ef	fs/btrfs/btrfs.ko

After:

$ size fs/btrfs/btrfs.ko
   text	   data	    bss	    dec	    hex	filename
1612028	 189180	  29032	1830240	 1bed60	fs/btrfs/btrfs.ko
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

We currently don't use the location key of the btree inode, its content
is set to zeroes, as it's a special inode that is not persisted (it has
no inode item stored in any btree).

At btrfs_ino(), an inline function used extensively in btrfs, we have
this special check if the given inode's location objectid is 0, and if it
is, we return the value stored in the VFS' inode i_ino field instead
(which is BTRFS_BTREE_INODE_OBJECTID for the btree inode).

To reduce the code at btrfs_ino(), we can simply set the objectid of the
btree inode to the value BTRFS_BTREE_INODE_OBJECTID. This eliminates the
need to check for the special case of the objectid being zero, with the
side effect of reducing the overall code size and having less code to
execute, as btrfs_ino() is an inline function.

Before:

$ size fs/btrfs/btrfs.ko
   text	   data	    bss	    dec	    hex	filename
1620502	 189240	  29032	1838774	 1c0eb6	fs/btrfs/btrfs.ko

After:

$ size fs/btrfs/btrfs.ko
   text	   data	    bss	    dec	    hex	filename
1617487	 189240	  29032	1835759	 1c02ef	fs/btrfs/btrfs.ko
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

kmap_atomic() is being deprecated in favor of kmap_local_page() where it
is feasible. With kmap_local_page() mappings are per thread, CPU local,
and not globally visible.

The last use of kmap_atomic is in inode.c where the context is atomic [1]
and can be safely replaced by kmap_local_page.

Tested with xfstests on a QEMU + KVM 32-bits VM with 4GB RAM and booting a
kernel with HIGHMEM64GB enabled.

[1] https://lore.kernel.org/linux-btrfs/20220601132545.GM20633@twin.jikos.cz/Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The use of kmap() is being deprecated in favor of kmap_local_page(). With
kmap_local_page(), the mapping is per thread, CPU local and not globally
visible.

Therefore, use kmap_local_page() / kunmap_local() in zlib_decompress_bio()
because in this function the mappings are per thread and are not visible
in other contexts.

Tested with xfstests on QEMU + KVM 32-bits VM with 4GB of RAM and
HIGHMEM64G enabled. This patch passes 26/26 tests of group "compress".
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The use of kmap() is being deprecated in favor of kmap_local_page(). With
kmap_local_page(), the mapping is per thread, CPU local and not globally
visible.

Therefore, use kmap_local_page() / kunmap_local() in zlib_compress_pages()
because in this function the mappings are per thread and are not visible
in other contexts. Furthermore, drop the mappings of "out_page" which is
allocated within zlib_compress_pages() with alloc_page(GFP_NOFS) and use
page_address().

Tested with xfstests on a QEMU + KVM 32-bits VM with 4GB of RAM booting
a kernel with HIGHMEM64G enabled. This patch passes 26/26 tests of group
"compress".

CC: Qu Wenruo <wqu@suse.com>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The use of kmap() is being deprecated in favor of kmap_local_page(). With
kmap_local_page(), the mapping is per thread, CPU local and not globally
visible.

Therefore, use kmap_local_page() / kunmap_local() in zstd.c because in this
file the mappings are per thread and are not visible in other contexts. In
the meanwhile use plain page_address() on output pages allocated with
the GFP_NOFS flag instead of calling kmap*() on them (since they are
always allocated from ZONE_NORMAL).

Tested with xfstests on QEMU + KVM 32 bits VM with 4GB of RAM, booting a
kernel with HIGHMEM64G enabled.
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

__kunmap_ {local,atomic}() currently take pointers to void. However, this
is semantically incorrect, since these functions do not change the memory
their arguments point to.

Therefore, make this semantics explicit by modifying the
__kunmap_{local,atomic}() prototypes to take pointers to const void.

As a side effect, compilers may produce more efficient code.
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Helge Deller <deller@gmx.de>  # parisc
Suggested-by: David Sterba <dsterba@suse.cz>
Suggested-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Currently, for a direct IO write, if we need to fallback to buffered IO,
either to satisfy the whole write operation or just a part of it, we do
it in the current context even if it's a NOWAIT context. This is not ideal
because we currently don't have support for NOWAIT semantics in the
buffered IO path (we can block for several reasons), so we should instead
return -EAGAIN to the caller, so that it knows it should retry (the whole
operation or what's left of it) in a context where blocking is acceptable.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The number of block group reserve types BTRFS_BLOCK_RSV_* is small and
fits to u8 and there's enough left in case we want to add more.
For type safety use the enum but make it 8 bits in the structure to save
space.

The structure size is now 48 on release build, making a slight
improvement in structures where it's embedded, like btrfs_fs_info or
btrfs_inode.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Use simple bool type for the block reserve failfast status, there's
short to save space as there used to be int but there's no reason for
that.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Use simple bool type for the block reserve full status, there's short to
save space as there used to be int but there's no reason for that.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Always consume the bio and call the end_io handler on error instead of
returning an error and letting the caller handle it.  This matches what
the block layer submission and the other btrfs bio submission handlers do
and avoids any confusion on who needs to handle errors.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs_wq_submit_bio is used for writeback under memory pressure.
Instead of failing the I/O when we can't allocate the async_submit_bio,
just punt back to the synchronous submission path.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs_submit_data_write_bio special cases the reloc root because the
checksums are preloaded, but only does so for the !sync case.  The sync
case can't happen for data relocation, but just handling it more generally
significantly simplifies the logic.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>

Transfer the bio counter reference acquired by btrfs_submit_bio to
raid56_parity_write and raid56_parity_recovery together with the bio
that the reference was acquired for instead of acquiring another
reference in those helpers and dropping the original one in
btrfs_submit_bio.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>

Always consume the bio and call the end_io handler on error instead of
returning an error and letting the caller handle it.  This matches what
the block layer submission does and avoids any confusion on who
needs to handle errors.

Also use the proper bool type for the generic_io argument.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>

Always consume the bio and call the end_io handler on error instead of
returning an error and letting the caller handle it.  This matches what
the block layer submission does and avoids any confusion on who
needs to handle errors.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>

Always consume the bio and call the end_io handler on error instead of
returning an error and letting the caller handle it.  This matches
what the block layer submission does and avoids any confusion on who
needs to handle errors.

As this requires touching all the callers, rename the function to
btrfs_submit_bio, which describes the functionality much better.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>

For profiles other than RAID56, __btrfs_map_block() returns @map_length
as min(stripe_end, logical + *length), which is also the same result
from btrfs_get_io_geometry().

But for RAID56, __btrfs_map_block() returns @map_length as stripe_len.

This strange behavior is going to hurt incoming bio split at
btrfs_map_bio() time, as we will use @map_length as bio split size.

Fix this behavior by returning @map_length by the same calculation as
for other profiles.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>

The raid56 code assumes a fixed stripe length BTRFS_STRIPE_LEN but there
are functions passing it as arguments, this is not necessary. The fixed
value has been used for a long time and though the stripe length should
be configurable by super block member stripesize, this hasn't been
implemented and would require more changes so we don't need to keep this
code around until then.

Partially based on a patch from Qu Wenruo.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[ update changelog ]
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

The inode cache feature was removed in kernel 5.11, and we no longer have
any code that reads from or writes to inode caches. We may still mount a
filesystem that has inode caches, but they are ignored.

Remove the check for an inode cache from btrfs_is_free_space_inode(),
since we no longer have code to trigger reads from an inode cache or
writes to an inode cache. The check at send.c is still needed, because
in case we find a filesystem with an inode cache, we must ignore it.
Also leave the checks at tree-checker.c, as they are sanity checks.

This eliminates a dead branch and reduces the amount of code since it's
in an inline function.

Before:

$ size fs/btrfs/btrfs.ko
   text	   data	    bss	    dec	    hex	filename
1620662	 189240	  29032	1838934	 1c0f56	fs/btrfs/btrfs.ko

After:

$ size fs/btrfs/btrfs.ko
   text	   data	    bss	    dec	    hex	filename
1620502	 189240	  29032	1838774	 1c0eb6	fs/btrfs/btrfs.ko
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>