- 09 Nov, 2005 40 commits
-
-
Manu Abraham authored
We need to protect the read/write commands with a mutex. Bug reported by Henrik Sjoberg <henke@epact.se> Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Michael Krufky authored
- Updated documentation for FusionHDTV Lite cards. We must differentiate the bt8xx based "Lite" cards from the cx2388x based "Gold" cards. - Provide location of CARDLIST.bttv Documentation, rather than instructing users to look at bttv.h - Include card decimal id numbers. These are valid for module arguments, and might be easier for some people to remember, rather than hex. Signed-off-by:
Michael Krufky <mkrufky@m1k.net> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
-
Manu Abraham authored
Updated Documentation Signed-off-by:
-
Michael Krufky authored
Added support for Air2PC/AirStar 2 ATSC 3rd generation (HD5000) Signed-off-by:
Taylor Jacob <rtjacob@earthlink.net> Signed-off-by:
-
Andrew de Quincey authored
Remove DEBUG_LOCKLOSS stuff - as the problem has been found and resolved Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
-
Andrew de Quincy authored
Remove broken stv0299 enhanced tuning code Signed-off-by:
-
NooneImportant authored
Add support to FE_DISHNETWORK_SEND_LEGACY_CMD code to support other frontends besides stv0299. The generic code is a fallback in the case that it doesn't work for some specific frontends (again stv0299 being a good example). Signed-off-by:
NooneImportant <nxhxzi702@sneakemail.com> Signed-off-by:
Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
-
Johannes Stezenbach authored
Fix integer overflow bug in read_signal_strength() reported by Anthony Leclerc. Signed-off-by:
-
Manu Abraham authored
Fixes a possible buffer overflow due to reading more than 8 bytes into an 8 byte long array Thanks to Perceval Anichini <perceval.anichini@streamvision.fr> for pointing out the bug. Signed-off-by:
-
Perceval Anichini authored
removes the redundant checksum calculation, which was also exported from the dst.c module Signed-off-by:
Perceval Anichini <perceval.anichini@streamvision.fr> Signed-off-by:
-
Tom Hughes authored
fix DST DVB-S get_frequency - fixes a bug that caused the returned frequency to wrong Signed-off-by:
Tom Hughes <tom@compton.nu> Signed-off-by:
-
Manu Abraham authored
fixes broken support for vp-3040 TS204 Thanks-to: Lee Hammerton <savoury.snax@bulldoghome.com> Signed-off-by:
-
Perceval Anichini authored
fix memory leaks Signed-off-by:
-
Peter Hagervall authored
Sparse warnings - remove address space related warnings Signed-off-by:
Peter Hagervall <hager@cs.umu.se> Signed-off-by:
-
Raymond Mantchala authored
ASN.1 length field Fix Signed-off-by:
Raymond Mantchala <raymond.mantchala@streamvision.ft> Signed-off-by:
-
Michael Krufky authored
Fix charge pump setting in microtune_mt7202dtf_pll_set(). Thanks to Jyrki Niskala for reporting. Signed-off-by:
-
Thorsten Maerz authored
The duplicate key definitions cause misinterpretations with other keys, e.g. the "TELETEXT" key clashes with "CHANNEL_UP" and thus can not be used with LIRC. This patch removes these duplicates. Signed-off-by:
Thorsten Maerz <torte@netztorte.de> Signed-off-by:
-
Andreas Oberritter authored
Removed unavoidable error message and related code. Signed-off-by:
Andreas Oberritter <obi@linuxtv.org> Signed-off-by:
-
Hartmut Hackmann authored
- leave I2C bridge open at pll_sleep to support Philips EUROPA based cards. - give an error message if the communication with the pll fails. Signed-off-by:
Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by:
-
Michael Krufky authored
Added ATSC support for DViCO FusionHDTV5 Lite. Signed-off-by:
-
Andrew de Quincey authored
Remove my badly thought out patch. This does need done, but in a proper way. Signed-off-by:
-
Martin Zwickel authored
This patch adds support for the Technotrend Budget Card S1500 with a BSBE1 frontend and the LNBP21. Signed-off-by:
Martin Zwickel <martin.zwickel@technotrend.de> Signed-off-by:
-
Manu Abraham authored
- Identify Tuner, Daughterboards correctly - Added partial support for VP-10320A (DVB-S), VP-20210 (DVB-C), VP-3040 (DVB-T) Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
Christoph Hellwig <hch@lst.de> Cc: Andi Kleen <ak@muc.de> Signed-off-by:
-
Christoph Hellwig authored
Some architectures define and use this type in their compat_ioctl code, but all of them can easily use the identical ioctl_trans_handler_t type that is defined in common code. Signed-off-by:
-
Christoph Hellwig authored
We don't implement these ioctls, but some architectures define them in the headers. Bash picks them up and issues them frequently. Add compat_ioctl handlers to silence warnings about unhandled copat ioctls. Signed-off-by:
-
Christoph Hellwig authored
->permission and ->lookup have a struct nameidata * argument these days to pass down lookup intents. Unfortunately some callers of lookup_hash don't actually pass this one down. For lookup_one_len() we don't have a struct nameidata to pass down, but as this function is a library function only used by filesystem code this is an acceptable limitation. All other callers should pass down the nameidata, so this patch changes the lookup_hash interface to only take a struct nameidata argument and derives the other two arguments to __lookup_hash from it. All callers already have the nameidata argument available so this is not a problem. At the same time I'd like to deprecate the lookup_hash interface as there are better exported interfaces for filesystem usage. Before it can actually be removed I need to fix up rpc_pipefs. Signed-off-by:
-
Christoph Hellwig authored
A few more callers of permission() just want to check for a different access pattern on an already open file. This patch adds a wrapper for permission() that takes a file in preparation of per-mount read-only support and to clean up the callers a little. The helper is not intended for new code, everything without the interface set in stone should use vfs_permission() Signed-off-by:
-
Christoph Hellwig authored
Most permission() calls have a struct nameidata * available. This helper takes that as an argument and thus makes sure we pass it down for lookup intents and prepares for per-mount read-only support where we need a struct vfsmount for checking whether a file is writeable. Signed-off-by:
-
Gabriel A. Devenyi authored
Found this on Coverty's linux bug database (http://linuxbugsdb.coverity.com). The function pkt_iosched_process_queue makes a call to bdev_get_queue and stores the result but never uses it, so it looks like it can be safely removed. Signed-off-by:
Gabriel A. Devenyi <ace@staticwave.ca> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
Peter Osterlund <petero2@telia.com> Signed-off-by:
-
Adrian Bunk authored
This patch removes an ancient changelog file. Signed-off-by:
-
Adrian Bunk authored
The CONFIG_EXT{2,3}_CHECK options where were never available, and all they did was to implement a subset of e2fsck in the kernel. Signed-off-by: -
Jan Kara authored
Make reiserfs correctly return EDQUOT when the allocation failed due to quotas (so far we just returned ENOSPC). Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Christoph Hellwig authored
Pass down the silent flag to parse_options(). Without this fat gives warnings when mounting some non-fat rootfs with options. Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Christoph Hellwig authored
Remove mtime update in hpfs_file_write, it's done in generic_file_write already. Signed-off-by:
-
Olaf Hering authored
This patch removes almost all inclusions of linux/version.h. The 3 #defines are unused in most of the touched files. A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is unfortunatly in linux/version.h. There are also lots of #ifdef for long obsolete kernels, this was not touched. In a few places, the linux/version.h include was move to where the LINUX_VERSION_CODE was used. quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'` search pattern: /UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h Signed-off-by:
Olaf Hering <olh@suse.de> Signed-off-by:
-
Roman Zippel authored
Add some more checks during the parsing of .config, so that after parsing sym_change_count reflects the correct state whether the .config is correct and in sync with the Kconfig or if it needs saving. Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Roman Zippel authored
Add a few error tokens to the parser to catch common errors and print more descriptive error messages. Signed-off-by:
-
Roman Zippel authored
This simplifies the parser a bit by merging the various symbol types into a single token and adds the type to the keyword hash. Signed-off-by:
-
Roman Zippel authored
Use gperf to generate a hash for the kconfig keywords. This greatly reduces the size of the generated scanner and makes it easier to extend kconfig. Signed-off-by:
-
