- 06 Jun, 2013 1 commit
-
-
Ferruh Yigit authored
memcpy param is wrong because of offset in bl_cmd, this may corrupt the stack which may cause a crash. Tested-by: Ferruh Yigit <fery@cypress.com> on TMA300-DVK Signed-off-by:
Ferruh Yigit <fery@cypress.com> Acked-by:
Javier Martinez Canillas <javier@dowhile0.org> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 04 Jun, 2013 2 commits
-
-
Ping Cheng authored
And make the lines easier to read. Signed-off-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Eric Miao authored
In summary, the symptom is intermittent key events lost after resume on some machines with synaptics touchpad (seems this is synaptics _only_), and key events loss is due to serio port reconnect after psmouse sync lost. Removing psmouse and inserting it back during the suspend/resume process is able to work around the issue, so the difference between psmouse_connect() and psmouse_reconnect() is the key to the root cause of this problem. After comparing the two different paths, synaptics driver has its own implementation of synaptics_reconnect(), and the missing psmouse_probe() seems significant, the patch below added psmouse_probe() to the reconnect process, and has been verified many times that the issue could not be reliably reproduced. There are two PS/2 commands in psmouse_probe(): 1. PSMOUSE_CMD_GETID 2. PSMOUSE_CMD_RESET_DIS Only the PSMOUSE_CMD_GETID seems to be significant. The PSMOUSE_CMD_RESET_DIS is irrelevant to this issue after trying several times. So we have only implemented this patch to issue the PSMOUSE_CMD_GETID so far. Tested-by:
Daniel Manrique <daniel.manrique@canonical.com> Signed-off-by:
James M Leddy <james.leddy@canonical.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 23 May, 2013 1 commit
-
-
Ping Cheng authored
plus send begin and end of express keys events for Cintiq 13HD and DTH2242/DTK2241 Signed-off-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 06 May, 2013 3 commits
-
-
Ping Cheng authored
Add new styli for Cintiq 13HD and 22HD. Update comments for for tools. Check whole 10 nibbles of tool ID for tool types. Remove unuecessary tool type for Intuos series PAD. Signed-off-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Ping Cheng authored
Cintiq 13HD, DTK 2241, and Cintiq 22HDT are supported. Signed-off-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Heiko Abraham authored
The egalax_ts touchscreen modul not report ABS_MT_POSITION_Y proper. As result it may be, that upper software levels only receive x coordinates well. Signed-off-by:
Heiko Abraham <abrahamh@web.de> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 01 May, 2013 1 commit
-
-
Dmitry Torokhov authored
Prepare first set of updates for 3.10 merge window.
-
- 19 Apr, 2013 3 commits
-
-
Shawn Nematbakhsh authored
The trackpoint driver sets various parameter default values, all of which happen to be power-on defaults (Source: IBM TrackPoint Engineering Specification, Version 4.0. Also confirmed by empirical data). By sending the power-on reset command to reset all parameters to power-on state, we can skip the lengthy process of programming all parameters. In testing, ~2.5 secs of time writing parameters was reduced to .35 seconds waiting for power-on reset to complete. Signed-off-by:
Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Ping Cheng authored
Same as Cintiq 24HDT, DTH2242 has two interfaces sharing one configuration. This patch ignores the second interface. Signed-off-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Ping Cheng authored
Signed-off-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 15 Apr, 2013 6 commits
-
-
Sachin Kamat authored
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
This form is more concise. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Bastian Hecht authored
We no longer need to set up the reset pin for the st1232 in the board code, but can pass the GPIO number via the platform data to the driver. This results in a cleaner grouping of the device setup. Signed-off-by:
Bastian Hecht <hechtb+renesas@gmail.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Bastian Hecht authored
We add the possibility to hand over a GPIO number for the reset pin. This way we can remove existing board code that takes care of it and group this information properly in the platform data or in the device tree configuration. Signed-off-by:
Bastian Hecht <hechtb+renesas@gmail.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Laurent Pinchart authored
Use the devm_* managed functions to allocate resources. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jason Gerecke authored
Reported-by:
Przemo Firszt <przemo@firszt.eu> Signed-off-by:
Jason Gerecke <killertofu@gmail.com> Tested-by:
Przemo Firszt <przemo@firszt.eu> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 08 Apr, 2013 5 commits
-
-
Jason Gerecke authored
The MFT device in the Cintiq 24HDT has two interfaces sharing the same configuration. Without this patch, the driver attempts to make use of both interfaces, even though the second interface is not compatible with this driver. Signed-off-by:
Jason Gerecke <killertofu@gmail.com> Tested-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Henrik Rydberg authored
Most semi-mt drivers use the slots in a manual way, but really only need to treat the finger count manually. With this patch, a semi-mt driver may use the input-mt core for everything else. Signed-off-by:
Henrik Rydberg <rydberg@euromail.se> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 02 Apr, 2013 2 commits
-
-
Dmitry Torokhov authored
Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Mathieu J. Poirier authored
Some devices have too few buttons, which it makes it hard to have a reset combo that won't trigger automatically. As such a timeout functionality that requires the combination to be held for a given amount of time before triggering is introduced. If a key combo is recognized and held for a 'timeout' amount of time, the system triggers a reset. If the timeout value is omitted the driver simply ignores the functionality. Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 31 Mar, 2013 6 commits
-
-
Laxman Dewangan authored
NVIDIA's Tegra20 and Tegra30 supports the 16x8 keyboard matrix and T114 support the 11x8 Key matrix. Add support for defining the maximum row/columns based on SoC through proper compatibility. Signed-off-by:
Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Fabio Estevam authored
Using devm_ functions can make the code cleaner and simpler. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Mischa Jonker authored
Add match table for device tree binding and dts binding doc. Signed-off-by:
Mischa Jonker <mjonker@synopsys.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sebastien Royen authored
Event value is wrong. Should be in range -2048 to 2047, but is in range 0 to 4095. Use s8 to int conversion and remove 0xfff mask. Signed-off-by:
Sebastien Royen <sebastien.royen@armadeus.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
'pdata' is already dereferenced earlier. Hence this check is meaningless. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
kfree on a null pointer is a no-op. Hence null check is not necessary. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 27 Mar, 2013 2 commits
-
-
Jingoo Han authored
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/input/misc/ad714x-i2c.c:17:12: warning: 'ad714x_i2c_suspend' defined but not used [-Wunused-function] drivers/input/misc/ad714x-i2c.c:22:12: warning: 'ad714x_i2c_resume' defined but not used [-Wunused-function] drivers/input/misc/ad714x-spi.c:20:12: warning: 'ad714x_spi_suspend' defined but not used [-Wunused-function] drivers/input/misc/ad714x-spi.c:25:12: warning: 'ad714x_spi_resume' defined but not used [-Wunused-function] Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jingoo Han authored
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/input/misc/adxl34x-spi.c:98:12: warning: 'adxl34x_spi_suspend' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-spi.c:108:12: warning: 'adxl34x_spi_resume' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-i2c.c:109:12: warning: 'adxl34x_i2c_suspend' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-i2c.c:119:12: warning: 'adxl34x_i2c_resume' defined but not used [-Wunused-function] Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 18 Mar, 2013 8 commits
-
-
Fabio Porcedda authored
This patch converts the drivers to use the module_platform_driver_probe() macro which makes the code smaller and a bit simpler. Signed-off-by:
Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sachin Kamat authored
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-