We can use the radixtree index of the obj->pages to find the start
position of the desired partial range.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-11-chris@chris-wilson.co.uk

A while ago we switched from a contiguous array of pages into an sglist,
for that was both more convenient for mapping to hardware and avoided
the requirement for a vmalloc array of pages on every object. However,
certain GEM API calls (like pwrite, pread as well as performing
relocations) do desire access to individual struct pages. A quick hack
was to introduce a cache of the last access such that finding the
following page was quick - this works so long as the caller desired
sequential access. Walking backwards, or multiple callers, still hits a
slow linear search for each page. One solution is to store each
successful lookup in a radix tree.

v2: Rewrite building the radixtree for clarity, hopefully.

v3: Rearrange execbuf to avoid calling i915_gem_object_get_sg() from
within an atomic section and so relax the allocation context to a simple
GFP_KERNEL and mutex.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-10-chris@chris-wilson.co.uk

Add lockdep_assert_held(struct_mutex) to the API preamble of the
internal GEM interfaces.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-9-chris@chris-wilson.co.uk

The golden render state is constant, but we recreate the batch setting
it up for every new context. If we keep that batch in a volatile cache
we can safely reuse it whenever we need to initialise a new context. We
mark the pages as purgeable and use the shrinker to recover pages from
the batch whenever we face memory pressues, recreating that batch afresh
on the next new context.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtien@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-8-chris@chris-wilson.co.uk

Quite a few of our objects used for internal hardware programming do not
benefit from being swappable or from being zero initialised. As such
they do not benefit from using a shmemfs backing storage and since they
are internal and never directly exposed to the user, we do not need to
worry about providing a filp. For these we can use an
drm_i915_gem_object wrapper around a sg_table of plain struct page. They
are not swap backed and not automatically pinned. If they are reaped
by the shrinker, the pages are released and the contents discarded. For
the internal use case, this is fine as for example, ringbuffers are
pinned from being written by a request to be read by the hardware. Once
they are idle, they can be discarded entirely. As such they are a good
match for execlist ringbuffers and a small variety of other internal
objects.

In the first iteration, this is limited to the scratch batch buffers we
use (for command parsing and state initialisation).

v2: Allocate physically contiguous pages, where possible.
v3: Reduce maximum order on subsequent requests following an allocation
failure.
v4: Fix up mismatch between swiotlb segment size and page count (it
counts in 2k units, not 4k pages)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-7-chris@chris-wilson.co.uk

We only need the active reference to keep the object alive after the
handle has been deleted (so as to prevent a synchronous gem_close). Why
then pay the price of a kref on every execbuf when we can insert that
final active ref just in time for the handle deletion?
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-6-chris@chris-wilson.co.uk

Since we only use the more generic unlocked variant, just rename it as
the normal i915_gem_active_wait(). The temporary cost is that we need to
always acquire the reference in a RCU safe manner, but the benefit is
that we will combine the common paths.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-5-chris@chris-wilson.co.uk

Our low-level wait routine has evolved from our generic wait interface
that handled unlocked, RPS boosting, waits with time tracking. If we
push our GEM fence tracking to use reservation_objects (required for
handling multiple timelines), we lose the ability to pass the required
information down to i915_wait_request(). However, if we push the extra
functionality from i915_wait_request() to the individual callsites
(i915_gem_object_wait_rendering and i915_gem_wait_ioctl) that make use
of those extras, we can both simplify our low level wait and prepare for
extending the GEM interface for use of reservation_objects.

v2: Rewrite i915_wait_request() kerneldocs
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-4-chris@chris-wilson.co.uk

The throttle-ioctl never touches the struct_mutex. It does, however, as
part of its ABI report whether the hardware is terminally wedged. For
that purposes, it only has to report the current state and not incur the
cost of checking/waiting every invocation, as we do not have to wait for
a reset before waiting on a request to ensure completion (that is baked
into the wait request implementation).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-3-chris@chris-wilson.co.uk

In forthcoming patches, we want to be able to dynamically allocate the
wait_queue_t used whilst awaiting. This is more convenient if we extend
the i915_sw_fence_await_sw_fence() to perform the allocation for us if
we pass in a gfp mask as an alternative than a preallocated struct.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-2-chris@chris-wilson.co.uk

We will need to wait on DMA completion (as signaled via struct fence)
before executing our i915_gem_request. Therefore we want to expose a
method for adding the await on the fence itself to the request.

v2: Add a comment detailing a failure to handle a signal-on-any
fence-array.
v3: Pretend that magic numbers don't exist.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-1-chris@chris-wilson.co.uk

We are not allowed to touch the GTT entries underneath an atomic section,
as they take a rpm wakelock (which is illegal from atomic context) and
in the near future acquiring the DMA address for a page within an object
may sleep for an allocation. This makes the current shortcircuit in
relocation_iomap() for performing a second relocation on an adjacent page
illegal, and we need to release the atomic iomapping, lookup the DMA,
insert it into the GTT before reentering the atomic iomap section.

As it happens, this is precisely what we do on if we are using an
iomapping over the full object and not just a single page and by
removing the shortcut, we do the right thing.

Fixes: 9c870d03 ("drm/i915: Use RPM as the barrier for controlling...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028142756.3850-1-chris@chris-wilson.co.ukReviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

This was the only use of (misleadingly-named) intel_num_planes()
function, so we can remove it as well.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477522291-10874-3-git-send-email-matthew.d.roper@intel.comReviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>

This macro's name is a bit misleading; it doesn't actually iterate over
all planes since it omits the cursor plane.  Its only uses are in gen9
code which is using it to iterate over the universal planes (which we
treat as primary+sprites); in these cases the legacy cursor registers
are programmed independently if necessary.  The macro's iterator value
(0 for primary plane, spritenum+1 for each secondary plane) also isn't
meaningful outside the gen9 context where the hardware considers them to
all be "universal" planes that follow this numbering.

This is just a renaming/clarification patch with no functional change.
However it will make the subsequent patches more clear.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477522291-10874-2-git-send-email-matthew.d.roper@intel.comReviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>

These static helper functions are required to be used during
fallback link rate implemnetation so they need to be placed at the top
of the file.

v3:
* Add cleanup to other patch (Mika Kahola)
v2:
* Dont move around functions declared in intel_drv.h (Rodrigo Vivi)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477524358-16563-4-git-send-email-manasi.d.navare@intel.com

The port registers related to the phys in broxton map to different
channels and specific phys. Make that mapping explicit.

v2: Pass enum dpio_phy to macros instead of mmio base. (Imre)

v3: Fix typo in macros. (Imre)

v4: Also change variables from u32 to enum dpio_phy. (Imre)
    Remove leftovers from previous version. (Imre)

v5: Actually git add the changes.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476863940-6019-1-git-send-email-ander.conselvan.de.oliveira@intel.com

Use struct bxt_ddi_phy_info to hold information of where the Rcomp
resistor is located, instead of hard coding it in the init sequence.

Note that this moves the enabling of the phy with the Rcomp resistor out
of the power well enable code. That should be safe since
bxt_ddi_phy_init() is called while the power domains lock is held, and
that is the only way that function gets called, so there is no
possibility of a concurrent phy enable caused by a power domain get
call.

v2: Replace comment about lock with lockdep_assert_held()  (Imre)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/62d209950ad48484564f3e793cf247cf62572a39.1475770848.git-series.ander.conselvan.de.oliveira@intel.com

Information about which phy is dual channel is hardcoded in the phy init
sequence. Split that to a separate struct so the init sequence is more
generic.

v2: Restore mangled part that ended up in following patch. (Imre)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/9102f4c984044126057e4fdd1b91a615ff25fae6.1475770848.git-series.ander.conselvan.de.oliveira@intel.com

The vswing sequence is related to the DPIO phy, so move it closer to the
rest of DPIO phy related code.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/59aa5c85a115c5cbed81e793f20cd7b9f8de694b.1475770848.git-series.ander.conselvan.de.oliveira@intel.com

Move the DPIO phy documentation section to intel_dpio_phy.c, since that
is a more suitable place now that there is a source file dedicated for
those phys.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/55a2d38c15c06a8c5bce498b28decc03948f0224.1475770848.git-series.ander.conselvan.de.oliveira@intel.com

The phy in broxton is also a dpio phy, similar to cherryview but with
programming through MMIO. So move the code together with the other
similar phys.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/d611de6d256593cf904172db7ff27f164480c228.1475770848.git-series.ander.conselvan.de.oliveira@intel.com

Pass lane count to bxt_ddi_phy_calc_lane_optmin_mask() instead of having
it extract that number from a pipe_config to decouple the phy code from
intel_crtc_state.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/a4977e0207e594953c4f9d1b5f2ef972a8679e74.1475770848.git-series.ander.conselvan.de.oliveira@intel.com

The mapping from the BXT_DPIO_CMN_* power wells to their respective phys
required a detour implemented in the bxt_power_well_to_phy() function.
Instead, embed that information directly into the power_well struct, by
resurrecting the data field.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/7fe97582fa08c7340ce6a3b6b0ea3e72a73182d7.1475770848.git-series.ander.conselvan.de.oliveira@intel.com

Calling it data seems to imply arbitrary data can be associated with the
power well. However, that field is used for look ups and expected to be
unique, so rename it.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/f3916c3c5bfa793b0fc870fd44007a3ff425194d.1475770848.git-series.ander.conselvan.de.oliveira@intel.com

Backmerge latest drm-next to pull in the s/fence/dma_fence/ rework,
needed before we merge more i915 fencing patches.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Karol's work which greatly improves volt/clock changes on a
heap of boards, nothing too exciting beyond a random collection of fixes.

* 'linux-4.9' of git://github.com/skeggsb/linux: (33 commits)
  drm/nouveau/fb/nv50: defer DMA mapping of scratch page to oneinit() hook
  drm/nouveau/fb/gf100: defer DMA mapping of scratch page to oneinit() hook
  drm/nouveau/pci: set streaming DMA mask early
  drm/nouveau/kms: add Maxwell to backlight initialization
  drm/nouveau/bar/nv50: fix bar2 vm size
  drm/nouveau/disp: remove unused function in sorg94.c
  drm/nouveau/volt: use kernel's 64-bit signed division function
  drm/nouveau/core: add missing header dependencies
  drm/nouveau/gr/nv3x: add 0x0597 kelvin 3d class support
  drm/nouveau/drm/nouveau: add a LED driver for the NVIDIA logo
  drm/nouveau/fb/ram: Use Kepler implementation on Maxwell
  drm/nouveau/volt: Make use of cvb coefficients
  drm/nouveau/volt/gf100-: Add speedo
  drm/nouveau/volt: Add implementation for gf100
  drm/nouveau/bios/vmap: unk0 field is the mode
  drm/nouveau/volt: Don't require perfect fit
  drm/nouveau/clk: Allow boosting only when NvBoost is set
  drm/nouveau/bios: Add parsing of VPSTATE table
  drm/nouveau/clk: Respect voltage limits in nvkm_cstate_prog
  drm/nouveau/clk: Fixup cstate selection
  ...

Pull request already again to get the s/fence/dma_fence/ stuff in and
allow everyone to resync. Otherwise really just misc stuff all over, and a
new bridge driver.

* tag 'topic/drm-misc-2016-10-27' of git://anongit.freedesktop.org/git/drm-intel:
  drm/bridge: fix platform_no_drv_owner.cocci warnings
  drm/bridge: fix semicolon.cocci warnings
  drm: Print some debug/error info during DP dual mode detect
  drm: mark drm_of_component_match_add dummy inline
  drm/bridge: add Silicon Image SiI8620 driver
  dt-bindings: add Silicon Image SiI8620 bridge bindings
  video: add header file for Mobile High-Definition Link (MHL) interface
  drm: convert DT component matching to component_match_add_release()
  dma-buf: Rename struct fence to dma_fence
  dma-buf/fence: add an lockdep_assert_held()
  drm/dp: Factor out helper to distinguish between branch and sink devices
  drm/edid: Only print the bad edid when aborting
  drm/msm: add missing header dependencies
  drm/msm/adreno: move function declarations to header file
  drm/i2c/tda998x: mark symbol static where possible
  doc: add missing docbook parameter for fence-array
  drm: RIP mode_config->rotation_property
  drm/msm/mdp5: Advertize 180 degree rotation
  drm/msm/mdp5: Use per-plane rotation property

First new feature pull for 4.10.  Highlights:
- Support for multple virtual displays in the virtual dce component
- New VM mgr to support non-contiguous vram buffers
- Support for UVD powergating on additional asics
- Power management improvements
- lots of code cleanup and bug fixes

* 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (107 commits)
  drm/amdgpu: turn on/off uvd clock when dpm enable/disable on CI
  drm/amdgpu: disable dpm before turn off clock when vce idle.
  drm/amdgpu: enable uvd bypass mode for CI/VI.
  drm/amdgpu: just not load smc firmware if smu is already running
  drm/amdgpu: when suspend, set boot state instand of disable dpm.
  drm/amdgpu: use failed label to handle context init failure
  drm/amdgpu: add amdgpu_ttm_bo_eviction_valuable callback
  drm/ttm: make eviction decision a driver callback v2
  drm/ttm: fix coding style in ttm_bo_driver.h
  drm/radeon/pm: autoswitch power state when in balanced mode
  drm/amd/powerplay: fix spelling mistake and add KERN_WARNING to printks
  drm/amdgpu:new ids flag for preempt
  drm/amdgpu: mark symbols static where possible
  drm/amdgpu: change function declarations and add missing header dependencies
  drm/amdgpu: s/amdgpuCrtc/amdgpu_crtc/ in pageflip code
  drm/amdgpu/atom: remove a bunch of unused functions
  drm/amdgpu: consolidate atom scratch reg handling for hangs
  drm/amdgpu: use amdgpu_bo_[create|free]_kernel for wb
  drm/amdgpu: add VCE VM session tracking
  drm/amdgpu: improve parse_cs handling a bit
  ...

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

v2: move return value check as well
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

fix pm-hibernate bug, when suspend/resume, dpm start failed.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Newline somehow ended up in the middle of the line.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1477572512-4030-1-git-send-email-tvrtko.ursulin@linux.intel.com

gvt-next-2016-10-27

- Resolve current left build issue with ACPI=n and 32bit kernel
- TLB workaround from Arkadiusz
- vGPU reset fix from Ping
- workload scheduler nesting sleep fix from Changbin
- more misc fixes for sparse warnings and cleanups
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drivers/gpu/drm/bridge/sil-sii8620.c:1556:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

CC: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161026165836.GA98766@lkp-sb04.lkp.intel.com

drivers/gpu/drm/bridge/sil-sii8620.c:988:2-3: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

CC: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161026165836.GA98907@lkp-sb04.lkp.intel.com

We cannot use blocking method mutex_lock inside a wait loop.
Here we invoke pick_next_workload() which needs acquire a
mutex in our "condition" experssion. Then we go into a another
of the going-to-sleep sequence and changing the task state.
This is a dangerous. Let's rewrite the wait sequence to avoid
nested sleeping.

v2: fix do...while loop exit condition (zhenyu)
v3: rebase to gvt-staging branch
Signed-off-by: Du, Changbin <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

throw error message in elsp emulation handler basing on execlist
submit result. guest will trigger tdr process for recovering, gvt
just follow guest's desire.

v2: populate error to top of mmio emulation logic, comments from
zhenyu
Signed-off-by: Bing Niu <bing.niu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>