- 29 Jan, 2021 5 commits
-
-
Lukas Bulwahn authored
Commit 0653c358 ("scsi: Drop gdth driver") fails to update MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains: warning: no file matches F: drivers/scsi/gdt* Remove the GDT SCSI DISK ARRAY CONTROLLER DRIVER section as well, as the driver is removed now. Link: https://lore.kernel.org/r/20210129052829.13642-1-lukas.bulwahn@gmail.comSigned-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Can Guo authored
The initialization of clk_scaling.min_gear was removed by mistake. This change adds it back, otherwise clock scaling down would fail. Link: https://lore.kernel.org/r/1611802172-37802-1-git-send-email-cang@codeaurora.org Fixes: 4543d9d7 ("scsi: ufs: Refactor ufshcd_init/exit_clk_scaling/gating()") Reported-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by:
Bean Huo <beanhuo@micron.com> Reviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Reviewed-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
-
Bjorn Helgaas authored
Fix misspellings of "physical". Link: https://lore.kernel.org/r/20210126211248.2920028-1-helgaas@kernel.orgSigned-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
dingsenjie authored
allocted -> allocated Link: https://lore.kernel.org/r/20210126054908.45468-1-dingsenjie@163.comSigned-off-by:
dingsenjie <dingsenjie@yulong.com> Signed-off-by:
-
Jiapeng Zhong authored
Fix the following coccicheck warnings: ./drivers/scsi/qla2xxx/qla_nvme.c:288:24-26: WARNING !A || A && B is equivalent to !A || B. Link: https://lore.kernel.org/r/1611650554-33019-1-git-send-email-abaci-bugfix@linux.alibaba.comReported-by:
Abaci Robot <abaci@linux.alibaba.com> Reviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Signed-off-by:
-
- 27 Jan, 2021 14 commits
-
-
Bjorn Helgaas authored
Fix misspellings of "physical". Link: https://lore.kernel.org/r/20210126210328.2918631-1-helgaas@kernel.orgSigned-off-by:
-
Anastasia Kovaleva authored
According to FCP-4 (9.4.2): If the command requested that data beyond the length specified by the FCP_DL field be transferred, then the device server shall set the FCP_RESID_OVER bit (see 9.5.8) to one in the FCP_RSP IU and: a) process the command normally except that data beyond the FCP_DL count shall not be requested or transferred; b) transfer no data and return CHECK CONDITION status with the sense key set to ILLEGAL REQUEST and the additional sense code set to INVALID FIELD IN COMMAND INFORMATION UNIT; or c) may transfer data and return CHECK CONDITION status with the sense key set to ABORTED COMMAND and the additional sense code set to INVALID FIELD IN COMMAND INFORMATION UNIT. TCM follows b) and transfers no data for residual writes but returns INVALID FIELD IN CDB instead of INVALID FIELD IN COMMAND INFORMATION UNIT. Change the ASCQ to INVALID FIELD IN COMMAND INFORMATION UNIT to meet the standard. Link: https://lore.kernel.org/r/20201203082035.54566-4-a.kovaleva@yadro.comSigned-off-by:
Anastasia Kovaleva <a.kovaleva@yadro.com> Signed-off-by:
Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by:
-
Anastasia Kovaleva authored
According to RFC 7143 11.4.5.2.: If SPDTL > EDTL for a task, iSCSI Overflow MUST be signaled in the SCSI Response PDU as specified in Section 11.4.5.1. The Residual Count MUST be set to the numerical value of (SPDTL - EDTL). If SPDTL < EDTL for a task, iSCSI Underflow MUST be signaled in the SCSI Response PDU as specified in Section 11.4.5.1. The Residual Count MUST be set to the numerical value of (EDTL - SPDTL). libiscsi has residual write tests that check residual kind and residual amount and all of them (Write10Residuals, Write12Residuals, Write16Residuals) currently fail. One of the reasons why they fail is because target completes write commands with INVALID FIELD IN CDB before setting the Overflow/Underflow bit and residual amount. Set the Overflow/Underflow bit and the residual amount before failing a write to comply with RFC 7143. Link: https://lore.kernel.org/r/20201203082035.54566-3-a.kovaleva@yadro.comSigned-off-by:
-
Roman Bolshakov authored
TCM always fails SBC commands with residuals for 4Kn devices when the command is processed by sbc_parse_cdb(). That prevents residual signalling to the transport driver because residual kind and residual amount aren't set. It also makes residual handling different from 512-byte formatted devices - if there are residuals 512-byte LUN would proceed with command execution while 4K-byte LUN would fail. Link: https://lore.kernel.org/r/20201203082035.54566-2-a.kovaleva@yadro.com Based-on: https://patchwork.kernel.org/project/target-devel/patch/20170523234854.21452-31-bart.vanassche@sandisk.com/Based-on-patch-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Konstantin Vinogradov <k.vinogradov@yadro.com> Signed-off-by:
-
Luo Jiaxing authored
The controller provides trace FIFO DFX tool to assist link fault debugging and link optimization. This tool can be helpful when debugging link faults without SAS analyzers. Each PHY has an independent trace FIFO interface. The user can configure the trace FIFO tool of one PHY by using the following six interfaces: signal_sel: select signal group applies to different scenarios. 0x0: linkrate negotiation 0x1: Host 12G TX train 0x2: Disk 12G TX train 0x3: SAS PHY CTRL DFX 0 0x4: SAS PHY CTRL DFX 1 0x5: SAS PCS DFX other: linkrate negotiation dump_mask: The masked hardware status bit will not be updated. dump_mode: determines how to dump data after trigger signal is generated. 0x0: dump forever 0x1: dump 32 data after trigger signal is generated 0x2: no more dump after trigger signal is generated trigger_mode: determines the trigger mode, level or edge. 0x0: dump when trigger signal changed 0x1: dump when trigger signal's level equal to trigger_level 0x2: dump when trigger signal's level different from trigger_level trigger_level: determines the trigger level. trigger_msk: mask trigger signal The user can get 32-byte values from hardware by reading the rd_data. These values consitute the status record of the hardware at different time points. Link: https://lore.kernel.org/r/1611659068-131975-6-git-send-email-john.garry@huawei.comSigned-off-by:
Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Luo Jiaxing authored
If the controller reset occurs at the same time as driver removal, it may be possible that the interrupts have been released prior to the host softreset, and calling pci_irq_vector() there causes a WARN: WARNING: CPU: 37 PID: 1542 /pci/msi.c:1275 pci_irq_vector+0xc0/0xd0 Call trace: pci_irq_vector+0xc0/0xd0 disable_host_v3_hw+0x58/0x5b0 [hisi_sas_v3_hw] soft_reset_v3_hw+0x40/0xc0 [hisi_sas_v3_hw] hisi_sas_controller_reset+0x150/0x260 [hisi_sas_main] hisi_sas_rst_work_handler+0x3c/0x58 [hisi_sas_main] To fix, flush the driver workqueue prior to releasing the interrupts to ensure any resets have been completed. Link: https://lore.kernel.org/r/1611659068-131975-5-git-send-email-john.garry@huawei.comSigned-off-by:
-
Luo Jiaxing authored
Add a config option to enable debugfs support by default. And if debugfs support is enabled by default, dump count default value is increased to 50 as generally users want something bigger than the current default in that situation. Link: https://lore.kernel.org/r/1611659068-131975-4-git-send-email-john.garry@huawei.comSigned-off-by:
-
John Garry authored
Now that v2 and v3 hw expose their HW queues (and so shost.nr_hw_queues is set), remove the conditional checks in hisi_sas_task_prep(). This change would affect v1 HW performance (as it does not expose HW queues), but nobody uses it and support may be dropped soon. Link: https://lore.kernel.org/r/1611659068-131975-3-git-send-email-john.garry@huawei.comReviewed-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
-
John Garry authored
The platform_get_irq() check for -EPROBE_DEFER was to ensure that all the steps to add the SCSI host are not done and then only to realise that the probe needs to be deferred. However, since there is now an earlier check for this in hisi_sas_interrupt_preinit(), this check is superfluous and may be removed. Link: https://lore.kernel.org/r/1611659068-131975-2-git-send-email-john.garry@huawei.comSigned-off-by:
-
Tong Zhang authored
lpfc depends on irq_poll library, but it is not selected automatically. When irq_poll is not selected, compiling it can run into following error ERROR: modpost: "irq_poll_init" [drivers/scsi/lpfc/lpfc.ko] undefined! ERROR: modpost: "irq_poll_sched" [drivers/scsi/lpfc/lpfc.ko] undefined! ERROR: modpost: "irq_poll_complete" [drivers/scsi/lpfc/lpfc.ko] undefined! Link: https://lore.kernel.org/r/20210126000554.309858-1-ztong0001@gmail.comReviewed-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
Tong Zhang <ztong0001@gmail.com> Signed-off-by:
-
Hannes Reinecke authored
The patch to switch using SAM status values had some typos; fix them up. Link: https://lore.kernel.org/r/20210125085415.70574-1-hare@suse.de Fixes: 491152c7 ("scsi: ncr53c8xx: Use SAM status values") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Dan Carpenter authored
The "pmb" pointer is freed at the start of the function and then freed again in the error handling code. Link: https://lore.kernel.org/r/YA6E8rO51hE56SVw@mwanda Fixes: 92d7f7b0 ("[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
This was supposed to be "data" instead of "&data". The current code will corrupt the stack. Link: https://lore.kernel.org/r/YA6E0geUlL9Hs04A@mwanda Fixes: dbf1f53c ("scsi: qla2xxx: Implementation to get and manage host, target stats and initiator port") Acked-by:
Saurav Kashyap <skashyap@marvell.com> Signed-off-by:
-
Martin K. Petersen authored
The UFS core has received a substantial rework this cycle. This in turn has caused a merge conflict in linux-next. Merge 5.11/scsi-fixes into 5.12/scsi-queue and resolve the conflict. Signed-off-by:
-
- 23 Jan, 2021 21 commits
-
-
Yang Li authored
Fix below warnings reported by coccicheck: ./drivers/scsi/qla2xxx/qla_init.c:3371:2-7: WARNING: NULL check before some freeing functions is not needed. ./drivers/scsi/qla2xxx/qla_init.c:7855:5-10: WARNING: NULL check before some freeing functions is not needed. ./drivers/scsi/qla2xxx/qla_init.c:7916:2-7: WARNING: NULL check before some freeing functions is not needed. ./drivers/scsi/qla2xxx/qla_init.c:8113:4-18: WARNING: NULL check before some freeing functions is not needed. ./drivers/scsi/qla2xxx/qla_init.c:8174:2-7: WARNING: NULL check before some freeing functions is not needed. Link: https://lore.kernel.org/r/1611306174-92627-1-git-send-email-abaci-bugfix@linux.alibaba.comReported-by:
-
kernel test robot authored
NULL check before vfree is not needed. Generated by: scripts/coccinelle/free/ifnullfree.cocci Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2012111113060.2669@hadrienReported-by:
Julia Lawall <julia.lawall@inria.fr> Signed-off-by:
-
René Rebe authored
Since Linus Torvalds reinstated KERN_CONT in commit 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") in 2015, the qla1280 SCSI driver printed a rather ugly and screen real estate wasting multi-line per device status glibberish during boot. Fix this by adding KERN_CONT as needed. Tested on my Sgi Octane: https://youtu.be/Lfqe1SYR2jk Link: https://lore.kernel.org/r/20201210.223944.388095546873159172.rene@exactcode.comSigned-off-by:
René Rebe <rene@exactcode.de> Signed-off-by:
-
Bean Huo authored
Delete ufshcd_wb_buf_flush_enable() and ufshcd_wb_buf_flush_disable(). Move the implementation into ufshcd_wb_toggle_flush(). Link: https://lore.kernel.org/r/20210121185736.12471-1-huobean@gmail.comReviewed-by:
-
Dan Carpenter authored
The list iterator can't be NULL so this check is not required. Removing the check silences a Smatch warning about inconsistent NULL checking. drivers/scsi/qla2xxx/qla_dfs.c:371 qla_dfs_tgt_counters_show() error: we previously assumed 'fcport' could be null (see line 372) Link: https://lore.kernel.org/r/YAkaaSrhn1mFqyHy@mwandaAcked-by: -
Jiapeng Zhong authored
Fix the following coccicheck warnings: ./drivers/scsi/qla2xxx/qla_isr.c:780:2-18: WARNING: Assignment of 0/1 to bool variable. Link: https://lore.kernel.org/r/1611127919-56551-1-git-send-email-abaci-bugfix@linux.alibaba.comReported-by:
-
Eric Curtin authored
Comment did not match function signature. Link: https://lore.kernel.org/r/20210119205022.40000-1-ericcurtin17@gmail.comSigned-off-by:
Eric Curtin <ericcurtin17@gmail.com> Signed-off-by:
-
YANG LI authored
Fix the following coccicheck warning: ./drivers/scsi/mpt3sas/mpt3sas_base.c:2424:5-20: WARNING: Comparison of 0/1 to bool variable Link: https://lore.kernel.org/r/1610355253-25960-1-git-send-email-abaci-bugfix@linux.alibaba.comReported-by:
-
Ahmed S. Darwish authored
These variants were added for bisectability. Remove them, as all call sites have now been convertd to use the original API. Link: https://lore.kernel.org/r/20210118100955.1761652-20-a.darwish@linutronix.de Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by:
Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by:
-
Ahmed S. Darwish authored
libsas event notifiers required an extension where gfp_t flags must be explicitly passed. For bisectability, a temporary _gfp() variant of such functions were added. All call sites then got converted use the _gfp() variants and explicitly pass GFP context. Having no callers left, the original libsas notifiers were then modified to accept gfp_t flags by default. Switch back to the original libas API, while still passing GFP context. The libsas _gfp() variants will be removed afterwards. Link: https://lore.kernel.org/r/20210118100955.1761652-19-a.darwish@linutronix.deReviewed-by:
-
Ahmed S. Darwish authored
libsas event notifiers required an extension where gfp_t flags must be explicitly passed. For bisectability, a temporary _gfp() variant of such functions were added. All call sites then got converted use the _gfp() variants and explicitly pass GFP context. Having no callers left, the original libsas notifiers were then modified to accept gfp_t flags by default. Switch back to the original libas API, while still passing GFP context. The libsas _gfp() variants will be removed afterwards. Link: https://lore.kernel.org/r/20210118100955.1761652-18-a.darwish@linutronix.de Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Reviewed-by:
-
Ahmed S. Darwish authored
libsas event notifiers required an extension where gfp_t flags must be explicitly passed. For bisectability, a temporary _gfp() variant of such functions were added. All call sites then got converted use the _gfp() variants and explicitly pass GFP context. Having no callers left, the original libsas notifiers were then modified to accept gfp_t flags by default. Switch back to the original event notifiers API, while still passing GFP context. The _gfp() notifier variants will be removed afterwards. Link: https://lore.kernel.org/r/20210118100955.1761652-17-a.darwish@linutronix.de Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by:
-
Ahmed S. Darwish authored
libsas event notifiers required an extension where gfp_t flags must be explicitly passed. For bisectability, a temporary _gfp() variant of such functions were added. All call sites then got converted use the _gfp() variants and explicitly pass GFP context. Having no callers left, the original libsas notifiers were then modified to accept gfp_t flags by default. Switch back to the original libas API, while still passing GFP context. The libsas _gfp() variants will be removed afterwards. Link: https://lore.kernel.org/r/20210118100955.1761652-16-a.darwish@linutronix.de Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by:
-
Ahmed S. Darwish authored
libsas event notifiers required an extension where gfp_t flags must be explicitly passed. For bisectability, a temporary _gfp() variant of such functions were added. All call sites then got converted use the _gfp() variants and explicitly pass GFP context. Having no callers left, the original libsas notifiers were then modified to accept gfp_t flags by default. Switch back to the original libas API, while still passing GFP context. The libsas _gfp() variants will be removed afterwards. Link: https://lore.kernel.org/r/20210118100955.1761652-15-a.darwish@linutronix.deReviewed-by:
-
Ahmed S. Darwish authored
libsas event notifiers required an extension where gfp_t flags must be explicitly passed. For bisectability, a temporary _gfp() variant of such functions were added. All call sites then got converted use the _gfp() variants and explicitly pass GFP context. Having no callers left, the original libsas notifiers were then modified to accept gfp_t flags by default. Switch back to the original libas API, while still passing GFP context. The libsas _gfp() variants will be removed afterwards. Link: https://lore.kernel.org/r/20210118100955.1761652-14-a.darwish@linutronix.deReviewed-by:
-
Ahmed S. Darwish authored
All call-sites of below libsas APIs: - sas_alloc_event() - sas_notify_port_event() - sas_notify_phy_event() have been converted to use the _gfp()-suffixed version. Modify the original APIs above to take a gfp_t flags parameter by default. For bisectability, call-sites will be modified again to use the original libsas APIs (while passing gfp_t). The temporary _gfp()-suffixed versions can then be removed. Link: https://lore.kernel.org/r/20210118100955.1761652-13-a.darwish@linutronix.de Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by:
-
Ahmed S. Darwish authored
Use the new libsas event notifiers API, which requires callers to explicitly pass the gfp_t memory allocation flags. Below are the context analysis for modified functions: => hisi_sas_bytes_dmaed(): Since it is invoked from both process and atomic contexts, let its callers pass the gfp_t flags: * hisi_sas_main.c: ------------------ hisi_sas_phyup_work(): workqueue context -> hisi_sas_bytes_dmaed(..., GFP_KERNEL) hisi_sas_controller_reset_done(): has an msleep() -> hisi_sas_rescan_topology() -> hisi_sas_phy_down() -> hisi_sas_bytes_dmaed(..., GFP_KERNEL) hisi_sas_debug_I_T_nexus_reset(): calls wait_for_completion_timeout() -> hisi_sas_phy_down() -> hisi_sas_bytes_dmaed(..., GFP_KERNEL) * hisi_sas_v1_hw.c: ------------------- int_abnormal_v1_hw(): irq handler -> hisi_sas_phy_down() -> hisi_sas_bytes_dmaed(..., GFP_ATOMIC) * hisi_sas_v[23]_hw.c: ---------------------- int_phy_updown_v[23]_hw(): irq handler -> phy_down_v[23]_hw() -> hisi_sas_phy_down() -> hisi_sas_bytes_dmaed(..., GFP_ATOMIC) => int_bcast_v1_hw() and phy_bcast_v3_hw(): Both are invoked exclusively from irq handlers. Pass GFP_ATOMIC. Link: https://lore.kernel.org/r/20210118100955.1761652-12-a.darwish@linutronix.deReviewed-by: -
Ahmed S. Darwish authored
Use the new libsas event notifiers API, which requires callers to explicitly pass the gfp_t memory allocation flags. Context analysis: aic94xx_hwi.c: asd_dl_tasklet_handler() -> asd_ascb::tasklet_complete() == escb_tasklet_complete() -> aic94xx_scb.c: asd_phy_event_tasklet() -> aic94xx_scb.c: asd_bytes_dmaed_tasklet() -> aic94xx_scb.c: asd_link_reset_err_tasklet() -> aic94xx_scb.c: asd_primitive_rcvd_tasklet() All functions are invoked by escb_tasklet_complete(), which is invoked by the tasklet handler. Pass GFP_ATOMIC. Link: https://lore.kernel.org/r/20210118100955.1761652-11-a.darwish@linutronix.deReviewed-by: -
Ahmed S. Darwish authored
Use the new libsas event notifiers API, which requires callers to explicitly pass the gfp_t memory allocation flags. Call chain analysis, pm8001_hwi.c: pm8001_interrupt_handler_msix() || pm8001_interrupt_handler_intx() || pm8001_tasklet() -> PM8001_CHIP_DISP->isr() = pm80xx_chip_isr() -> process_oq [spin_lock_irqsave(&pm8001_ha->lock, ...)] -> process_one_iomb() -> mpi_hw_event() -> hw_event_sas_phy_up() -> pm8001_bytes_dmaed() -> hw_event_sata_phy_up -> pm8001_bytes_dmaed() All functions are invoked by process_one_iomb(), which is invoked by the interrupt service routine and the tasklet handler. A similar call chain is also found at pm80xx_hwi.c. Pass GFP_ATOMIC. For pm8001_sas.c, pm8001_phy_control() runs in task context as it calls wait_for_completion() and msleep(). Pass GFP_KERNEL. Link: https://lore.kernel.org/r/20210118100955.1761652-10-a.darwish@linutronix.de Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: -
Ahmed S. Darwish authored
Use the new libsas event notifiers API, which requires callers to explicitly pass the gfp_t memory allocation flags. Context analysis: - sas_enable_revalidation(): process, acquires mutex - sas_resume_ha(): process, calls wait_event_timeout() Link: https://lore.kernel.org/r/20210118100955.1761652-9-a.darwish@linutronix.de Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by:
-
Ahmed S. Darwish authored
Use the new libsas event notifiers API, which requires callers to explicitly pass the gfp_t memory allocation flags. libsas sas_notify_port_event() is called from isci_port_bc_change_received(). Below is the context analysis for all of its call chains: host.c: sci_controller_error_handler(): atomic, irq handler (*) OR host.c: sci_controller_completion_handler(), atomic, tasklet (*) -> sci_controller_process_completions() -> sci_controller_event_completion() -> phy.c: sci_phy_event_handler() -> port.c: sci_port_broadcast_change_received() -> isci_port_bc_change_received() host.c: isci_host_init() (@) spin_lock_irq(isci_host::scic_lock) -> sci_controller_initialize(), atomic (*) -> port_config.c: sci_port_configuration_agent_initialize() -> sci_mpc_agent_validate_phy_configuration() -> port.c: sci_port_add_phy() -> sci_port_set_phy() -> phy.c: sci_phy_set_port() -> port.c: sci_port_broadcast_change_received() -> isci_port_bc_change_received() port_config.c: apc_agent_timeout(), atomic, timer callback (*) -> sci_apc_agent_configure_ports() -> port.c: sci_port_add_phy() -> sci_port_set_phy() -> phy.c: sci_phy_set_port() -> port.c: sci_port_broadcast_change_received() -> isci_port_bc_change_received() phy.c: enter SCI state: *SCI_PHY_STOPPED* # Cont. from [1] -> sci_phy_stopped_state_enter() -> host.c: sci_controller_link_down() -> ->link_down_handler() == port_config.c: sci_apc_agent_link_down() -> port.c: sci_port_remove_phy() -> sci_port_clear_phy() -> phy.c: sci_phy_set_port() -> port.c: sci_port_broadcast_change_received() -> isci_port_bc_change_received() phy.c: enter SCI state: *SCI_PHY_STARTING* # Cont. from [2] -> sci_phy_starting_state_enter() -> host.c: sci_controller_link_down() -> ->link_down_handler() == port_config.c: sci_apc_agent_link_down() -> port.c: sci_port_remove_phy() -> sci_port_clear_phy() -> phy.c: sci_phy_set_port() -> port.c: sci_port_broadcast_change_received() -> isci_port_bc_change_received() [1] Call chains for entering state: *SCI_PHY_STOPPED* ----------------------------------------------------- host.c: isci_host_init() (@) spin_lock_irq(isci_host::scic_lock) -> sci_controller_initialize(), atomic (*) -> phy.c: sci_phy_initialize() -> phy.c: sci_phy_link_layer_initialization() -> phy.c: sci_change_state(SCI_PHY_STOPPED) init.c: PCI ->remove() || PM_OPS ->suspend, process context (+) -> host.c: isci_host_deinit() -> sci_controller_stop_phys() -> phy.c: sci_phy_stop() -> sci_change_state(SCI_PHY_STOPPED) phy.c: isci_phy_control() spin_lock_irqsave(isci_host::scic_lock, ) -> sci_phy_stop(), atomic (*) -> sci_change_state(SCI_PHY_STOPPED) [2] Call chains for entering state: *SCI_PHY_STARTING* ------------------------------------------------------ phy.c: phy_sata_timeout(), atimer, timer callback (*) spin_lock_irqsave(isci_host::scic_lock, ) -> sci_change_state(SCI_PHY_STARTING) host.c: phy_startup_timeout(), atomic, timer callback (*) spin_lock_irqsave(isci_host::scic_lock, ) -> sci_controller_start_next_phy() -> sci_phy_start() -> sci_change_state(SCI_PHY_STARTING) host.c: isci_host_start() (@) spin_lock_irq(isci_host::scic_lock) -> sci_controller_start(), atomic (*) -> sci_controller_start_next_phy() -> sci_phy_start() -> sci_change_state(SCI_PHY_STARTING) phy.c: Enter SCI state *SCI_PHY_SUB_FINAL* # Cont. from [2A] -> sci_change_state(SCI_PHY_SUB_FINAL) -> sci_phy_starting_final_substate_enter() -> sci_change_state(SCI_PHY_READY) -> Enter SCI state: *SCI_PHY_READY* -> sci_phy_ready_state_enter() -> host.c: sci_controller_link_up() -> sci_controller_start_next_phy() -> sci_phy_start() -> sci_change_state(SCI_PHY_STARTING) phy.c: sci_phy_event_handler(), atomic, discussed earlier (*) -> sci_change_state(SCI_PHY_STARTING), 11 instances port.c: isci_port_perform_hard_reset() spin_lock_irqsave(isci_host::scic_lock, ) -> port.c: sci_port_hard_reset(), atomic (*) -> phy.c: sci_phy_reset() -> sci_change_state(SCI_PHY_RESETTING) -> enter SCI PHY state: *SCI_PHY_RESETTING* -> sci_phy_resetting_state_enter() -> sci_change_state(SCI_PHY_STARTING) [2A] Call chains for entering SCI state: *SCI_PHY_SUB_FINAL* ------------------------------------------------------------ host.c: power_control_timeout(), atomic, timer callback (*) spin_lock_irqsave(isci_host::scic_lock, ) -> phy.c: sci_phy_consume_power_handler() -> phy.c: sci_change_state(SCI_PHY_SUB_FINAL) host.c: sci_controller_error_handler(): atomic, irq handler (*) OR host.c: sci_controller_completion_handler(), atomic, tasklet (*) -> sci_controller_process_completions() -> sci_controller_unsolicited_frame() -> phy.c: sci_phy_frame_handler() -> sci_change_state(SCI_PHY_SUB_AWAIT_SAS_POWER) -> sci_phy_starting_await_sas_power_substate_enter() -> host.c: sci_controller_power_control_queue_insert() -> phy.c: sci_phy_consume_power_handler() -> sci_change_state(SCI_PHY_SUB_FINAL) -> sci_change_state(SCI_PHY_SUB_FINAL) -> sci_controller_event_completion() -> phy.c: sci_phy_event_handler() -> sci_phy_start_sata_link_training() -> sci_change_state(SCI_PHY_SUB_AWAIT_SATA_POWER) -> sci_phy_starting_await_sata_power_substate_enter -> host.c: sci_controller_power_control_queue_insert() -> phy.c: sci_phy_consume_power_handler() -> sci_change_state(SCI_PHY_SUB_FINAL) As can be seen from the "(*)" markers above, almost all the call-chains are atomic. The only exception, marked with "(+)", is a PCI ->remove() and PM_OPS ->suspend() cold path. Thus, pass GFP_ATOMIC to the libsas port event notifier. Note, the now-replaced libsas APIs used in_interrupt() to implicitly decide which memory allocation type to use. This was only partially correct, as it fails to choose the correct GFP flags when just preemption or interrupts are disabled. Such buggy code paths are marked with "(@)" in the call chains above. Link: https://lore.kernel.org/r/20210118100955.1761652-8-a.darwish@linutronix.de Fixes: 1c393b97 ("scsi: libsas: Use dynamic alloced work to avoid sas event lost") Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Reviewed-by:
-
