- 05 Aug, 2015 3 commits
-
-
Xiao Guangrong authored
FNAME(is_rsvd_bits_set) does not depend on guest mmu mode, move it to mmu.c to stop being compiled multiple times Signed-off-by:
Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Xiao Guangrong authored
We got the bug that qemu complained with "KVM: unknown exit, hardware reason 31" and KVM shown these info: [84245.284948] EPT: Misconfiguration. [84245.285056] EPT: GPA: 0xfeda848 [84245.285154] ept_misconfig_inspect_spte: spte 0x5eaef50107 level 4 [84245.285344] ept_misconfig_inspect_spte: spte 0x5f5fadc107 level 3 [84245.285532] ept_misconfig_inspect_spte: spte 0x5141d18107 level 2 [84245.285723] ept_misconfig_inspect_spte: spte 0x52e40dad77 level 1 This is because we got a mmio #PF and the handler see the mmio spte becomes normal (points to the ram page) However, this is valid after introducing fast mmio spte invalidation which increases the generation-number instead of zapping mmio sptes, a example is as follows: 1. QEMU drops mmio region by adding a new memslot 2. invalidate all mmio sptes 3. VCPU 0 VCPU 1 access the invalid mmio spte access the region originally was MMIO before set the spte to the normal ram map mmio #PF check the spte and see it becomes normal ram mapping !!! This patch fixes the bug just by dropping the check in mmio handler, it's good for backport. Full check will be introduced in later patches Reported-by:Pavel Shirshov <ru.pchel@gmail.com> Tested-by:
-
Alex Williamson authored
The patch was munged on commit to re-order these tests resulting in excessive warnings when trying to do device assignment. Return to original ordering: https://lkml.org/lkml/2015/7/15/769 Fixes: 3e5d2fdc ("KVM: MTRR: simplify kvm_mtrr_get_guest_memory_type") Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Reviewed-by:
-
- 30 Jul, 2015 2 commits
-
-
Paolo Bonzini authored
The memory barriers are trying to protect against concurrent RCU-based interrupt injection, but the IRQ routing table is not valid at the time kvm->arch.vpic is written. Fix this by writing kvm->arch.vpic last. kvm_destroy_pic then need not set kvm->arch.vpic to NULL; modify it to take a struct kvm_pic* and reuse it if the IOAPIC creation fails. Signed-off-by: -
Paolo Bonzini authored
Signed-off-by:
-
- 29 Jul, 2015 19 commits
-
-
Paolo Bonzini authored
There is no smp_rmb matching the smp_wmb. shared_msr_update is called from hardware_enable, which in turn is called via on_each_cpu. on_each_cpu and must imply a read memory barrier (on x86 the rmb is achieved simply through asm volatile in native_apic_mem_write). Signed-off-by: -
Paolo Bonzini authored
This is another remnant of ia64 support. Signed-off-by: -
Paolo Bonzini authored
Merge tag 'kvm-s390-next-20150728' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next KVM: s390: Fixes and features for kvm/next (4.3) 1. Rework logging infrastructure (s390dbf) to integrate feedback learned when debugging performance and test issues 2. Some cleanups and simplifications for CMMA handling 3. Fix gdb debugging and single stepping on some instructions 4. Error handling for storage key setup
-
Christian Borntraeger authored
Depending on user space, some capabilities and vm attributes are enabled at runtime. Let's log those events and while we're at it, log querying the vm attributes as well. Signed-off-by:Christian Borntraeger <borntraeger@de.ibm.com>
-
Christian Borntraeger authored
In addition to the per VM debug logs, let's provide a global one for KVM-wide events, like new guests or fatal errors. Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com>
-
Christian Borntraeger authored
Use the default log level 3 for state changing and/or seldom events, use 4 for others. Also change some numbers from %x to %d and vice versa to match documentation. If hex, let's prepend the numbers with 0x. Signed-off-by:
Cornelia Huck <cornelia.huck@de.ibm.com>
-
Christian Borntraeger authored
We do not use the exception logger, so the 2nd area is unused. Just have one area that is bigger (32 pages). At the same time we can limit the debug feature size to 7 longs, as the largest user has 3 parameters + string + boiler plate (vCPU, PSW mask, PSW addr) Signed-off-by:
-
Christian Borntraeger authored
The old Documentation/s390/kvm.txt file is either outdated or described in Documentation/virtual/kvm/api.txt. Let's get rid of it. Signed-off-by:
-
David Hildenbrand authored
This patch adds names for missing irq types to the trace events. In order to identify adapter irqs, the define is moved from interrupt.c to the other basic irq defines in uapi/linux/kvm.h. Acked-by:
-
Christian Borntraeger authored
This reworks the debug logging for interrupt related logs. Several changes: - unify program int/irq - improve decoding (e.g. use mcic instead of parm64 for machine check injection) - remove useless interrupt type number (the name is enough) - rename "interrupt:" to "deliver:" as the other side is called "inject" - use log level 3 for state changing and/or seldom events (like machine checks, restart..) - use log level 4 for frequent events - use 0x prefix for hex numbers - add pfault done logging - move some tracing outside spinlock Signed-off-by:
Jens Freimann <jfrei@linux.vnet.ibm.com>
-
Christian Borntraeger authored
We're not only interested in the address of the control block, but also in the requested subcommand and for the token subcommand, in the specified token address and masks. Suggested-by:
-
David Hildenbrand authored
The "from user"/"from kernel" part of the log/trace messages is not always correct anymore and therefore not really helpful. Let's remove that part from the log + trace messages. For program interrupts, we can now move the logging/tracing part into the real injection function, as already done for the other injection functions. Reviewed-by:
-
Christian Borntraeger authored
SPX (SET PREFIX) and SIGP (Set prefix) can change the prefix register of a CPU. As sigp set prefix may be handled in user space (KVM_CAP_S390_USER_SIGP), we would not log the changes triggered via SIGP in that case. Let's have just one VCPU_EVENT at the central location that tracks prefix changes. Signed-off-by:
-
Christian Borntraeger authored
Let's add a vcpu event for the page reference handling and change the default debugging level for the ipl diagnose. Both are not frequent AND change the global state, so lets log them always. Signed-off-by: -
Christian Borntraeger authored
Sometimes kvm stat counters are the only performance metric to check after something went wrong. Let's add additional counters for some diagnoses. In addition do the count for diag 10 all the time, even if we inject a program interrupt. Signed-off-by:
-
Dominik Dingel authored
There is no point in resetting the CMMA state if it was never enabled. Signed-off-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by:
-
Dominik Dingel authored
As we already only enable CMMA when userspace requests it, we can safely move the additional checks to the request handler and avoid doing them multiple times. This also tells userspace if CMMA is available. Signed-off-by:
-
David Hildenbrand authored
When guest debugging is active, space-switch events might be enforced by PER. While the PER events are correctly filtered out, space-switch-events could be forwarded to the guest, although from a guest point of view, they should not have been reported. Therefore we have to filter out space-switch events being concurrently reported with a PER event, if the PER event got filtered out. To do so, we theoretically have to know which instruction was responsible for the event. As the applicable instructions modify the PSW address, the address space set in the PSW and even the address space in cr1, we can't figure out the instruction that way. For this reason, we have to rely on the information about the old and new address space, in order to guess the responsible instruction type and do appropriate checks for space-switch events. Signed-off-by:
-
Dominik Dingel authored
As enabling storage keys might fail, we should forward the error. Signed-off-by:
-
- 23 Jul, 2015 12 commits
-
-
Paolo Bonzini authored
We can disable CD unconditionally when there is no assigned device. KVM now forces guest PAT to all-writeback in that case, so it makes sense to also force CR0.CD=0. When there are assigned devices, emulate cache-disabled operation through the page tables. This behavior is consistent with VMX microcode, where CD/NW are not touched by vmentry/vmexit. However, keep this dependent on the quirk because OVMF enables the caches too late. Signed-off-by: -
Mihai Donțu authored
Allow a nested hypervisor to single step its guests. Signed-off-by:
Mihai Donțu <mihai.dontu@gmail.com> [Fix overlong line. - Paolo] Signed-off-by:
-
Andrey Smetanin authored
Sending of notification is done by exiting vcpu to user space if KVM_REQ_HV_CRASH is enabled for vcpu. At exit to user space the kvm_run structure contains system_event with type KVM_SYSTEM_EVENT_CRASH to notify about guest crash occurred. Signed-off-by:
Andrey Smetanin <asmetanin@virtuozzo.com> Signed-off-by:
Denis V. Lunev <den@openvz.org> Reviewed-by:
Peter Hornyack <peterhornyack@google.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Gleb Natapov <gleb@kernel.org> Signed-off-by:
-
Andrey Smetanin authored
Added kvm Hyper-V context hv crash variables as storage of Hyper-V crash msrs. Signed-off-by:
-
Andrey Smetanin authored
vcpu_debug is useful macro like kvm_debug but additionally includes vcpu context inside output. Signed-off-by:
-
Andrey Smetanin authored
This patch introduce Hyper-V related source code file - hyperv.c and per vm and per vcpu hyperv context structures. All Hyper-V MSR's and hypercall code moved into hyperv.c. All Hyper-V kvm/vcpu fields moved into appropriate hyperv context structures. Copyrights and authors information copied from x86.c to hyperv.c. Signed-off-by:
-
Eugene Korenevsky authored
According to Intel SDM several checks must be applied for memory operands of VMX instructions. Long mode: #GP(0) or #SS(0) depending on the segment must be thrown if the memory address is in a non-canonical form. Protected mode, checks in chronological order: - The segment type must be checked with access type (read or write) taken into account. For write access: #GP(0) must be generated if the destination operand is located in a read-only data segment or any code segment. For read access: #GP(0) must be generated if if the source operand is located in an execute-only code segment. - Usability of the segment must be checked. #GP(0) or #SS(0) depending on the segment must be thrown if the segment is unusable. - Limit check. #GP(0) or #SS(0) depending on the segment must be thrown if the memory operand effective address is outside the segment limit. Signed-off-by:
Eugene Korenevsky <ekorenevsky@gmail.com> Signed-off-by:
-
Paolo Bonzini authored
Make them clearly architecture-dependent; the capability is valid for all architectures, but the argument is not. Signed-off-by: -
Xiao Guangrong authored
OVMF depends on WB to boot fast, because it only clears caches after it has set up MTRRs---which is too late. Let's do writeback if CR0.CD is set to make it happy, similar to what SVM is already doing. Signed-off-by:
Xiao Guangrong <guangrong.xiao@intel.com> Tested-by:
-
Paolo Bonzini authored
The logic of the disabled_quirks field usually results in a double negation. Wrap it in a simple function that checks the bit and negates it. Based on a patch from Xiao Guangrong. Signed-off-by: -
Xiao Guangrong authored
kvm_mtrr_get_guest_memory_type never returns -1 which is implied in the current code since if @type = -1 (means no MTRR contains the range), iter.partial_map must be true Simplify the code to indicate this fact Signed-off-by:
-
Xiao Guangrong authored
Currently code uses default memory type if MTRR is fully disabled, fix it by using UC instead. Signed-off-by:
-
- 22 Jul, 2015 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't use shared bluetooth antenna in iwlwifi driver for management frames, from Emmanuel Grumbach. 2) Fix device ID check in ath9k driver, from Felix Fietkau. 3) Off by one in xen-netback BUG checks, from Dan Carpenter. 4) Fix IFLA_VF_PORT netlink attribute validation, from Daniel Borkmann. 5) Fix races in setting peeked bit flag in SKBs during datagram receive. If it's shared we have to clone it otherwise the value can easily be corrupted. Fix from Herbert Xu. 6) Revert fec clock handling change, causes regressions. From Fabio Estevam. 7) Fix use after free in fq_codel and sfq packet schedulers, from WANG Cong. 8) ipvlan bug fixes (memory leaks, missing rcu_dereference_bh, etc.) from WANG Cong and Konstantin Khlebnikov. 9) Memory leak in act_bpf packet action, from Alexei Starovoitov. 10) ARM bpf JIT bug fixes from Nicolas Schichan. 11) Fix backwards compat of ANY_LAYOUT in virtio_net driver, from Michael S Tsirkin. 12) Destruction of bond with different ARP header types not handled correctly, fix from Nikolay Aleksandrov. 13) Revert GRO receive support in ipv6 SIT tunnel driver, causes regressions because the GRO packets created cannot be processed properly on the GSO side if we forward the frame. From Herbert Xu. 14) TCCR update race and other fixes to ravb driver from Sergei Shtylyov. 15) Fix SKB leaks in caif_queue_rcv_skb(), from Eric Dumazet. 16) Fix panics on packet scheduler filter replace, from Daniel Borkmann. 17) Make sure AF_PACKET sees properly IP headers in defragmented frames (via PACKET_FANOUT_FLAG_DEFRAG option), from Edward Hyunkoo Jee. 18) AF_NETLINK cannot hold mutex in RCU callback, fix from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (84 commits) ravb: fix ring memory allocation net: phy: dp83867: Fix warning check for setting the internal delay openvswitch: allocate nr_node_ids flow_stats instead of num_possible_nodes netlink: don't hold mutex in rcu callback when releasing mmapd ring ARM: net: fix vlan access instructions in ARM JIT. ARM: net: handle negative offsets in BPF JIT. ARM: net: fix condition for load_order > 0 when translating load instructions. tcp: suppress a division by zero warning drivers: net: cpsw: remove tx event processing in rx napi poll inet: frags: fix defragmented packet's IP header for af_packet net: mvneta: fix refilling for Rx DMA buffers stmmac: fix setting of driver data in stmmac_dvr_probe sched: cls_flow: fix panic on filter replace sched: cls_flower: fix panic on filter replace sched: cls_bpf: fix panic on filter replace net/mdio: fix mdio_bus_match for c45 PHY net: ratelimit warnings about dst entry refcount underflow or overflow caif: fix leaks and race in caif_queue_rcv_skb() qmi_wwan: add the second QMI/network interface for Sierra Wireless MC7305/MC7355 ravb: fix race updating TCCR ... -
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull ARM64 fixes from Catalin Marinas: - arm64 build fix following the move of the thread_struct to the end of task_struct and the asm offsets becoming too large for the AArch64 ISA - preparatory patch for moving irq_data struct members (applied now to reduce dependency for the next merging window) * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: ARM64/irq: Use access helper irq_data_get_affinity_mask() arm64: switch_to: calculate cpu context pointer using separate register
-
Jiang Liu authored
This is a preparatory patch for moving irq_data struct members. Signed-off-by:
Jiang Liu <jiang.liu@linux.intel.com> Reviewed-by:
Hanjun Guo <hanjun.guo@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com>
-
Will Deacon authored
Commit 0c8c0f03 ("x86/fpu, sched: Dynamically allocate 'struct fpu'") moved the thread_struct to the bottom of task_struct. As a result, the offset is now too large to be used in an immediate add on arm64 with some kernel configs: arch/arm64/kernel/entry.S: Assembler messages: arch/arm64/kernel/entry.S:588: Error: immediate out of range arch/arm64/kernel/entry.S:597: Error: immediate out of range This patch calculates the offset using an additional register instead of an immediate offset. Fixes: 0c8c0f03 ("x86/fpu, sched: Dynamically allocate 'struct fpu'") Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Olof Johansson <olof@lixom.net> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
