- 24 Oct, 2022 1 commit
-
-
Lijo Lazar authored
MMHUB 2.1.x versions don't have ATCL2. Remove accesses to ATCL2 registers. Since they are non-existing registers, read access will cause a 'Completer Abort' and gets reported when AER is enabled with the below patch. Tagging with the patch so that this is backported along with it. v2: squash in uninitialized warning fix (Nathan Chancellor) Fixes: 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 21 Oct, 2022 3 commits
-
-
Yiqing Yao authored
[why] MES response time in sriov may be longer than default value due to reset or init in other VF. A timeout value specific to sriov is needed. [how] When in sriov, adjust the timeout value to calculated worst case scenario. Signed-off-by:
Yiqing Yao <yiqing.yao@amd.com> Reviewed-by:
-
Kenneth Feng authored
update driver-if header for smu_v13_0_10 and merge with smu_v13_0_0 Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Chengming Gui authored
[WHY] 0, original pstate X 1, ctx_A_create -> ctx_A->stable_pstate = X 2, ctx_A_set_pstate (Y) -> current pstate is Y (PEAK or STANDARD) 3, ctx_B_create -> ctx_B->stable_pstate = Y 4, ctx_A_destroy -> restore pstate to X 5, ctx_B_destroy -> restore pstate to Y Above sequence will cause final pstate is wrong (Y), should be original X. [HOW] When ctx_B create, if ctx_A touched pstate setting (not auto, stable_pstate_ctx != NULL), set ctx_B->stable_pstate the same value as ctx_A saved, if stable_pstate_ctx == NULL, fetch current pstate to fill ctx_B->stable_pstate. Signed-off-by:
Chengming Gui <Jack.Gui@amd.com> Reviewed-by:
-
- 20 Oct, 2022 10 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-fixes for v6.1-rc2: - Fix a buffer overflow in format_helper_test. - Set DDC pointer in drmm_connector_init. - Compiler fixes for panfrost. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c4d05683-8ebe-93b8-d24c-d1d2c68f12c4@linux.intel.com
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-6.1-2022-10-20' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.1-2022-10-20: amdgpu: - Fix gfx9 APU regression caused by PCI AER fix Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-6.1-2022-10-19' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.1-2022-10-19: amdgpu: - Mode2 reset fixes for Sienna Cichlid - Revert broken fan speed sensor fix - SMU 13.x fixes - GC 11.x fixes - RAS fixes - SR-IOV fixes - Fix BO move breakage on SI - Misc compiler fixes Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Short summary of fixes pull: * vc4: HDMI fixes Signed-off-by:
-
Alex Deucher authored
Commit 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") uncovered a bug in amdgpu that required a reordering of the driver init sequence to avoid accessing a special register on the GPU before it was properly set up leading to an PCI AER error. This reordering uncovered a different hw programming ordering dependency in some APUs where the SDMA doorbells need to be programmed before the GFX doorbells. To fix this, move the SDMA doorbell programming back into the soc15 common code, but use the actual doorbell range values directly rather than the values stored in the ring structure since those will not be initialized at this point. This is a partial revert, but with the doorbell assignment fixed so the proper doorbell index is set before it's used. Fixes: e3163bc8 ("drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega") Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Steven Price authored
__le32 and __le64 types aren't portable and are not available on FreeBSD (which uses the same uAPI). Instead of attempting to always output little endian, just use native endianness in the dumps. Tools can detect the endianness in use by looking at the 'magic' field, but equally we don't expect big-endian to be used with Mali (there are no known implementations out there). Bug: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7252 Fixes: 730c2bf4 ("drm/panfrost: Add support for devcoredump") Reviewed-by:
Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Signed-off-by:
Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017104602.142992-3-steven.price@arm.com
-
Steven Price authored
The two structs internal to struct panfrost_dump_object_header were named, but sadly that is incompatible with C++, causing an error: "an anonymous union may only have public non-static data members". However nothing refers to struct pan_reg_hdr and struct pan_bomap_hdr and there's no need to export these definitions, so lets drop them. This fixes the C++ build error with the minimum change in userspace API. Reported-by:
Adrián Larumbe <adrian.larumbe@collabora.com> Fixes: 730c2bf4 ("drm/panfrost: Add support for devcoredump") Reviewed-by:
-
Maxime Ripard authored
Commit 35a3b82f ("drm/connector: Introduce drmm_connector_init") introduced the function drmm_connector_init() with a parameter for an optional ddc pointer to the i2c controller used to access the DDC bus. However, the underlying call to __drm_connector_init() was always setting it to NULL instead of passing the ddc argument around. This resulted in unexpected null pointer dereference on platforms expecting to get a DDC controller. Fixes: 35a3b82f ("drm/connector: Introduce drmm_connector_init") Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20221019143442.1798964-1-maxime@cerno.techSigned-off-by:
Maxime Ripard <maxime@cerno.tech>
-
David Gow authored
The xrgb2101010 format conversion test (unlike for other formats) does an endianness conversion on the results. However, it always converts TEST_BUF_SIZE 32-bit integers, which results in reading from (and writing to) more memory than in present in the result buffer. Instead, use the buffer size, divided by sizeof(u32). The issue could be reproduced with KASAN: ./tools/testing/kunit/kunit.py run --kunitconfig drivers/gpu/drm/tests \ --kconfig_add CONFIG_KASAN=y --kconfig_add CONFIG_KASAN_VMALLOC=y \ --kconfig_add CONFIG_KASAN_KUNIT_TEST=y \ drm_format_helper_test.*xrgb2101010 Reported-by:
Linux Kernel Functional Testing <lkft@linaro.org> Fixes: 45311431 ("drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_xrgb2101010()") Signed-off-by:
David Gow <davidgow@google.com> Reviewed-by:
Maíra Canal <mairacanal@riseup.net> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
José Expósito <jose.exposito89@gmail.com> Signed-off-by:
-
Thomas Zimmermann authored
Backmerging to get v6.1-rc1. Signed-off-by:
-
- 19 Oct, 2022 26 commits
-
-
Christian König authored
Make sure that we always have a CPU round trip to let the submission code correctly decide if a TLB flush is necessary or not. Signed-off-by:
Luben Tuikov <luben.tuikov@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014081553.114899-2-christian.koenig@amd.com
-
Christian König authored
Setting this flag on a scheduler fence prevents pipelining of jobs depending on this fence. In other words we always insert a full CPU round trip before dependent jobs are pushed to the pipeline. Signed-off-by:
-
Arunpravin Paneer Selvam authored
A user reported a bug on CAPE VERDE system where uvd_v3_1 IP component failed to initialize as there is an issue with BO move code from one memory to other. In function amdgpu_mem_visible() called by amdgpu_bo_move(), when there are no blocks to compare or if we have a single block then break the loop. Fixes: 312b4dc1 ("drm/amdgpu: Fix VRAM BO swap issue") Signed-off-by:
Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Reviewed-by:
-
YuBiao Wang authored
[Why] If mes is not dequeued during fini, mes will be in an uncleaned state during reload, then mes couldn't receive some commands which leads to reload failure. [How] Perform MES dequeue via MMIO after all the unmap jobs are done by mes and before kiq fini. v2: Move the dequeue operation inside kiq_hw_fini. Signed-off-by:
YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by:
Jack Xiao <Jack.Xiao@amd.com> Signed-off-by:
-
Kenneth Feng authored
enable thermal alert on smu_v13_0_10 Signed-off-by:
-
Yifan Zha authored
[Why] L1 blocks most of GC registers accessing by MMIO. [How] Use RLCG interface to program GC registers under SRIOV VF in full access time. Signed-off-by:
Yifan Zha <Yifan.Zha@amd.com> Reviewed-by:
-
Nathan Chancellor authored
When booting a kernel compiled with CONFIG_CFI_CLANG on a machine with an RX 6700 XT, there is a CFI failure in kfd_destroy_mqd_cp(): [ 12.894543] CFI failure at kfd_destroy_mqd_cp+0x2a/0x40 [amdgpu] (target: hqd_destroy_v10_3+0x0/0x260 [amdgpu]; expected type: 0x8594d794) Clang's kernel Control Flow Integrity (kCFI) makes sure that all indirect call targets have a type that exactly matches the function pointer prototype. In this case, hqd_destroy()'s third parameter, reset_type, should have a type of 'uint32_t' but every implementation of this callback has a third parameter type of 'enum kfd_preempt_type'. Update the function pointer prototype to match reality so that there is no more CFI violation. Link: https://github.com/ClangBuiltLinux/linux/issues/1738Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
Guenter Roeck authored
Building 32-bit images may fail with the following error. drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c: In function ‘dml32_UseMinimumDCFCLK’: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:3142:1: error: the frame size of 1096 bytes is larger than 1024 bytes This is seen when building i386:allmodconfig with any of the following compilers. gcc (Debian 12.2.0-3) 12.2.0 gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0 The problem is not seen if the compiler supports GCC_PLUGIN_LATENT_ENTROPY because in that case CONFIG_FRAME_WARN is already set to 2048 even for 32-bit builds. dml32_UseMinimumDCFCLK() was introduced with commit dda4fb85 ("drm/amd/display: DML changes for DCN32/321"). It declares a large number of local variables. Increase the frame size for the affected file to 2048, similar to other files in the same directory, to enable 32-bit build tests with affected compilers. Fixes: dda4fb85 ("drm/amd/display: DML changes for DCN32/321") Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reported-by:
Łukasz Bartosik <ukaszb@google.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Tim Huang authored
The pmfw has changed the driver interface version, so keep same with the fw. Signed-off-by:
Tim Huang <tim.huang@amd.com> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
-
Tim Huang authored
Update the SMU driver interface version to V7. Signed-off-by:
-
ZhenGuo Yin authored
[Why] In SRIOV multi-vf, dpm is always disabled, and pm_attr_list won't be initialized. There will be a NULL pointer call trace after removing the dpm check condition in amdgpu_pm_sysfs_fini. BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:amdgpu_device_attr_remove_groups+0x20/0x90 [amdgpu] Call Trace: <TASK> amdgpu_pm_sysfs_fini+0x2f/0x40 [amdgpu] amdgpu_device_fini_hw+0xdf/0x290 [amdgpu] [How] List pm_attr_list should be initialized when dpm is disabled. Fixes: a6ad27ce ("drm/amd/pm: Remove redundant check condition") Signed-off-by:
ZhenGuo Yin <zhenguo.yin@amd.com> Reviewed-by:
-
Evan Quan authored
Suggested by PMFW team and same as what did for gfxoff feature. This can address some Mode1Reset failures observed on SMU13.0.0. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
Evan Quan authored
Fulfill the functionality for cstate control. Signed-off-by:
-
Evan Quan authored
Fulfill the functionality for cstate control. Signed-off-by:
-
YiPeng Chai authored
V2: Add sriov vf ras support in amdgpu_ras_asic_supported. Signed-off-by:
YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by:
-
YiPeng Chai authored
V1: Enable ras support for CHIP_IP_DISCOVERY asic type. V2: 1. Change commit comment. 2. Enable ras support for mp0 v13_0_0 and v13_0_10. Signed-off-by:
-
YiPeng Chai authored
Enable gmc soft reset on gmc_v11_0_3. Signed-off-by:
-
Likun Gao authored
Temporary disable mes self teset for gc 11.0.3. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
-
Kenneth Feng authored
skip loading pptable from driver on secure board since it's loaded from psp. Signed-off-by:
Guan Yu <Guan.Yu@amd.com> Signed-off-by:
-
Kenneth Feng authored
enable gfx clock gating features on smu_v13_0_10 Signed-off-by:
-
Kenneth Feng authored
remove the pptable id override on smu_v13_0_10, and the id is fetched from vbios now. Signed-off-by:
-
Kenneth Feng authored
temporarily disable thermal alert on smu_v13_0_10 due to kfd test fail. will enable it again after confirming the thermal hardware setting. Signed-off-by:
-
Asher Song authored
This reverts commit 16fb4dca. Unfortunately, that commit causes fan monitors can't be read and written properly. Fixes: 16fb4dca ("drm/amdgpu: getting fan speed pwm for vega10 properly") Signed-off-by:
Asher Song <Asher.Song@amd.com> Reviewed-by:
-
Victor Zhao authored
- refactor mode2 on v11.0.7 to align with aldebaran - comment out using mode2 reset as default for now, will introduce another controller to replace previous reset_level_mask v2: squash in unused variable removal (Alex) Signed-off-by:
Victor Zhao <Victor.Zhao@amd.com> Reviewed-by:
-
Victor Zhao authored
This reverts commit dac6b808. This commit reverted the AMDGPU_SKIP_MODE2_RESET as it conflicts with the original design of reset handler. Will redesign it. Fixes: dac6b808 ("drm/amdgpu: let mode2 reset fallback to default when failure") Signed-off-by:
-
Victor Zhao authored
This reverts commit 5bd8d53f. This commit breaks the reset logic for aldebaran, revert it for now. Will move the mask inside the reset handler. Fixes: 5bd8d53f ("drm/amdgpu: add debugfs amdgpu_reset_level") Signed-off-by:
-
