- 01 Oct, 2019 18 commits
-
-
Wen Yang authored
of_node_put needs to be called when the device node which is got from of_get_child_by_name finished using. In both cases of success and failure, we need to release 'ports', so clean up the code using goto. fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Signed-off-by:
Wen Yang <wenyang@linux.alibaba.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
As explained in the "net: sched: taprio: Avoid division by zero on invalid link speed" commit, it is legal for the ethtool API to return zero as a link speed. So guard against it to ensure we don't perform a division by zero in kernel. Fixes: e0a7683d ("net/sched: cbs: fix port_rate miscalculation") Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Acked-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by:
-
Vladimir Oltean authored
The check in taprio_set_picos_per_byte is currently not robust enough and will trigger this division by zero, due to e.g. PHYLINK not setting kset->base.speed when there is no PHY connected: [ 27.109992] Division by zero in kernel. [ 27.113842] CPU: 1 PID: 198 Comm: tc Not tainted 5.3.0-rc5-01246-gc4006b8c2637-dirty #212 [ 27.121974] Hardware name: Freescale LS1021A [ 27.126234] [<c03132e0>] (unwind_backtrace) from [<c030d8b8>] (show_stack+0x10/0x14) [ 27.133938] [<c030d8b8>] (show_stack) from [<c10b21b0>] (dump_stack+0xb0/0xc4) [ 27.141124] [<c10b21b0>] (dump_stack) from [<c10af97c>] (Ldiv0_64+0x8/0x18) [ 27.148052] [<c10af97c>] (Ldiv0_64) from [<c0700260>] (div64_u64+0xcc/0xf0) [ 27.154978] [<c0700260>] (div64_u64) from [<c07002d0>] (div64_s64+0x4c/0x68) [ 27.161993] [<c07002d0>] (div64_s64) from [<c0f3d890>] (taprio_set_picos_per_byte+0xe8/0xf4) [ 27.170388] [<c0f3d890>] (taprio_set_picos_per_byte) from [<c0f3f614>] (taprio_change+0x668/0xcec) [ 27.179302] [<c0f3f614>] (taprio_change) from [<c0f2bc24>] (qdisc_create+0x1fc/0x4f4) [ 27.187091] [<c0f2bc24>] (qdisc_create) from [<c0f2c0c8>] (tc_modify_qdisc+0x1ac/0x6f8) [ 27.195055] [<c0f2c0c8>] (tc_modify_qdisc) from [<c0ee9604>] (rtnetlink_rcv_msg+0x268/0x2dc) [ 27.203449] [<c0ee9604>] (rtnetlink_rcv_msg) from [<c0f4fef0>] (netlink_rcv_skb+0xe0/0x114) [ 27.211756] [<c0f4fef0>] (netlink_rcv_skb) from [<c0f4f6cc>] (netlink_unicast+0x1b4/0x22c) [ 27.219977] [<c0f4f6cc>] (netlink_unicast) from [<c0f4fa84>] (netlink_sendmsg+0x284/0x340) [ 27.228198] [<c0f4fa84>] (netlink_sendmsg) from [<c0eae5fc>] (sock_sendmsg+0x14/0x24) [ 27.235988] [<c0eae5fc>] (sock_sendmsg) from [<c0eaedf8>] (___sys_sendmsg+0x214/0x228) [ 27.243863] [<c0eaedf8>] (___sys_sendmsg) from [<c0eb015c>] (__sys_sendmsg+0x50/0x8c) [ 27.251652] [<c0eb015c>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54) [ 27.259524] Exception stack(0xe8045fa8 to 0xe8045ff0) [ 27.264546] 5fa0: b6f608c8 000000f8 00000003 bed7e2f0 00000000 00000000 [ 27.272681] 5fc0: b6f608c8 000000f8 004ce54c 00000128 5d3ce8c7 00000000 00000026 00505c9c [ 27.280812] 5fe0: 00000070 bed7e298 004ddd64 b6dd1e64 Russell King points out that the ethtool API says zero is a valid return value of __ethtool_get_link_ksettings: * If it is enabled then they are read-only; if the link * is up they represent the negotiated link mode; if the link is down, * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode. So, it seems that taprio is not following the API... I'd suggest either fixing taprio, or getting agreement to change the ethtool API. The chosen path was to fix taprio. Fixes: 7b9eba7b ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2019-10-01' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A small list of fixes this time: * two null pointer dereference fixes * a fix for preempt-enabled/BHs-enabled (lockdep) splats (that correctly pointed out a bug) * a fix for multi-BSSID ordering assumptions * a fix for the EDMG support, on-stack chandefs need to be initialized properly (now that they're bigger) * beacon (head) data from userspace should be validated ==================== Signed-off-by:
-
Arnd Bergmann authored
When no other driver selects the devlink library code, ionic produces a link failure: drivers/net/ethernet/pensando/ionic/ionic_devlink.o: In function `ionic_devlink_alloc': ionic_devlink.c:(.text+0xd): undefined reference to `devlink_alloc' drivers/net/ethernet/pensando/ionic/ionic_devlink.o: In function `ionic_devlink_register': ionic_devlink.c:(.text+0x71): undefined reference to `devlink_register' Add the same 'select' statement that the other drivers use here. Fixes: fbfb8031 ("ionic: Add hardware init and device commands") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Adam Zerella authored
Resolving a couple of Sphinx documentation warnings that are generated in the networking section. - WARNING: document isn't included in any toctree - WARNING: Title underline too short. Signed-off-by:
Adam Zerella <adam.zerella@gmail.com> Signed-off-by:
-
Lorenzo Bianconi authored
Always acquire tx descriptor spinlock even if a xdp program is not loaded on the netsec device since ndo_xdp_xmit can run concurrently with netsec_netdev_start_xmit and netsec_clean_tx_dring. This can happen loading a xdp program on a different device (e.g virtio-net) and xdp_do_redirect_map/xdp_do_redirect_slow can redirect to netsec even if we do not have a xdp program on it. Fixes: ba2b2321 ("net: netsec: add XDP support") Tested-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Johannes Berg authored
Drivers typically expect this, as it's the case for almost all cases where this is called (i.e. from the TX path). Also, the code in mac80211 itself (if the driver calls ieee80211_tx_dequeue()) expects this as it uses this_cpu_ptr() without additional protection. This should fix various reports of the problem: https://bugzilla.kernel.org/show_bug.cgi?id=204127 https://lore.kernel.org/linux-wireless/CAN5HydrWb3o_FE6A1XDnP1E+xS66d5kiEuhHfiGKkLNQokx13Q@mail.gmail.com/ https://lore.kernel.org/lkml/nycvar.YFH.7.76.1909111238470.473@cbobk.fhfr.pm/ Cc: stable@vger.kernel.org Reported-and-tested-by:
Jiri Kosina <jkosina@suse.cz> Reported-by:
Aaron Hill <aa1ronham@gmail.com> Reported-by:
Lukas Redlinger <rel+kernel@agilox.net> Reported-by:
Oleksii Shevchuk <alxchk@gmail.com> Fixes: 21a5d4c3 ("mac80211: add stop/start logic for software TXQs") Link: https://lore.kernel.org/r/1569928763-I3e8838c5ecad878e59d4a94eb069a90f6641461a@changeidReviewed-by:
Johannes Berg <johannes.berg@intel.com>
-
Miaoqing Pan authored
If the interface type is P2P_DEVICE or NAN, read the file of '/sys/kernel/debug/ieee80211/phyx/netdev:wlanx/aqm' will get a NULL pointer dereference. As for those interface type, the pointer sdata->vif.txq is NULL. Unable to handle kernel NULL pointer dereference at virtual address 00000011 CPU: 1 PID: 30936 Comm: cat Not tainted 4.14.104 #1 task: ffffffc0337e4880 task.stack: ffffff800cd20000 PC is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] LR is at ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] [...] Process cat (pid: 30936, stack limit = 0xffffff800cd20000) [...] [<ffffff8000b7cd00>] ieee80211_if_fmt_aqm+0x34/0xa0 [mac80211] [<ffffff8000b7c414>] ieee80211_if_read+0x60/0xbc [mac80211] [<ffffff8000b7ccc4>] ieee80211_if_read_aqm+0x28/0x30 [mac80211] [<ffffff80082eff94>] full_proxy_read+0x2c/0x48 [<ffffff80081eef00>] __vfs_read+0x2c/0xd4 [<ffffff80081ef084>] vfs_read+0x8c/0x108 [<ffffff80081ef494>] SyS_read+0x40/0x7c Signed-off-by:
Miaoqing Pan <miaoqing@codeaurora.org> Acked-by:
-
Miaoqing Pan authored
If the interface is not in MESH mode, the command 'iw wlanx mpath del' will cause kernel panic. The root cause is null pointer access in mpp_flush_by_proxy(), as the pointer 'sdata->u.mesh.mpp_paths' is NULL for non MESH interface. Unable to handle kernel NULL pointer dereference at virtual address 00000068 [...] PC is at _raw_spin_lock_bh+0x20/0x5c LR is at mesh_path_del+0x1c/0x17c [mac80211] [...] Process iw (pid: 4537, stack limit = 0xd83e0238) [...] [<c021211c>] (_raw_spin_lock_bh) from [<bf8c7648>] (mesh_path_del+0x1c/0x17c [mac80211]) [<bf8c7648>] (mesh_path_del [mac80211]) from [<bf6cdb7c>] (extack_doit+0x20/0x68 [compat]) [<bf6cdb7c>] (extack_doit [compat]) from [<c05c309c>] (genl_rcv_msg+0x274/0x30c) [<c05c309c>] (genl_rcv_msg) from [<c05c25d8>] (netlink_rcv_skb+0x58/0xac) [<c05c25d8>] (netlink_rcv_skb) from [<c05c2e14>] (genl_rcv+0x20/0x34) [<c05c2e14>] (genl_rcv) from [<c05c1f90>] (netlink_unicast+0x11c/0x204) [<c05c1f90>] (netlink_unicast) from [<c05c2420>] (netlink_sendmsg+0x30c/0x370) [<c05c2420>] (netlink_sendmsg) from [<c05886d0>] (sock_sendmsg+0x70/0x84) [<c05886d0>] (sock_sendmsg) from [<c0589f4c>] (___sys_sendmsg.part.3+0x188/0x228) [<c0589f4c>] (___sys_sendmsg.part.3) from [<c058add4>] (__sys_sendmsg+0x4c/0x70) [<c058add4>] (__sys_sendmsg) from [<c0208c80>] (ret_fast_syscall+0x0/0x44) Code: e2822c02 e2822001 e5832004 f590f000 (e1902f9f) ---[ end trace bbd717600f8f884d ]--- Signed-off-by:
-
Johannes Berg authored
In a few places we don't properly initialize on-stack chandefs, resulting in EDMG data to be non-zero, which broke things. Additionally, in a few places we rely on the driver to init the data completely, but perhaps we shouldn't as non-EDMG drivers may not initialize the EDMG data, also initialize it there. Cc: stable@vger.kernel.org Fixes: 2a38075c ("nl80211: Add support for EDMG channels") Reported-by:
Dmitry Osipenko <digetx@gmail.com> Tested-by:
-
Johannes Berg authored
The code copying the data assumes that the SSID element is before the MBSSID element, but since the data is untrusted from the AP, this cannot be guaranteed. Validate that this is indeed the case and ignore the MBSSID otherwise, to avoid having to deal with both cases for the copy of data that should be between them. Cc: stable@vger.kernel.org Fixes: 0b8fb823 ("cfg80211: Parsing of Multiple BSSID information in scanning") Link: https://lore.kernel.org/r/1569009255-I1673911f5eae02964e21bdc11b2bf58e5e207e59@changeidSigned-off-by:
-
Johannes Berg authored
We currently don't validate the beacon head, i.e. the header, fixed part and elements that are to go in front of the TIM element. This means that the variable elements there can be malformed, e.g. have a length exceeding the buffer size, but most downstream code from this assumes that this has already been checked. Add the necessary checks to the netlink policy. Cc: stable@vger.kernel.org Fixes: ed1b6cc7 ("cfg80211/nl80211: add beacon settings") Link: https://lore.kernel.org/r/1569009255-I7ac7fbe9436e9d8733439eab8acbbd35e55c74ef@changeidSigned-off-by:
-
Vladimir Oltean authored
The speed divisor is used in a context expecting an s64, but it is evaluated using 32-bit arithmetic. To avoid that happening, instead of multiplying by 1,000,000 in the first place, simplify the fraction and do a standard 32 bit division instead. Fixes: f04b514c ("taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte") Reported-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Navid Emamdoost authored
In sja1105_static_config_upload, in two cases memory is leaked: when static_config_buf_prepare_for_upload fails and when sja1105_inhibit_tx fails. In both cases config_buf should be released. Fixes: 8aa9ebcc ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Fixes: 1a4c6940 ("net: dsa: sja1105: Prevent PHY jabbering during switch reset") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Sometimes the PTP synchronization on the switch 'jumps': ptp4l[11241.155]: rms 8 max 16 freq -21732 +/- 11 delay 742 +/- 0 ptp4l[11243.157]: rms 7 max 17 freq -21731 +/- 10 delay 744 +/- 0 ptp4l[11245.160]: rms 33592410 max 134217731 freq +192422 +/- 8530253 delay 743 +/- 0 ptp4l[11247.163]: rms 811631 max 964131 freq +10326 +/- 557785 delay 743 +/- 0 ptp4l[11249.166]: rms 261936 max 533876 freq -304323 +/- 126371 delay 744 +/- 0 ptp4l[11251.169]: rms 48700 max 57740 freq -20218 +/- 30532 delay 744 +/- 0 ptp4l[11253.171]: rms 14570 max 30163 freq -5568 +/- 7563 delay 742 +/- 0 ptp4l[11255.174]: rms 2914 max 3440 freq -22001 +/- 1667 delay 744 +/- 1 ptp4l[11257.177]: rms 811 max 1710 freq -22653 +/- 451 delay 744 +/- 1 ptp4l[11259.180]: rms 177 max 218 freq -21695 +/- 89 delay 741 +/- 0 ptp4l[11261.182]: rms 45 max 92 freq -21677 +/- 32 delay 742 +/- 0 ptp4l[11263.186]: rms 14 max 32 freq -21733 +/- 11 delay 742 +/- 0 ptp4l[11265.188]: rms 9 max 14 freq -21725 +/- 12 delay 742 +/- 0 ptp4l[11267.191]: rms 9 max 16 freq -21727 +/- 13 delay 742 +/- 0 ptp4l[11269.194]: rms 6 max 15 freq -21726 +/- 9 delay 743 +/- 0 ptp4l[11271.197]: rms 8 max 15 freq -21728 +/- 11 delay 743 +/- 0 ptp4l[11273.200]: rms 6 max 12 freq -21727 +/- 8 delay 743 +/- 0 ptp4l[11275.202]: rms 9 max 17 freq -21720 +/- 11 delay 742 +/- 0 ptp4l[11277.205]: rms 9 max 18 freq -21725 +/- 12 delay 742 +/- 0 Background: the switch only offers partial RX timestamps (24 bits) and it is up to the driver to read the PTP clock to fill those timestamps up to 64 bits. But the PTP clock readout needs to happen quickly enough (in 0.135 seconds, in fact), otherwise the PTP clock will wrap around 24 bits, condition which cannot be detected. Looking at the 'max 134217731' value on output line 3, one can see that in hex it is 0x8000003. Because the PTP clock resolution is 8 ns, that means 0x1000000 in ticks, which is exactly 2^24. So indeed this is a PTP clock wraparound, but the reason might be surprising. What is going on is that sja1105_tstamp_reconstruct(priv, now, ts) expects a "now" time that is later than the "ts" was snapshotted at. This, of course, is obvious: we read the PTP time _after_ the partial RX timestamp was received. However, the workqueue is processing frames from a skb queue and reuses the same PTP time, read once at the beginning. Normally the skb queue only contains one frame and all goes well. But when the skb queue contains two frames, the second frame that gets dequeued might have been partially timestamped by the RX MAC _after_ we had read our PTP time initially. The code was originally like that due to concerns that SPI access for PTP time readout is a slow process, and we are time-constrained anyway (aka: premature optimization). But some timing analysis reveals that the time spent until the RX timestamp is completely reconstructed is 1 order of magnitude lower than the 0.135 s deadline even under worst-case conditions. So we can afford to read the PTP time for each frame in the RX timestamping queue, which of course ensures that the full PTP time is in the partial timestamp's future. Fixes: f3097be2 ("net: dsa: sja1105: Add a state machine for RX timestamping") Signed-off-by:
-
David S. Miller authored
Merge tag 'ieee802154-for-davem-2019-09-28' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2019-09-28 An update from ieee802154 for your *net* tree. Three driver fixes. Navid Emamdoost fixed a memory leak on an error path in the ca8210 driver, Johan Hovold fixed a use-after-free found by syzbot in the atusb driver and Christophe JAILLET makes sure __skb_put_data is used instead of memcpy in the mcr20a driver I switched from branches to tags here to be pulled from. So far not annotated and not signed. Once I fixed my scripts it should contain this messages as annotations. If you want it signed as well just tell me. If there are any problems let me know. ==================== Signed-off-by:
-
Martin KaFai Lau authored
The "reuse->sock[]" array is shared by multiple sockets. The going away sk must unpublish itself from "reuse->sock[]" before making call_rcu() call. However, this unpublish-action is currently done after a grace period and it may cause use-after-free. The fix is to move reuseport_detach_sock() to sk_destruct(). Due to the above reason, any socket with sk_reuseport_cb has to go through the rcu grace period before freeing it. It is a rather old bug (~3 yrs). The Fixes tag is not necessary the right commit but it is the one that introduced the SOCK_RCU_FREE logic and this fix is depending on it. Fixes: a4298e45 ("net: add SOCK_RCU_FREE socket flag") Cc: Eric Dumazet <eric.dumazet@gmail.com> Suggested-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
- 30 Sep, 2019 3 commits
-
-
Haishuang Yan authored
erspan driver calls ether_setup(), after commit 61e84623 ("net: centralize net_device min/max MTU checking"), the range of mtu is [min_mtu, max_mtu], which is [68, 1500] by default. It causes the dev mtu of the erspan device to not be greater than 1500, this limit value is not correct for ipgre tap device. Tested: Before patch: # ip link set erspan0 mtu 1600 Error: mtu greater than device maximum. After patch: # ip link set erspan0 mtu 1600 # ip -d link show erspan0 21: erspan0@NONE: <BROADCAST,MULTICAST> mtu 1600 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 0 Fixes: 61e84623 ("net: centralize net_device min/max MTU checking") Signed-off-by:
Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by:
-
Eric Dumazet authored
syzbot reported a crash in cbq_normalize_quanta() caused by an out of range cl->priority. iproute2 enforces this check, but malicious users do not. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI Modules linked in: CPU: 1 PID: 26447 Comm: syz-executor.1 Not tainted 5.3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:cbq_normalize_quanta.part.0+0x1fd/0x430 net/sched/sch_cbq.c:902 RSP: 0018:ffff8801a5c333b0 EFLAGS: 00010206 RAX: 0000000020000003 RBX: 00000000fffffff8 RCX: ffffc9000712f000 RDX: 00000000000043bf RSI: ffffffff83be8962 RDI: 0000000100000018 RBP: ffff8801a5c33420 R08: 000000000000003a R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 00000000000002ef R13: ffff88018da95188 R14: dffffc0000000000 R15: 0000000000000015 FS: 00007f37d26b1700(0000) GS:ffff8801dad00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004c7cec CR3: 00000001bcd0a006 CR4: 00000000001626f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [<ffffffff83be9d57>] cbq_normalize_quanta include/net/pkt_sched.h:27 [inline] [<ffffffff83be9d57>] cbq_addprio net/sched/sch_cbq.c:1097 [inline] [<ffffffff83be9d57>] cbq_set_wrr+0x2d7/0x450 net/sched/sch_cbq.c:1115 [<ffffffff83bee8a7>] cbq_change_class+0x987/0x225b net/sched/sch_cbq.c:1537 [<ffffffff83b96985>] tc_ctl_tclass+0x555/0xcd0 net/sched/sch_api.c:2329 [<ffffffff83a84655>] rtnetlink_rcv_msg+0x485/0xc10 net/core/rtnetlink.c:5248 [<ffffffff83cadf0a>] netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2510 [<ffffffff83a7db6d>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5266 [<ffffffff83cac2c6>] netlink_unicast_kernel net/netlink/af_netlink.c:1324 [inline] [<ffffffff83cac2c6>] netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1350 [<ffffffff83cacd4a>] netlink_sendmsg+0x89a/0xd50 net/netlink/af_netlink.c:1939 [<ffffffff8399d46e>] sock_sendmsg_nosec net/socket.c:673 [inline] [<ffffffff8399d46e>] sock_sendmsg+0x12e/0x170 net/socket.c:684 [<ffffffff8399f1fd>] ___sys_sendmsg+0x81d/0x960 net/socket.c:2359 [<ffffffff839a2d05>] __sys_sendmsg+0x105/0x1d0 net/socket.c:2397 [<ffffffff839a2df9>] SYSC_sendmsg net/socket.c:2406 [inline] [<ffffffff839a2df9>] SyS_sendmsg+0x29/0x30 net/socket.c:2404 [<ffffffff8101ccc8>] do_syscall_64+0x528/0x770 arch/x86/entry/common.c:305 [<ffffffff84400091>] entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Michal Vokáč authored
The QCA8K family supports up to 7 ports. So use the existing QCA8K_NUM_PORTS define to allocate the switch structure and limit all operations with the switch ports. This was not an issue until commit 0394a63a ("net: dsa: enable and disable all ports") disabled all unused ports. Since the unused ports 7-11 are outside of the correct register range on this switch some registers were rewritten with invalid content. Fixes: 6b93fb46 ("net-next: dsa: add new driver for qca8xxx family") Fixes: a0c02161 ("net: dsa: variable number of ports") Fixes: 0394a63a ("net: dsa: enable and disable all ports") Signed-off-by:
Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
- 29 Sep, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Sanity check URB networking device parameters to avoid divide by zero, from Oliver Neukum. 2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6 don't work properly. Longer term this needs a better fix tho. From Vijay Khemka. 3) Small fixes to selftests (use ping when ping6 is not present, etc.) from David Ahern. 4) Bring back rt_uses_gateway member of struct rtable, it's semantics were not well understood and trying to remove it broke things. From David Ahern. 5) Move usbnet snaity checking, ignore endpoints with invalid wMaxPacketSize. From Bjørn Mork. 6) Missing Kconfig deps for sja1105 driver, from Mao Wenan. 7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel, Alex Vesker, and Yevgeny Kliteynik 8) Missing CAP_NET_RAW checks in various places, from Ori Nimron. 9) Fix crash when removing sch_cbs entry while offloading is enabled, from Vinicius Costa Gomes. 10) Signedness bug fixes, generally in looking at the result given by of_get_phy_mode() and friends. From Dan Crapenter. 11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet. 12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern. 13) Fix quantization code in tcp_bbr, from Kevin Yang. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits) net: tap: clean up an indentation issue nfp: abm: fix memory leak in nfp_abm_u32_knode_replace tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state sk_buff: drop all skb extensions on free and skb scrubbing tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions Documentation: Clarify trap's description mlxsw: spectrum: Clear VLAN filters during port initialization net: ena: clean up indentation issue NFC: st95hf: clean up indentation issue net: phy: micrel: add Asym Pause workaround for KSZ9021 net: socionext: ave: Avoid using netdev_err() before calling register_netdev() ptp: correctly disable flags on old ioctls lib: dimlib: fix help text typos net: dsa: microchip: Always set regmap stride to 1 nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled net: sched: sch_sfb: don't call qdisc_put() while holding tree lock ...
-
- 28 Sep, 2019 11 commits
-
-
Linus Torvalds authored
Merge hugepage allocation updates from David Rientjes: "We (mostly Linus, Andrea, and myself) have been discussing offlist how to implement a sane default allocation strategy for hugepages on NUMA platforms. With these reverts in place, the page allocator will happily allocate a remote hugepage immediately rather than try to make a local hugepage available. This incurs a substantial performance degradation when memory compaction would have otherwise made a local hugepage available. This series reverts those reverts and attempts to propose a more sane default allocation strategy specifically for hugepages. Andrea acknowledges this is likely to fix the swap storms that he originally reported that resulted in the patches that removed __GFP_THISNODE from hugepage allocations. The immediate goal is to return 5.3 to the behavior the kernel has implemented over the past several years so that remote hugepages are not immediately allocated when local hugepages could have been made available because the increased access latency is untenable. The next goal is to introduce a sane default allocation strategy for hugepages allocations in general regardless of the configuration of the system so that we prevent thrashing of local memory when compaction is unlikely to succeed and can prefer remote hugepages over remote native pages when the local node is low on memory." Note on timing: this reverts the hugepage VM behavior changes that got introduced fairly late in the 5.3 cycle, and that fixed a huge performance regression for certain loads that had been around since 4.18. Andrea had this note: "The regression of 4.18 was that it was taking hours to start a VM where 3.10 was only taking a few seconds, I reported all the details on lkml when it was finally tracked down in August 2018. https://lore.kernel.org/linux-mm/20180820032640.9896-2-aarcange@redhat.com/ __GFP_THISNODE in MADV_HUGEPAGE made the above enterprise vfio workload degrade like in the "current upstream" above. And it still would have been that bad as above until 5.3-rc5" where the bad behavior ends up happening as you fill up a local node, and without that change, you'd get into the nasty swap storm behavior due to compaction working overtime to make room for more memory on the nodes. As a result 5.3 got the two performance fix reverts in rc5. However, David Rientjes then noted that those performance fixes in turn regressed performance for other loads - although not quite to the same degree. He suggested reverting the reverts and instead replacing them with two small changes to how hugepage allocations are done (patch descriptions rephrased by me): - "avoid expensive reclaim when compaction may not succeed": just admit that the allocation failed when you're trying to allocate a huge-page and compaction wasn't successful. - "allow hugepage fallback to remote nodes when madvised": when that node-local huge-page allocation failed, retry without forcing the local node. but by then I judged it too late to replace the fixes for a 5.3 release. So 5.3 was released with behavior that harked back to the pre-4.18 logic. But now we're in the merge window for 5.4, and we can see if this alternate model fixes not just the horrendous swap storm behavior, but also restores the performance regression that the late reverts caused. Fingers crossed. * emailed patches from David Rientjes <rientjes@google.com>: mm, page_alloc: allow hugepage fallback to remote nodes when madvised mm, page_alloc: avoid expensive reclaim when compaction may not succeed Revert "Revert "Revert "mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask"" Revert "Revert "mm, thp: restore node-local hugepage allocations"" -
David Rientjes authored
For systems configured to always try hard to allocate transparent hugepages (thp defrag setting of "always") or for memory that has been explicitly madvised to MADV_HUGEPAGE, it is often better to fallback to remote memory to allocate the hugepage if the local allocation fails first. The point is to allow the initial call to __alloc_pages_node() to attempt to defragment local memory to make a hugepage available, if possible, rather than immediately fallback to remote memory. Local hugepages will always have a better access latency than remote (huge)pages, so an attempt to make a hugepage available locally is always preferred. If memory compaction cannot be successful locally, however, it is likely better to fallback to remote memory. This could take on two forms: either allow immediate fallback to remote memory or do per-zone watermark checks. It would be possible to fallback only when per-zone watermarks fail for order-0 memory, since that would require local reclaim for all subsequent faults so remote huge allocation is likely better than thrashing the local zone for large workloads. In this case, it is assumed that because the system is configured to try hard to allocate hugepages or the vma is advised to explicitly want to try hard for hugepages that remote allocation is better when local allocation and memory compaction have both failed. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Rientjes authored
Memory compaction has a couple significant drawbacks as the allocation order increases, specifically: - isolate_freepages() is responsible for finding free pages to use as migration targets and is implemented as a linear scan of memory starting at the end of a zone, - failing order-0 watermark checks in memory compaction does not account for how far below the watermarks the zone actually is: to enable migration, there must be *some* free memory available. Per the above, watermarks are not always suffficient if isolate_freepages() cannot find the free memory but it could require hundreds of MBs of reclaim to even reach this threshold (read: potentially very expensive reclaim with no indication compaction can be successful), and - if compaction at this order has failed recently so that it does not even run as a result of deferred compaction, looping through reclaim can often be pointless. For hugepage allocations, these are quite substantial drawbacks because these are very high order allocations (order-9 on x86) and falling back to doing reclaim can potentially be *very* expensive without any indication that compaction would even be successful. Reclaim itself is unlikely to free entire pageblocks and certainly no reliance should be put on it to do so in isolation (recall lumpy reclaim). This means we should avoid reclaim and simply fail hugepage allocation if compaction is deferred. It is also not helpful to thrash a zone by doing excessive reclaim if compaction may not be able to access that memory. If order-0 watermarks fail and the allocation order is sufficiently large, it is likely better to fail the allocation rather than thrashing the zone. Signed-off-by:
-
David Rientjes authored
This reverts commit 92717d42. Since commit a8282608 ("Revert "mm, thp: restore node-local hugepage allocations"") is reverted in this series, it is better to restore the previous 5.2 behavior between the thp allocation and the page allocator rather than to attempt any consolidation or cleanup for a policy that is now reverted. It's less risky during an rc cycle and subsequent patches in this series further modify the same policy that the pre-5.3 behavior implements. Consolidation and cleanup can be done subsequent to a sane default page allocation strategy, so this patch reverts a cleanup done on a strategy that is now reverted and thus is the least risky option. Signed-off-by:
-
David Rientjes authored
This reverts commit a8282608. The commit references the original intended semantic for MADV_HUGEPAGE which has subsequently taken on three unique purposes: - enables or disables thp for a range of memory depending on the system's config (is thp "enabled" set to "always" or "madvise"), - determines the synchronous compaction behavior for thp allocations at fault (is thp "defrag" set to "always", "defer+madvise", or "madvise"), and - reverts a previous MADV_NOHUGEPAGE (there is no madvise mode to only clear previous hugepage advice). These are the three purposes that currently exist in 5.2 and over the past several years that userspace has been written around. Adding a NUMA locality preference adds a fourth dimension to an already conflated advice mode. Based on the semantic that MADV_HUGEPAGE has provided over the past several years, there exist workloads that use the tunable based on these principles: specifically that the allocation should attempt to defragment a local node before falling back. It is agreed that remote hugepages typically (but not always) have a better access latency than remote native pages, although on Naples this is at parity for intersocket. The revert commit that this patch reverts allows hugepage allocation to immediately allocate remotely when local memory is fragmented. This is contrary to the semantic of MADV_HUGEPAGE over the past several years: that is, memory compaction should be attempted locally before falling back. The performance degradation of remote hugepages over local hugepages on Rome, for example, is 53.5% increased access latency. For this reason, the goal is to revert back to the 5.2 and previous behavior that would attempt local defragmentation before falling back. With the patch that is reverted by this patch, we see performance degradations at the tail because the allocator happily allocates the remote hugepage rather than even attempting to make a local hugepage available. zone_reclaim_mode is not a solution to this problem since it does not only impact hugepage allocations but rather changes the memory allocation strategy for *all* page allocations. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "An assortment of fixes that were either missed by me, or didn't arrive quite in time for the first v5.4 pull. - Most notable is a fix for an issue with tlbie (broadcast TLB invalidation) on Power9, when using the Radix MMU. The tlbie can race with an mtpid (move to PID register, essentially MMU context switch) on another thread of the core, which can cause stores to continue to go to a page after it's unmapped. - A fix in our KVM code to add a missing barrier, the lack of which has been observed to cause missed IPIs and subsequently stuck CPUs in the host. - A change to the way we initialise PCR (Processor Compatibility Register) to make it forward compatible with future CPUs. - On some older PowerVM systems our H_BLOCK_REMOVE support could oops, fix it to detect such systems and fallback to the old invalidation method. - A fix for an oops seen on some machines when using KASAN on 32-bit. - A handful of other minor fixes, and two new selftests. Thanks to: Alistair Popple, Aneesh Kumar K.V, Christophe Leroy, Gustavo Romero, Joel Stanley, Jordan Niethe, Laurent Dufour, Michael Roth, Oliver O'Halloran" * tag 'powerpc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/eeh: Fix eeh eeh_debugfs_break_device() with SRIOV devices powerpc/nvdimm: use H_SCM_QUERY hcall on H_OVERLAP error powerpc/nvdimm: Use HCALL error as the return value selftests/powerpc: Add test case for tlbie vs mtpidr ordering issue powerpc/mm: Fixup tlbie vs mtpidr/mtlpidr ordering issue on POWER9 powerpc/book3s64/radix: Rename CPU_FTR_P9_TLBIE_BUG feature flag powerpc/book3s64/mm: Don't do tlbie fixup for some hardware revisions powerpc/pseries: Call H_BLOCK_REMOVE when supported powerpc/pseries: Read TLB Block Invalidate Characteristics KVM: PPC: Book3S HV: use smp_mb() when setting/clearing host_ipi flag powerpc/mm: Fix an Oops in kasan_mmu_init() powerpc/mm: Add a helper to select PAGE_KERNEL_RO or PAGE_READONLY powerpc/64s: Set reserved PCR bits powerpc: Fix definition of PCR bits to work with old binutils powerpc/book3s64/radix: Remove WARN_ON in destroy_context() powerpc/tm: Add tm-poison test -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Ingo Molnar: "A kexec fix for the case when GCC_PLUGIN_STACKLEAK=y is enabled" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/purgatory: Disable the stackleak GCC plugin for the purgatory
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: - Apply a number of membarrier related fixes and cleanups, which fixes a use-after-free race in the membarrier code - Introduce proper RCU protection for tasks on the runqueue - to get rid of the subtle task_rcu_dereference() interface that was easy to get wrong - Misc fixes, but also an EAS speedup * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Avoid redundant EAS calculation sched/core: Remove double update_max_interval() call on CPU startup sched/core: Fix preempt_schedule() interrupt return comment sched/fair: Fix -Wunused-but-set-variable warnings sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr() sched/membarrier: Return -ENOMEM to userspace on memory allocation failure sched/membarrier: Skip IPIs when mm->mm_users == 1 selftests, sched/membarrier: Add multi-threaded test sched/membarrier: Fix p->mm->membarrier_state racy load sched/membarrier: Call sync_core only before usermode for same mm sched/membarrier: Remove redundant check sched/membarrier: Fix private expedited registration check tasks, sched/core: RCUify the assignment of rq->curr tasks, sched/core: With a grace period after finish_task_switch(), remove unnecessary code tasks, sched/core: Ensure tasks are available for a grace period after leaving the runqueue tasks: Add a count of task RCU users sched/core: Convert vcpu_is_preempted() from macro to an inline function sched/fair: Remove unused cfs_rq_clock_task() function
-
Linus Torvalds authored
Merge branch 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull kernel lockdown mode from James Morris: "This is the latest iteration of the kernel lockdown patchset, from Matthew Garrett, David Howells and others. From the original description: This patchset introduces an optional kernel lockdown feature, intended to strengthen the boundary between UID 0 and the kernel. When enabled, various pieces of kernel functionality are restricted. Applications that rely on low-level access to either hardware or the kernel may cease working as a result - therefore this should not be enabled without appropriate evaluation beforehand. The majority of mainstream distributions have been carrying variants of this patchset for many years now, so there's value in providing a doesn't meet every distribution requirement, but gets us much closer to not requiring external patches. There are two major changes since this was last proposed for mainline: - Separating lockdown from EFI secure boot. Background discussion is covered here: https://lwn.net/Articles/751061/ - Implementation as an LSM, with a default stackable lockdown LSM module. This allows the lockdown feature to be policy-driven, rather than encoding an implicit policy within the mechanism. The new locked_down LSM hook is provided to allow LSMs to make a policy decision around whether kernel functionality that would allow tampering with or examining the runtime state of the kernel should be permitted. The included lockdown LSM provides an implementation with a simple policy intended for general purpose use. This policy provides a coarse level of granularity, controllable via the kernel command line: lockdown={integrity|confidentiality} Enable the kernel lockdown feature. If set to integrity, kernel features that allow userland to modify the running kernel are disabled. If set to confidentiality, kernel features that allow userland to extract confidential information from the kernel are also disabled. This may also be controlled via /sys/kernel/security/lockdown and overriden by kernel configuration. New or existing LSMs may implement finer-grained controls of the lockdown features. Refer to the lockdown_reason documentation in include/linux/security.h for details. The lockdown feature has had signficant design feedback and review across many subsystems. This code has been in linux-next for some weeks, with a few fixes applied along the way. Stephen Rothwell noted that commit 9d1f8be5 ("bpf: Restrict bpf when kernel lockdown is in confidentiality mode") is missing a Signed-off-by from its author. Matthew responded that he is providing this under category (c) of the DCO" * 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits) kexec: Fix file verification on S390 security: constify some arrays in lockdown LSM lockdown: Print current->comm in restriction messages efi: Restrict efivar_ssdt_load when the kernel is locked down tracefs: Restrict tracefs when the kernel is locked down debugfs: Restrict debugfs when the kernel is locked down kexec: Allow kexec_file() with appropriate IMA policy when locked down lockdown: Lock down perf when in confidentiality mode bpf: Restrict bpf when kernel lockdown is in confidentiality mode lockdown: Lock down tracing and perf kprobes when in confidentiality mode lockdown: Lock down /proc/kcore x86/mmiotrace: Lock down the testmmiotrace module lockdown: Lock down module params that specify hardware parameters (eg. ioport) lockdown: Lock down TIOCSSERIAL lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down acpi: Disable ACPI table override if the kernel is locked down acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down ACPI: Limit access to custom_method when the kernel is locked down x86/msr: Restrict MSR access when the kernel is locked down x86: Lock down IO port access when the kernel is locked down ...
-
Linus Torvalds authored
Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity updates from Mimi Zohar: "The major feature in this time is IMA support for measuring and appraising appended file signatures. In addition are a couple of bug fixes and code cleanup to use struct_size(). In addition to the PE/COFF and IMA xattr signatures, the kexec kernel image may be signed with an appended signature, using the same scripts/sign-file tool that is used to sign kernel modules. Similarly, the initramfs may contain an appended signature. This contained a lot of refactoring of the existing appended signature verification code, so that IMA could retain the existing framework of calculating the file hash once, storing it in the IMA measurement list and extending the TPM, verifying the file's integrity based on a file hash or signature (eg. xattrs), and adding an audit record containing the file hash, all based on policy. (The IMA support for appended signatures patch set was posted and reviewed 11 times.) The support for appended signature paves the way for adding other signature verification methods, such as fs-verity, based on a single system-wide policy. The file hash used for verifying the signature and the signature, itself, can be included in the IMA measurement list" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: ima_api: Use struct_size() in kzalloc() ima: use struct_size() in kzalloc() sefltest/ima: support appended signatures (modsig) ima: Fix use after free in ima_read_modsig() MODSIGN: make new include file self contained ima: fix freeing ongoing ahash_request ima: always return negative code for error ima: Store the measurement again when appraising a modsig ima: Define ima-modsig template ima: Collect modsig ima: Implement support for module-style appended signatures ima: Factor xattr_verify() out of ima_appraise_measurement() ima: Add modsig appraise_type option for module-style appended signatures integrity: Select CONFIG_KEYS instead of depending on it PKCS#7: Introduce pkcs7_get_digest() PKCS#7: Refactor verify_pkcs7_signature() MODSIGN: Export module signature definitions ima: initialize the "template" field with the default template
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd updates from Bruce Fields: "Highlights: - Add a new knfsd file cache, so that we don't have to open and close on each (NFSv2/v3) READ or WRITE. This can speed up read and write in some cases. It also replaces our readahead cache. - Prevent silent data loss on write errors, by treating write errors like server reboots for the purposes of write caching, thus forcing clients to resend their writes. - Tweak the code that allocates sessions to be more forgiving, so that NFSv4.1 mounts are less likely to hang when a server already has a lot of clients. - Eliminate an arbitrary limit on NFSv4 ACL sizes; they should now be limited only by the backend filesystem and the maximum RPC size. - Allow the server to enforce use of the correct kerberos credentials when a client reclaims state after a reboot. And some miscellaneous smaller bugfixes and cleanup" * tag 'nfsd-5.4' of git://linux-nfs.org/~bfields/linux: (34 commits) sunrpc: clean up indentation issue nfsd: fix nfs read eof detection nfsd: Make nfsd_reset_boot_verifier_locked static nfsd: degraded slot-count more gracefully as allocation nears exhaustion. nfsd: handle drc over-allocation gracefully. nfsd: add support for upcall version 2 nfsd: add a "GetVersion" upcall for nfsdcld nfsd: Reset the boot verifier on all write I/O errors nfsd: Don't garbage collect files that might contain write errors nfsd: Support the server resetting the boot verifier nfsd: nfsd_file cache entries should be per net namespace nfsd: eliminate an unnecessary acl size limit Deprecate nfsd fault injection nfsd: remove duplicated include from filecache.c nfsd: Fix the documentation for svcxdr_tmpalloc() nfsd: Fix up some unused variable warnings nfsd: close cached files prior to a REMOVE or RENAME that would replace target nfsd: rip out the raparms cache nfsd: have nfsd_test_lock use the nfsd_file cache nfsd: hook up nfs4_preprocess_stateid_op to the nfsd_file cache ...
-
- 27 Sep, 2019 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse virtio-fs support from Miklos Szeredi: "Virtio-fs allows exporting directory trees on the host and mounting them in guest(s). This isn't actually a new filesystem, but a glue layer between the fuse filesystem and a virtio based back-end. It's similar in functionality to the existing virtio-9p solution, but significantly faster in benchmarks and has better POSIX compliance. Further permformance improvements can be achieved by sharing the page cache between host and guest, allowing for faster I/O and reduced memory use. Kata Containers have been including the out-of-tree virtio-fs (with the shared page cache patches as well) since version 1.7 as an experimental feature. They have been active in development and plan to switch from virtio-9p to virtio-fs as their default solution. There has been interest from other sources as well. The userspace infrastructure is slated to be merged into qemu once the kernel part hits mainline. This was developed by Vivek Goyal, Dave Gilbert and Stefan Hajnoczi" * tag 'virtio-fs-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: virtio-fs: add virtiofs filesystem virtio-fs: add Documentation/filesystems/virtiofs.rst fuse: reserve values for mapping protocol
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: "Some of the usual small fixes and cleanup. Small fixes all around: - avoid overlayfs copy-up for PRIVATE mmaps - KUMSAN uninitialized warning for transport error - one syzbot memory leak fix in 9p cache - internal API cleanup for v9fs_fill_super" * tag '9p-for-5.4' of git://github.com/martinetd/linux: 9p/vfs_super.c: Remove unused parameter data in v9fs_fill_super 9p/cache.c: Fix memory leak in v9fs_cache_session_get_cookie 9p: Transport error uninitialized 9p: avoid attaching writeback_fid on mmap with type PRIVATE
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull more RISC-V updates from Paul Walmsley: "Some additional RISC-V updates. This includes one significant fix: - Prevent interrupts from being unconditionally re-enabled during exception handling if they were disabled in the context in which the exception occurred Also a few other fixes: - Fix a build error when sparse memory support is manually enabled - Prevent CPUs beyond CONFIG_NR_CPUS from being enabled in early boot And a few minor improvements: - DT improvements: in the FU540 SoC DT files, improve U-Boot compatibility by adding an "ethernet0" alias, drop an unnecessary property from the DT files, and add support for the PWM device - KVM preparation: add a KVM-related macro for future RISC-V KVM support, and export some symbols required to build KVM support as modules - defconfig additions: build more drivers by default for QEMU configurations" * tag 'riscv/for-v5.4-rc1-b' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Avoid interrupts being erroneously enabled in handle_exception() riscv: dts: sifive: Drop "clock-frequency" property of cpu nodes riscv: dts: sifive: Add ethernet0 to the aliases node RISC-V: Export kernel symbols for kvm KVM: RISC-V: Add KVM_REG_RISCV for ONE_REG interface arch/riscv: disable excess harts before picking main boot hart RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig RISC-V: Fix building error when CONFIG_SPARSEMEM_MANUAL=y riscv: dts: Add DT support for SiFive FU540 PWM driver -
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2Linus Torvalds authored
Pull nios2 fix from Ley Foon Tan: "Make sure the command line buffer is NUL-terminated" * tag 'nios2-v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: force the string buffer NULL-terminated
-
Navid Emamdoost authored
In ca8210_probe the allocated pdata needs to be assigned to spi_device->dev.platform_data before calling ca8210_get_platform_data. Othrwise when ca8210_get_platform_data fails pdata cannot be released. Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org>
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull more KVM updates from Paolo Bonzini: "x86 KVM changes: - The usual accuracy improvements for nested virtualization - The usual round of code cleanups from Sean - Added back optimizations that were prematurely removed in 5.2 (the bare minimum needed to fix the regression was in 5.3-rc8, here comes the rest) - Support for UMWAIT/UMONITOR/TPAUSE - Direct L2->L0 TLB flushing when L0 is Hyper-V and L1 is KVM - Tell Windows guests if SMT is disabled on the host - More accurate detection of vmexit cost - Revert a pvqspinlock pessimization" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (56 commits) KVM: nVMX: cleanup and fix host 64-bit mode checks KVM: vmx: fix build warnings in hv_enable_direct_tlbflush() on i386 KVM: x86: Don't check kvm_rebooting in __kvm_handle_fault_on_reboot() KVM: x86: Drop ____kvm_handle_fault_on_reboot() KVM: VMX: Add error handling to VMREAD helper KVM: VMX: Optimize VMX instruction error and fault handling KVM: x86: Check kvm_rebooting in kvm_spurious_fault() KVM: selftests: fix ucall on x86 Revert "locking/pvqspinlock: Don't wait if vCPU is preempted" kvm: nvmx: limit atomic switch MSRs kvm: svm: Intercept RDPRU kvm: x86: Add "significant index" flag to a few CPUID leaves KVM: x86/mmu: Skip invalid pages during zapping iff root_count is zero KVM: x86/mmu: Explicitly track only a single invalid mmu generation KVM: x86/mmu: Revert "KVM: x86/mmu: Remove is_obsolete() call" KVM: x86/mmu: Revert "Revert "KVM: MMU: reclaim the zapped-obsolete page first"" KVM: x86/mmu: Revert "Revert "KVM: MMU: collapse TLB flushes when zap all pages"" KVM: x86/mmu: Revert "Revert "KVM: MMU: zap pages in batch"" KVM: x86/mmu: Revert "Revert "KVM: MMU: add tracepoint for kvm_mmu_invalidate_all_pages"" KVM: x86/mmu: Revert "Revert "KVM: MMU: show mmu_valid_gen in shadow page related tracepoints"" ... -
Linus Torvalds authored
Merge tag 'pwm/for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Besides one new driver being added for the PWM controller found in various Spreadtrum SoCs, this series of changes brings a slew of, mostly minor, fixes and cleanups for existing drivers, as well as some enhancements to the core code. Lastly, Uwe is added to the PWM subsystem entry of the MAINTAINERS file, making official his role as a reviewer" * tag 'pwm/for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (34 commits) MAINTAINERS: Add myself as reviewer for the PWM subsystem MAINTAINERS: Add patchwork link for PWM entry MAINTAINERS: Add a selection of PWM related keywords to the PWM entry pwm: mediatek: Add MT7629 compatible string dt-bindings: pwm: Update bindings for MT7629 SoC pwm: mediatek: Update license and switch to SPDX tag pwm: mediatek: Use pwm_mediatek as common prefix pwm: mediatek: Allocate the clks array dynamically pwm: mediatek: Remove the has_clks field pwm: mediatek: Drop the check for of_device_get_match_data() pwm: atmel: Consolidate driver data initialization pwm: atmel: Remove unneeded check for match data pwm: atmel: Remove platform_device_id and use only dt bindings pwm: stm32-lp: Add check in case requested period cannot be achieved pwm: Ensure pwm_apply_state() doesn't modify the state argument pwm: fsl-ftm: Don't update the state for the caller of pwm_apply_state() pwm: sun4i: Don't update the state for the caller of pwm_apply_state() pwm: rockchip: Don't update the state for the caller of pwm_apply_state() pwm: Let pwm_get_state() return the last implemented state pwm: Introduce local struct pwm_chip in pwm_apply_state() ...
-
