- 30 Nov, 2015 5 commits
-
-
Maxim Sheviakov authored
commit 515c752d upstream. There was a typo in the original. bug: https://bugs.freedesktop.org/show_bug.cgi?id=92865Signed-off-by:
Maxim Sheviakov <mrader3940@yandex.ru> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Alex Deucher authored
commit 2b02ec79 upstream. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=92260Signed-off-by:
-
Maxim Sheviakov authored
commit e7865479 upstream. Just adds the quirk for MSI R7 370 Armor 2X Bug: https://bugs.freedesktop.org/show_bug.cgi?id=91294Signed-off-by:
-
Krzysztof Mazur authored
commit 68accac3 upstream. The commit f5f3497c extended the low identity mapping. However, if the kernel uses more than 2 GB (VMSPLIT_2G_OPT or VMSPLIT_1G memory split), the normal memory mapping is overwritten by the low identity mapping causing a crash. To avoid overwritting, limit the low identity map to cover only memory before kernel range (PAGE_OFFSET). Fixes: f5f3497c "x86/setup: Extend low identity map to cover whole kernel range Signed-off-by:
Krzysztof Mazur <krzysiek@podlesie.net> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lkml.kernel.org/r/1446815916-22105-1-git-send-email-krzysiek@podlesie.netSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Paolo Bonzini authored
commit f5f3497c upstream. On 32-bit systems, the initial_page_table is reused by efi_call_phys_prolog as an identity map to call SetVirtualAddressMap. efi_call_phys_prolog takes care of converting the current CPU's GDT to a physical address too. For PAE kernels the identity mapping is achieved by aliasing the first PDPE for the kernel memory mapping into the first PDPE of initial_page_table. This makes the EFI stub's trick "just work". However, for non-PAE kernels there is no guarantee that the identity mapping in the initial_page_table extends as far as the GDT; in this case, accesses to the GDT will cause a page fault (which quickly becomes a triple fault). Fix this by copying the kernel mappings from swapper_pg_dir to initial_page_table twice, both at PAGE_OFFSET and at identity mapping. For some reason, this is only reproducible with QEMU's dynamic translation mode, and not for example with KVM. However, even under KVM one can clearly see that the page table is bogus: $ qemu-system-i386 -pflash OVMF.fd -M q35 vmlinuz0 -s -S -daemonize $ gdb (gdb) target remote localhost:1234 (gdb) hb *0x02858f6f Hardware assisted breakpoint 1 at 0x2858f6f (gdb) c Continuing. Breakpoint 1, 0x02858f6f in ?? () (gdb) monitor info registers ... GDT= 0724e000 000000ff IDT= fffbb000 000007ff CR0=0005003b CR2=ff896000 CR3=032b7000 CR4=00000690 ... The page directory is sane: (gdb) x/4wx 0x32b7000 0x32b7000: 0x03398063 0x03399063 0x0339a063 0x0339b063 (gdb) x/4wx 0x3398000 0x3398000: 0x00000163 0x00001163 0x00002163 0x00003163 (gdb) x/4wx 0x3399000 0x3399000: 0x00400003 0x00401003 0x00402003 0x00403003 but our particular page directory entry is empty: (gdb) x/1wx 0x32b7000 + (0x724e000 >> 22) * 4 0x32b7070: 0x00000000 [ It appears that you can skate past this issue if you don't receive any interrupts while the bogus GDT pointer is loaded, or if you avoid reloading the segment registers in general. Andy Lutomirski provides some additional insight: "AFAICT it's entirely permissible for the GDTR and/or LDT descriptor to point to unmapped memory. Any attempt to use them (segment loads, interrupts, IRET, etc) will try to access that memory as if the access came from CPL 0 and, if the access fails, will generate a valid page fault with CR2 pointing into the GDT or LDT." Up until commit 23a0d4e8 ("efi: Disable interrupts around EFI calls, not in the epilog/prolog calls") interrupts were disabled around the prolog and epilog calls, and the functional GDT was re-installed before interrupts were re-enabled. Which explains why no one has hit this issue until now. ] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Reported-by:
Laszlo Ersek <lersek@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> [ Updated changelog. ] Signed-off-by:
-
- 18 Nov, 2015 1 commit
-
-
Kamal Mostafa authored
Signed-off-by:
-
- 13 Nov, 2015 34 commits
-
-
Guillaume Nault authored
commit 1acea4f6 upstream. We can't rely on PPPOX_ZOMBIE to decide whether to clear po->pppoe_dev. PPPOX_ZOMBIE can be set by pppoe_disc_rcv() even when po->pppoe_dev is NULL. So we have no guarantee that (sk->sk_state & PPPOX_ZOMBIE) implies (po->pppoe_dev != NULL). Since we're releasing a PPPoE socket, we want to release the pppoe_dev if it exists and reset sk_state to PPPOX_DEAD, no matter the previous value of sk_state. So we can just check for po->pppoe_dev and avoid any assumption on sk->sk_state. Fixes: 2b018d57 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
commit 7e3b6e74 upstream. gre_gso_segment() chokes if SIT frames were aggregated by GRO engine. Fixes: 61c1db7f ("ipv6: sit: add GSO/TSO support") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Herbert Xu authored
commit 93efac3f upstream. The IPv6 IPsec pre-encap path performs fragmentation for tunnel-mode packets. That is, we perform fragmentation pre-encap rather than post-encap. A check was added later to ensure that proper MTU information is passed back for locally generated traffic. Unfortunately this check was performed on all IPsec packets, including transport-mode packets. What's more, the check failed to take GSO into account. The end result is that transport-mode GSO packets get dropped at the check. This patch fixes it by moving the tunnel mode check forward as well as adding the GSO check. Fixes: dd767856 ("xfrm6: Don't call icmpv6_send on local error") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com> [ kamal: backported to 3.13: adjusted context ] Signed-off-by:
-
Carol L Soto authored
commit c02b0501 upstream. When doing memcpy/memset of EQEs, we should use sizeof struct mlx4_eqe as the base size and not caps.eqe_size which could be bigger. If caps.eqe_size is bigger than the struct mlx4_eqe then we corrupt data in the master context. When using a 64 byte stride, the memcpy copied over 63 bytes to the slave_eq structure. This resulted in copying over the entire eqe of interest, including its ownership bit -- and also 31 bytes of garbage into the next WQE in the slave EQ -- which did NOT include the ownership bit (and therefore had no impact). However, once the stride is increased to 128, we are overwriting the ownership bits of *three* eqes in the slave_eq struct. This results in an incorrect ownership bit for those eqes, which causes the eq to seem to be full. The issue therefore surfaced only once 128-byte EQEs started being used in SRIOV and (overarchitectures that have 128/256 byte cache-lines such as PPC) - e.g after commit 77507aa2 "net/mlx4_core: Enable CQE/EQE stride support". Fixes: 08ff3235 ('mlx4: 64-byte CQE/EQE support') Signed-off-by:
Carol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Roman Gushchin authored
commit b8a9d66d upstream. After commit 566c09c5 ("raid5: relieve lock contention in get_active_stripe()") __find_stripe() is called under conf->hash_locks + hash. But handle_stripe_clean_event() calls remove_hash() under conf->device_lock. Under some cirscumstances the hash chain can be circuited, and we get an infinite loop with disabled interrupts and locked hash lock in __find_stripe(). This leads to hard lockup on multiple CPUs and following system crash. I was able to reproduce this behavior on raid6 over 6 ssd disks. The devices_handle_discard_safely option should be set to enable trim support. The following script was used: for i in `seq 1 32`; do dd if=/dev/zero of=large$i bs=10M count=100 & done Signed-off-by:
Roman Gushchin <klamm@yandex-team.ru> Fixes: 566c09c5 ("raid5: relieve lock contention in get_active_stripe()") Signed-off-by:
NeilBrown <neilb@suse.com> Cc: Shaohua Li <shli@kernel.org> [ luis: backported to 3.16: used Roman's backport to 3.14 ] Signed-off-by:
-
Ronny Hegewald authored
commit bae818ee upstream. rbd requires stable pages, as it performs a crc of the page data before they are send to the OSDs. But since kernel 3.9 (patch 1d1d1a76 "mm: only enforce stable page writes if the backing device requires it") it is not assumed anymore that block devices require stable pages. This patch sets the necessary flag to get stable pages back for rbd. In a ceph installation that provides multiple ext4 formatted rbd devices "bad crc" messages appeared regularly (ca 1 message every 1-2 minutes on every OSD that provided the data for the rbd) in the OSD-logs before this patch. After this patch this messages are pretty much gone (only ca 1-2 / month / OSD). Signed-off-by:
Ronny Hegewald <Ronny.Hegewald@online.de> [idryomov@gmail.com: require stable pages only in crc case, changelog] Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> [idryomov@gmail.com: backport to 3.9-3.17: context] Signed-off-by:
-
Alex Deucher authored
commit 4cee6a90 upstream. So that the bl encoder will be null if the GPU does not control the backlight. Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Will Deacon authored
commit 9702970c upstream. This reverts commit e306dfd0. With this patch applied, we were the only architecture making this sort of adjustment to the PC calculation in the unwinder. This causes problems for ftrace, where the PC values are matched against the contents of the stack frames in the callchain and fail to match any records after the address adjustment. Whilst there has been some effort to change ftrace to workaround this, those patches are not yet ready for mainline and, since we're the odd architecture in this regard, let's just step in line with other architectures (like arch/arm/) for now. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Dāvis Mosāns authored
commit 22805217 upstream. When pci_pool_alloc fails in mvs_task_prep then task->lldd_task stays NULL but it's later used in mvs_abort_task as slot which is passed to mvs_slot_task_free causing NULL pointer dereference. Just return from mvs_slot_task_free when passed with NULL slot. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101891Signed-off-by:
Dāvis Mosāns <davispuh@gmail.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Joerg Roedel authored
commit cbf3ccd0 upstream. During device assignment/deassignment the flags in the DTE get lost, which might cause spurious faults, for example when the device tries to access the system management range. Fix this by not clearing the flags with the rest of the DTE. Reported-by:
G. Richard Bellamy <rbellamy@pteradigm.com> Tested-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Jes Sorensen authored
commit 681ab469 upstream. This was introduced with 9e882242 which changed the return value of submit_bio_wait() to return != 0 on error, but didn't update the caller accordingly. Fixes: 9e882242 ("block: Add submit_bio_wait(), remove from md") Reported-by:
Bill Kuzeja <William.Kuzeja@stratus.com> Signed-off-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by:
-
Jes Sorensen authored
commit 203d27b0 upstream. This was introduced with 9e882242 which changed the return value of submit_bio_wait() to return != 0 on error, but didn't update the caller accordingly. Fixes: 9e882242 ("block: Add submit_bio_wait(), remove from md") Reported-by:
-
Herbert Xu authored
commit 3fc89adb upstream. Currently a number of Crypto API operations may fail when a signal occurs. This causes nasty problems as the caller of those operations are often not in a good position to restart the operation. In fact there is currently no need for those operations to be interrupted by user signals at all. All we need is for them to be killable. This patch replaces the relevant calls of signal_pending with fatal_signal_pending, and wait_for_completion_interruptible with wait_for_completion_killable, respectively. Signed-off-by:
-
Peter Zijlstra authored
commit 275d7d44 upstream. Poma (on the way to another bug) reported an assertion triggering: [<ffffffff81150529>] module_assert_mutex_or_preempt+0x49/0x90 [<ffffffff81150822>] __module_address+0x32/0x150 [<ffffffff81150956>] __module_text_address+0x16/0x70 [<ffffffff81150f19>] symbol_put_addr+0x29/0x40 [<ffffffffa04b77ad>] dvb_frontend_detach+0x7d/0x90 [dvb_core] Laura Abbott <labbott@redhat.com> produced a patch which lead us to inspect symbol_put_addr(). This function has a comment claiming it doesn't need to disable preemption around the module lookup because it holds a reference to the module it wants to find, which therefore cannot go away. This is wrong (and a false optimization too, preempt_disable() is really rather cheap, and I doubt any of this is on uber critical paths, otherwise it would've retained a pointer to the actual module anyway and avoided the second lookup). While its true that the module cannot go away while we hold a reference on it, the data structure we do the lookup in very much _CAN_ change while we do the lookup. Therefore fix the comment and add the required preempt_disable(). Reported-by:
poma <pomidorabelisima@gmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Fixes: a6e6abd5 ("module: remove module_text_address()") Signed-off-by:
-
Doron Tsur authored
commit 0ca81a28 upstream. ib_send_cm_sidr_rep could sometimes erase the node from the sidr (depending on errors in the process). Since ib_send_cm_sidr_rep is called both from cm_sidr_req_handler and cm_destroy_id, cm_id_priv could be either erased from the rb_tree twice or not erased at all. Fixing that by making sure it's erased only once before freeing cm_id_priv. Fixes: a977049d ('[PATCH] IB: Add the kernel CM implementation') Signed-off-by:
Doron Tsur <doront@mellanox.com> Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Mike Snitzer authored
commit 4dcb8b57 upstream. btree_split_beneath()'s error path had an outstanding FIXME that speaks directly to the potential for _not_ cleaning up a previously allocated bufio-backed block. Fix this by releasing the previously allocated bufio block using unlock_block(). Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Acked-by:
Joe Thornber <thornber@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit 2871c69e upstream. Commit 4c7e3093 ("dm btree remove: fix bug in redistribute3") wasn't a complete fix for redistribute3(). The redistribute3 function takes 3 btree nodes and shares out the entries evenly between them. If the three nodes in total contained (MAX_ENTRIES * 3) - 1 entries between them then this was erroneously getting rebalanced as (MAX_ENTRIES - 1) on the left and right, and (MAX_ENTRIES + 1) in the center. Fix this issue by being more careful about calculating the target number of entries for the left and right nodes. Unit tested in userspace using this program: https://github.com/jthornber/redistribute3-test/blob/master/redistribute3_t.cSigned-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
commit 6d69bb53 upstream. Mapping an image with a long parent chain (e.g. image foo, whose parent is bar, whose parent is baz, etc) currently leads to a kernel stack overflow, due to the following recursion in the reply path: rbd_osd_req_callback() rbd_obj_request_complete() rbd_img_obj_callback() rbd_img_parent_read_callback() rbd_obj_request_complete() ... Limit the parent chain to 16 images, which is ~5K worth of stack. When the above recursion is eliminated, this limit can be lifted. Fixes: http://tracker.ceph.com/issues/12538Signed-off-by:
Josh Durgin <jdurgin@redhat.com> [idryomov@gmail.com: backport to 3.10: rbd_dev->opts, context] Signed-off-by:
-
Ilya Dryomov authored
commit 1f2c6651 upstream. Currently we leak parent_spec and trigger a "parent reference underflow" warning if rbd_dev_create() in rbd_dev_probe_parent() fails. The problem is we take the !parent out_err branch and that only drops refcounts; parent_spec that would've been freed had we called rbd_dev_unparent() remains and triggers rbd_warn() in rbd_dev_parent_put() - at that point we have parent_spec != NULL and parent_ref == 0, so counter ends up being -1 after the decrement. Redo rbd_dev_probe_parent() to fix this. Signed-off-by:
Alex Elder <elder@linaro.org> [idryomov@gmail.com: backport to < 4.2: rbd_dev->opts] Signed-off-by:
-
Ilya Dryomov authored
commit 3ebe138a upstream. If rbd_dev_image_probe() in rbd_dev_probe_parent() fails, header_name is freed twice: once in rbd_dev_probe_parent() and then in its caller rbd_dev_image_probe() (rbd_dev_image_probe() is called recursively to handle parent images). rbd_dev_probe_parent() is responsible for probing the parent, so it shouldn't muck with clone's fields. Signed-off-by:
-
Jan Kara authored
commit 296291cd upstream. Currently a simple program below issues a sendfile(2) system call which takes about 62 days to complete in my test KVM instance. int fd; off_t off = 0; fd = open("file", O_RDWR | O_TRUNC | O_SYNC | O_CREAT, 0644); ftruncate(fd, 2); lseek(fd, 0, SEEK_END); sendfile(fd, fd, &off, 0xfffffff); Now you should not ask kernel to do a stupid stuff like copying 256MB in 2-byte chunks and call fsync(2) after each chunk but if you do, sysadmin should have a way to stop you. We actually do have a check for fatal_signal_pending() in generic_perform_write() which triggers in this path however because we always succeed in writing something before the check is done, we return value > 0 from generic_perform_write() and thus the information about signal gets lost. Fix the problem by doing the signal check before writing anything. That way generic_perform_write() returns -EINTR, the error gets propagated up and the sendfile loop terminates early. Signed-off-by:
Jan Kara <jack@suse.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Vasant Hegde authored
commit 8832317f upstream. Currently we do not validate rtas.entry before calling enter_rtas(). This leads to a kernel oops when user space calls rtas system call on a powernv platform (see below). This patch adds code to validate rtas.entry before making enter_rtas() call. Oops: Exception in kernel mode, sig: 4 [#1] SMP NR_CPUS=1024 NUMA PowerNV task: c000000004294b80 ti: c0000007e1a78000 task.ti: c0000007e1a78000 NIP: 0000000000000000 LR: 0000000000009c14 CTR: c000000000423140 REGS: c0000007e1a7b920 TRAP: 0e40 Not tainted (3.18.17-340.el7_1.pkvm3_1_0.2400.1.ppc64le) MSR: 1000000000081000 <HV,ME> CR: 00000000 XER: 00000000 CFAR: c000000000009c0c SOFTE: 0 NIP [0000000000000000] (null) LR [0000000000009c14] 0x9c14 Call Trace: [c0000007e1a7bba0] [c00000000041a7f4] avc_has_perm_noaudit+0x54/0x110 (unreliable) [c0000007e1a7bd80] [c00000000002ddc0] ppc_rtas+0x150/0x2d0 [c0000007e1a7be30] [c000000000009358] syscall_exit+0x0/0x98 Fixes: 55190f88 ("powerpc: Add skeleton PowerNV platform") Reported-by:
NAGESWARA R. SASTRY <nasastry@in.ibm.com> Signed-off-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> [mpe: Reword change log, trim oops, and add stable + fixes] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Ilia Mirkin authored
commit 2a6c521b upstream. On nv50+, we restrict the valid domains to just the one where the buffer was originally created. However after the buffer is evicted to system memory, we might move it back to a different domain that was not originally valid. When sharing the buffer and retrieving its GEM_INFO data, we still want the domain that will be valid for this buffer in a pushbuf, not the one where it currently happens to be. This resolves fdo#92504 and several others. These are due to suspend evicting all buffers, making it more likely that they temporarily end up in the wrong place. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92504Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Charles Keepax authored
commit 97aff2c0 upstream. There are 24 EQ registers not 25, I suspect this bug came about because the registers start at EQ1 not zero. The bug is relatively harmless as the extra register written is an unused one. Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Laura Abbott authored
commit fd7cd061 upstream. We received several reports of systems rebooting and powering on after an attempted shutdown. Testing showed that setting XHCI_SPURIOUS_WAKEUP quirk in addition to the XHCI_SPURIOUS_REBOOT quirk allowed the system to shutdown as expected for LynxPoint-LP xHCI controllers. Set the quirk back. Note that the quirk was originally introduced for LynxPoint and LynxPoint-LP just for this same reason. See: commit 638298dc ("xhci: Fix spurious wakeups after S5 on Haswell") It was later limited to only concern HP machines as it caused regression on some machines, see both bug and commit: Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=66171 commit 6962d914 ("xhci: Limit the spurious wakeup fix only to HP machines") Later it was discovered that the powering on after shutdown was limited to LynxPoint-LP (Haswell-ULT) and that some non-LP HP machine suffered from spontaneous resume from S3 (which should not be related to the SPURIOUS_WAKEUP quirk at all). An attempt to fix this then removed the SPURIOUS_WAKEUP flag usage completely. commit b45abacd ("xhci: no switching back on non-ULT Haswell") Current understanding is that LynxPoint-LP (Haswell ULT) machines need the SPURIOUS_WAKEUP quirk, otherwise they will restart, and plain Lynxpoint (Haswell) machines may _not_ have the quirk set otherwise they again will restart. Signed-off-by:
Laura Abbott <labbott@fedoraproject.org> Cc: Takashi Iwai <tiwai@suse.de> Cc: Oliver Neukum <oneukum@suse.com> [Added more history to commit message -Mathias] Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Mathias Nyman authored
commit 3b4739b8 upstream. If a host fails to wake up a isochronous SuperSpeed device from U1/U2 in time for a isoch transfer it will generate a "No ping response error" Host will then move to the next transfer descriptor. Handle this case in the same way as missed service errors, tag the current TD as skipped and handle it on the next transfer event. Signed-off-by:
-
Mathias Nyman authored
commit e210c422 upstream. If the difference is big enough between the bytes asked and received in a bulk transfer we can get a short transfer event pointing to a TRB in the middle of the TD. We don't want to handle the TD yet as we will anyway receive a new event for the last TRB in the TD. Hold off from finishing the TD and removing it from the list until we receive an event for the last TRB in the TD Signed-off-by:
-
Charles Keepax authored
commit 34198710 upstream. SX_TLV controls are intended for situations where the register behind the control has some non-zero value indicating the minimum gain and then gains increasing from there and eventually overflowing through zero. Currently every CODEC implementing these controls specifies the minimum as the non-zero value for the minimum and the maximum as the number of gain settings available. This means when the info callback subtracts the minimum value from the maximum value to calculate the number of gain levels available it is actually under reporting the available levels. This patch fixes this issue by adding a new snd_soc_info_volsw_sx callback that does not subtract the minimum value. Fixes: 1d99f243 ("ASoC: core: Rework SOC_DOUBLE_R_SX_TLV add SOC_SINGLE_SX_TLV") Signed-off-by:
Brian Austin <brian.austin@cirrus.com> Tested-by:
-
David Henningsson authored
commit e8d65a8d upstream. Add the appropriate quirk to indicate the Lenovo G50-80 has a stereo mic input where one channel has reverse polarity. Alsa-info available at: https://launchpadlibrarian.net/220846272/AlsaInfo.txt BugLink: https://bugs.launchpad.net/bugs/1504778Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Cathy Avery authored
commit a54c8f0f upstream. xen-blkfront will crash if the check to talk_to_blkback() in blkback_changed()(XenbusStateInitWait) returns an error. The driver data is freed and info is set to NULL. Later during the close process via talk_to_blkback's call to xenbus_dev_fatal() the null pointer is passed to and dereference in blkfront_closing. Signed-off-by:
Cathy Avery <cathy.avery@oracle.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Florian Fainelli authored
commit d836ace6 upstream. DSA expects the host_dev pointer to be the device structure associated with the MDIO bus controller driver. First commit breaking that was c3a07134 ("mv643xx_eth: convert to use the Marvell Orion MDIO driver"), and then, it got completely under the radar for a while. Reported-by:
Frans van de Wiel <fvdw@fvdw.eu> Fixes: c3a07134 ("mv643xx_eth: convert to use the Marvell Orion MDIO driver") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> [ kamal: backport to 3.13-stable: context ] Signed-off-by:
-
Luca Coelho authored
commit f08f6258 upstream. Add 3 new subdevice IDs for the 0x095A device ID and 2 for the 0x095B device ID. Reported-by:
Jeremy <jeremy.bomkamp@gmail.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Johannes Berg authored
commit b5a48134 upstream. The MODULE_FIRMWARE() for 3160 should be using the 7260 version as it's done in the device configuration struct instead of referencing IWL3160_UCODE_API_OK which doesn't even exist. Reported-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
commit 2cf5eb3a upstream. The code to send the RX PN data (for each TID) to the firmware has a devastating bug: it overwrites the data for TID 0 with all the TID data, leaving the remaining TIDs zeroed. This will allow replays to actually be accepted by the firmware, which could allow waking up the system. Signed-off-by:
-
