- 27 Aug, 2015 24 commits
-
-
Toshiaki Makita authored
This enables bridge vlan_protocol to be configured through netlink. When CONFIG_BRIDGE_VLAN_FILTERING is disabled, kernel behaves the same way as this feature is not implemented. Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
This adds support for 3 new PCI device combinations - 1077:16a1, 1077:16a4 and 1077:16ad. Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
-
Guenter Roeck authored
Commit 62ee783b ("smsc911x: Fix crash seen if neither ACPI nor OF is configured or used") introduces an error check for the return value from device_get_phy_mode() and bails out if there is an error. Unfortunately, there are configurations where no phy is configured. Those configurations now fail. To fix the problem, accept error returns from device_get_phy_mode(), and use the return value from device_property_read_u32() to determine if there is a suitable firmware interface to read the configuration. Fixes: 62ee783b ("smsc911x: Fix crash seen if neither ACPI nor OF is configured or used") Tested-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Guenter Roeck authored
Return -ENXIO if device property array access functions don't find a suitable firmware interface. This lets drivers decide if they should use available platform data instead. Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Jeremy Linton <jeremy.linton@arm.com> Signed-off-by:
-
Daniel Borkmann authored
For classifiers getting invoked via tc_classify(), we always need an extra function call into tc_classify_compat(), as both are being exported as symbols and tc_classify() itself doesn't do much except handling of reclassifications when tp->classify() returned with TC_ACT_RECLASSIFY. CBQ and ATM are the only qdiscs that directly call into tc_classify_compat(), all others use tc_classify(). When tc actions are being configured out in the kernel, tc_classify() effectively does nothing besides delegating. We could spare this layer and consolidate both functions. pktgen on single CPU constantly pushing skbs directly into the netif_receive_skb() path with a dummy classifier on ingress qdisc attached, improves slightly from 22.3Mpps to 23.1Mpps. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-08-26 This series contains updates to i40e and i40evf only. Anjali provides a fix for i40e where the part is not receiving multicast or VLAN tagged packets when in promiscuous mode. This can occur when a software bridge is created on top of the device. Fixed the legacy and MSI interrupt mode in the driver, which was non-existent before since we were assuming MSIX was the only mode that the driver ran in. Fixed the i40evf driver, where the wrong defines were getting used in the VF driver. Mitch fixes a sparse warning about comparing __le16 to u16 so use le16_to_cpu() to resolve the warning. Also fixed a dyslexic spelling of invalid. Shannon adds port.crc_errors to receive CRC error counter, since it is a receive counter. Catherine provides a fix to move the stopping of the service task and flow director to i40e_shutdown() instead of i40e_suspend(). Greg fixes the ethtool offline diagnostic with netqueues, which just need to be treated the same as virtual functions when someone wants to run the ethtool offline diagnostic test. Also fixed up code comments for the i40e ethtool diagnostic test function. Cleans up redundant and unneeded messages, since the kernel notifies all VXLAN capable registered drivers, so no need to log this. Neerav adds the ability to update statistics per VEB per traffic class and dump it via ethtool. Jingjing adds support for virtual channel offload to support receive polling mode in the VF driver. v2: dropped patch which added helper functions into a header, feedback from David Miller was to make the functions constant to reduce the driver footprint, so remove the patch while Anjali works on making the requested changes. ==================== Signed-off-by: -
Joe Perches authored
No pr_dbg method exists. While this code is #if 0'd, it'd be nicer to use the generic hex_dump, so use it instead. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
David S. Miller authored
Iyappan Subramanian says: ==================== drivers: net: xgene: Add TSO support Adding TSO support for 10GbE iperf Tx data rate without TSO: 3.42 Gbps with TSO: 9.41 Gbps v2: Address review comments from v1 - skb_linearize() if headers doesn't fit in 3 hardware buffers v1: * Initial version ==================== Signed-off-by:Iyappan Subramanian <isubramanian@apm.com>
-
Iyappan Subramanian authored
Signed-off-by:
-
Iyappan Subramanian authored
- Rearranged descriptor writes - Moved increment command write to xgene_enet_setup_tx_desc Signed-off-by:
-
David S. Miller authored
Joe Stringer says: ==================== OVS conntrack support The goal of this series is to allow OVS to send packets through the Linux kernel connection tracker, and subsequently match on fields populated by conntrack. This functionality is enabled through a new CONFIG_OPENVSWITCH_CONNTRACK option. This version addresses the feedback from v5, primarily checking the behaviour is correct with different configurations such as disabling CONFIG_OPENVSWITCH_CONNTRACK or disabling individual conntrack features like connlabels. The branch below has been updated with the corresponding userspace pieces: https://github.com/joestringer/ovs dev/ct_20150818 ==================== Signed-off-by:
-
Joe Stringer authored
Add support for using conntrack helpers to assist protocol detection. The new OVS_CT_ATTR_HELPER attribute of the CT action specifies a helper to be used for this connection. If no helper is specified, then helpers will be automatically applied as per the sysctl configuration of net.netfilter.nf_conntrack_helper. The helper may be specified as part of the conntrack action, eg: ct(helper=ftp). Initial packets for related connections should be committed to allow later packets for the flow to be considered established. Example ovs-ofctl flows allowing FTP connections from ports 1->2: in_port=1,tcp,action=ct(helper=ftp,commit),2 in_port=2,tcp,ct_state=-trk,action=ct(recirc) in_port=2,tcp,ct_state=+trk-new+est,action=1 in_port=2,tcp,ct_state=+trk+rel,action=1 Signed-off-by:
Joe Stringer <joestringer@nicira.com> Acked-by:
Thomas Graf <tgraf@suug.ch> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Joe Stringer authored
Allow matching and setting the ct_label field. As with ct_mark, this is populated by executing the CT action. The label field may be modified by specifying a label and mask nested under the CT action. It is stored as metadata attached to the connection. Label modification occurs after lookup, and will only persist when the conntrack entry is committed by providing the COMMIT flag to the CT action. Labels are currently fixed to 128 bits in size. Signed-off-by:
-
Joe Stringer authored
Add functions to change connlabel length into nf_conntrack_labels.c so they may be reused by other modules like OVS and nftables without needing to jump through xt_match_check() hoops. Suggested-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Joe Stringer authored
The following patches will reuse this code from OVS. Signed-off-by:
-
Joe Stringer authored
Allow matching and setting the ct_mark field. As with ct_state and ct_zone, these fields are populated when the CT action is executed. To write to this field, a value and mask can be specified as a nested attribute under the CT action. This data is stored with the conntrack entry, and is executed after the lookup occurs for the CT action. The conntrack entry itself must be committed using the COMMIT flag in the CT action flags for this change to persist. Signed-off-by:
Justin Pettit <jpettit@nicira.com> Signed-off-by:
-
Joe Stringer authored
Expose the kernel connection tracker via OVS. Userspace components can make use of the CT action to populate the connection state (ct_state) field for a flow. This state can be subsequently matched. Exposed connection states are OVS_CS_F_*: - NEW (0x01) - Beginning of a new connection. - ESTABLISHED (0x02) - Part of an existing connection. - RELATED (0x04) - Related to an established connection. - INVALID (0x20) - Could not track the connection for this packet. - REPLY_DIR (0x40) - This packet is in the reply direction for the flow. - TRACKED (0x80) - This packet has been sent through conntrack. When the CT action is executed by itself, it will send the packet through the connection tracker and populate the ct_state field with one or more of the connection state flags above. The CT action will always set the TRACKED bit. When the COMMIT flag is passed to the conntrack action, this specifies that information about the connection should be stored. This allows subsequent packets for the same (or related) connections to be correlated with this connection. Sending subsequent packets for the connection through conntrack allows the connection tracker to consider the packets as ESTABLISHED, RELATED, and/or REPLY_DIR. The CT action may optionally take a zone to track the flow within. This allows connections with the same 5-tuple to be kept logically separate from connections in other zones. If the zone is specified, then the "ct_zone" match field will be subsequently populated with the zone id. IP fragments are handled by transparently assembling them as part of the CT action. The maximum received unit (MRU) size is tracked so that refragmentation can occur during output. IP frag handling contributed by Andy Zhou. Based on original design by Justin Pettit. Signed-off-by:
Andy Zhou <azhou@nicira.com> Acked-by:
-
Joe Stringer authored
This variation on skb_dst_copy() doesn't require two skbs. Signed-off-by:
-
Joe Stringer authored
Signed-off-by:
-
Joe Stringer authored
This will allow the ovs-conntrack code to reuse these macros. Signed-off-by:
-
Joe Stringer authored
Previously, we used the kernel-internal netlink actions length to calculate the size of messages to serialize back to userspace. However,the sw_flow_actions may not be formatted exactly the same as the actions on the wire, so store the original actions length when de-serializing and re-use the original length when serializing. Signed-off-by:
-
Rafał Miłecki authored
Broadcom buses may have more than 1 Ethernet device. This is used e.g. to have few interfaces connected to different switch ports. So far we saw chipsets with only 2 devices (e.g. BCM4706) but recent ones have up to 3 (e.g. Netgear R8000 uses 3rd interface for most of switch traffic, lower interfaces are for some kind of offloading). Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2015-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== Major changes: iwlwifi: * new Tx power firmware API * bump max firmware API to 17 * fix bug in debug prints * static checker fix * fix unused defines * fix command list on newest firmware brcmfmac: * support NVRAM loading for bcm47xx platform * new debugfs entry for msgbuf protocol layer used with PCIe devices ath10k: * add spectral scan support for qca99x0 * add qca6164 support ==================== Signed-off-by:
-
Alexei Starovoitov authored
Make sure to indicate to tunnel driver that key.tun_id is set, otherwise gre won't recognize the metadata. Fixes: d3aa45ce ("bpf: add helpers to access tunnel metadata") Signed-off-by:
-
- 26 Aug, 2015 16 commits
-
-
Catherine Sullivan authored
Bump version and update the copyright year for i40evf. Change-ID: Iddb81b9dba09f0dc57ab54937b5821ecdd721ff6 Signed-off-by:
Catherine Sullivan <catherine.sullivan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Neerav Parikh authored
Store the CEE TLV status returned by firmware to allow drivers to dump that for debug purposes. Change-ID: Ie3c4cf8cebabee4f15e1e3fdc4fc8a68bbca40ee Signed-off-by:
Neerav Parikh <neerav.parikh@intel.com> Tested-by:
-
Anjali Singhai Jain authored
Add virtual channel offload capability to support RX polling mode in the VF. Change-ID: Ib643ae2a7506dfc75fc489fc207493fabefa4832 Signed-off-by:
Jingjing Wu <jingjing.wu@intel.com> Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by:
-
Greg Rose authored
The kernel notifies all VXLAN capable registered drivers, i.e. any driver that implements ndo_add_vxlan_port(), of the addition of a port so that the driver can track which ports are in use. There's no need to log this - it just fills the system log with useless and irksome noise. Also, when failing to init SR-IOV interfaces the driver was printing the same message twice. Just remove the inner printk and let the outer message catch enable as well as the other failures. Change-ID: Id5ecb1d425c2a357ee2bc1635dab24553831dade Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
-
Anjali Singhai Jain authored
There were quite a few issues when the wrong defines were getting used in the VF driver. This patch fixes the code where PF driver registers were getting used for VF driver, and also removes the registers that are not being used from the VF register file. Change-ID: If116a9730112950d006eb8ec763998fc914cc839 Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Anjali Singhai Jain authored
Use CTLN1 instead of CTLN for the VF relative register space. Change-ID: Iefba63faf0307af55fec8dbb64f26059f7d91318 Signed-off-by:
-
Mitch Williams authored
Turns out that 'inavlid' is an inavlid spelling for 'invalid'. Change-ID: Ie1fe2d0f8d1ba75ab880594875ec2e4152a76f61 Signed-off-by:
-
Greg Rose authored
The existing comment is incorrect. Add new comment to point out that the PF reset does not affect link but if the reset is changed to a different type that does affect link then the link test would need to be moved to before the reset. Change-ID: I28d786f46e9465860babdee61c1dba51016464df Reported-by:
Jeremiah Kyle <jeremiah.kyle@intel.com> Signed-off-by:
-
Neerav Parikh authored
This patch adds capability to update per VEB per TC statistics and dump it via ethtool. It also adds a structure to hold VEB per TC statistics. The fields can be filled by reading the GLVEBTC_* counters. Change-ID: I28b4759b9ab6ad5a61f046a1bc9ef6b16fe31538 Signed-off-by:
-
Greg Rose authored
Treat netqueues the same way we do virtual functions when someone wants to run the ethtool offline diagnostic test. Change-ID: Id48d2b933f1fd0db7be06305a93c6ebe3dc821f5 Signed-off-by:
-
Anjali Singhai Jain authored
This patch fixes the driver flow to take into account legacy interrupts. Over time we added code that assumes MSIX is the only mode that the driver runs in. It also enables a legacy workaround to trigger SWINT when the TX ring has non-cache aligned descriptors pending and interrupts are disabled. We work with a single vector in MSI mode too, so apply the same restrictions as Legacy. Change-ID: I826ddff1f9bd45d2dbe11f56a3ddcef0dbf42563 Signed-off-by:
-
Catherine Sullivan authored
We should be stopping the service task and flow director on shutdown not on suspension. Signed-off-by:
-
Shannon Nelson authored
The port.crc_errors is really an RX counter, so let's mark it as such. Change-ID: I179afd3f8a95d45229bb4163a6aeb01f0d2d250b Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
-
Mitch Williams authored
Sparse cries when we compare an __le16 to a u16, almost like it cares about architectures other than x86. Weird. Use the le16_to_cpu macro to make it stop crying. Change-ID: Id068f4d7868a2d3df234a791a76d15938f37db35 Signed-off-by:
-
David S. Miller authored
Alexei Starovoitov says: ==================== act_bpf: remove spinlock in fast path v1 version had a race condition in cleanup path of bpf_prog. I tried to fix it by adding new callback 'cleanup_rcu' to 'struct tcf_common' and call it out of act_api cleanup path, but Daniel noticed (thanks for the idea!) that most of the classifiers already do action cleanup out of rcu callback. So instead this set of patches converts tcindex and rsvp classifiers to call tcf_exts_destroy() after rcu grace period and since action cleanup logic in __tcf_hash_release() is only called when bind and refcnt goes to zero, it's guaranteed that cleanup() callback is called from rcu callback. More specifically: patches 1 and 2 - simple fixes patches 2 and 3 - convert tcf_exts_destroy in tcindex and rsvp to call_rcu patch 5 - removes spin_lock from act_bpf The cleanup of actions is now universally done after rcu grace period and in the future we can drop (now unnecessary) call_rcu from tcf_hash_destroy() patch 5 is using synchronize_rcu() in act_bpf replacement path, since it's very rare and alternative of dynamically allocating 'struct tcf_bpf_cfg' just to pass it to call_rcu looks even less appealing. ==================== Signed-off-by: -
Alexei Starovoitov authored
Similar to act_gact/act_mirred, act_bpf can be lockless in packet processing with extra care taken to free bpf programs after rcu grace period. Replacement of existing act_bpf (very rare) is done with synchronize_rcu() and final destruction is done from tc_action_ops->cleanup() callback that is called from tcf_exts_destroy()->tcf_action_destroy()->__tcf_hash_release() when bind and refcnt reach zero which is only possible when classifier is destroyed. Previous two patches fixed the last two classifiers (tcindex and rsvp) to call tcf_exts_destroy() from rcu callback. Similar to gact/mirred there is a race between prog->filter and prog->tcf_action. Meaning that the program being replaced may use previous default action if it happened to return TC_ACT_UNSPEC. act_mirred race betwen tcf_action and tcfm_dev is similar. In all cases the race is harmless. Long term we may want to improve the situation by replacing the whole tc_action->priv as single pointer instead of updating inner fields one by one. Signed-off-by:
-
