1. 15 Oct, 2015 2 commits
  2. 14 Oct, 2015 22 commits
  3. 13 Oct, 2015 16 commits
    • Alexandre Belloni's avatar
      can: at91: remove at91_can_data · 42160a04
      Alexandre Belloni authored
      struct at91_can_data was used to pass a callback to the driver, allowing it
      to switch the transceiver on and off. As all at91 boards are now using DT,
      this is not used anymore, remove that structure.
      Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
      Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      42160a04
    • Arnd Bergmann's avatar
      can: avoid using timeval for uapi · ba61a8d9
      Arnd Bergmann authored
      The can subsystem communicates with user space using a bcm_msg_head
      header, which contains two timestamps. This is problematic for
      multiple reasons:
      
      a) The structure layout is currently incompatible between 64-bit
         user space and 32-bit user space, and cannot work in compat
         mode (other than x32).
      
      b) The timeval structure layout will change in 32-bit user
         space when we fix the y2038 overflow problem by redefining
         time_t to 64-bit, making new 32-bit user space incompatible
         with the current kernel interface.
         Cars last a long time and often use old kernels, so the actual
         users of this code are the most likely ones to migrate to y2038
         safe user space.
      
      This tries to work around part of the problem by changing the
      publicly visible user interface in the header, but not the binary
      interface. Fortunately, the values passed around in the structure
      are relative times and do not actually suffer from the y2038
      overflow, so 32-bit is enough here.
      
      We replace the use of 'struct timeval' with a newly defined
      'struct bcm_timeval' that uses the exact same binary layout
      as before and that still suffers from problem a) but not problem
      b).
      
      The downside of this approach is that any user space program
      that currently assigns a timeval structure to these members
      rather than writing the tv_sec/tv_usec portions individually
      will suffer a compile-time error when built with an updated
      kernel header. Fixing this error makes it work fine with old
      and new headers though.
      
      We could address problem a) by using '__u32' or 'int' members
      rather than 'long', but that would have a more significant
      downside in also breaking support for all existing 64-bit user
      binaries that might be using this interface, which is likely
      not acceptable.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarOliver Hartkopp <socketcan@hartkopp.net>
      Cc: linux-can@vger.kernel.org
      Cc: linux-api@vger.kernel.org
      Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      ba61a8d9
    • Gerhard Bertelsmann's avatar
      can: sun4i: fix MODULE_DESCRIPTION · 3c200db5
      Gerhard Bertelsmann authored
      This patch change description of the module.
      Signed-off-by: default avatarGerhard Bertelsmann <info@gerhard-bertelsmann.de>
      Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      3c200db5
    • Gerhard Bertelsmann's avatar
      can: sun4i: fix arbitration lost error reporting · 887e07be
      Gerhard Bertelsmann authored
      This patch fixes a bug in arbitration error reporting
      Reported-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Signed-off-by: default avatarGerhard Bertelsmann <info@gerhard-bertelsmann.de>
      Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
      887e07be
    • David S. Miller's avatar
      Merge branch 'bridge-vlan' · bbb300eb
      David S. Miller authored
      Nikolay Aleksandrov says:
      
      ====================
      bridge: vlan: cleanups & fixes (part 3)
      
      Patch 01 converts the vlgrp member to use rcu as it was already used in a
      similar way so better to make it official and use all the available RCU
      instrumentation. Patch 02 fixes a bug where the vlan_list can be traversed
      without rtnl or rcu held which could lead to using freed entries.
      Patch 03 removes some redundant code that isn't needed anymore.
      Patch 04 fixes a bug reported by Ido Schimmel about the vlan_flush order
      and switchdevs, it moves it back.
      
      v2: patch 03 and 04 are new, couldn't escape the second synchronize_rcu()
      since the rhtable destruction can sleep
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bbb300eb
    • Nikolay Aleksandrov's avatar
      bridge: vlan: move back vlan_flush · f409d0ed
      Nikolay Aleksandrov authored
      Ido Schimmel reported a problem with switchdev devices because of the
      order change of del_nbp operations, more specifically the move of
      nbp_vlan_flush() which deletes all vlans and frees vlgrp after the
      rx_handler has been unregistered. So in order to fix this move
      vlan_flush back where it was and make it destroy the rhtable after
      NULLing vlgrp and waiting a grace period to make sure noone can see it.
      Reported-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Reviewed-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f409d0ed
    • Nikolay Aleksandrov's avatar
      bridge: vlan: drop unnecessary flush code · b8d02c3c
      Nikolay Aleksandrov authored
      As Ido Schimmel pointed out the vlan_vid_del() code in nbp_vlan_flush is
      unnecessary (and is actually a remnant of the old vlan code) so we can
      remove it.
      Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Reviewed-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b8d02c3c
    • Nikolay Aleksandrov's avatar
      bridge: vlan: use rcu for vlan_list traversal in br_fill_ifinfo · e9c953ef
      Nikolay Aleksandrov authored
      br_fill_ifinfo is called by br_ifinfo_notify which can be called from
      many contexts with different locks held, sometimes it relies upon
      bridge's spinlock only which is a problem for the vlan code, so use
      explicitly rcu for that to avoid problems.
      Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Reviewed-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e9c953ef
    • Nikolay Aleksandrov's avatar
      bridge: vlan: use proper rcu for the vlgrp member · 907b1e6e
      Nikolay Aleksandrov authored
      The bridge and port's vlgrp member is already used in RCU way, currently
      we rely on the fact that it cannot disappear while the port exists but
      that is error-prone and we might miss places with improper locking
      (either RCU or RTNL must be held to walk the vlan_list). So make it
      official and use RCU for vlgrp to catch offenders. Introduce proper vlgrp
      accessors and use them consistently throughout the code.
      Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Reviewed-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      907b1e6e
    • David S. Miller's avatar
      Merge branch 'vrf-ipv6' · 4b918163
      David S. Miller authored
      David Ahern says:
      
      ====================
      net: VRF support in IPv6 stack
      
      Initial support for VRF in IPv6 stack. Makes IPv6 functionality on par
      with IPv4 -- ping, tcp client/server and udp client/server all work fine.
      tcpdump on vrf device and external tap (e.g., host side tap device) shows
      all packets with proper addresses. IPv6 does not need the source address
      operation like IPv4. Verified vti6 works properly in my setup as does use
      of an IPv6 address on the VRF device.
      
      v3
      - re-based to top of net-next (updates per net namespace changes by Eric)
      - fixed dst_entry typecasts as requested by Dave
      - added flags to inet6_rtm_getroute (IPv6 version of deaa0a6a)
      
      v2
      - fixed CONFIG_IPV6 dependency as questioned by Cong
        - if IPV6 is a module, kbuild ensures VRF is a module
        - if IPV6 is disabled IPV6 functionality is compiled out of VRF module
      - addressed comments from Nik over IRC
        - removed duplicate call to netif_is_l3_master in l3mdev_rt6_dst_by_oif
        - changed allocation flag from GFP_ATOMIC to GFP_KERNEL since it is init time
        - added free of rt6i_pcpu
        - check_ipv6_frame returns false only if packet is NDISC type
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4b918163
    • David Ahern's avatar
      net: Add VRF support to IPv6 stack · ca254490
      David Ahern authored
      As with IPv4 support for VRFs added to IPv6 stack by replacing hardcoded
      table ids with possibly device specific ones and manipulating the oif in
      the flowi6. The flow flags are used to skip oif compare in nexthop lookups
      if the device is enslaved to a VRF via the L3 master device.
      Signed-off-by: default avatarDavid Ahern <dsa@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ca254490
    • David Ahern's avatar
      net: Add IPv6 support to VRF device · 35402e31
      David Ahern authored
      Add support for IPv6 to VRF device driver. Implemenation parallels what
      has been done for IPv4.
      Signed-off-by: default avatarDavid Ahern <dsa@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      35402e31
    • David Ahern's avatar
      c4850687
    • David Ahern's avatar
      net: Add IPv6 support to l3mdev · ccf3c8c3
      David Ahern authored
      Add operations to retrieve cached IPv6 dst entry from l3mdev device
      and lookup IPv6 source address.
      Signed-off-by: default avatarDavid Ahern <dsa@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ccf3c8c3
    • Nikolay Aleksandrov's avatar
      bridge: fix gc_timer mod/del race condition · af379392
      Nikolay Aleksandrov authored
      commit c62987bb ("bridge: push bridge setting ageing_time down to
      switchdev") introduced a timer race condition because the gc_timer can
      get rearmed after it's supposedly stopped and flushed in br_dev_delete()
      leading to a use of freed memory. So take rtnl to sync with bridge
      destruction when setting ageing_timer.
      Here's the trace reproduced with these two commands running in parallel:
      while :; do echo 10000 > /sys/class/net/br0/bridge/ageing_timer; done;
      while :; do brctl addbr br0; ip l set br0 up; ip l set br0 down;
      brctl delbr br0; done;
      
      [  300.000029] BUG: unable to handle kernel paging request at
      ffffffff811c59d3
      [  300.000263] IP: [<ffffffff810f168e>] __internal_add_timer+0x2e/0xd0
      [  300.000422] PGD 1a0f067 PUD 1a10063 PMD 10001e1
      [  300.000639] Oops: 0003 [#1] SMP
      [  300.000793] Modules linked in: bridge stp llc nfsd auth_rpcgss
      oid_registry nfs_acl nfs lockd grace fscache sunrpc crct10dif_pclmul
      crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev aesni_intel
      aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd
      snd_hda_codec_generic qxl drm_kms_helper psmouse pcspkr ttm
      snd_hda_intel 9pnet_virtio evdev serio_raw joydev snd_hda_codec 9pnet
      virtio_balloon drm snd_hwdep virtio_console snd_hda_core pvpanic snd_pcm
      i2c_piix4 snd_timer acpi_cpufreq parport_pc snd parport soundcore button
      processor i2c_core ipv6 autofs4 hid_generic usbhid hid ext4 crc16
      mbcache jbd2 sg sr_mod cdrom ata_generic virtio_blk virtio_net e1000
      ehci_pci uhci_hcd ehci_hcd usbcore usb_common floppy ata_piix libata
      virtio_pci virtio_ring virtio scsi_mod
      [  300.004008] CPU: 1 PID: 1169 Comm: bash Not tainted 4.3.0-rc3+ #46
      [  300.004008] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
      [  300.004008] task: ffff880035be2200 ti: ffff88003795c000 task.ti:
      ffff88003795c000
      [  300.004008] RIP: 0010:[<ffffffff810f168e>]  [<ffffffff810f168e>]
      __internal_add_timer+0x2e/0xd0
      [  300.004008] RSP: 0018:ffff88003fd03e78  EFLAGS: 00010046
      [  300.004008] RAX: ffff88003fd0ef60 RBX: 840fc78949c08548 RCX:
      00000001ffffffff
      [  300.004008] RDX: 0000000000000000 RSI: ffffffff811c59d3 RDI:
      ffff88003fd0df00
      [  300.004008] RBP: ffff88003fd03e78 R08: 00000000ffffffff R09:
      0000000000000000
      [  300.004008] R10: 0000000000000000 R11: 0000000000000000 R12:
      ffff88003fd0df00
      [  300.004008] R13: 0000000000000000 R14: 0000000000000001 R15:
      ffffffff816032e0
      [  300.004008] FS:  00007fcbdd609700(0000) GS:ffff88003fd00000(0000)
      knlGS:0000000000000000
      [  300.004008] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      [  300.004008] CR2: ffffffff811c59d3 CR3: 0000000037879000 CR4:
      00000000000406e0
      [  300.004008] Stack:
      [  300.004008]  ffff88003fd03ea8 ffffffff810f1775 ffff88003c8cb958
      ffff88003fd0df00
      [  300.004008]  0000000000000000 0000000000000001 ffff88003fd03f18
      ffffffff810f28c4
      [  300.004008]  ffff88003fd0eb68 ffff88003fd0e968 ffff88003fd0e768
      ffff88003fd0df68
      [  300.004008] Call Trace:
      [  300.004008]  <IRQ>
      [  300.004008]  [<ffffffff810f1775>] cascade+0x45/0x70
      [  300.004008]  [<ffffffff810f28c4>] run_timer_softirq+0x2f4/0x340
      [  300.004008]  [<ffffffff8107e380>] __do_softirq+0xd0/0x440
      [  300.004008]  [<ffffffff8107e8a3>] irq_exit+0xb3/0xc0
      [  300.004008]  [<ffffffff815c2032>] smp_apic_timer_interrupt+0x42/0x50
      [  300.004008]  [<ffffffff815bfe37>] apic_timer_interrupt+0x87/0x90
      [  300.004008]  <EOI>
      [  300.004008]  [<ffffffff811fb80c>] ? create_object+0x13c/0x2e0
      [  300.004008]  [<ffffffff8109b23e>] ? __kernel_text_address+0x4e/0x70
      [  300.004008]  [<ffffffff8109b23e>] ? __kernel_text_address+0x4e/0x70
      [  300.004008]  [<ffffffff8101e17f>] print_context_stack+0x7f/0xf0
      [  300.004008]  [<ffffffff8101d55b>] dump_trace+0x11b/0x300
      [  300.004008]  [<ffffffff8102970b>] save_stack_trace+0x2b/0x50
      [  300.004008]  [<ffffffff811fb80c>] create_object+0x13c/0x2e0
      [  300.004008]  [<ffffffff815b2e8e>] kmemleak_alloc+0x4e/0xb0
      [  300.004008]  [<ffffffff811e475d>] kmem_cache_alloc_trace+0x18d/0x2f0
      [  300.004008]  [<ffffffff8128b139>] kernfs_fop_open+0xc9/0x380
      [  300.004008]  [<ffffffff8120214f>] do_dentry_open+0x1ff/0x2f0
      [  300.004008]  [<ffffffff8128b070>] ? kernfs_fop_release+0x70/0x70
      [  300.004008]  [<ffffffff812034f9>] vfs_open+0x59/0x60
      [  300.004008]  [<ffffffff812130de>] path_openat+0x1ce/0x1260
      [  300.004008]  [<ffffffff812154ae>] do_filp_open+0x7e/0xe0
      [  300.004008]  [<ffffffff812251ff>] ? __alloc_fd+0xaf/0x180
      [  300.004008]  [<ffffffff8120387b>] do_sys_open+0x12b/0x210
      [  300.004008]  [<ffffffff8120397e>] SyS_open+0x1e/0x20
      [  300.004008]  [<ffffffff815bf0b6>] entry_SYSCALL_64_fastpath+0x16/0x7a
      [  300.004008] Code: 66 90 48 8b 46 10 48 8b 4f 40 55 48 89 c2 48 89 e5
      48 29 ca 48 81 fa ff 00 00 00 77 20 0f b6 c0 48 8d 44 c7 68 48 8b 10 48
      85 d2 <48> 89 16 74 04 48 89 72 08 48 89 30 48 89 46 08 5d c3 48 81 fa
      [  300.004008] RIP  [<ffffffff810f168e>] __internal_add_timer+0x2e/0xd0
      [  300.004008]  RSP <ffff88003fd03e78>
      [  300.004008] CR2: ffffffff811c59d3
      
      Fixes: c62987bb ("bridge: push bridge setting ageing_time down to switchdev")
      Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Reviewed-by: default avatarJiri Pirko <jiri@mellanox.com>
      Acked-by: default avatarScott Feldman <sfeldma@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      af379392
    • Nikolay Aleksandrov's avatar
      switchdev: enforce no pvid flag in vlan ranges · cc02aa8e
      Nikolay Aleksandrov authored
      We shouldn't allow BRIDGE_VLAN_INFO_PVID flag in VLAN ranges.
      Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Acked-by: default avatarElad Raz <eladr@mellanox.com>
      Acked-by: default avatarJiri Pirko <jiri@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cc02aa8e