- 16 Apr, 2023 3 commits
-
-
Akinobu Mita authored
This fixes a build error when CONFIG_FAULT_INJECTION_CONFIGFS=y and CONFIG_CONFIGFS_FS=m. Since the fault-injection library cannot built as a module, avoid building configfs as a module. Fixes: 4668c7a2 ("fault-inject: allow configuration via configfs") Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202304150025.K0hczLR4-lkp@intel.com/Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
We have a long chain of memory dereferencing just to whether or not this disk has a special submit_bio helper. As that's not necessarily the common case, add a bd_has_submit_bio state in the bdev to avoid traversing this memory dependency chain if we don't need to. Signed-off-by: -
Jens Axboe authored
This moves struct device out-of-line as it's just used at open/close time, so we can keep some of the commonly used fields closer together. On a standard setup, it also reduces the size from 864 bytes to 848 bytes. Yes, struct device is a pig... Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
- 14 Apr, 2023 17 commits
-
-
Jens Axboe authored
Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.4/block Pull MD updates from Song: "- md/bitmap: Optimal last page size, by Jon Derrick - Various raid10 fixes, by Yu Kuai and Li Nan - md: add error_handlers for raid0 and linear, by Mariusz Tkaczyk" * 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md/raid5: remove unused working_disks variable md/raid10: don't call bio_start_io_acct twice for bio which experienced read error md/raid10: fix memleak of md thread md/raid10: fix memleak for 'conf->bio_split' md/raid10: fix leak of 'r10bio->remaining' for recovery md/raid10: don't BUG_ON() in raise_barrier() md: fix soft lockup in status_resync md: add error_handlers for raid0 and linear md: Use optimal I/O size for last bitmap page md: Fix types in sb writer md: Move sb writer loop to its own function md/raid10: Fix typo in comment (replacment -> replacement) md: make kobj_type structures constant md/raid10: fix null-ptr-deref in raid10_sync_request md/raid10: fix task hung in raid10d
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe updates from Christoph: "nvme updates for Linux 6.4 - drop redundant pci_enable_pcie_error_reporting (Bjorn Helgaas) - validate nvmet module parameters (Chaitanya Kulkarni) - fence TCP socket on receive error (Chris Leech) - fix async event trace event (Keith Busch) - minor cleanups (Chaitanya Kulkarni, zhenwei pi) - fix and cleanup nvmet Identify handling (Damien Le Moal, Christoph Hellwig) - fix double blk_mq_complete_request race in the timeout handler (Lei Yin) - fix irq locking in nvme-fcloop (Ming Lei) - remove queue mapping helper for rdma devices (Sagi Grimberg)" * tag 'nvme-6.4-2023-04-14' of git://git.infradead.org/nvme: nvme-fcloop: fix "inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage" blk-mq-rdma: remove queue mapping helper for rdma devices nvme-rdma: minor cleanup in nvme_rdma_create_cq() nvme: fix double blk_mq_complete_request for timeout request with low probability nvme: fix async event trace event nvme-apple: return directly instead of else nvme-apple: return directly instead of else nvmet-tcp: validate idle poll modparam value nvmet-tcp: validate so_priority modparam value nvme-tcp: fence TCP socket on receive error nvmet: remove nvmet_req_cns_error_complete nvmet: rename nvmet_execute_identify_cns_cs_ns nvmet: fix Identify Identification Descriptor List handling nvmet: cleanup nvmet_execute_identify() nvmet: fix I/O Command Set specific Identify Controller nvmet: fix Identify Active Namespace ID list handling nvmet: fix Identify Controller handling nvmet: fix Identify Namespace handling nvmet: fix error handling in nvmet_execute_identify_cns_cs_ns() nvme-pci: drop redundant pci_enable_pcie_error_reporting()
-
Tom Rix authored
clang with W=1 reports drivers/md/raid5.c:7719:6: error: variable 'working_disks' set but not used [-Werror,-Wunused-but-set-variable] int working_disks = 0; ^ This variable is not used so remove it. Signed-off-by:Tom Rix <trix@redhat.com> Signed-off-by:
Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230327132324.1769595-1-trix@redhat.com
-
Yu Kuai authored
handle_read_error() will resumit r10_bio by raid10_read_request(), which will call bio_start_io_acct() again, while bio_end_io_acct() will only be called once. Fix the problem by don't account io again from handle_read_error(). Fixes: 528bc2cf ("md/raid10: enable io accounting") Suggested-by:
Yu Kuai <yukuai3@huawei.com> Signed-off-by:
-
Yu Kuai authored
In raid10_run(), if setup_conf() succeed and raid10_run() failed before setting 'mddev->thread', then in the error path 'conf->thread' is not freed. Fix the problem by setting 'mddev->thread' right after setup_conf(). Fixes: 43a52123 ("md-cluster: choose correct label when clustered layout is not supported") Signed-off-by:
-
Yu Kuai authored
In the error path of raid10_run(), 'conf' need be freed, however, 'conf->bio_split' is missed and memory will be leaked. Since there are 3 places to free 'conf', factor out a helper to fix the problem. Fixes: fc9977dd ("md/raid10: simplify the splitting of requests.") Signed-off-by:
-
Yu Kuai authored
raid10_sync_request() will add 'r10bio->remaining' for both rdev and replacement rdev. However, if the read io fails, recovery_request_write() returns without issuing the write io, in this case, end_sync_request() is only called once and 'remaining' is leaked, cause an io hang. Fix the problem by decreasing 'remaining' according to if 'bio' and 'repl_bio' is valid. Fixes: 24afd80d ("md/raid10: handle recovery of replacement devices.") Signed-off-by:
-
Yu Kuai authored
If raise_barrier() is called the first time in raid10_sync_request(), which means the first non-normal io is handled, raise_barrier() should wait for all dispatched normal io to be done. This ensures that normal io won't starve. However, BUG_ON() if this is broken is too aggressive. This patch replace BUG_ON() with WARN and fall back to not force. Signed-off-by:
-
Yu Kuai authored
status_resync() will calculate 'curr_resync - recovery_active' to show user a progress bar like following: [============>........] resync = 61.4% 'curr_resync' and 'recovery_active' is updated in md_do_sync(), and status_resync() can read them concurrently, hence it's possible that 'curr_resync - recovery_active' can overflow to a huge number. In this case status_resync() will be stuck in the loop to print a large amount of '=', which will end up soft lockup. Fix the problem by setting 'resync' to MD_RESYNC_ACTIVE in this case, this way resync in progress will be reported to user. Signed-off-by:
-
Mariusz Tkaczyk authored
After the commit 9631abdb("md: Set MD_BROKEN for RAID1 and RAID10") MD_BROKEN must be set if array is failed because state_store() checks it. If it is set then -EBUSY is returned to userspace. For raid0 and linear MD_BROKEN is not set by error_handler(). As a result mdadm is unable to trigger clean-up actions. It is a regression. This patch adds appropriate error_handler for raid0 and linear. The error handler sets MD_BROKEN for this device. Reviewed-by:
Xiao Ni <xni@redhat.com> Signed-off-by:
Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com> Signed-off-by:
-
Jon Derrick authored
If the bitmap space has enough room, size the I/O for the last bitmap page write to the optimal I/O size for the storage device. The expanded write is checked that it won't overrun the data or metadata. The drive this was tested against has higher latencies when there are sub-4k writes due to device-side read-mod-writes of its atomic 4k write unit. This change helps increase performance by sizing the last bitmap page I/O for the device's preferred write unit, if it is given. Example Intel/Solidigm P5520 Raid10, Chunk-size 64M, bitmap-size 57228 bits $ mdadm --create /dev/md0 --level=10 --raid-devices=4 /dev/nvme{0,1,2,3}n1 --assume-clean --bitmap=internal --bitmap-chunk=64M $ fio --name=test --direct=1 --filename=/dev/md0 --rw=randwrite --bs=4k --runtime=60 Without patch: write: IOPS=1676, BW=6708KiB/s (6869kB/s)(393MiB/60001msec); 0 zone resets With patch: write: IOPS=15.7k, BW=61.4MiB/s (64.4MB/s)(3683MiB/60001msec); 0 zone resets Biosnoop: Without patch: Time Process PID Device LBA Size Lat 1.410377 md0_raid10 6900 nvme0n1 W 16 4096 0.02 1.410387 md0_raid10 6900 nvme2n1 W 16 4096 0.02 1.410374 md0_raid10 6900 nvme3n1 W 16 4096 0.01 1.410381 md0_raid10 6900 nvme1n1 W 16 4096 0.02 1.410411 md0_raid10 6900 nvme1n1 W 115346512 4096 0.01 1.410418 md0_raid10 6900 nvme0n1 W 115346512 4096 0.02 1.410915 md0_raid10 6900 nvme2n1 W 24 3584 0.43 <-- 1.410935 md0_raid10 6900 nvme3n1 W 24 3584 0.45 <-- 1.411124 md0_raid10 6900 nvme1n1 W 24 3584 0.64 <-- 1.411147 md0_raid10 6900 nvme0n1 W 24 3584 0.66 <-- 1.411176 md0_raid10 6900 nvme3n1 W 2019022184 4096 0.01 1.411189 md0_raid10 6900 nvme2n1 W 2019022184 4096 0.02 With patch: Time Process PID Device LBA Size Lat 5.747193 md0_raid10 727 nvme0n1 W 16 4096 0.01 5.747192 md0_raid10 727 nvme1n1 W 16 4096 0.02 5.747195 md0_raid10 727 nvme3n1 W 16 4096 0.01 5.747202 md0_raid10 727 nvme2n1 W 16 4096 0.02 5.747229 md0_raid10 727 nvme3n1 W 1196223704 4096 0.02 5.747224 md0_raid10 727 nvme0n1 W 1196223704 4096 0.01 5.747279 md0_raid10 727 nvme0n1 W 24 4096 0.01 <-- 5.747279 md0_raid10 727 nvme1n1 W 24 4096 0.02 <-- 5.747284 md0_raid10 727 nvme3n1 W 24 4096 0.02 <-- 5.747291 md0_raid10 727 nvme2n1 W 24 4096 0.02 <-- 5.747314 md0_raid10 727 nvme2n1 W 2234636712 4096 0.01 5.747317 md0_raid10 727 nvme1n1 W 2234636712 4096 0.02 Reviewed-by:Jon Derrick <jonathan.derrick@linux.dev> Signed-off-by:
-
Jon Derrick authored
Page->index is a pgoff_t and multiplying could cause overflows on a 32-bit architecture. In the sb writer, this is used to calculate and verify the sector being used, and is multiplied by a sector value. Using sector_t will cast it to a u64 type and is the more appropriate type for the unit. Additionally, the integer size unit is converted to a sector unit in later calculations, and is now corrected to be an unsigned type. Finally, clean up the calculations using variable aliases to improve readabiliy. Reviewed-by:
-
Jon Derrick authored
Preparatory patch for optimal I/O size calculation. Move the sb writer loop routine into its own function for clarity. Reviewed-by:
-
Jiangshan Yi authored
Replace replacment with replacement. Signed-off-by:
Jiangshan Yi <yijiangshan@kylinos.cn> Signed-off-by:
-
Thomas Weißschuh authored
Since commit ee6d3dd4 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definitions to prevent modification at runtime. Signed-off-by:
Thomas Weißschuh <linux@weissschuh.net> Signed-off-by:
-
Li Nan authored
init_resync() inits mempool and sets conf->have_replacemnt at the beginning of sync, close_sync() frees the mempool when sync is completed. After [1] recovery might be skipped and init_resync() is called but close_sync() is not. null-ptr-deref occurs with r10bio->dev[i].repl_bio. The following is one way to reproduce the issue. 1) create a array, wait for resync to complete, mddev->recovery_cp is set to MaxSector. 2) recovery is woken and it is skipped. conf->have_replacement is set to 0 in init_resync(). close_sync() not called. 3) some io errors and rdev A is set to WantReplacement. 4) a new device is added and set to A's replacement. 5) recovery is woken, A have replacement, but conf->have_replacemnt is 0. r10bio->dev[i].repl_bio will not be alloced and null-ptr-deref occurs. Fix it by not calling init_resync() if recovery skipped. [1] commit 7e83ccbe ("md/raid10: Allow skipping recovery when clean arrays are assembled") Fixes: 7e83ccbe ("md/raid10: Allow skipping recovery when clean arrays are assembled") Cc: stable@vger.kernel.org Signed-off-by:Li Nan <linan122@huawei.com> Signed-off-by:
-
Li Nan authored
commit fe630de0 ("md/raid10: avoid deadlock on recovery.") allowed normal io and sync io to exist at the same time. Task hung will occur as below: T1 T2 T3 T4 raid10d handle_read_error allow_barrier conf->nr_pending-- -> 0 //submit sync io raid10_sync_request raise_barrier ->will not be blocked ... //submit to drivers raid10_read_request wait_barrier conf->nr_pending++ -> 1 //retry read fail raid10_end_read_request reschedule_retry add to retry_list conf->nr_queued++ -> 1 //sync io fail end_sync_read __end_sync_read reschedule_retry add to retry_list conf->nr_queued++ -> 2 ... handle_read_error get form retry_list conf->nr_queued-- freeze_array wait nr_pending == nr_queued+1 ->1 ->2 //task hung retry read and sync io will be added to retry_list(nr_queued->2) if they fails. raid10d() called handle_read_error() and hung in freeze_array(). nr_queued will not decrease because raid10d is blocked, nr_pending will not increase because conf->barrier is not released. Fix it by moving allow_barrier() after raid10_read_request(). raise_barrier() will wait for nr_waiting to become 0. Therefore, sync io and regular io will not be issued at the same time. Also remove the check of nr_queued in stop_waiting_barrier. It can be 0 but don't need to be blocking. Remove the check for MD_RECOVERY_RUNNING as the check is redundent. Fixes: fe630de0 ("md/raid10: avoid deadlock on recovery.") Signed-off-by:
-
- 13 Apr, 2023 20 commits
-
-
Akinobu Mita authored
The null_blk driver has multiple driver-specific fault injection mechanisms. Each fault injection configuration can only be specified by a module parameter and cannot be reconfigured without reloading the driver. Also, each configuration is common to all devices and is initialized every time a new device is added. This change adds the following subdirectories for each null_blk device. /sys/kernel/config/nullb/<disk>/timeout_inject /sys/kernel/config/nullb/<disk>/requeue_inject /sys/kernel/config/nullb/<disk>/init_hctx_fault_inject Each fault injection attribute can be dynamically set per device by a corresponding file in these directories. Signed-off-by:
-
Akinobu Mita authored
This provides a helper function to allow configuration of fault-injection for configfs-based drivers. The config items created by this function have the same interface as the one created under debugfs by fault_create_debugfs_attr(). Signed-off-by:
-
Christoph Hellwig authored
__blk_mq_run_hw_queue just contains a WARN_ON_ONCE for calls from interrupt context and a blk_mq_run_dispatch_ops-protected call to blk_mq_sched_dispatch_requests. Open code the call to blk_mq_sched_dispatch_requests in both callers, and move the WARN_ON_ONCE to blk_mq_run_hw_queue where it can be extended to all !async calls, while the other call is from workqueue context and thus obviously does not need the assert. Signed-off-by:
Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230413060651.694656-6-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
Only blk_mq_run_hw_queue can call __blk_mq_delay_run_hw_queue with async=false, so move the handling there. With this __blk_mq_delay_run_hw_queue can be merged into blk_mq_delay_run_hw_queue. Signed-off-by:
-
Christoph Hellwig authored
For the in-context dispatch, blk_mq_hctx_stopped is alredy checked in blk_mq_sched_dispatch_requests under blk_mq_run_dispatch_ops() protection. For the async dispatch case having a check before scheduling the work still makes sense to avoid needless workqueue scheduling, so just keep it for that case. Signed-off-by:
-
Christoph Hellwig authored
blk_mq_hctx_stopped is already checked in blk_mq_sched_dispatch_requests under blk_mq_run_dispatch_ops() protection, so remove the duplicate check. Signed-off-by:
-
Christoph Hellwig authored
__blk_mq_sched_dispatch_requests currently has duplicated logic for the cases where requests are on the hctx dispatch list or not. Merge the two with a new need_dispatch variable and remove a few pointless local variables. Signed-off-by:
-
Christoph Hellwig authored
Replace the boolean at_head argument with the same flags that are already passed to blk_mq_insert_request. Signed-off-by:
-
Christoph Hellwig authored
Instead of passing a bool at_head, pass down the full flags from the blk_mq_insert_request interface. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
-
Christoph Hellwig authored
Replace the boolean at_head argument with the same flags that are already passed to blk_mq_insert_request. Signed-off-by:
-
Christoph Hellwig authored
Replace the at_head bool with a flags argument that so far only contains a single BLK_MQ_INSERT_AT_HEAD value. This makes it much easier to grep for head insertions into the blk-mq dispatch queues. Signed-off-by:
-
Christoph Hellwig authored
blk_mq_add_to_requeue_list takes a bool parameter to control how to kick the requeue list at the end of the function. Move the call to blk_mq_kick_requeue_list to the callers that want it instead. Signed-off-by:
-
Christoph Hellwig authored
blk_mq_request_bypass_insert takes a bool parameter to control how to run the queue at the end of the function. Move the blk_mq_run_hw_queue call to the callers that want it instead. Signed-off-by:
-
Christoph Hellwig authored
blk_mq_insert_request takes two bool parameters to control how to run the queue at the end of the function. Move the blk_mq_run_hw_queue call to the callers that want it instead. Signed-off-by:
-
Christoph Hellwig authored
Due to the wildly different behavior based on the bypass_insert argument, not a whole lot of code in __blk_mq_try_issue_directly is actually shared between blk_mq_try_issue_directly and blk_mq_request_issue_directly. Remove __blk_mq_try_issue_directly and fold the code into the two callers instead. Signed-off-by:
-
Christoph Hellwig authored
Factor out a helper from __blk_mq_try_issue_directly in preparation of folding that function into its two callers. Signed-off-by:
-
Christoph Hellwig authored
Split the RQF_DONTPREP and RQF_SOFTBARRIER in separate branches to make the code more readable. Signed-off-by:
-
Christoph Hellwig authored
While both passthrough and flush requests call directly into blk_mq_request_bypass_insert, the parameters aren't the same. Split the handling into two separate conditionals and turn the whole function into an if/elif/elif/else flow instead of the gotos. Signed-off-by:
-
Christoph Hellwig authored
Just call blk_mq_add_to_requeue_list directly from the two callers. Signed-off-by:
-
Christoph Hellwig authored
Remove this very small helper and fold it into the only caller. Note that this moves the trace_block_rq_insert out of ctx->lock, matching the other calls to this tracepoint. Signed-off-by:
-
