- 10 Jan, 2016 13 commits
-
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Adding layer 2 multicast Elad says: This patchset add Linux hardware reflection for L2 multicast offload and add MC support in mlxsw. For every bridge MDB entry insertion, either by IGMP snooping or by static insertion/removal, a switchdev ops is been called. In mlxsw, a new multicast group (MID) is been created and ports are assigned. When all ports are removed, the multicast group is been deleted. --- v1->v2: - GFP_ATOMIC->GFP_KERNEL change in patch 7/8 ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Elad Raz authored
Signed-off-by:
Elad Raz <eladr@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Elad Raz authored
Add SWITCHDEV_OBJ_ID_PORT_MDB switchdev ops support. On first MDB insertion creates a new multicast group (MID) and add members port to the MID. Also add new MDB entry for the flooding-domain (fid-vid) and link the MDB entry to the newly constructed MC group. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Elad Raz authored
Adding a generic function that translate VID to FID. Signed-off-by:
-
Elad Raz authored
Signed-off-by:
-
Elad Raz authored
Adding back SMID register definition and packing. For each MC group a new SMID entry will be generated. Signed-off-by:
-
Elad Raz authored
Multicast-related records have specific format in SFD register. Signed-off-by:
-
Elad Raz authored
Offload MDB changes per port to hardware Signed-off-by:
-
Elad Raz authored
Define HW multicast entry: MAC and VID. Using a MAC address simplifies support for both IPV4 and IPv6. Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Antonio Quartulli says: ==================== Included changes: - increase internal module version - increase BLA wait periods to 6 - purge BLA backbone table when it is disabled - make sure post function is invoked only if sysfs value is changed - simplify code by removing useless NULL checks - various corrections to existing kerneldoc - minor cleanups ==================== Signed-off-by: -
Jiri Pirko authored
It may happen that we get notification for FDB entry for object (port, lag, vport), which does not exist. Currently we ignore that, which only causes this being re-sent in next notification. The entry will never disappear. So get rid of it by simply removing it using SFD register. Signed-off-by:
-
Jiri Pirko authored
Do not pass struct mlxsw_sp_port to mlxsw_sp_port_fdb_uc_op and rather just pass local_port. This is needed in case this is called from SFN process function and mlxsw_sp_port is not existent for particular local_port. Signed-off-by:
-
Sudip Mukherjee authored
Modify plip driver to use the new parallel port device model. Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
- 09 Jan, 2016 25 commits
-
-
Sven Eckelmann authored
Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc>
-
Sven Eckelmann authored
Signed-off-by:
-
Sven Eckelmann authored
Signed-off-by:
-
Sven Eckelmann authored
kernel-doc is not able to skip an #ifdef between the kernel documentation block and the start of the struct. Moving the #ifdef before the kernel doc block avoids this problem Signed-off-by:
-
Sven Eckelmann authored
Signed-off-by:
-
Markus Elfring authored
Let us split a check for a condition at the beginning of the batadv_is_ap_isolated() function so that a direct return can be performed in this function if the variable "vlan" contained a null pointer. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
The batadv_softif_vlan_free_ref() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
* Let us return directly if a call of the batadv_orig_hash_find() function returned a null pointer. * Omit the initialisation for the variable "skb" at the beginning. * Replace an assignment by a call of the kfree_skb() function and delete the affected variable "ret" then. Signed-off-by:
-
Markus Elfring authored
The kfree_skb() function tests whether its argument is NULL and then returns immediately. Thus the test around the calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Sven Eckelmann authored
The code to convert the throughput information from a string to the batman-adv internal (100Kibit/s) representation is duplicated in batadv_parse_gw_bandwidth. Move this functionality to its own function batadv_parse_throughput to reduce the code complexity. Signed-off-by:
Sven Eckelmann <sven@open-mesh.com> Signed-off-by:
-
Simon Wunderlich authored
Currently, the post function is also called on errors or if there were no changes, which is redundant for the functions currently using these facilities. Signed-off-by:
Simon Wunderlich <simon@open-mesh.com> Signed-off-by:
-
Simon Wunderlich authored
If networks take a long time to come up, e.g. due to lossy links, then the bridge loop avoidance wait time to suppress broadcasts may not wait long enough and detect a backbone before the mesh is brought up. Increasing the wait period further to 60 seconds makes this scenario less likely. Signed-off-by:
-
Simon Wunderlich authored
When bridge loop avoidance is disabled through sysfs, the internal datastructures are not disabled, but only BLA operations are disabled. To be sure that they are removed, purge the data immediately. That is especially useful if a firmwares network state is changed, and the BLA wait periods should restart on the new network. Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
-
Sven Eckelmann authored
The function handles tlv containers and not tlv handlers. Thus the lockdep_assert_held has to check for the container_list lock. Fixes: 2c72d655 ("batman-adv: Annotate deleting functions with external lock via lockdep") Signed-off-by:
-
Simon Wunderlich authored
Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
David S. Miller authored
Hayes Wang says: ==================== r8152: code adjustment Adjust test_bit(), clear_bit(), disable_aldps(), and enable_aldps(). ==================== Signed-off-by: -
hayeswang authored
Replace disable_aldps() and enable_aldps() with aldps_en(). Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
hayeswang authored
Replace test_bit() followed by clear_bit() with test_and_clear_bit(). Signed-off-by:
-
Daniel Borkmann authored
Move the details behind the cb[] access into a small helper to decouple and make them generic for bpf_prog_run_save_cb()/bpf_prog_run_clear_cb() that was introduced via commit ff936a04 ("bpf: fix cb access in socket filter programs"). Also add a comment to better clarify what is done in bpf_skb_cb(). Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
David S. Miller authored
Lance Richardson says: ==================== ipv4: fix various issues reported by sparse This trivial patch series addresses a number of endianness- and lock-related issues reported by sparse. ==================== Signed-off-by: -
Lance Richardson authored
Add lock release/acquire annotations to ping_seq_start() and ping_seq_stop() to satisfy sparse. Signed-off-by:
Lance Richardson <lrichard@redhat.com> Signed-off-by:
-
Lance Richardson authored
fib_multipath_hash() computes a hash using __be32 values, force cast these to u32 to pacify sparse. Signed-off-by:
-
Lance Richardson authored
Eliminate endianness mismatch warnings (reported by sparse) in this file by using appropriate nla_put_*()/nla_get_*() calls. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next, they are: 1) Release nf_tables objects on netns destructions via nft_release_afinfo(). 2) Destroy basechain and rules on netdevice removal in the new netdev family. 3) Get rid of defensive check against removal of inactive objects in nf_tables. 4) Pass down netns pointer to our existing nfnetlink callbacks, as well as commit() and abort() nfnetlink callbacks. 5) Allow to invert limit expression in nf_tables, so we can throttle overlimit traffic. 6) Add packet duplication for the netdev family. 7) Add forward expression for the netdev family. 8) Define pr_fmt() in conntrack helpers. 9) Don't leave nfqueue configuration on inconsistent state in case of errors, from Ken-ichirou MATSUZAWA, follow up patches are also from him. 10) Skip queue option handling after unbind. 11) Return error on unknown both in nfqueue and nflog command. 12) Autoload ctnetlink when NFQA_CFG_F_CONNTRACK is set. 13) Add new NFTA_SET_USERDATA attribute to store user data in sets, from Carlos Falgueras. 14) Add support for 64 bit byteordering changes nf_tables, from Florian Westphal. 15) Add conntrack byte/packet counter matching support to nf_tables, also from Florian. ==================== Signed-off-by:
-
- 08 Jan, 2016 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2016-01-08 This series contains updates to ixgbe only. Vasu provides three fixes for ixgbe, first assigns a minimum credit to a traffic class to resolve a Tx hang for CEE mode configuration. Second fix changes the driver to use netdev->fcoe_ddp_xid instead of our local IXGBE_FCOE_DDP_MAX, since it is correctly set for our different devices and avoids a DDP skip error on X550. Lastly fix the PFC configuration to include X550 devices. Emil provides a fix for reporting the speed in ethtool by using the stored value in out adapter structure. This is due to external drivers may end up with unknown speed when calling ethtool_get_settings(). Mark fixes the handling of any outer UDP checksum, by passing the skb up with CHECKSUM_NONE when an outer UDP checksum is set. This will cause the stack to check the checksum, also do not increment an error counter because we do not really know if there is an actual error. Ixgbe ATR was not handling IPv6 extended headers, so ATR is not being performed on such packets. Fix this by skipping extended headers when they are present. Usha fixes an issue with X550 and getting FDMI HBA attributes when FCoE support is enabled. Neerav fixes an issue for X550 when FCoE and SR-IOV are enabled, which the hardware generates MDD events. Resolve this by setting the expected values in the transmit context descriptors for FCoE/FIP frames and adding a flush after writing the RDLEN register. ==================== Signed-off-by: -
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-01-08 Here's one more bluetooth-next pull request for the 4.5 kernel: - Support for CRC check and promiscuous mode for CC2520 - Fixes to btmrvl driver - New ACPI IDs for hci_bcm driver - Limited Discovery support for the Bluetooth mgmt interface - Minor other cleanups here and there Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
