* 'for-linus' of git://git.alsa-project.org/alsa-kernel: (258 commits)
  ALSA: hda: VREF powerdown for headphones
  ALSA: hda: STAC_HP_M4
  ALSA: ASoC: Check for machine type in GTA01 machine driver
  ALSA: mtpav - Fix race in probe
  ALSA: usb-audio: dynamic detection of MIDI interfaces in uaxx-quirk
  ALSA: Add a note on dependency of RTC stuff
  ALSA: ASoC: add new param mux to dapm_mux_update_power
  ALSA: Increase components array size
  ALSA: ASoC: Correct inverted Mic PGA Switch control in wm8510 driver
  ALSA: hda: comment typo fix
  ALSA: hda: comment typo fix
  ALSA: hda - Fix PCI SSID for ASROCK K18N78FullHD-hSLI
  ALSA: snd-usb-audio: support for Edirol UA-4FX device
  ALSA: usb - Fix possible Oops at USB-MIDI disconnection
  ALSA: hda - Fix another ALC889A (rev 0x100101)
  ALSA: hda: add more board-specific information for Realtek ALC662 rev1
  ALSA: Correct Vladimir Barinov's e-mail address
  ALSA: cs46xx: Add PCI IDs for TerraTec and Hercules cards
  ALSA: hda: SPDIF stream muting support
  ALSA: hda: appletv support
  ...

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (27 commits)
  [S390] Fix checkstack for s390
  [S390] fix initialization of stp
  [S390] 3215: Remove tasklet.
  [S390] console flush on panic / reboot
  [S390] introduce dirty bit for kvm live migration
  [S390] Add ioctl support for EMC Symmetrix Subsystem Control I/O
  [S390] xpram: per device block request queues.
  [S390] dasd: fix message flood for unsolicited interrupts
  [S390] Move private simple udelay function to arch/s390/lib/delay.c.
  [S390] dcssblk: add >2G DCSSs support and stacked contiguous DCSSs support.
  [S390] ptrace changes
  [S390] s390: use sys_pause for 31bit pause entry point
  [S390] qdio enhanced SIGA (iqdio) support.
  [S390] cio: fix cio_tpi.
  [S390] cio: Correct use of ! and &
  [S390] cio: inline assembly cleanup
  [S390] bus_id -> dev_set_name() for css and ccw busses
  [S390] bus_id ->dev_name() conversions in qdio
  [S390] Use s390_root_dev_* in kvm_virtio.
  [S390] more bus_id -> dev_name conversions
  ...

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix BUG: using smp_processor_id() in preemptible code
  [CPUFREQ] Don't export governors for default governor
  [CPUFREQ][6/6] cpufreq: Add idle microaccounting in ondemand governor
  [CPUFREQ][5/6] cpufreq: Changes to get_cpu_idle_time_us(), used by ondemand governor
  [CPUFREQ][4/6] cpufreq_ondemand: Parameterize down differential
  [CPUFREQ][3/6] cpufreq: get_cpu_idle_time() changes in ondemand for idle-microaccounting
  [CPUFREQ][2/6] cpufreq: Change load calculation in ondemand for software coordination
  [CPUFREQ][1/6] cpufreq: Add cpu number parameter to __cpufreq_driver_getavg()
  [CPUFREQ] use deferrable delayed work init in conservative governor
  [CPUFREQ] drivers/cpufreq/cpufreq.c: Adjust error handling code involving cpufreq_cpu_put
  [CPUFREQ] add error handling for cpufreq_register_governor() error
  [CPUFREQ] acpi-cpufreq: add error handling for cpufreq_register_driver() error
  [CPUFREQ] Coding style fixes to arch/x86/kernel/cpu/cpufreq/powernow-k6.c
  [CPUFREQ] Coding style fixes to arch/x86/kernel/cpu/cpufreq/elanfreq.c

* 'rcu-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (21 commits)
  rcu: RCU-based detection of stalled CPUs for Classic RCU, fix
  rcu: RCU-based detection of stalled CPUs for Classic RCU
  rcu: add rcu_read_lock_sched() / rcu_read_unlock_sched()
  rcu: fix sparse shadowed variable warning
  doc/RCU: fix pseudocode in rcuref.txt
  rcuclassic: fix compiler warning
  rcu: use irq-safe locks
  rcuclassic: fix compilation NG
  rcu: fix locking cleanup fallout
  rcu: remove redundant ACCESS_ONCE definition from rcupreempt.c
  rcu: fix classic RCU locking cleanup lockdep problem
  rcu: trace fix possible mem-leak
  rcu: just rename call_rcu_bh instead of making it a macro
  rcu: remove list_for_each_rcu()
  rcu: fixes to include/linux/rcupreempt.h
  rcu: classic RCU locking and memory-barrier cleanups
  rcu: prevent console flood when one CPU sees another AWOL via RCU
  rcu, debug: detect stalled grace periods, cleanups
  rcu, debug: detect stalled grace periods
  rcu classic: new algorithm for callbacks-processing(v2)
  ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  selinux: Fix an uninitialized variable BUG/panic in selinux_secattr_to_sid()
  selinux: use default proc sid on symlinks
  file capabilities: uninline cap_safe_nice
  Update selinux info in MAINTAINERS and Kconfig help text
  SELinux: add gitignore file for mdp script
  SELinux: add boundary support and thread context assignment
  securityfs: do not depend on CONFIG_SECURITY
  selinux: add support for installing a dummy policy (v2)
  security: add/fix security kernel-doc
  selinux: Unify for- and while-loop style
  selinux: conditional expression type validation was off-by-one
  smack: limit privilege by label
  SELinux: Fix a potentially uninitialised variable in SELinux hooks
  SELinux: trivial, remove unneeded local variable
  SELinux: Trivial minor fixes that change C null character style
  make selinux_write_opts() static

Merge branch 'sched-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (38 commits)
  sched debug: add name to sched_domain sysctl entries
  sched: sync wakeups vs avg_overlap
  sched: remove redundant code in cpu_cgroup_create()
  sched_rt.c: resch needed in rt_rq_enqueue() for the root rt_rq
  cpusets: scan_for_empty_cpusets(), cpuset doesn't seem to be so const
  sched: minor optimizations in wake_affine and select_task_rq_fair
  sched: maintain only task entities in cfs_rq->tasks list
  sched: fixup buddy selection
  sched: more sanity checks on the bandwidth settings
  sched: add some comments to the bandwidth code
  sched: fixlet for group load balance
  sched: rework wakeup preemption
  CFS scheduler: documentation about scheduling policies
  sched: clarify ifdef tangle
  sched: fix list traversal to use _rcu variant
  sched: turn off WAKEUP_OVERLAP
  sched: wakeup preempt when small overlap
  kernel/cpu.c: create a CPU_STARTING cpu_chain notifier
  kernel/cpu.c: Move the CPU_DYING notifiers
  sched: fix __load_balance_iterator() for cfq with only one task
  ...

With -march=z990 and later gcc can use the long displacement facility
insruction lay for stack register handling. This patch adopts checkstack
to catch lay in addition to ahi and aghi.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

chsc_sstpc returns -EIO on error and 0 on success but stp_reset checks
against 1 instead of 0. chsc_sstpc used to return 1 on success, one
call location has not been updated ..
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The 3215 console irq handler used to schedule a tasklet. However the
console irq handler also gets called from the infamous cio_tpi()
function. Which in turn does something like

local_bh_disable()
[call console irq handler]
_local_bh_enable()

_local_bh_enable() prevents execution of softirqs, which is intended
within cio_tpi(). However there might be a new softirq pending because
irq handler scheduled a tasklet.
In order to prevent this behaviour we just get rid of the tasklet.
It's not doing much anyway.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The s390 console drivers use the unblank callback of the console
structure to flush the console buffer. In case of a panic or a
reboot the CPU doing the callback can block on the console i/o.
The other CPUs in the system continue to work. For panic this is
not a good idea.

Replace the unblank callback with proper panic/reboot notifier.
These get called after all but one CPU have been stopped.
Signed-off-by: Holger Smolinski <Holger.Smolinski@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

This patch defines a dirty bit in the PGSTE that can be used to implement
dirty pages logging for KVM's live migration. The bit is set in the
ptep_rcp_copy function, which is called to save dirty and referenced information
from the storage key in the PGSTE. The bit can be tested and reset by KVM using
the kvm_s390_test_and_clear_page_dirty function that is introduced by this patch.
Acked-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Florian Funke <ffunke@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

EMC Symmetrix Subsystem Control I/O through CKD dasd requires a
specific parameter list sent to the array via a Perform Subsystem
Function CCW. The Symmetrix response is retrieved from the array
via a Read Subsystem Data CCW.
Signed-off-by: Nigel Hislop <hislop_nigel@emc.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The xpram driver uses a single block device queue for all of its
devices so far. With recent kernels removing xpram module fails to
clean up all sysfs files. The next time the xpram module is loaded
you'll get warnings:

  WARNING: at fs/sysfs/dir.c:463 sysfs_add_one+0x5e/0x64()
  sysfs: duplicate filename '35:0' can not be created
  Modules linked in: xpram(+) [last unloaded: xpram]

Followed by the usual WARN_ON output, followed by an error message
from kobject_add_internal, followed by a badness in genhd. Allocating
a block queue per device fixes this.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

In the unsolicited interupt handler fake IRBs from CIO have to be
ignored because there is nothing to do.
The function dump_sense should not be called if there is no sense
data available.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Move cio's private simple udelay function to lib/delay.c and turn it
into something much more readable. So we have all implementations
at one place.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The DCSS block device driver is modified to add >2G DCSSs support and
allow a DCSS block device to map to a set of contiguous DCSSs.  The
extmem code is also modified to use new Diagnose x'64' subcodes for
>2G DCSSs.
Signed-off-by: Hongjie Yang <hongjie@us.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

* System call parameter and result access functions
* Add tracehook calls
* Split syscall_trace into two functions do_syscall_trace_enter and
  do_syscall_trace_exit
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

sys32_pause is a useless copy of the generic sys_pause.
(and it's certainly not there for old sparc32 binaries..)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add support for z10 HiperSockets multiwrite SBALs on output
queues. This is used on LPAR with EDDP enabled devices.
Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

In cio_tpi only disable bottom halves when not in interrupt context.
Otherwise a WARN_ON gets triggered. Besides that, when we are in
interrupt context bottom halves are disabled anyway.
Fixes this one:

Badness at kernel/softirq.c:77
Modules linked in:
CPU: 2 Not tainted 2.6.26 #4
Process swapper (pid: 0, task: 000000003fe83db0, ksp: 000000003fea7d28)
Krnl PSW : 0404c00180000000 0000000000053f4e (__local_bh_disable+0xbe/0xcc)
           R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3
Krnl GPRS: 0000000000008ee0 00000000005f95e0 0000000000000000 0000000000000001
           000000000020be92 0000000000000000 0000000000000210 00000000005d36c0
           000000003fb5f4d8 0000000000000000 000000000020bed0 000000003fb5f3c8
           00000000009be920 0000000000364898 000000003fb5f408 000000003fb5f3c8
Krnl Code: 0000000000053f42: bf2f1000           icm     %r2,15,0(%r1)
           0000000000053f46: a774ffc5           brc     7,53ed0
           0000000000053f4a: a7f40001           brc     15,53f4c
          >0000000000053f4e: a7280001           lhi     %r2,1
           0000000000053f52: 50201000           st      %r2,0(%r1)
           0000000000053f56: a7f4ffbd           brc     15,53ed0
           0000000000053f5a: 0707               bcr     0,%r7
           0000000000053f5c: a7f13fc0           tmll    %r15,16320
Call Trace:
([<0000000000000210>] 0x210)
 [<0000000000053f86>] local_bh_disable+0x2a/0x38
 [<000000000020bed0>] wait_cons_dev+0xd4/0x154
 [<0000000000247cb2>] raw3215_make_room+0x6a/0x1a8
 [<000000000024861a>] raw3215_write+0x86/0x28c
 [<00000000002488a0>] con3215_write+0x80/0x110
 [<000000000004c3e0>] __call_console_drivers+0xc8/0xe4
 [<000000000004c47e>] _call_console_drivers+0x82/0xc4
 [<000000000004c744>] release_console_sem+0x218/0x2c0
 [<000000000004cf64>] vprintk+0x3c0/0x504
 [<0000000000354a4a>] printk+0x52/0x64
 [<0000000000088004>] __print_symbol+0x40/0x50
 [<0000000000071dbc>] print_stack_trace+0x78/0xac
 [<0000000000079e78>] print_lock_dependencies+0x148/0x208
 [<000000000007a050>] print_irq_inversion_bug+0x118/0x15c
 [<000000000007a106>] check_usage_forwards+0x72/0x84
 [<000000000007a36e>] mark_lock+0x1d2/0x594
 [<000000000007baca>] __lock_acquire+0x886/0xf48
 [<000000000007c234>] lock_acquire+0xa8/0xe0
 [<0000000000350316>] _write_lock+0x56/0x98
 [<000000000026cd92>] zfcp_erp_adapter_reopen+0x4e/0x8c
 [<000000000026f1e8>] zfcp_qdio_int_resp+0x2e4/0x2f4
 [<00000000002210f4>] qdio_int_handler+0x274/0x888
 [<00000000002177b6>] ccw_device_call_handler+0x6e/0xd8
 [<0000000000215336>] ccw_device_irq+0xd6/0x160
 [<0000000000212f88>] io_subchannel_irq+0x8c/0x118
 [<000000000020c120>] do_IRQ+0x1d0/0x1fc
 [<00000000000270b2>] io_return+0x0/0x8
 [<000000000001c8a4>] cpu_idle+0x178/0x21c
([<000000000001c884>] cpu_idle+0x158/0x21c)
 [<00000000003483a2>] start_secondary+0xb6/0xc8
INFO: lockdep is turned off.
Last Breaking-Event-Address:
 [<0000000000053f4a>] __local_bh_disable+0xba/0xcc
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

In commit e6bafba5, a bug was fixed that
involved converting !x & y to !(x & y).  The code below shows the same
pattern, and thus should perhaps be fixed in the same way.  In particular,
the result of !scsw_stctl(&request->irb.scsw) & SCSW_STCTL_STATUS_PEND is
always just !scsw_stctl(&request->irb.scsw).

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@ expression E; constant C; @@
(
  !E & !C
|
- !E & C
+ !(E & C)
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Fix incorrect in- and output constraints, remove volatile declaration
of inline assembly parameters and reformat constraint declarations to
be more consistent.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Convert remaining s390 users setting bus_id to dev_set_name()
or init_name.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Use dev_name() in the new qdio driver.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

No need to define a static device for the kvm_s390 root device,
just use s390_root_dev_register().

This is needed for the bus_id rework
Acked-by: Carsten Otte <cotte@de.ibm.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Some further bus_id -> dev_name() conversions in s390 code.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Convert most s390 users setting bus_id to dev_set_name().
css and ccw busses are deferred since they need some special
treatment.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

bus_id -> dev_name() conversions in s390 code.

[cornelia.huck@de.ibm.com: minor adaptions]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add documentation for the new "purge" cio_ignore parameter.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Allow users to remove blacklisted ccw devices by using the
/proc/cio_ignore interface:

  echo purge > /proc/cio_ignore

will remove all devices which are offline and blacklisted.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Use dedicated slow path work queue when unregistering a device due to
a user action. This ensures serialialization of other register/
unregister requests.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

If an asynchronous HiperSockets queue runs full, no further packet
can be sent. In this case the next initiative to give transmitted
skbs back to the stack is triggered only by a 10-seconds qdio timer.
This timer has been introduced for low multicast traffic scenarios
to guarantee freeing of skbs in a limited amount of time. For high
HiperSocket multicast traffic scenarios progress checking on the
outbound queue should be enforced by tasklet rescheduling.
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: skcipher - Use RNG interface instead of get_random_bytes
  crypto: rng - RNG interface and implementation
  crypto: api - Add fips_enable flag
  crypto: skcipher - Move IV generators into their own modules
  crypto: cryptomgr - Test ciphers using ECB
  crypto: api - Use test infrastructure
  crypto: cryptomgr - Add test infrastructure
  crypto: tcrypt - Add alg_test interface
  crypto: tcrypt - Abort and only log if there is an error
  crypto: crc32c - Use Intel CRC32 instruction
  crypto: tcrypt - Avoid using contiguous pages
  crypto: api - Display larval objects properly
  crypto: api - Export crypto_alg_lookup instead of __crypto_alg_lookup
  crypto: Kconfig - Replace leading spaces with tabs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (29 commits)
  RDMA/nes: Fix slab corruption
  IB/mlx4: Set RLKEY bit for kernel QPs
  RDMA/nes: Correct error_module bit mask
  RDMA/nes: Fix routed RDMA connections
  RDMA/nes: Enhanced PFT management scheme
  RDMA/nes: Handle AE bounds violation
  RDMA/nes: Limit critical error interrupts
  RDMA/nes: Stop spurious MAC interrupts
  RDMA/nes: Correct tso_wqe_length
  RDMA/nes: Fill in firmware version for ethtool
  RDMA/nes: Use ethtool timer value
  RDMA/nes: Correct MAX TSO frags value
  RDMA/nes: Enable MC/UC after changing MTU
  RDMA/nes: Free NIC TX buffers when destroying NIC QP
  RDMA/nes: Fix MDC setting
  RDMA/nes: Add wqm_quanta module option
  RDMA/nes: Module parameter permissions
  RDMA/cxgb3: Set active_mtu in ib_port_attr
  RDMA/nes: Add support for 4-port 1G HP blade card
  RDMA/nes: Make mini_cm_connect() static
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: choose better identifiers
  dlm: remove bkl
  dlm: fix address compare
  dlm: fix locking of lockspace list in dlm_scand
  dlm: detect available userspace daemon
  dlm: allow multiple lockspace creates

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm: detect lost queue
  dm: publish dm_vcalloc
  dm: publish dm_table_unplug_all
  dm: publish dm_get_mapinfo
  dm: export struct dm_dev
  dm crypt: avoid unnecessary wait when splitting bio
  dm crypt: tidy ctx pending
  dm crypt: fix async inc_pending
  dm crypt: move dec_pending on error into write_io_submit
  dm crypt: remove inc_pending from write_io_submit
  dm crypt: tidy write loop pending
  dm crypt: tidy crypt alloc
  dm crypt: tidy inc pending
  dm exception store: use chunk_t for_areas
  dm exception store: introduce area_location function
  dm raid1: kcopyd should stop on error if errors handled
  dm mpath: remove is_active from struct dm_path
  dm mpath: use more error codes

Fixed up trivial conflict in drivers/md/dm-mpath.c manually.

Currently we disable barriers as soon as we get a buffer in xlog_iodone
that has the XBF_ORDERED flag cleared.  But this can be the case not only
for buffers where the barrier failed, but also the first buffer of a
split log write in case of a log wraparound.  Due to the disabled
barriers we can easily get directory corruption on unclean shutdowns.
So instead of using this check add a new buffer flag for failed barrier
writes.

This is a regression vs 2.6.26 caused by patch to use the right macro
to check for the ORDERED flag, as we previously got true returned for
every buffer.

Thanks to Toei Rei for reporting the bug.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: David Chinner <david@fromorbit.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
  GFS2: Support for I/O barriers
  GFS2: Add UUID to GFS2 sb
  GFS2: high time to take some time over atime
  GFS2: The war on bloat
  GFS2: GFS2 will panic if you misspell any mount options
  GFS2: Direct IO write at end of file error
  GFS2: Use an IS_ERR test rather than a NULL test
  GFS2: Fix race relating to glock min-hold time
  GFS2: Fix & clean up GFS2 rename
  GFS2: rm on multiple nodes causes panic
  GFS2: Fix metafs mounts
  GFS2: Fix debugfs glock file iterator

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (37 commits)
  [SCSI] zfcp: fix double dbf id usage
  [SCSI] zfcp: wait on SCSI work to be finished before proceeding with init dev
  [SCSI] zfcp: fix erp list usage without using locks
  [SCSI] zfcp: prevent fc_remote_port_delete calls for unregistered rport
  [SCSI] zfcp: fix deadlock caused by shared work queue tasks
  [SCSI] zfcp: put threshold data in hba trace
  [SCSI] zfcp: Simplify zfcp data structures
  [SCSI] zfcp: Simplify get_adapter_by_busid
  [SCSI] zfcp: remove all typedefs and replace them with standards
  [SCSI] zfcp: attach and release SAN nameserver port on demand
  [SCSI] zfcp: remove unused references, declarations and flags
  [SCSI] zfcp: Update message with input from review
  [SCSI] zfcp: add queue_full sysfs attribute
  [SCSI] scsi_dh: suppress comparison warning
  [SCSI] scsi_dh: add Dell product information into rdac device handler
  [SCSI] qla2xxx: remove the unused SCSI_QLOGIC_FC_FIRMWARE option
  [SCSI] qla2xxx: fix printk format warnings
  [SCSI] qla2xxx: Update version number to 8.02.01-k8.
  [SCSI] qla2xxx: Ignore payload reserved-bits during RSCN processing.
  [SCSI] qla2xxx: Additional residual-count corrections during UNDERRUN handling.
  ...