Changing the port closing-wait parameter is a privileged operation so
make sure to return -EPERM if a regular user tries to change it.

Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.

The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.

The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds. The driver does not yet support changing
close_delay, but let's report back the default value actually used (0.5
seconds).
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.

Similarly, baud_base could be used to set the UART base clock when it
could not be detected but might as well be left unset when it is not
known.

The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds (not jiffies). The driver does not yet support
changing these, but let's report back the default values actually used
(0.5 and 30 seconds, respectively).

Fixes: 52af9545 ("USB: add USB serial ssu100 driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.

Similarly, baud_base could be used to set the UART base clock when it
could not be detected but might as well be left unset when it is not
known.

The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds (not jiffies). The driver does not yet support
changing these, but let's report back the default values actually used
(0.5 and 30 seconds, respectively).

Fixes: f7a33e60 ("USB: serial: add quatech2 usb to serial driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.

The baud_base parameter could be used to set the UART base clock when it
could not be detected but might as well be left unset when it is not
known.

The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds. The driver does not yet support changing
these, but let's report back the default values actually used (0.5 and
30 seconds, respectively).
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.

Similarly, baud_base could be used to set the UART base clock when it
could not be detected but might as well be left unset when it is not
known.

The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds (not jiffies). The driver does not yet support
changing these, but let's report back the default values actually used
(0.5 and 30 seconds, respectively).

Fixes: faac64ad ("USB: serial: opticon: add serial line ioctls")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.

The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.

Similarly, baud_base could be used to set the UART base clock when it
could not be detected but might as well be left unset when it is not
known.

The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds (not jiffies). The driver does not yet support
changing these, but let's report back the default values actually used
(0.5 and 30 seconds, respectively).

Fixes: 3f542974 ("USB: Moschip 7840 USB-Serial Driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.

The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.

Similarly, baud_base could be used to set the UART base clock when it
could not be detected but might as well be left unset when it is not
known.

The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds (not jiffies). The driver does not yet support
changing these, but let's report back the default values actually used
(0.5 and 30 seconds, respectively).

Fixes: 0f64478c ("USB: add USB serial mos7720 driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.

The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.

Similarly, baud_base could be used to set the UART base clock when it
could not be detected but might as well be left unset when it is not
known.

The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds (not jiffies). The driver does not yet support
changing close_delay, but let's report back the default value actually
used (0.5 seconds).
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.

The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.

Similarly, baud_base could be used to set the uart base clock when it
could not be detected, but might as well be left unset when it is not
known.

The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds (not jiffies). The driver does not yet support
changing these, but let's report back the default values actually used
(0.5 and 30 seconds, respectively).
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

The FTDI driver is the only USB serial driver supporting the deprecated
ASYNC_SPD flags, which are reported back as they should by TIOCGSERIAL,
but the returned parameters did not include the line number.

The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds. The driver does not yet support changing
these, but let's report back the default values actually used (0.5 and
30 seconds, respectively).
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.

The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds. The driver does not yet support changing
these, but let's report back the default values actually used (0.5 and
30 seconds, respectively).

Fixes: aac1fc38 ("USB: serial: add Fintek F81232 usb to serial driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.

The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds. The driver does not yet support changing
these, but let's report back the default values actually used (0.5 and
30 seconds, respectively).

Fixes: aac1fc38 ("USB: serial: add Fintek F81232 usb to serial driver")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.

The baud_base parameter could be used to set the UART base clock when it
could not be detected but might as well be left unset when it is not
known.

The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds. The driver does not yet support changing
these, but let's report back the default values actually used (0.5 and
30 seconds, respectively).

Fixes: 2f430b4b ("USB: ark3116: Add TIOCGSERIAL and TIOCSSERIAL ioctl calls.")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

Use the new multi-interface support in USB serial core to properly claim
also the control interface during probe. This prevents having another
driver claim the control interface and makes core allocate resources
also for the interrupt endpoint (currently unused).

Switch to probing only Communication Class interfaces and use the Union
functional descriptor to determine the corresponding data interface.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

A single USB function can be implemented using a group of interfaces and
this is for example commonly used for Communication Class devices.

Add support for multi-interface functions to USB serial core and export
an interface that allows drivers to claim a second sibling interface.
The interface could easily be extended to allow claiming further
interfaces if ever needed.

When a driver claims a sibling interface in probe(), core allocates
resources for any bulk in, bulk out, interrupt in and interrupt out
endpoints found also on the sibling interface.

Disconnect is implemented so that unbinding either interface will
release the other interface while disconnect() is called precisely once.

Similarly, suspend() is called when the first sibling interface is
suspended and resume() is called when the last sibling interface is
resumed by USB core.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

Refactor endpoint classification and replace the build-time
endpoint-array sanity checks with runtime checks in preparation for
handling endpoints from a sibling interface.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

The suspending flag was added back in 2009 but no users ever followed.
Remove it.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

The XR21V141X does not have a 5- or 6-bit mode, but the current
implementation failed to properly restore the old setting when CS5 or
CS6 was requested. Instead an invalid request would be sent to the
device.

Fixes: c2d405aa ("USB: serial: add MaxLinear/Exar USB to Serial driver")
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org	# 5.12
Signed-off-by: Johan Hovold <johan@kernel.org>

The variable error is initialized to 0 and is set to 1 this
value is never read as it is on an immediate return path. The
only read of error is to check it is 0 and this check is always
true at that point of the code. The variable is redundant and
can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Johan Hovold <johan@kernel.org>

Use an alternate clock divider algorithm and bit ordering for the TA and
TB versions of the pl2303. It was discovered that these variants do not
produce the correct baud rates with the existing scheme.

see https://lore.kernel.org/r/3aee5708-7961-f464-8c5f-6685d96920d6@IEEE.orgSigned-off-by: Michael G. Katzmann <michaelk@IEEE.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

Add names for the device types to be printed at probe when debugging is
enabled.

Note that the HXN type is referred to as G for now as that is the name
the vendor uses.
Signed-off-by: Johan Hovold <johan@kernel.org>

Tighten the detection of the new HXN (G) type instead of assuming that
every device which doesn't support the old read request is an HXN.
Signed-off-by: Johan Hovold <johan@kernel.org>

Rename the legacy type which is supposedly a PL2303H which came in two
variants (and which we handle the same way).
Signed-off-by: Johan Hovold <johan@kernel.org>

Add support for detecting the HX, TA, TB and HXD device types and refuse
to bind to any unknown types.

Note that the HX type includes the XA variant, while the HXD type
includes the EA, RA and SA variants.
Signed-off-by: Johan Hovold <johan@kernel.org>

Clean up the type detection somewhat in preparation for adding support
for more types.

Note this also fixes the type debug printk for the new HXN type.
Signed-off-by: Johan Hovold <johan@kernel.org>

Forward declarations make the code larger and rewrites harder. Harder as
they are often omitted from global changes. Remove forward declarations
which are not really needed, i.e. the definition of the function is
before its first use.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ johan: update the prototype comments ]
Signed-off-by: Johan Hovold <johan@kernel.org>

Forward declarations make the code larger, harder to follow and rewrite.
Harder as the declarations are often omitted from global changes. Remove
forward declarations which are not really needed, i.e. when the
definition of the function is before its first use.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>

Doing a

	prctl(PR_SET_MM, PR_SET_MM_AUXV, addr, 1);

will copy 1 byte from userspace to (quite big) on-stack array
and then stash everything to mm->saved_auxv.
AT_NULL terminator will be inserted at the very end.

/proc/*/auxv handler will find that AT_NULL terminator
and copy original stack contents to userspace.

This devious scheme requires CAP_SYS_RESOURCE.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull irq fixes from Thomas Gleixner:
 "A set of irqchip updates:

   - Make the GENERIC_IRQ_MULTI_HANDLER configuration correct

   - Add a missing DT compatible string for the Ingenic driver

   - Remove the pointless debugfs_file pointer from struct irqdomain"

* tag 'irq-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/ingenic: Add support for the JZ4760
  dt-bindings/irq: Add compatible string for the JZ4760B
  irqchip: Do not blindly select CONFIG_GENERIC_IRQ_MULTI_HANDLER
  ARM: ep93xx: Select GENERIC_IRQ_MULTI_HANDLER directly
  irqdomain: Remove debugfs_file from struct irq_domain

Pull timer fix from Thomas Gleixner:
 "A single fix in for hrtimers to prevent an interrupt storm caused by
  the lack of reevaluation of the timers which expire in softirq context
  under certain circumstances, e.g. when the clock was set"

* tag 'timers-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hrtimer: Update softirq_expires_next correctly after __hrtimer_get_next_event()

Pull scheduler fixes from Thomas Gleixner:
 "A set of scheduler updates:

   - Prevent a NULL pointer dereference in the migration_stop_cpu()
     mechanims

   - Prevent self concurrency of affine_move_task()

   - Small fixes and cleanups related to task migration/affinity setting

   - Ensure that sync_runqueues_membarrier_state() is invoked on the
     current CPU when it is in the cpu mask"

* tag 'sched-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/membarrier: fix missing local execution of ipi_sync_rq_state()
  sched: Simplify set_affinity_pending refcounts
  sched: Fix affine_move_task() self-concurrency
  sched: Optimize migration_cpu_stop()
  sched: Collate affine_move_task() stoppers
  sched: Simplify migration_cpu_stop()
  sched: Fix migration_cpu_stop() requeueing

Pull objtool fix from Thomas Gleixner:
 "A single objtool fix to handle the PUSHF/POPF validation correctly for
  the paravirt changes which modified arch_local_irq_restore not to use
  popf"

* tag 'objtool-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool,x86: Fix uaccess PUSHF/POPF validation

Pull locking fixes from Thomas Gleixner:
 "A couple of locking fixes:

   - A fix for the static_call mechanism so it handles unaligned
     addresses correctly.

   - Make u64_stats_init() a macro so every instance gets a seperate
     lockdep key.

   - Make seqcount_latch_init() a macro as well to preserve the static
     variable which is used for the lockdep key"

* tag 'locking-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  seqlock,lockdep: Fix seqcount_latch_init()
  u64_stats,lockdep: Fix u64_stats_init() vs lockdep
  static_call: Fix the module key fixup

Pull perf fixes from Borislav Petkov:

 - Make sure PMU internal buffers are flushed for per-CPU events too and
   properly handle PID/TID for large PEBS.

 - Handle the case properly when there's no PMU and therefore return an
   empty list of perf MSRs for VMX to switch instead of reading random
   garbage from the stack.

* tag 'perf_urgent_for_v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/perf: Use RET0 as default for guest_get_msrs to handle "no PMU" case
  perf/x86/intel: Set PERF_ATTACH_SCHED_CB for large PEBS and LBR
  perf/core: Flush PMU internal buffers for per-CPU events

Pull EFI fix from Ard Biesheuvel via Borislav Petkov:
 "Fix an oversight in the handling of EFI_RT_PROPERTIES_TABLE, which was
  added v5.10, but failed to take the SetVirtualAddressMap() RT service
  into account"

* tag 'efi-urgent-for-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: stub: omit SetVirtualAddressMap() if marked unsupported in RT_PROP table

Pull x86 fixes from Borislav Petkov:

 - A couple of SEV-ES fixes and robustifications: verify usermode stack
   pointer in NMI is not coming from the syscall gap, correctly track
   IRQ states in the #VC handler and access user insn bytes atomically
   in same handler as latter cannot sleep.

 - Balance 32-bit fast syscall exit path to do the proper work on exit
   and thus not confuse audit and ptrace frameworks.

 - Two fixes for the ORC unwinder going "off the rails" into KASAN
   redzones and when ORC data is missing.

* tag 'x86_urgent_for_v5.12_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev-es: Use __copy_from_user_inatomic()
  x86/sev-es: Correctly track IRQ states in runtime #VC handler
  x86/sev-es: Check regs->sp is trusted before adjusting #VC IST stack
  x86/sev-es: Introduce ip_within_syscall_gap() helper
  x86/entry: Fix entry/exit mismatch on failed fast 32-bit syscalls
  x86/unwind/orc: Silence warnings caused by missing ORC data
  x86/unwind/orc: Disable KASAN checking in the ORC unwinder, part 2

Pull powerpc fixes from Michael Ellerman:
 "Some more powerpc fixes for 5.12:

   - Fix wrong instruction encoding for lis in ppc_function_entry(),
     which could potentially lead to missed kprobes.

   - Fix SET_FULL_REGS on 32-bit and 64e, which prevented ptrace of
     non-volatile GPRs immediately after exec.

   - Clean up a missed SRR specifier in the recent interrupt rework.

   - Don't treat unrecoverable_exception() as an interrupt handler, it's
     called from other handlers so shouldn't do the interrupt entry/exit
     accounting itself.

   - Fix build errors caused by missing declarations for
     [en/dis]able_kernel_vsx().

  Thanks to Christophe Leroy, Daniel Axtens, Geert Uytterhoeven, Jiri
  Olsa, Naveen N. Rao, and Nicholas Piggin"

* tag 'powerpc-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/traps: unrecoverable_exception() is not an interrupt handler
  powerpc: Fix missing declaration of [en/dis]able_kernel_vsx()
  powerpc/64s/exception: Clean up a missed SRR specifier
  powerpc: Fix inverted SET_FULL_REGS bitop
  powerpc/64s: Use symbolic macros for function entry encoding
  powerpc/64s: Fix instruction encoding for lis in ppc_function_entry()

Pull KVM fixes from Paolo Bonzini:
 "More fixes for ARM and x86"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: LAPIC: Advancing the timer expiration on guest initiated write
  KVM: x86/mmu: Skip !MMU-present SPTEs when removing SP in exclusive mode
  KVM: kvmclock: Fix vCPUs > 64 can't be online/hotpluged
  kvm: x86: annotate RCU pointers
  KVM: arm64: Fix exclusive limit for IPA size
  KVM: arm64: Reject VM creation when the default IPA size is unsupported
  KVM: arm64: Ensure I-cache isolation between vcpus of a same VM
  KVM: arm64: Don't use cbz/adr with external symbols
  KVM: arm64: Fix range alignment when walking page tables
  KVM: arm64: Workaround firmware wrongly advertising GICv2-on-v3 compatibility
  KVM: arm64: Rename __vgic_v3_get_ich_vtr_el2() to __vgic_v3_get_gic_config()
  KVM: arm64: Don't access PMSELR_EL0/PMUSERENR_EL0 when no PMU is available
  KVM: arm64: Turn kvm_arm_support_pmu_v3() into a static key
  KVM: arm64: Fix nVHE hyp panic host context restore
  KVM: arm64: Avoid corrupting vCPU context register in guest exit
  KVM: arm64: nvhe: Save the SPE context early
  kvm: x86: use NULL instead of using plain integer as pointer
  KVM: SVM: Connect 'npt' module param to KVM's internal 'npt_enabled'
  KVM: x86: Ensure deadline timer has truly expired before posting its IRQ