- 13 Sep, 2017 18 commits
-
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: wait more carefully for card init The first patch is a small fix for flower offload, we need a whitelist of supported matches, otherwise the unsupported ones will be ignored. The second and the third patch are adding wait/polling to the probe path. We had reports of driver failing probe because it couldn't find the control process (NSP) on the card. Turns out the NSP will only announce its existence after it's fully initialized. Until now we assumed it will be reachable, just not processing commands (hence we wait for a NOOP command to execute successfully). v2: - fix a bad merge which resulted in a build warning and retest. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
The control process (NSP) may take some time to complete its initialization. This is not a problem on most servers, but on very fast-booting machines it may not be ready for operation when driver probes the device. There is also a version of the flash in the wild where NSP tries to train the links as part of init. To wait for NSP initialization we should make sure its resource has already been added to the resource table. NSP adds itself there as last step of init. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
Board state informs us which low-level initialization stages the card has completed. We should wait for the card to be fully initialized before trying to communicate with it, not only before we configure passing traffic. Signed-off-by:
-
Pieter Jansen van Vuuren authored
Previously we did not check the flow dissector against a list of allowed and supported flow key dissectors. This patch introduces such a list and correctly rejects unsupported flow keys. Fixes: 43f84b72 ("nfp: add metadata to each flow offload") Signed-off-by:
Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Reviewed-by:
-
Jiri Pirko authored
Recent commit d7fb60b9 ("net_sched: get rid of tcfa_rcu") removed freeing in call_rcu, which changed already existing hard-to-hit race condition into 100% hit: [ 598.599825] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [ 598.607782] IP: tcf_action_destroy+0xc0/0x140 Or: [ 40.858924] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [ 40.862840] IP: tcf_generic_walker+0x534/0x820 Fix this by storing the ops and use them directly for module_put call. Fixes: a85a970a ("net_sched: move tc_action into tcf_common") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Suresh Reddy authored
IPv6 TSO requests with extension hdrs are a problem to the Lancer and BEx chips. Workaround is to disable TSO6 feature for such packets. Also in Lancer chips, MSS less than 256 was resulting in TX stall. Fix this by disabling GSO when MSS less than 256. Signed-off-by:
Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by:
-
Arnd Bergmann authored
A randconfig build caused a compile failure: drivers/net/ethernet/nuvoton/w90p910_ether.c: In function 'w90p910_ether_close': drivers/net/ethernet/nuvoton/w90p910_ether.c:580:2: error: implicit declaration of function 'free_irq'; did you mean 'free_uid'? [-Werror=implicit-function-declaration] Adding the correct include fixes the problem. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Nikolay Aleksandrov authored
Commit 8b426dc5 ("bonding: remove hardcoded value") changed the default value for tlb_dynamic_lb which lead to either broken ALB mode (since tlb_dynamic_lb can be changed only in TLB) or setting TLB mode with tlb_dynamic_lb equal to 0. The first issue was recently fixed by setting tlb_dynamic_lb to 1 always when switching to ALB mode, but the default value is still wrong and we'll enter TLB mode with tlb_dynamic_lb equal to 0 if the mode is changed via netlink or sysfs. In order to restore the previous behaviour and default value simply remove the mode check around the default param initialization for tlb_dynamic_lb which will always set it to 1 as before. Fixes: 8b426dc5 ("bonding: remove hardcoded value") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Haishuang Yan authored
In collect_md mode, if the tun dev is down, it still can call __ip6_tnl_rcv to receive on packets, and the rx statistics increase improperly. When the md tunnel is down, it's not neccessary to increase RX drops for the tunnel device, packets would be recieved on fallback tunnel, and the RX drops on fallback device will be increased as expected. Fixes: 8d79266b ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Cc: Alexei Starovoitov <ast@fb.com> Signed-off-by:
Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by:
-
Haishuang Yan authored
In collect_md mode, if the tun dev is down, it still can call ip_tunnel_rcv to receive on packets, and the rx statistics increase improperly. When the md tunnel is down, it's not neccessary to increase RX drops for the tunnel device, packets would be recieved on fallback tunnel, and the RX drops on fallback device will be increased as expected. Fixes: 2e15ea39 ("ip_gre: Add support to collect tunnel metadata.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Yuval Mintz authored
When removing the offloading of mirred actions under matchall classifiers, mlxsw would find the destination port associated with the offloaded action and utilize it for undoing the configuration. Depending on the order by which ports are removed, it's possible that the destination port would get removed before the source port. In such a scenario, when actions would be flushed for the source port mlxsw would perform an illegal dereference as the destination port is no longer listed. Since the only item necessary for undoing the configuration on the destination side is the port-id and that in turn is already maintained by mlxsw on the source-port, simply stop trying to access the destination port and use the port-id directly instead. Fixes: 763b4b70 ("mlxsw: spectrum: Add support in matchall mirror TC offloading") Signed-off-by:
Yuval Mintz <yuvalm@mellanox.com> Signed-off-by:
-
David S. Miller authored
Cong Wang says: ==================== net_sched: fix filter chain reference counting This patchset fixes tc filter chain reference counting and nasty race conditions with RCU callbacks. Please see each patch for details. v3: Rebase on the latest -net Add code comment in patch 1 Improve comment and changelog for patch 2 Add patch 3 v2: Add patch 1 Get rid of more ugly code in patch 2 ==================== Signed-off-by: -
Cong Wang authored
As pointed out by Jiri, there is still a race condition between tcf_block_put() and tcf_chain_destroy() in a RCU callback. There is no way to make it correct without proper locking or synchronization, because both operate on a shared list. Locking is hard, because the only lock we can pick here is a spinlock, however, in tc_dump_tfilter() we iterate this list with a sleeping function called (tcf_chain_dump()), which makes using a lock to protect chain_list almost impossible. Jiri suggested the idea of holding a refcnt before flushing, this works because it guarantees us there would be no parallel tcf_chain_destroy() during the loop, therefore the race condition is gone. But we have to be very careful with proper synchronization with RCU callbacks. Suggested-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
-
Cong Wang authored
This patch fixes the following ugliness of tc filter chain refcnt: a) tp proto should hold a refcnt to the chain too. This significantly simplifies the logic. b) Chain 0 is no longer special, it is created with refcnt=1 like any other chains. All the ugliness in tcf_chain_put() can be gone! c) No need to handle the flushing oddly, because block still holds chain 0, it can not be released, this guarantees block is the last user. d) The race condition with RCU callbacks is easier to handle with just a rcu_barrier(). Much easier to understand, nothing to hide. Thanks to the previous patch. Please see also the comments in code. e) Make the code understandable by humans, much less error-prone. Fixes: 744a4cf6 ("net: sched: fix use after free when tcf_chain_destroy is called multiple times") Fixes: 5bc17018 ("net: sched: introduce multichain support for filters") Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Cong Wang authored
gen estimator has been rewritten in commit 1c0d32fd ("net_sched: gen_estimator: complete rewrite of rate estimators"), the caller is no longer needed to wait for a grace period. So this patch gets rid of it. This also completely closes a race condition between action free path and filter chain add/remove path for the following patch. Because otherwise the nested RCU callback can't be caught by rcu_barrier(). Please see also the comments in code. Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
Back in linux-4.4, I inadvertently put a call to reqsk_put() in inet_child_forget(), forgetting it could be called from two different points. In the case it is called from inet_csk_reqsk_queue_add(), we want to keep the reference on the request socket, since it is released later by the caller (tcp_v{4|6}_rcv()) This bug never showed up because atomic_dec_and_test() was not signaling the underflow, and SLAB_DESTROY_BY RCU semantic for request sockets prevented the request to be put in quarantine. Recent conversion of socket refcount from atomic_t to refcount_t finally exposed the bug. So move the reqsk_put() to inet_csk_listen_stop() to fix this. Thanks to Shankara Pailoor for using syzkaller and providing a nice set of .config and C repro. WARNING: CPU: 2 PID: 4277 at lib/refcount.c:186 refcount_sub_and_test+0x167/0x1b0 lib/refcount.c:186 Kernel panic - not syncing: panic_on_warn set ... CPU: 2 PID: 4277 Comm: syz-executor0 Not tainted 4.13.0-rc7 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0xf7/0x1aa lib/dump_stack.c:52 panic+0x1ae/0x3a7 kernel/panic.c:180 __warn+0x1c4/0x1d9 kernel/panic.c:541 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190 do_trap_no_signal arch/x86/kernel/traps.c:224 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:273 do_error_trap+0x118/0x340 arch/x86/kernel/traps.c:310 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:846 RIP: 0010:refcount_sub_and_test+0x167/0x1b0 lib/refcount.c:186 RSP: 0018:ffff88006e006b60 EFLAGS: 00010286 RAX: 0000000000000026 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000026 RSI: 1ffff1000dc00d2c RDI: ffffed000dc00d60 RBP: ffff88006e006bf0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff1000dc00d6d R13: 00000000ffffffff R14: 0000000000000001 R15: ffff88006ce9d340 refcount_dec_and_test+0x1a/0x20 lib/refcount.c:211 reqsk_put+0x71/0x2b0 include/net/request_sock.h:123 tcp_v4_rcv+0x259e/0x2e20 net/ipv4/tcp_ipv4.c:1729 ip_local_deliver_finish+0x2e2/0xba0 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:248 [inline] ip_local_deliver+0x1ce/0x6d0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:477 [inline] ip_rcv_finish+0x8db/0x19c0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:248 [inline] ip_rcv+0xc3f/0x17d0 net/ipv4/ip_input.c:488 __netif_receive_skb_core+0x1fb7/0x31f0 net/core/dev.c:4298 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4336 process_backlog+0x1c5/0x6d0 net/core/dev.c:5102 napi_poll net/core/dev.c:5499 [inline] net_rx_action+0x6d3/0x14a0 net/core/dev.c:5565 __do_softirq+0x2cb/0xb2d kernel/softirq.c:284 do_softirq_own_stack+0x1c/0x30 arch/x86/entry/entry_64.S:898 </IRQ> do_softirq.part.16+0x63/0x80 kernel/softirq.c:328 do_softirq kernel/softirq.c:176 [inline] __local_bh_enable_ip+0x84/0x90 kernel/softirq.c:181 local_bh_enable include/linux/bottom_half.h:31 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:705 [inline] ip_finish_output2+0x8ad/0x1360 net/ipv4/ip_output.c:231 ip_finish_output+0x74e/0xb80 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:237 [inline] ip_output+0x1cc/0x850 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:471 [inline] ip_local_out+0x95/0x160 net/ipv4/ip_output.c:124 ip_queue_xmit+0x8c6/0x1810 net/ipv4/ip_output.c:504 tcp_transmit_skb+0x1963/0x3320 net/ipv4/tcp_output.c:1123 tcp_send_ack.part.35+0x38c/0x620 net/ipv4/tcp_output.c:3575 tcp_send_ack+0x49/0x60 net/ipv4/tcp_output.c:3545 tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:5795 [inline] tcp_rcv_state_process+0x4876/0x4b60 net/ipv4/tcp_input.c:5930 tcp_v4_do_rcv+0x58a/0x820 net/ipv4/tcp_ipv4.c:1483 sk_backlog_rcv include/net/sock.h:907 [inline] __release_sock+0x124/0x360 net/core/sock.c:2223 release_sock+0xa4/0x2a0 net/core/sock.c:2715 inet_wait_for_connect net/ipv4/af_inet.c:557 [inline] __inet_stream_connect+0x671/0xf00 net/ipv4/af_inet.c:643 inet_stream_connect+0x58/0xa0 net/ipv4/af_inet.c:682 SYSC_connect+0x204/0x470 net/socket.c:1628 SyS_connect+0x24/0x30 net/socket.c:1609 entry_SYSCALL_64_fastpath+0x18/0xad RIP: 0033:0x451e59 RSP: 002b:00007f474843fc08 EFLAGS: 00000216 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 0000000000451e59 RDX: 0000000000000010 RSI: 0000000020002000 RDI: 0000000000000007 RBP: 0000000000000046 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 0000000000000000 R13: 00007ffc040a0f8f R14: 00007f47484409c0 R15: 0000000000000000 Fixes: ebb516af ("tcp/dccp: fix race at listener dismantle phase") Signed-off-by:Eric Dumazet <edumazet@google.com> Reported-by:
Shankara Pailoor <sp3485@columbia.edu> Tested-by:
-
Christophe JAILLET authored
All other error handling paths in this function go through the 'error' label. This one should do the same. Fixes: 9cc9a5cb ("datapath: Avoid using stack larger than 1024.") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
-
Nisar Sayed authored
Configure pause time to 0xffff when tx flow control enabled Set pause time to 0xffff in the pause frame to indicate the partner to stop sending the packets. When RX buffer frees up, the device sends pause frame with pause time zero for partner to resume transmission. Fixes: 2f7ca802 ("Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver") Signed-off-by:
Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by:
-
- 11 Sep, 2017 8 commits
-
-
Josh Hunt authored
Fixes sparse warning about pointer in gen_handle: net/sched/cls_rsvp.h:392:40: warning: Using plain integer as NULL pointer Fixes: 8113c095 ("net_sched: use void pointer for filter handle") Signed-off-by:
Josh Hunt <johunt@akamai.com> Acked-by:
-
David Lebrun authored
As seg6_validate_srh() already checks that the Routing Header type is correct, it is not necessary to do it again in get_srh(). Fixes: 5829d70b ("ipv6: sr: fix get_srh() to comply with IPv6 standard "RFC 8200") Signed-off-by:
David Lebrun <dlebrun@google.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
Using bpf_redirect_map is allowed for generic XDP programs, but the appropriate map lookup was never performed in xdp_do_generic_redirect(). Instead the map-index is directly used as the ifindex. For the xdp_redirect_map sample in SKB-mode '-S', this resulted in trying sending on ifindex 0 which isn't valid, resulting in getting SKB packets dropped. Thus, the reported performance numbers are wrong in commit 24251c26 ("samples/bpf: add option for native and skb mode for redirect apps") for the 'xdp_redirect_map -S' case. Before commit 109980b8 ("bpf: don't select potentially stale ri->map from buggy xdp progs") it could crash the kernel. Like this commit also check that the map_owner owner is correct before dereferencing the map pointer. But make sure that this API misusage can be caught by a tracepoint. Thus, allowing userspace via tracepoints to detect misbehaving bpf_progs. Fixes: 6103aa96 ("net: implement XDP_REDIRECT for xdp generic") Fixes: 24251c26 ("samples/bpf: add option for native and skb mode for redirect apps") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Yonghong Song authored
clang does not support variable length array for structure member. It has the following error during compilation: kernel/trace/trace_syscalls.c:568:17: error: fields must have a constant size: 'variable length array in structure' extension will never be supported unsigned long args[sys_data->nb_args]; ^ The fix is to use a fixed array length instead. Reported-by:Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
-
Kosuke Tatsukawa authored
Commit cbf5ecb3 ("net: bonding: Fix transmit load balancing in balance-alb mode") tried to fix transmit dynamic load balancing in balance-alb mode, which wasn't working after commit 8b426dc5 ("bonding: remove hardcoded value"). It turned out that my previous patch only fixed the case when balance-alb was specified as bonding module parameter, and not when balance-alb mode was set using /sys/class/net/*/bonding/mode (the most common usage). In the latter case, tlb_dynamic_lb was set up according to the default mode of the bonding interface, which happens to be balance-rr. This additional patch addresses this issue by setting up tlb_dynamic_lb to 1 if "mode" is set to balance-alb through the sysfs interface. I didn't add code to change tlb_balance_lb back to the default value for other modes, because "mode" is usually set up only once during initialization, and it's not worthwhile to change the static variable bonding_defaults in bond_main.c to a global variable just for this purpose. Commit 8b426dc5 also changes the value of tlb_dynamic_lb for balance-tlb mode if it is set up using the sysfs interface. I didn't change that behavior, because the value of tlb_balance_lb can be changed using the sysfs interface for balance-tlb, and I didn't like changing the default value back and forth for balance-tlb. As for balance-alb, /sys/class/net/*/bonding/tlb_balance_lb cannot be written to. However, I think balance-alb with tlb_dynamic_lb set to 0 is not an intended usage, so there is little use making it writable at this moment. Fixes: 8b426dc5 ("bonding: remove hardcoded value") Reported-by:
Reinis Rozitis <r@roze.lv> Signed-off-by:
Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Cc: stable@vger.kernel.org # v4.12+ Acked-by:
-
Stephen Hemminger authored
Only need to wakeup the initiator after all sub-channels are opened. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Stephen Hemminger authored
When a virtual device is added dynamically (via host console), then the vmbus sends an offer message for the primary channel. The processing of this message for networking causes the network device to then initialize the sub channels. The problem is that setting up the sub channels needs to wait until the subsequent subchannel offers have been processed. These offers come in on the same ring buffer and work queue as where the primary offer is being processed; leading to a deadlock. This did not happen in older kernels, because the sub channel waiting logic was broken (it wasn't really waiting). The solution is to do the sub channel setup in its own work queue context that is scheduled by the primary channel setup; and then happens later. Fixes: 732e4985 ("netvsc: fix race on sub channel creation") Reported-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
-
Arkadi Sharshevsky authored
The current code does not handle correctly the access to the upper page in case of SFP/SFP+ EEPROM. In that case the offset should be local and the I2C address should be changed. Fixes: 2ea10903 ("mlxsw: spectrum: Add support for access cable info via ethtool") Reported-by:
Florian Klink <flokli@flokli.de> Signed-off-by:
Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
- 09 Sep, 2017 14 commits
-
-
Dan Carpenter authored
There is a typo here so we accidentally free "skb" instead of "skbn". It leads to a double free and a leak. After discussing with Subash, it's better to just move the check before the allocation and avoid the need to free. Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd updates from Bruce Fields: "More RDMA work and some op-structure constification from Chuck Lever, and a small cleanup to our xdr encoding" * tag 'nfsd-4.14' of git://linux-nfs.org/~bfields/linux: svcrdma: Estimate Send Queue depth properly rdma core: Add rdma_rw_mr_payload() svcrdma: Limit RQ depth svcrdma: Populate tail iovec when receiving nfsd: Incoming xdr_bufs may have content in tail buffer svcrdma: Clean up svc_rdma_build_read_chunk() sunrpc: Const-ify struct sv_serv_ops nfsd: Const-ify NFSv4 encoding and decoding ops arrays sunrpc: Const-ify instances of struct svc_xprt_ops nfsd4: individual encoders no longer see error cases nfsd4: skip encoder in trivial error cases nfsd4: define ->op_release for compound ops nfsd4: opdesc will be useful outside nfs4proc.c nfsd4: move some nfsd4 op definitions to xdr4.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs updates from David Sterba: "The changes range through all types: cleanups, core chagnes, sanity checks, fixes, other user visible changes, detailed list below: - deprecated: user transaction ioctl - mount option ssd does not change allocation alignments - degraded read-write mount is allowed if all the raid profile constraints are met, now based on more accurate check - defrag: do not reset compression afterwards; the NOCOMPRESS flag can be now overriden by defrag - prep work for better extent reference tracking (related to the qgroup slowness with balance) - prep work for compression heuristics - memory allocation reductions (may help latencies on a loaded system) - better accounting for io waiting states - error handling improvements (removed BUGs) - added more sanity checks for shared refs - fix readdir vs pagefault deadlock under some circumstances - fix for 'no-hole' mode, certain combination of compressed and inline extents - send: fix emission of invalid clone operations - fixup file mode if setting acls fail - more fixes from fuzzing - oher cleanups" * 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (104 commits) btrfs: submit superblock io with REQ_META and REQ_PRIO btrfs: remove unnecessary memory barrier in btrfs_direct_IO btrfs: remove superfluous chunk_tree argument from btrfs_alloc_dev_extent btrfs: Remove chunk_objectid parameter of btrfs_alloc_dev_extent btrfs: pass fs_info to btrfs_del_root instead of tree_root Btrfs: add one more sanity check for shared ref type Btrfs: remove BUG_ON in __add_tree_block Btrfs: remove BUG() in add_data_reference Btrfs: remove BUG() in print_extent_item Btrfs: remove BUG() in btrfs_extent_inline_ref_size Btrfs: convert to use btrfs_get_extent_inline_ref_type Btrfs: add a helper to retrive extent inline ref type btrfs: scrub: simplify scrub worker initialization btrfs: scrub: clean up division in scrub_find_csum btrfs: scrub: clean up division in __scrub_mark_bitmap btrfs: scrub: use bool for flush_all_writes btrfs: preserve i_mode if __btrfs_set_acl() fails btrfs: Remove extraneous chunk_objectid variable btrfs: Remove chunk_objectid argument from btrfs_make_block_group btrfs: Remove extra parentheses from condition in copy_items() ... -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull followup block layer updates from Jens Axboe: "I ended up splitting the main pull request for this series into two, mainly because of clashes between NVMe fixes that went into 4.13 after the for-4.14 branches were split off. This pull request is mostly NVMe, but not exclusively. In detail, it contains: - Two pull request for NVMe changes from Christoph. Nothing new on the feature front, basically just fixes all over the map for the core bits, transport, rdma, etc. - Series from Bart, cleaning up various bits in the BFQ scheduler. - Series of bcache fixes, which has been lingering for a release or two. Coly sent this in, but patches from various people in this area. - Set of patches for BFQ from Paolo himself, updating both documentation and fixing some corner cases in performance. - Series from Omar, attempting to now get the 4k loop support correct. Our confidence level is higher this time. - Series from Shaohua for loop as well, improving O_DIRECT performance and fixing a use-after-free" * 'for-4.14/block-postmerge' of git://git.kernel.dk/linux-block: (74 commits) bcache: initialize dirty stripes in flash_dev_run() loop: set physical block size to logical block size bcache: fix bch_hprint crash and improve output bcache: Update continue_at() documentation bcache: silence static checker warning bcache: fix for gc and write-back race bcache: increase the number of open buckets bcache: Correct return value for sysfs attach errors bcache: correct cache_dirty_target in __update_writeback_rate() bcache: gc does not work when triggering by manual command bcache: Don't reinvent the wheel but use existing llist API bcache: do not subtract sectors_to_gc for bypassed IO bcache: fix sequential large write IO bypass bcache: Fix leak of bdev reference block/loop: remove unused field block/loop: fix use after free bfq: Use icq_to_bic() consistently bfq: Suppress compiler warnings about comparisons bfq: Check kstrtoul() return value bfq: Declare local functions static ... -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "The iwlwifi firmware compat fix is in here as well as some other stuff: 1) Fix request socket leak introduced by BPF deadlock fix, from Eric Dumazet. 2) Fix VLAN handling with TXQs in mac80211, from Johannes Berg. 3) Missing __qdisc_drop conversions in prio and qfq schedulers, from Gao Feng. 4) Use after free in netlink nlk groups handling, from Xin Long. 5) Handle MTU update properly in ipv6 gre tunnels, from Xin Long. 6) Fix leak of ipv6 fib tables on netns teardown, from Sabrina Dubroca with follow-on fix from Eric Dumazet. 7) Need RCU and preemption disabled during generic XDP data patch, from John Fastabend" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits) bpf: make error reporting in bpf_warn_invalid_xdp_action more clear Revert "mdio_bus: Remove unneeded gpiod NULL check" bpf: devmap, use cond_resched instead of cpu_relax bpf: add support for sockmap detach programs net: rcu lock and preempt disable missing around generic xdp bpf: don't select potentially stale ri->map from buggy xdp progs net: tulip: Constify tulip_tbl net: ethernet: ti: netcp_core: no need in netif_napi_del davicom: Display proper debug level up to 6 net: phy: sfp: rename dt properties to match the binding dt-binding: net: sfp binding documentation dt-bindings: add SFF vendor prefix dt-bindings: net: don't confuse with generic PHY property ip6_tunnel: fix setting hop_limit value for ipv6 tunnel ip_tunnel: fix setting ttl and tos value in collect_md mode ipv6: fix typo in fib6_net_exit() tcp: fix a request socket leak sctp: fix missing wake ups in some situations netfilter: xt_hashlimit: fix build error caused by 64bit division netfilter: xt_hashlimit: alloc hashtable with right size ... -
Linus Torvalds authored
Merge more updates from Andrew Morton: - most of the rest of MM - a small number of misc things - lib/ updates - checkpatch - autofs updates - ipc/ updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (126 commits) ipc: optimize semget/shmget/msgget for lots of keys ipc/sem: play nicer with large nsops allocations ipc/sem: drop sem_checkid helper ipc: convert kern_ipc_perm.refcount from atomic_t to refcount_t ipc: convert sem_undo_list.refcnt from atomic_t to refcount_t ipc: convert ipc_namespace.count from atomic_t to refcount_t kcov: support compat processes sh: defconfig: cleanup from old Kconfig options mn10300: defconfig: cleanup from old Kconfig options m32r: defconfig: cleanup from old Kconfig options drivers/pps: use surrounding "if PPS" to remove numerous dependency checks drivers/pps: aesthetic tweaks to PPS-related content cpumask: make cpumask_next() out-of-line kmod: move #ifdef CONFIG_MODULES wrapper to Makefile kmod: split off umh headers into its own file MAINTAINERS: clarify kmod is just a kernel module loader kmod: split out umh code into its own file test_kmod: flip INT checks to be consistent test_kmod: remove paranoid UINT_MAX check on uint range processing vfat: deduplicate hex2bin() ...
-
Linus Torvalds authored
I removed all the gperf use, but not the Makefile rules. Sam Ravnborg says I get bonus points for cleaning this up. I'll hold him to it. Requested-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Borkmann authored
Differ between illegal XDP action code and just driver unsupported one to provide better feedback when we throw a one-time warning here. Reason is that with 814abfab ("xdp: add bpf_redirect helper function") not all drivers support the new XDP return code yet and thus they will fall into their 'default' case when checking for return codes after program return, which then triggers a bpf_warn_invalid_xdp_action() stating that the return code is illegal, but from XDP perspective it's not. I decided not to place something like a XDP_ACT_MAX define into uapi i) given we don't have this either for all other program types, ii) future action codes could have further encoding there, which would render such define unsuitable and we wouldn't be able to rip it out again, and iii) we rarely add new action codes. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Florian Fainelli authored
This reverts commit 95b80bf3 ("mdio_bus: Remove unneeded gpiod NULL check"), this commit assumed that GPIOLIB checks for NULL descriptors, so it's safe to drop them, but it is not when CONFIG_GPIOLIB is disabled in the kernel. If we do call gpiod_set_value_cansleep() on a GPIO descriptor we will issue warnings coming from the inline stubs declared in include/linux/gpio/consumer.h. Fixes: 95b80bf3 ("mdio_bus: Remove unneeded gpiod NULL check") Reported-by:
Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
-
David S. Miller authored
John Fastabend says: ==================== net: Fixes for XDP/BPF The following fixes, UAPI updates, and small improvement, i. XDP needs to be called inside RCU with preempt disabled. ii. Not strictly a bug fix but we have an attach command in the sockmap UAPI already to avoid having a single kernel released with only the attach and not the detach I'm pushing this into net branch. Its early in the RC cycle so I think this is OK (not ideal but better than supporting a UAPI with a missing detach forever). iii. Final patch replace cpu_relax with cond_resched in devmap. ==================== Signed-off-by: -
John Fastabend authored
Be a bit more friendly about waiting for flush bits to complete. Replace the cpu_relax() with a cond_resched(). Suggested-by:
John Fastabend <john.fastabend@gmail.com> Acked-by:
-
John Fastabend authored
The bpf map sockmap supports adding programs via attach commands. This patch adds the detach command to keep the API symmetric and allow users to remove previously added programs. Otherwise the user would have to delete the map and re-add it to get in this state. This also adds a series of additional tests to capture detach operation and also attaching/detaching invalid prog types. API note: socks will run (or not run) programs depending on the state of the map at the time the sock is added. We do not for example walk the map and remove programs from previously attached socks. Acked-by:
-
John Fastabend authored
do_xdp_generic must be called inside rcu critical section with preempt disabled to ensure BPF programs are valid and per-cpu variables used for redirect operations are consistent. This patch ensures this is true and fixes the splat below. The netif_receive_skb_internal() code path is now broken into two rcu critical sections. I decided it was better to limit the preempt_enable/disable block to just the xdp static key portion and the fallout is more rcu_read_lock/unlock calls. Seems like the best option to me. [ 607.596901] ============================= [ 607.596906] WARNING: suspicious RCU usage [ 607.596912] 4.13.0-rc4+ #570 Not tainted [ 607.596917] ----------------------------- [ 607.596923] net/core/dev.c:3948 suspicious rcu_dereference_check() usage! [ 607.596927] [ 607.596927] other info that might help us debug this: [ 607.596927] [ 607.596933] [ 607.596933] rcu_scheduler_active = 2, debug_locks = 1 [ 607.596938] 2 locks held by pool/14624: [ 607.596943] #0: (rcu_read_lock_bh){......}, at: [<ffffffff95445ffd>] ip_finish_output2+0x14d/0x890 [ 607.596973] #1: (rcu_read_lock_bh){......}, at: [<ffffffff953c8e3a>] __dev_queue_xmit+0x14a/0xfd0 [ 607.597000] [ 607.597000] stack backtrace: [ 607.597006] CPU: 5 PID: 14624 Comm: pool Not tainted 4.13.0-rc4+ #570 [ 607.597011] Hardware name: Dell Inc. Precision Tower 5810/0HHV7N, BIOS A17 03/01/2017 [ 607.597016] Call Trace: [ 607.597027] dump_stack+0x67/0x92 [ 607.597040] lockdep_rcu_suspicious+0xdd/0x110 [ 607.597054] do_xdp_generic+0x313/0xa50 [ 607.597068] ? time_hardirqs_on+0x5b/0x150 [ 607.597076] ? mark_held_locks+0x6b/0xc0 [ 607.597088] ? netdev_pick_tx+0x150/0x150 [ 607.597117] netif_rx_internal+0x205/0x3f0 [ 607.597127] ? do_xdp_generic+0xa50/0xa50 [ 607.597144] ? lock_downgrade+0x2b0/0x2b0 [ 607.597158] ? __lock_is_held+0x93/0x100 [ 607.597187] netif_rx+0x119/0x190 [ 607.597202] loopback_xmit+0xfd/0x1b0 [ 607.597214] dev_hard_start_xmit+0x127/0x4e0 Fixes: d4455169 ("net: xdp: support xdp generic on virtual devices") Fixes: b5cdae32 ("net: Generic XDP") Acked-by: -
Daniel Borkmann authored
We can potentially run into a couple of issues with the XDP bpf_redirect_map() helper. The ri->map in the per CPU storage can become stale in several ways, mostly due to misuse, where we can then trigger a use after free on the map: i) prog A is calling bpf_redirect_map(), returning XDP_REDIRECT and running on a driver not supporting XDP_REDIRECT yet. The ri->map on that CPU becomes stale when the XDP program is unloaded on the driver, and a prog B loaded on a different driver which supports XDP_REDIRECT return code. prog B would have to omit calling to bpf_redirect_map() and just return XDP_REDIRECT, which would then access the freed map in xdp_do_redirect() since not cleared for that CPU. ii) prog A is calling bpf_redirect_map(), returning a code other than XDP_REDIRECT. prog A is then detached, which triggers release of the map. prog B is attached which, similarly as in i), would just return XDP_REDIRECT without having called bpf_redirect_map() and thus be accessing the freed map in xdp_do_redirect() since not cleared for that CPU. iii) prog A is attached to generic XDP, calling the bpf_redirect_map() helper and returning XDP_REDIRECT. xdp_do_generic_redirect() is currently not handling ri->map (will be fixed by Jesper), so it's not being reset. Later loading a e.g. native prog B which would, say, call bpf_xdp_redirect() and then returns XDP_REDIRECT would find in xdp_do_redirect() that a map was set and uses that causing use after free on map access. Fix thus needs to avoid accessing stale ri->map pointers, naive way would be to call a BPF function from drivers that just resets it to NULL for all XDP return codes but XDP_REDIRECT and including XDP_REDIRECT for drivers not supporting it yet (and let ri->map being handled in xdp_do_generic_redirect()). There is a less intrusive way w/o letting drivers call a reset for each BPF run. The verifier knows we're calling into bpf_xdp_redirect_map() helper, so it can do a small insn rewrite transparent to the prog itself in the sense that it fills R4 with a pointer to the own bpf_prog. We have that pointer at verification time anyway and R4 is allowed to be used as per calling convention we scratch R0 to R5 anyway, so they become inaccessible and program cannot read them prior to a write. Then, the helper would store the prog pointer in the current CPUs struct redirect_info. Later in xdp_do_*_redirect() we check whether the redirect_info's prog pointer is the same as passed xdp_prog pointer, and if that's the case then all good, since the prog holds a ref on the map anyway, so it is always valid at that point in time and must have a reference count of at least 1. If in the unlikely case they are not equal, it means we got a stale pointer, so we clear and bail out right there. Also do reset map and the owning prog in bpf_xdp_redirect(), so that bpf_xdp_redirect_map() and bpf_xdp_redirect() won't get mixed up, only the last call should take precedence. A tc bpf_redirect() doesn't use map anywhere yet, so no need to clear it there since never accessed in that layer. Note that in case the prog is released, and thus the map as well we're still under RCU read critical section at that time and have preemption disabled as well. Once we commit with the __dev_map_insert_ctx() from xdp_do_redirect_map() and set the map to ri->map_to_flush, we still wait for a xdp_do_flush_map() to finish in devmap dismantle time once flush_needed bit is set, so that is fine. Fixes: 97f91a7c ("bpf: add bpf_redirect_map helper routine") Reported-by:
-
