- 06 Nov, 2005 11 commits
-
-
Adrian Bunk authored
This patch creates a file airo.h containing prototypes of the global functions in airo.c used by airo_cs.c . If you got strange problems with either airo_cs devices or in any other completely unrelated part of the kernel shortly or long after a airo_cs device was detected by the kernel, this might have been caused by the fact that caller and callee disagreed regarding the size of the first argument to init_airo_card()... Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Chan authored
Some book keeping and a style fix. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Chan authored
Refine bnx2_poll() logic to write back the most up-to-date status tag when all work has been processed. This eliminates some occasional extra interrupts when a older status tag is written even though all work has been processed. The idea is to read the status tag just before exiting bnx2_poll() and then check again for any new work. If no new work is pending, the status tag written back will not generate any extra interrupt. This logic is similar to the changes David Miller did to tg3_poll(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Chan authored
Dynamically determine the shared memory location where eeprom parameters are stored instead of using a fixed location. Add speed reporting to management firmware. This allows management firmware to know the current speed without contending for MII registers. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Chan authored
Update bnx2 nvram code with support for 5708. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Chan authored
Update bnx2 firmware with support for 5708. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Chan authored
Add 5708 copper and serdes basic support, including 2.5 Gbps support on 5708 serdes. SPEED_2500 is also added to ethtool.h Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Daniel Drake authored
The last patch I sent in ("prism54: Free skb after disabling interrupts") included a redundant NULL assignment. Thanks to Herbert Xu for pointing it out. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Adrian Bunk authored
It seems dmascc_setup() is a leftover time before dmascc_init() was there. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Adrian Bunk authored
This patch contains the following possible cleanups: - make needlessly global code static - #if 0 the following unused global functions: - e1000_hw.c: e1000_mc_addr_list_update - e1000_hw.c: e1000_read_reg_io - e1000_hw.c: e1000_enable_pciex_master Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Adrian Bunk authored
This patch makes some needlessly global code static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 05 Nov, 2005 23 commits
-
-
Linus Torvalds authored
-
Matt Porter authored
Adds a phy_mask field to struct mii_bus and uses it. This field indicates each phy address to be ignored when probing the mdio bus. This support is needed for the fs_enet and ibm_emac drivers to be converted to the generic phy layer among other drivers. Many systems lock up on probing certain phy addresses or probing doesn't return 0xffff when nothing is found at the address. A new driver I'm working on also makes use of this mask. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Don Fry authored
Some boards using the 79c976 pcnet32 chip will hang the system if the ethtool --register-dump is performed with the device operational. The request to read bcr30 is retried by the PCI device infinitely without returning data, hanging the system. Tested ia32 and ppc64. Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Don Fry authored
This patch is a better fix for Allied Telesyn 2700/2701 FX boards than the change made in early January this year. It allows the user to select the speed/duplex via module_param, but if no selection is made, forces the speed to 100 FD. It fixes both Bugzilla bugs 2669 and 4551. Tested ia32 and ppc64 by myself, and by the originator of bug 2669. Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Don Fry authored
Display the name eth%d or pci_name() of device which fails to allocate memory. When changing ring size via ethtool, it also releases the lock before returning on error. Added comment that the caller of pcnet32_alloc_ring must call pcnet32_free_ring on error, to avoid leak. Tested ia32 by forcing allocation errors. Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Ravinandan Arakali authored
Hi, This patch provides updated documentation on the Neterion(S2io) driver. Please review the patch. Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Ananda Raju authored
Hi, This patch provides dynamic two buffer-mode and 3 buffer-mode options. Previously 2 buffer-mode was compilation option. Now with this patch applied one can load driver in 2 buffer-mode with module-load parameter ie. #insmod s2io.ko rx_ring_mode=2 This patch also provides 3 buffer-mode which provides header separation functionality. In 3 buffer-mode skb->data will have L2/L3/L4 headers and "skb_shinfo(skb)->frag_list->data" will have have L4 payload. one can load driver in 3 buffer-mode with same above module-load parameter ie. #insmod s2io.ko rx_ring_mode=3 Please review the patch. Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Gabriel A. Devenyi authored
fid is declared as a u32 (unsigned int), and then a few lines later, it is checked for a value < 0, which is clearly useless. In the two locations this function is used, in one it is *explicitly* given a negative number, which would be ignored with the current definition. Thanks to LinuxICC (http://linuxicc.sf.net). Signed-off-by: Gabriel A. Devenyi <ace@staticwave.ca> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Jeff Garzik authored
-
Tejun Heo authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Alan Stern authored
Currently the driver takes a reference only for requests coming by way of the gendisk, not for requests coming by way of the struct device or struct scsi_device. Such requests can arrive in the rescan, flush, and shutdown pathways. The patch also makes the scsi_disk keep a reference to the underlying scsi_device, and it erases the scsi_device's pointer to the scsi_disk when the scsi_device is removed (since the pointer should no longer be used). This resolves Bugzilla entry #5237. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Pierre Ossman authored
The printks that aren't for debugging should use the name of the controller, not the driver name. Multiple MMC controllers aren't that common today, but this is the right way to do things. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Pierre Ossman authored
There is a broken if clause in the wbsd driver that can cause the driver to try and configure the chip even though none is found. This results in i/o on invalid ports. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
James Bottomley authored
It looks like one of the ips patches was missing a closing brace in a function Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
James Bottomley authored
Conflicts in dec_esp.c (Thanks Bacchus), scsi_transport_iscsi.c and scsi_transport_fc.h Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Jeff Garzik authored
Use ata_pad_{alloc,free} in two drivers, to factor out common code. Add ata_pad_{alloc,free} to two other drivers, which needed the padding but had not been updated.
-
Jeff Garzik authored
-
Calin A. Culianu authored
This adds support for the Nvidia Geforce 7800 series of cards to the nvidiafb framebuffer driver. All it does is add the PCI device id for the 7800, 7800 GTX, 7800 GO, and 7800 GTX GO cards to the module device table for the nvidiafb.ko driver, so that nvidiafb.ko will actually work on these cards. I also added the relevant PCI device ids to linux/pci_ids.h I tested it on my 7800 GTX here and it works like a charm. I now can get framebuffer support on this card! Woo hoo!! Nothing like 200x75 text mode to make your eyes BLEED. ;) Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
- 04 Nov, 2005 6 commits
-
-
Paul Mackerras authored
We can't currently use asm-ppc/page.h in vmlinux.lds.S, so until we have a merged page.h, define PAGE_SIZE and KERNELBASE locally. Also gets rid of some dynamic executable cruft that we had for 32-bit. With -Ttext=$(KERNELBASE) this didn't cause any problem, but when we changed to putting . = KERNELBASE in the vmlinux.lds.S this cruft caused the text to get linked at 0xa0 instead of 0xc0000000. Oops. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
This also moves setup_cpu_maps to setup-common.c (calling it smp_setup_cpu_maps) and uses it on both 32-bit and 64-bit. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Chuck Lever authored
Fix some dprintk's so that NLM, NFS client, and RPC client compile cleanly if CONFIG_SYSCTL is disabled. Test plan: Compile kernel with CONFIG_NFS enabled and CONFIG_SYSCTL disabled. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
The sunrpc module should build properly even when CONFIG_SYSCTL is disabled. Reported by Jan-Benedict Glaw. Test plan: Compile kernel with CONFIG_NFS as a module and built-in, and CONFIG_SYSCTL enabled and disabled. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Now that we have a method of dealing with delegation recalls, actually enable the caching of posix and BSD locks. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Delegations allow us to cache posix and BSD locks, however when the delegation is recalled, we need to "flush the cache" and send the cached LOCK requests to the server. This patch sets up the mechanism for doing so. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-