Add the mailbox compatible for IPQ9574 SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Re-organize the compatible devices and add a comment to avoid unneeded
of_device_id growth with every new SoC.  These devices have quite a lot
of similarities and they can use only one compatible fallback for driver
binding.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Rework the compatibles of IPQ8074, SC7180, SC8180X and SM8150 as
compatible devices (same from Linux driver point of view).  This allows
smaller of_device_id table in the Linux driver and smaller
allOf:if:then: constraints.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Add a compatible string for the MT6795 Helio X10 SoC using MT8173
binding and add a header for the MT6795's GCE mailbox.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the
use of such symbols on other architectures, convert the Microchip FPGA
mailbox driver to use the new symbol.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).

  drivers/mailbox/bcm-pdc-mailbox.c:1474:34: error: ‘pdc_mbox_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).

  drivers/mailbox/rockchip-mailbox.c:158:34: error: ‘rockchip_mbox_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

If a user can make copy_from_user() fail, there is a potential for
UAF/DF due to a lack of locking around the allocation, use and freeing
of the data buffers.

This issue is not theoretical.  I managed to author a POC for it:

    BUG: KASAN: double-free in kfree+0x5c/0xac
    Free of addr ffff29280be5de00 by task poc/356
    CPU: 1 PID: 356 Comm: poc Not tainted 6.1.0-00001-g961aa6552c04-dirty #20
    Hardware name: linux,dummy-virt (DT)
    Call trace:
     dump_backtrace.part.0+0xe0/0xf0
     show_stack+0x18/0x40
     dump_stack_lvl+0x64/0x80
     print_report+0x188/0x48c
     kasan_report_invalid_free+0xa0/0xc0
     ____kasan_slab_free+0x174/0x1b0
     __kasan_slab_free+0x18/0x24
     __kmem_cache_free+0x130/0x2e0
     kfree+0x5c/0xac
     mbox_test_message_write+0x208/0x29c
     full_proxy_write+0x90/0xf0
     vfs_write+0x154/0x440
     ksys_write+0xcc/0x180
     __arm64_sys_write+0x44/0x60
     invoke_syscall+0x60/0x190
     el0_svc_common.constprop.0+0x7c/0x160
     do_el0_svc+0x40/0xf0
     el0_svc+0x2c/0x6c
     el0t_64_sync_handler+0xf4/0x120
     el0t_64_sync+0x18c/0x190

    Allocated by task 356:
     kasan_save_stack+0x3c/0x70
     kasan_set_track+0x2c/0x40
     kasan_save_alloc_info+0x24/0x34
     __kasan_kmalloc+0xb8/0xc0
     kmalloc_trace+0x58/0x70
     mbox_test_message_write+0x6c/0x29c
     full_proxy_write+0x90/0xf0
     vfs_write+0x154/0x440
     ksys_write+0xcc/0x180
     __arm64_sys_write+0x44/0x60
     invoke_syscall+0x60/0x190
     el0_svc_common.constprop.0+0x7c/0x160
     do_el0_svc+0x40/0xf0
     el0_svc+0x2c/0x6c
     el0t_64_sync_handler+0xf4/0x120
     el0t_64_sync+0x18c/0x190

    Freed by task 357:
     kasan_save_stack+0x3c/0x70
     kasan_set_track+0x2c/0x40
     kasan_save_free_info+0x38/0x5c
     ____kasan_slab_free+0x13c/0x1b0
     __kasan_slab_free+0x18/0x24
     __kmem_cache_free+0x130/0x2e0
     kfree+0x5c/0xac
     mbox_test_message_write+0x208/0x29c
     full_proxy_write+0x90/0xf0
     vfs_write+0x154/0x440
     ksys_write+0xcc/0x180
     __arm64_sys_write+0x44/0x60
     invoke_syscall+0x60/0x190
     el0_svc_common.constprop.0+0x7c/0x160
     do_el0_svc+0x40/0xf0
     el0_svc+0x2c/0x6c
     el0t_64_sync_handler+0xf4/0x120
     el0t_64_sync+0x18c/0x190
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Presently the support appears to be implied.
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Use generic mbox_bind_client() to bind omap mailbox channel to a client.

mbox_bind_client is identical to the replaced lines, except that it:
 - Does the operation under con_mutex which prevents possible races in
   removal path
 - Sets TXDONE_BY_ACK if pcc uses TXDONE_BY_POLL and the client knows
   when tx is done. TXDONE_BY_ACK is already set if there's no interrupt,
   so this is not applicable.
 - Calls chan->mbox->ops->startup. This is usecase for requesting irq:
   move the devm_request_irq into the startup callback and unregister it
   in the shutdown path.
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Use generic mbox_bind_client() to bind omap mailbox channel to a client.

mbox_bind_client is identical to the replaced lines, except that it:
 - Does the operation under con_mutex which prevents possible races in
   removal path
 - Sets TXDONE_BY_ACK if omap uses TXDONE_BY_POLL. omap uses
   TXDONE_BY_IRQ, so this check is not applicable.
 - Calls chan->mbox->ops->startup, if available. omap doesn't have, so
   this is not applicable.
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Support virtual mailbox controllers and clients which are not platform
devices or come from the devicetree by allowing them to match client to
channel via some other mechanism.

Tested-by: Sudeep Holla <sudeep.holla@arm.com> (pcc)
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Pull scheduler fix from Borislav Petkov:

 - Do not pull tasks to the local scheduling group if its average load
   is higher than the average system load

* tag 'sched_urgent_for_v6.3_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix imbalance overflow

Pull x86 fix from Borislav Petkov:

 - Drop __init annotation from two rtc functions which get called after
   boot is done, in order to prevent a crash

* tag 'x86_urgent_for_v6.3_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/rtc: Remove __init for runtime functions

Pull powerpc fix from Michael Ellerman:

 - A fix for NUMA distance handling in the pseries SCM (pmem) driver.

   Thanks to Aneesh Kumar K.V.

* tag 'powerpc-6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/papr_scm: Update the NUMA distance table for the target node

Merge tag 'kbuild-fixes-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Drop debug info from purgatory objects again

 - Document that kernel.org provides prebuilt LLVM toolchains

 - Give up handling untracked files for source package builds

 - Avoid creating corrupted cpio when KBUILD_BUILD_TIMESTAMP is given
   with a pre-epoch data.

 - Change panic_show_mem() to a macro to handle variable-length argument

 - Compress tarballs on-the-fly again

* tag 'kbuild-fixes-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: do not create intermediate *.tar for tar packages
  kbuild: do not create intermediate *.tar for source tarballs
  kbuild: merge cmd_archive_linux and cmd_archive_perf
  init/initramfs: Fix argument forwarding to panic() in panic_show_mem()
  initramfs: Check negative timestamp to prevent broken cpio archive
  kbuild: give up untracked files for source package builds
  Documentation/llvm: Add a note about prebuilt kernel.org toolchains
  purgatory: fix disabling debug info

Pull ksmbd server fix from Steve French:
 "smb311 server preauth integrity negotiate context parsing fix (check
  for out of bounds access)"

* tag '6.3-rc6-ksmbd-server-fix' of git://git.samba.org/ksmbd:
  ksmbd: avoid out of bounds access in decode_preauth_ctxt()

Commit 05e96e96 ("kbuild: use git-archive for source package
creation") split the compression as a separate step to factor out
the common build rules.

With the previous commit, we got back to the situation where source
tarballs are compressed on-the-fly.
There is no reason to keep the separate compression rules.

Generate the comressed tar packages directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>

Since commit 05e96e96 ("kbuild: use git-archive for source package
creation"), a source tarball is created in two steps; create *.tar file
then compress it. I split the compression as a separate rule because I
just thought 'git archive' supported only gzip.

For other compression algorithms, I could pipe the two commands:

  $ git archive HEAD | xz > linux.tar.xz

I read git-archive(1) carefully, and I realized GIT had provided a
more elegant way:

  $ git -c tar.tar.xz.command=xz archive -o linux.tar.xz HEAD

This commit uses 'tar.tar.*.command' configuration to specify the
compression backend so we can compress a source tarball on-the-fly.

GIT commit 767cf4579f0e ("archive: implement configurable tar filters")
is more than a decade old, so it should be available on almost all build
environments.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>

The two commands, cmd_archive_linux and cmd_archive_perf, are similar.
Merge them to make it easier to add more changes to the git-archive
command.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>

Forwarding variadic argument lists can't be done by passing a va_list
to a function with signature foo(...) (as panic() has). It ends up
interpreting the va_list itself as a single argument instead of
iterating it. printf() happily accepts it of course, leading to corrupt
output.

Convert panic_show_mem() to a macro to allow forwarding the arguments.
The function is trivial enough that it's easier than trying to introduce
a vpanic() variant.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Similar to commit 4c9d410f ("initramfs: Check timestamp to prevent
broken cpio archive"), except asserts that the timestamp is
non-negative. This can happen when the KBUILD_BUILD_TIMESTAMP is a value
before UNIX epoch, which may be set when making reproducible builds that
don't want to look like they use a valid date.

While support for dates before 1970 might not be supported, this is more
about preventing undetected CPIO corruption. The printf's use a minimum
length format specifier, and will happily make the field longer than 8
characters if they need to.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Tested-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull cifs fix from Steve French:
 "Small client fix for better checking for smb311 negotiate context
  overflows, also marked for stable"

* tag '6.3-rc6-smb311-client-negcontext-fix' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix negotiate context parsing

Pull UBI fixes from Richard Weinberger:

 - Fix failure to attach when vid_hdr offset equals the (sub)page size

 - Fix for a deadlock in UBI's worker thread

* tag 'ubifs-for-linus-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubi: Fix failure attaching when vid_hdr offset equals to (sub)page size
  ubi: Fix deadlock caused by recursively holding work_sem

smb311_decode_neg_context() doesn't properly check against SMB packet
boundaries prior to accessing individual negotiate context entries. This
is due to the length check omitting the eight byte smb2_neg_context
header, as well as incorrect decrementing of len_of_ctxts.

Fixes: 5100d8a3 ("SMB311: Improve checking of negotiate security contexts")
Reported-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull i2c fixes from Wolfram Sang:
 "Just two driver fixes"

* tag 'i2c-for-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: ocores: generate stop condition after timeout in polling mode
  i2c: mchp-pci1xxxx: Update Timing registers

Pull SCSI fix from James Bottomley:
 "One small fix to SCSI Enclosure Services to fix a regression caused by
  another recent fix"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ses: Handle enclosure with just a primary component gracefully

Pull block fix from Jens Axboe:
 "A single NVMe quirk entry addition"

* tag 'block-6.3-2023-04-14' of git://git.kernel.dk/linux:
  nvme-pci: add NVME_QUIRK_BOGUS_NID for T-FORCE Z330 SSD

Pull io_uring fix from Jens Axboe:
 "Just a small tweak to when task_work needs redirection, marked for
  stable as well"

* tag 'io_uring-6.3-2023-04-14' of git://git.kernel.dk/linux:
  io_uring: complete request via task work in case of DEFER_TASKRUN

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix for a missing fence when generating the NOMMU sigreturn
   trampoline

 - A set of fixes for early DTB handling of reserved memory nodes

* tag 'riscv-for-linus-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: No need to relocate the dtb as it lies in the fixmap region
  riscv: Do not set initial_boot_params to the linear address of the dtb
  riscv: Move early dtb mapping into the fixmap region
  riscv: add icache flush for nommu sigreturn trampoline

Pull ACPI fixes from Rafael Wysocki:
 "These add two ACPI-related quirks:

   - Add a quirk to force StorageD3Enable on AMD Picasso systems (Mario
     Limonciello)

   - Add an ACPI IRQ override quirk for ASUS ExpertBook B1502CBA (Paul
     Menzel)"

* tag 'acpi-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: resource: Skip IRQ override on ASUS ExpertBook B1502CBA
  ACPI: x86: utils: Add Picasso to the list for forcing StorageD3Enable

Pull power management fix from Rafael Wysocki:
 "Make the amd-pstate cpufreq driver take all of the possible
  combinations of the 'old' and 'new' status values correctly while
  changing the operation mode via sysfs (Wyes Karny)"

* tag 'pm-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  amd-pstate: Fix amd_pstate mode switch

Pull thermal control fix from Rafael Wysocki:
 "Modify the Intel thermal throttling code to avoid updating unsupported
  status clearing mask bits which causes the kernel to complain about
  unchecked MSR access (Srinivas Pandruvada)"

* tag 'thermal-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel: Avoid updating unsupported THERM_STATUS_CLEAR mask bits

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes.

  At this time, quite a few fixes for the old PCI drivers are found.
  Although they are not regression fixes, I took these as they are
  materials for stable kernels.

  In addition, a couple of regression fixes and another couple of
  HD-audio quirks are included"

* tag 'sound-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/hdmi: disable KAE for Intel DG2
  ALSA: hda/realtek: Add quirks for Lenovo Z13/Z16 Gen2
  ALSA: hda: patch_realtek: add quirk for Asus N7601ZM
  ALSA: firewire-tascam: add missing unwind goto in snd_tscm_stream_start_duplex()
  ALSA: emu10k1: don't create old pass-through playback device on Audigy
  ALSA: emu10k1: fix capture interrupt handler unlinking
  ALSA: hda/sigmatel: fix S/PDIF out on Intel D*45* motherboards
  ALSA: hda/sigmatel: add pin overrides for Intel DP45SG motherboard
  ALSA: i2c/cs8427: fix iec958 mixer control deactivation

Pull rdma fixes from Jason Gunthorpe:
 "We had a fairly slow cycle on the rc side this time, here are the
  accumulated fixes, mostly in drivers:

   - irdma should not generate extra completions during flushing

   - Fix several memory leaks

   - Do not get confused in irdma's iwarp mode if IPv6 is present

   - Correct a link speed calculation in mlx5

   - Increase the EQ/WQ limits on erdma as they are too small for big
     applications

   - Use the right math for erdma's inline mtt feature

   - Make erdma probing more robust to boot time ordering differences

   - Fix a KMSAN crash in CMA due to uninitialized qkey"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/core: Fix GID entry ref leak when create_ah fails
  RDMA/cma: Allow UD qp_type to join multicast only
  RDMA/erdma: Defer probing if netdevice can not be found
  RDMA/erdma: Inline mtt entries into WQE if supported
  RDMA/erdma: Update default EQ depth to 4096 and max_send_wr to 8192
  RDMA/erdma: Fix some typos
  IB/mlx5: Add support for 400G_8X lane speed
  RDMA/irdma: Add ipv4 check to irdma_find_listener()
  RDMA/irdma: Increase iWARP CM default rexmit count
  RDMA/irdma: Fix memory leak of PBLE objects
  RDMA/irdma: Do not generate SW completions for NOPs

Merge a quirk to force StorageD3Enable on AMD Picasso systems (Mario
Limonciello).

* acpi-x86:
  ACPI: x86: utils: Add Picasso to the list for forcing StorageD3Enable

So far io_req_complete_post() only covers DEFER_TASKRUN by completing
request via task work when the request is completed from IOWQ.

However, uring command could be completed from any context, and if io
uring is setup with DEFER_TASKRUN, the command is required to be
completed from current context, otherwise wait on IORING_ENTER_GETEVENTS
can't be wakeup, and may hang forever.

The issue can be observed on removing ublk device, but turns out it is
one generic issue for uring command & DEFER_TASKRUN, so solve it in
io_uring core code.

Fixes: e6aeb272 ("io_uring: complete all requests in task context")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-block/b3fc9991-4c53-9218-a8cc-5b4dd3952108@kernel.dk/Reported-by: Jens Axboe <axboe@kernel.dk>
Cc: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull NVMe fix from Christoph.

* 'nvme-6.3' of git://git.infradead.org/nvme:
  nvme-pci: add NVME_QUIRK_BOGUS_NID for T-FORCE Z330 SSD