When PCIe port PM is not enabled (system BIOS is pre-2015 or the
pcie_port_pm=off parameter is set), legacy ATPX PM should still be
marked as supported. Otherwise the GPU can fail to power on after
runtime suspend. This affected a Dell Inspiron 5548.

Ideally the BIOS date in the PCI core is lowered to 2013 (the first year
where hybrid graphics platforms using power resources was introduced),
but that seems more risky at this point and would not solve the
pcie_port_pm=off issue.

v2: agd: fix typo

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98505Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org> # 4.8+
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

When PCIe port PM is not enabled (system BIOS is pre-2015 or the
pcie_port_pm=off parameter is set), legacy ATPX PM should still be
marked as supported. Otherwise the GPU can fail to power on after
runtime suspend. This affected a Dell Inspiron 5548.

Ideally the BIOS date in the PCI core is lowered to 2013 (the first year
where hybrid graphics platforms using power resources was introduced),
but that seems more risky at this point and would not solve the
pcie_port_pm=off issue.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98505Reported-and-tested-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org> # 4.8+
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

check array index first and then visit the array.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1,cleanup description/comments
2,for FIJI & passthrough, force post when smc fw version below 22.15
3,for other cases, follow regular rules
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Left over from an earlier rev of the patch.
Acked-by: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Colin King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

External clients which import our bo's wait only
for exclusive dmabuf-fences, not on shared ones,
ditto for bo's which we import from external
providers and write to.

Therefore attach exclusive fences on prime shared buffers
if our exported buffer gets imported by an external
client, or if we import a buffer from an external
exporter.

See discussion in thread:
https://lists.freedesktop.org/archives/dri-devel/2016-October/122370.html

Prime export tested on Intel iGPU + AMD Tonga dGPU as
DRI3/Present Prime render offload, and with the Tonga
standalone as primary gpu.

v2: Add a wait for all shared fences before prime export,
    as suggested by Christian Koenig.

v3: - Mark buffer prime_exported in amdgpu_gem_prime_pin,
    so we only use the exclusive fence when exporting a
    bo to external clients like a separate iGPU, but not
    when exporting/importing from/to ourselves as part of
    regular DRI3 fd passing.

    - Propagate failure of reservation_object_wait_rcu back
    to caller.

v4: - Switch to a prime_shared_count counter instead of a
      flag, which gets in/decremented on prime_pin/unpin, so
      we can switch back to shared fences if all clients
      detach from our exported bo.

    - Also switch to exclusive fence for prime imported bo's.

v5: - Drop lret, instead use int ret -> long ret, as proposed
      by Christian.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95472
Tested-by: Mike Lothian <mike@fireburn.co.uk> (v1)
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Cc: Christian König <christian.koenig@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Merge branch 'topic-arcpgu-fixes' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux into drm-fixes

* 'topic-arcpgu-fixes' of https://github.com/foss-for-synopsys-dwc-arc-processors/linux:
  drm/arcpgu: Accommodate adv7511 switch to DRM bridge

ARC PGU driver starts crashing on initialization after
'commit e12c2f64 ("drm/i2c: adv7511: Convert to drm_bridge")'
This happenes because in "arcpgu_drm_hdmi_init" function we get pointer
of "drm_i2c_encoder_driver" structure, which doesn't exist after
adv7511 hdmi encoder interface changed from slave encoder to drm bridge.
So, when we call "encoder_init" function from this structure driver
crashes.

Bootlog:
------------------------------------->8--------------------------------
[drm] Initialized drm 1.1.0 20060810
arcpgu e0017000.pgu: arc_pgu ID: 0xabbabaab
arcpgu e0017000.pgu: assigned reserved memory node frame_buffer@9e000000
Path: (null)
CPU: 0 PID: 1 Comm: swapper Not tainted 4.8.0-00001-gb5642252fa01-dirty #8
task: 9a058000 task.stack: 9a032000

[ECR   ]: 0x00220100 => Invalid Read @ 0x00000004 by insn @ 0x803934e8
[EFA   ]: 0x00000004
[BLINK ]: drm_atomic_helper_connector_dpms+0xa6/0x230
[ERET  ]: drm_atomic_helper_connector_dpms+0xa4/0x230
[STAT32]: 0x00000846 : K DE       E2 E1
BTA: 0x8016d949  SP: 0x9a033e34  FP: 0x00000000
LPS: 0x8036f6fc LPE: 0x8036f700 LPC: 0x00000000
r00: 0x8063c118 r01: 0x805b98ac r02: 0x00000b11
r03: 0x00000000 r04: 0x9a010f54 r05: 0x00000000
r06: 0x00000001 r07: 0x00000000 r08: 0x00000028
r09: 0x00000001 r10: 0x00000007 r11: 0x00000054
r12: 0x720a3033

Stack Trace:
  drm_atomic_helper_connector_dpms+0xa4/0x230
  arcpgu_drm_hdmi_init+0xbc/0x228
  arcpgu_probe+0x168/0x244
  platform_drv_probe+0x26/0x64
  really_probe+0x1f0/0x32c
  __driver_attach+0xa8/0xd0
  bus_for_each_dev+0x3c/0x74
  bus_add_driver+0xc2/0x184
  driver_register+0x50/0xec
  do_one_initcall+0x3a/0x120
  kernel_init_freeable+0x108/0x1a0
------------------------------------->8--------------------------------

Fix ARC PGU driver to be able work with drm bridge hdmi encoder
interface. The hdmi connector code isn't needed anymore as we expect
the adv7511 bridge driver to create/manage the connector.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

Yet another small batch of fixes. Two of the patches I had prepared
since quite some time, but they did not seem to affect operation in
a visible manner so far. Until recently, when I discovered the third
issue (disable planes before disabling CRTC), which made the two
previous fixes necessary.

* 'fixes-for-v4.9-rc5' of http://git.agner.ch/git/linux-drm-fsl-dcu:
  drm/fsl-dcu: disable planes before disabling CRTC
  drm/fsl-dcu: update all registers on flush
  drm/fsl-dcu: do not update when modifying irq registers

imx-drm: fix possible hangup when disabling crtcs

- only ever disable the display controller (DC) module after all plane
  IDMAC channels are stopped. This fixes a regression introduced by the
  atomic modeset conversion.

* tag 'imx-drm-fixes-2016-11-10' of git://git.pengutronix.de/git/pza/linux:
  drm/imx: disable planes before DC

 Regression fix for powerplay on some iceland boards.

* 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux:
  drm/amd/powerplay: implement get_clock_by_type for iceland.
  drm/amd/powerplay/smu7: fix checks in smu7_get_evv_voltages (v2)
  drm/amd/powerplay: update phm_get_voltage_evv_on_sclk for iceland
  drm/amd/powerplay: propagate errors in phm_get_voltage_evv_on_sclk

Thou shall not send control msg from the stack,
does that mean I can send it from the RO memory area?

and it looks like the answer is no, so here's
v2 which kmemdups.

Reported-by: poma
Tested-by: poma <poma@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

iceland use pptable v0.

bugs:
https://bugzilla.kernel.org/show_bug.cgi?id=185681
https://bugs.freedesktop.org/show_bug.cgi?id=98357Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Only check if the tables exist in relevant configs.  This
fixes a failure on V0 tables.

v2: fix version check as suggested by Rex

bugs:
https://bugzilla.kernel.org/show_bug.cgi?id=185681
https://bugs.freedesktop.org/show_bug.cgi?id=98357Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Was missing the handling for iceland.

bugs:
https://bugzilla.kernel.org/show_bug.cgi?id=185681
https://bugs.freedesktop.org/show_bug.cgi?id=98357Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Missing for one case.

bugs:
https://bugzilla.kernel.org/show_bug.cgi?id=185681
https://bugs.freedesktop.org/show_bug.cgi?id=98357Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

3 more amdgpu fixes.

* 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux:
  drm/amd/powerplay: return false instead of -EINVAL
  drm/amdgpu/powerplay/smu7: fix unintialized data usage
  drm/amdgpu: fix crash in acp_hw_fini

i915 fixes, include Sandybridge rendering regression fix.

* tag 'drm-intel-fixes-2016-11-09' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Limit Valleyview and earlier to only using mappable scanout
  drm/i915: Round tile chunks up for constructing partial VMAs
  drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms
  drm/i915/dp: BDW cdclk fix for DP audio
  drm/i915/vlv: Prevent enabling hpd polling in late suspend
  drm/i915: Respect alternate_ddc_pin for all DDI ports

If the DC clock is disabled before the attached IDMACs are properly
stopped the IDMACs may hang the IPU or even the whole system.

Make sure the IDMACs are in safe state by disabling the planes before
removal of the DC clock.

Also set the atomic parameter to false to stop calling the atomic_begin
hook, which does nothing useful as we immediately afterwards turn off
vblank interrupts and possibly send the pending vblank event.

Fixes: 33f14235 (drm/imx: atomic phase 1: Use transitional atomic
                     CRTC and plane helpers)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

After disabling and reenabling the CRTC the DCU sometimes got stuck
displaying the whole screen with a solid color. Disabling and
reenabling the CRTC did not recover from the situation. This was
often reproducable by just restarting the X-Server.

The disabling sequence is not explicitly documented. But it turns
out that disabling the planes before disabling the CRTC seems to
prevent the above situation from happening.

Use the callback ->atomic_disable instead of ->disable which allows
to use the drm_atomic_helper_disable_planes_on_crtc() helper to
disable planes before disabling the controller.
Signed-off-by: Stefan Agner <stefan@agner.ch>

Use the UPDATE_MODE READREG bit to initiate a register transfer
on flush. This makes sure that we flush all registers only once
for all planes.
Signed-off-by: Stefan Agner <stefan@agner.ch>

The IRQ status and mask registers are not "double buffered" according
to the reference manual. Hence, there is no extra transfer/update
write needed when modifying these registers.
Signed-off-by: Stefan Agner <stefan@agner.ch>

Returning -EINVAL from a bool-returning function
phm_check_smc_update_required_for_display_configuration has an unexpected
effect of returning true, which is probably not what was intended.
Replace -EINVAL by false.

The only place this function is called from is
psm_adjust_power_state_dynamic in
drivers/gpu/drm/amd/powerplay/eventmgr/psm.c:106:

	if (!equal || phm_check_smc_update_required_for_display_configuration(hwmgr)) {
		phm_apply_state_adjust_rules(hwmgr, requested, pcurrent);
		phm_set_power_state(hwmgr, &pcurrent->hardware, &requested->hardware);
		hwmgr->current_ps = requested;
	}

It seems to expect a boolean value here.

This issue has been found using the following Coccinelle semantic patch
written by Peter Senna Tschudin:
<smpl>
@@
identifier f;
constant C;
typedef bool;
@@
bool f (...){
<+...
* return -C;
...+>
}
</smpl>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrew Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

A recent bugfix replaced an out-of-bounds access with direct
use of unintialized data:

drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c: In function 'smu7_patch_limits_vddc':
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2033:6: error: 'vddc' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2146:11: note: 'vddc' was declared here
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2033:6: error: 'vddci' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2146:17: note: 'vddci' was declared here
  uint32_t vddc, vddci;

This initializes the data as before using the correct type.

Fixes: 77f7f71f ("drm/amdgpu/powerplay/smu7: fix static checker warning")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On CZ/ST systems with AZ rather than ACP audio, we need to bail
early in hw_fini since there is nothing to do.

bug: https://bugs.freedesktop.org/show_bug.cgi?id=98276Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Valleyview appears to be limited to only scanning out from the first 512MiB
of the Global GTT. Lets presume that this behaviour was inherited from the
display block copied from g4x (not Ironlake) and all earlier generations
are similarly affected, though testing suggests different symptoms. For
simplicity, impose that these platforms must scanout from the mappable
region. (For extra simplicity, use HAS_GMCH_DISPLAY even though this
catches Cherryview which does not appear to be limited to the low
aperture for its scanout.)

v2: Use HAS_GMCH_DISPLAY() to more clearly convey my intent about
limiting this workaround to the old style of display engine.

v3: Update changelog to reflect testing by Ville Syrjälä
v4: Include the changes to the comments as well
Reported-by: Luis Botello <luis.botello.ortega@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98036
Fixes: 2efb813d ("drm/i915: Fallback to using unmappable memory for scanout")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20161107110128.28762-1-chris@chris-wilson.co.ukReviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 767a222e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

When we split a large object up into chunks for GTT faulting (because we
can't fit the whole object into the aperture) we have to align our cuts
with the fence registers. Each partial VMA must cover a complete set of
tile rows or the offset into each partial VMA is not aligned with the
whole image. Currently we enforce a minimum size on each partial VMA,
but this minimum size itself was not aligned to the tile row causing
distortion.
Reported-by: Andreas Reis <andreas.reis@gmail.com>
Reported-by: Chris Clayton <chris2553@googlemail.com>
Reported-by: Norbert Preining <preining@logic.at>
Tested-by: Norbert Preining <preining@logic.at>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Fixes: 03af84fe ("drm/i915: Choose partial chunksize based on tile row size")
Fixes: a61007a8 ("drm/i915: Fix partial GGTT faulting") # enabling patch
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98402
Testcase: igt/gem_mmap_gtt/medium-copy-odd
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20161107105443.27855-1-chris@chris-wilson.co.ukReviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 0ef723cb)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.

Let's apply this work around to GEN9 platforms too, as it fixes the same
issue.

v2: Move drm_device to drm_i915_private conversion

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97907
Cc: stable@vger.kernel.org
Cc: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478117601-19122-1-git-send-email-dhinakaran.pandiyan@intel.com
(cherry picked from commit 9c754024)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.

From BSpec:
"Display» BDW-SKL» dpr» [Register] DP_TP_CTL [BDW+,EXCLUDE(CHV)]
Workaround : Do not use DisplayPort with CDCLK less than 432 MHz, audio
enabled, port width x4, and link rate HBR2 (5.4 GHz), or else there may
be audio corruption or screen corruption."

Since, some DP configurations (e.g., MST) use port width x4 and HBR2
link rate, let's increase the cdclk to >= 432 MHz to enable audio for those
cases.

v4: Changed commit message
v3: Combine BDW pixel rate adjustments into a function (Jani)
v2: Restrict fix to BDW
    Retain the set cdclk across modesets (Ville)
Cc: stable@vger.kernel.org
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478026080-2925-1-git-send-email-dhinakaran.pandiyan@intel.com

(cherry picked from commit b30ce9e0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

One of the CI machines began to run into issues with the hpd poller
suddenly waking up in the midst of the late suspend phase. It looks like
this is getting caused by the fact we now deinitialize power wells in
late suspend, which means that intel_hpd_poll_init() gets called in late
suspend causing polling to get re-enabled. So, when deinitializing power
wells on valleyview we now refrain from enabling polling in the midst of
suspend.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98040
Fixes: 19625e85 ("drm/i915: Enable polling when we don't have hpd")
Signed-off-by: Lyude <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Petry Latvala <petri.latvala@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477499769-1966-1-git-send-email-lyude@redhat.com
(cherry picked from commit b64b5409)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

The VBT provides the platform a way to mix and match the DDI ports vs.
GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose
has no standard GMBUS pin assignment. However, there are machines out
there that use a non-standard mapping for the other ports as well.
Let's start trusting the VBT on this one for all ports on DDI platforms.

I've structured the code such that other platforms could easily start
using this as well, by simply filling in the ddi_port_info. IIRC there
may be CHV system that might actually need this.

v2: Include a commit message, include a debug message during init

Cc: stable@vger.kernel.org
Cc: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-3-git-send-email-ville.syrjala@linux.intel.comReviewed-by: Jim Bride <jim.bride@linux.intel.com>
(cherry picked from commit e4ab73a1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Fixes for some msm issues

* 'msm-fixes-4.9' of git://people.freedesktop.org/~robclark/linux:
  drm/msm: Fix error handling crashes seen when VRAM allocation fails
  drm/msm/mdp5: 8x16 actually has 8 mixer stages
  drm/msm/mdp5: no scaling support on RGBn pipes for 8x16
  drm/msm/mdp5: handle non-fullscreen base plane case
  drm/msm: Set CLK_IGNORE_UNUSED flag for PLL clocks
  drm/msm/dsi: Queue HPD helper work in attach/detach callbacks

A few more fixes for 4.9.

* 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: add some error handling to amdgpu_init v2
  drm/amd: fix scheduler fence teardown order v2
  drm/amd/powerplay: don't succeed in getters if fan is missing
  drm/amdgpu: make sure ddc_bus is valid in connector unregister
  drm/radeon: Fix kernel panic on shutdown
  drm/amdgpu: disable runtime pm in certain cases
  drm/radeon: disable runtime pm in certain cases
  drm/amdgpu: add support for new smc firmware on iceland
  drm/amdgpu: add support for new smc firmware on tonga

Pull i2c fix from Wolfram Sang:
 "A bugfix for the I2C core fixing a (rare) race condition"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core: fix NULL pointer dereference under race condition

Merge branches 'sched-urgent-for-linus' and 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull stack vmap fixups from Thomas Gleixner:
 "Two small patches related to sched_show_task():

   - make sure to hold a reference on the task stack while accessing it

   - remove the thread_saved_pc printout

  .. and add a sanity check into release_task_stack() to catch problems
  with task stack references"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Remove pointless printout in sched_show_task()
  sched/core: Fix oops in sched_show_task()

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  fork: Add task stack refcounting sanity check and prevent premature task stack freeing

Pull MD fixes from Shaohua Li:
 "There are several bug fixes queued:

   - fix raid5-cache recovery bugs

   - fix discard IO error handling for raid1/10

   - fix array sync writes bogus position to superblock

   - fix IO error handling for raid array with external metadata"

* tag 'md/4.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md: be careful not lot leak internal curr_resync value into metadata. -- (all)
  raid1: handle read error also in readonly mode
  raid5-cache: correct condition for empty metadata write
  md: report 'write_pending' state when array in sync
  md/raid5: write an empty meta-block when creating log super-block
  md/raid5: initialize next_checkpoint field before use
  RAID10: ignore discard error
  RAID1: ignore discard error

Pull SCSI fixes from James Bottomley:
 "Two more important data integrity fixes related to RAID device drivers
  which wrongly throw away the SYNCHRONIZE CACHE command in the non-RAID
  path and a memory leak in the scsi_debug driver"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: arcmsr: Send SYNCHRONIZE_CACHE command to firmware
  scsi: scsi_debug: Fix memory leak if LBP enabled and module is unloaded
  scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices

Pull input subsystem updates from Dmitry Torokhov.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: psmouse - cleanup Focaltech code
  Input: i8042 - add XMG C504 to keyboard reset table

Pull FireWire (IEEE 1394) fixes from Stefan Richter:

 - add missing input validation to the firewire-net driver. Invalid
   IP-over-1394 encapsulation headers could trigger buffer overflows
   (CVE 2016-8633).

 - IP-over-1394 link fragmentation headers were read and written
   incorrectly, breaking fragmented RX/TX with other OS's stacks.

* tag 'firewire-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: net: fix fragmented datagram_size off-by-one
  firewire: net: guard against rx buffer overflows