Add fexit tests for BPF trampoline that checks kernel functions
with up to 6 arguments of different sizes and their return values.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-11-ast@kernel.org

Add sanity test for BPF trampoline that checks kernel functions
with up to 6 arguments of different sizes.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-10-ast@kernel.org

Add few kernel functions with various number of arguments,
their types and sizes for BPF trampoline testing to cover
different calling conventions.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-9-ast@kernel.org

Add simple test for fentry and fexit programs around eth_type_trans.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-8-ast@kernel.org

Teach libbpf to recognize tracing programs types and attach them to
fentry/fexit.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-7-ast@kernel.org

Introduce btf__find_by_name_kind() helper to search BTF by name and kind, since
name alone can be ambiguous.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-6-ast@kernel.org

Introduce BPF trampoline concept to allow kernel code to call into BPF programs
with practically zero overhead.  The trampoline generation logic is
architecture dependent.  It's converting native calling convention into BPF
calling convention.  BPF ISA is 64-bit (even on 32-bit architectures). The
registers R1 to R5 are used to pass arguments into BPF functions. The main BPF
program accepts only single argument "ctx" in R1. Whereas CPU native calling
convention is different. x86-64 is passing first 6 arguments in registers
and the rest on the stack. x86-32 is passing first 3 arguments in registers.
sparc64 is passing first 6 in registers. And so on.

The trampolines between BPF and kernel already exist.  BPF_CALL_x macros in
include/linux/filter.h statically compile trampolines from BPF into kernel
helpers. They convert up to five u64 arguments into kernel C pointers and
integers. On 64-bit architectures this BPF_to_kernel trampolines are nops. On
32-bit architecture they're meaningful.

The opposite job kernel_to_BPF trampolines is done by CAST_TO_U64 macros and
__bpf_trace_##call() shim functions in include/trace/bpf_probe.h. They convert
kernel function arguments into array of u64s that BPF program consumes via
R1=ctx pointer.

This patch set is doing the same job as __bpf_trace_##call() static
trampolines, but dynamically for any kernel function. There are ~22k global
kernel functions that are attachable via nop at function entry. The function
arguments and types are described in BTF.  The job of btf_distill_func_proto()
function is to extract useful information from BTF into "function model" that
architecture dependent trampoline generators will use to generate assembly code
to cast kernel function arguments into array of u64s.  For example the kernel
function eth_type_trans has two pointers. They will be casted to u64 and stored
into stack of generated trampoline. The pointer to that stack space will be
passed into BPF program in R1. On x86-64 such generated trampoline will consume
16 bytes of stack and two stores of %rdi and %rsi into stack. The verifier will
make sure that only two u64 are accessed read-only by BPF program. The verifier
will also recognize the precise type of the pointers being accessed and will
not allow typecasting of the pointer to a different type within BPF program.

The tracing use case in the datacenter demonstrated that certain key kernel
functions have (like tcp_retransmit_skb) have 2 or more kprobes that are always
active.  Other functions have both kprobe and kretprobe.  So it is essential to
keep both kernel code and BPF programs executing at maximum speed. Hence
generated BPF trampoline is re-generated every time new program is attached or
detached to maintain maximum performance.

To avoid the high cost of retpoline the attached BPF programs are called
directly. __bpf_prog_enter/exit() are used to support per-program execution
stats.  In the future this logic will be optimized further by adding support
for bpf_stats_enabled_key inside generated assembly code. Introduction of
preemptible and sleepable BPF programs will completely remove the need to call
to __bpf_prog_enter/exit().

Detach of a BPF program from the trampoline should not fail. To avoid memory
allocation in detach path the half of the page is used as a reserve and flipped
after each attach/detach. 2k bytes is enough to call 40+ BPF programs directly
which is enough for BPF tracing use cases. This limit can be increased in the
future.

BPF_TRACE_FENTRY programs have access to raw kernel function arguments while
BPF_TRACE_FEXIT programs have access to kernel return value as well. Often
kprobe BPF program remembers function arguments in a map while kretprobe
fetches arguments from a map and analyzes them together with return value.
BPF_TRACE_FEXIT accelerates this typical use case.

Recursion prevention for kprobe BPF programs is done via per-cpu
bpf_prog_active counter. In practice that turned out to be a mistake. It
caused programs to randomly skip execution. The tracing tools missed results
they were looking for. Hence BPF trampoline doesn't provide builtin recursion
prevention. It's a job of BPF program itself and will be addressed in the
follow up patches.

BPF trampoline is intended to be used beyond tracing and fentry/fexit use cases
in the future. For example to remove retpoline cost from XDP programs.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-5-ast@kernel.org

Add bpf_arch_text_poke() helper that is used by BPF trampoline logic to patch
nops/calls in kernel text into calls into BPF trampoline and to patch
calls/nops inside BPF programs too.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-4-ast@kernel.org

Refactor x86 JITing of LDX, STX, CALL instructions into separate helper
functions.  No functional changes in LDX and STX helpers.  There is a minor
change in CALL helper. It will populate target address correctly on the first
pass of JIT instead of second pass. That won't reduce total number of JIT
passes though.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-3-ast@kernel.org

In preparation for static_call and variable size jump_label support,
teach text_poke_bp() to emulate instructions, namely:

  JMP32, JMP8, CALL, NOP2, NOP_ATOMIC5, INT3

The current text_poke_bp() takes a @handler argument which is used as
a jump target when the temporary INT3 is hit by a different CPU.

When patching CALL instructions, this doesn't work because we'd miss
the PUSH of the return address. Instead, teach poke_int3_handler() to
emulate an instruction, typically the instruction we're patching in.

This fits almost all text_poke_bp() users, except
arch_unoptimize_kprobe() which restores random text, and for that site
we have to build an explicit emulate instruction.
Tested-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191111132457.529086974@infradead.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>
(cherry picked from commit 8c7eebc10687af45ac8e40ad1bac0cf7893dba9f)
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The example code for the x86_64 JIT uses the wrong arguments when
calling function bar().
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191114034351.162740-1-maowenan@huawei.com

Commit 743e568c (samples/bpf: Add a "force" flag to XDP samples)
introduced the '-F' option but missed adding it to the usage() and the
'long_option' array.

Fixes: 743e568c (samples/bpf: Add a "force" flag to XDP samples)
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191114162847.221770-2-andre.guedes@intel.com

The '-f' option is shown twice in the usage(). This patch removes the
outdated version.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191114162847.221770-1-andre.guedes@intel.com

The upcoming s390 branch length extension patches rely on "passes do
not increase code size" property in order to consistently choose between
short and long branches. Currently this property does not hold between
the first and the second passes for register save/restore sequences, as
well as various code fragments that depend on SEEN_* flags.

Generate the code during the first pass conservatively: assume register
save/restore sequences have the maximum possible length, and that all
SEEN_* flags are set.

Also refuse to JIT if this happens anyway (e.g. due to a bug), as this
might lead to verifier bypass once long branches are introduced.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191114151820.53222-1-iii@linux.ibm.com

Currently passing alignment greater than 4 to bpf_jit_binary_alloc does
not work: in such cases it silently aligns only to 4 bytes.

On s390, in order to load a constant from memory in a large (>512k) BPF
program, one must use lgrl instruction, whose memory operand must be
aligned on an 8-byte boundary.

This patch makes it possible to request 8-byte alignment from
bpf_jit_binary_alloc, and also makes it issue a warning when an
unsupported alignment is requested.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191115123722.58462-1-iii@linux.ibm.com

When installing kselftests to its own directory and run the
test_lwt_ip_encap.sh it will complain that test_lwt_ip_encap.o can't be
found. Same with the test_tc_edt.sh test it will complain that
test_tc_edt.o can't be found.

  $ ./test_lwt_ip_encap.sh
  starting egress IPv4 encap test
  Error opening object test_lwt_ip_encap.o: No such file or directory
  Object hashing failed!
  Cannot initialize ELF context!
  Failed to parse eBPF program: Invalid argument

Rework to add test_lwt_ip_encap.o and test_tc_edt.o to TEST_FILES so the
object file gets installed when installing kselftest.

Fixes: 74b5a596 ("selftests/bpf: Replace test_progs and test_maps w/ general rule")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191111161728.8854-1-anders.roxell@linaro.org

With latest llvm compiler, running test_progs will have the following
verifier failure for test_sysctl_loop1.o:

  libbpf: load bpf program failed: Permission denied
  libbpf: -- BEGIN DUMP LOG ---
  libbpf:
  invalid indirect read from stack var_off (0x0; 0xff)+196 size 7
  ...
  libbpf: -- END LOG --
  libbpf: failed to load program 'cgroup/sysctl'
  libbpf: failed to load object 'test_sysctl_loop1.o'

The related bytecode looks as below:

  0000000000000308 LBB0_8:
      97:       r4 = r10
      98:       r4 += -288
      99:       r4 += r7
     100:       w8 &= 255
     101:       r1 = r10
     102:       r1 += -488
     103:       r1 += r8
     104:       r2 = 7
     105:       r3 = 0
     106:       call 106
     107:       w1 = w0
     108:       w1 += -1
     109:       if w1 > 6 goto -24 <LBB0_5>
     110:       w0 += w8
     111:       r7 += 8
     112:       w8 = w0
     113:       if r7 != 224 goto -17 <LBB0_8>

And source code:

     for (i = 0; i < ARRAY_SIZE(tcp_mem); ++i) {
             ret = bpf_strtoul(value + off, MAX_ULONG_STR_LEN, 0,
                               tcp_mem + i);
             if (ret <= 0 || ret > MAX_ULONG_STR_LEN)
                     return 0;
             off += ret & MAX_ULONG_STR_LEN;
     }

Current verifier is not able to conclude that register w0 before '+'
at insn 110 has a range of 1 to 7 and thinks it is from 0 - 255. This
leads to more conservative range for w8 at insn 112, and later verifier
complaint.

Let us workaround this issue until we found a compiler and/or verifier
solution. The workaround in this patch is to make variable 'ret' volatile,
which will force a reload and then '&' operation to ensure better value
range. With this patch, I got the below byte code for the loop:

  0000000000000328 LBB0_9:
     101:       r4 = r10
     102:       r4 += -288
     103:       r4 += r7
     104:       w8 &= 255
     105:       r1 = r10
     106:       r1 += -488
     107:       r1 += r8
     108:       r2 = 7
     109:       r3 = 0
     110:       call 106
     111:       *(u32 *)(r10 - 64) = r0
     112:       r1 = *(u32 *)(r10 - 64)
     113:       if w1 s< 1 goto -28 <LBB0_5>
     114:       r1 = *(u32 *)(r10 - 64)
     115:       if w1 s> 7 goto -30 <LBB0_5>
     116:       r1 = *(u32 *)(r10 - 64)
     117:       w1 &= 7
     118:       w1 += w8
     119:       r7 += 8
     120:       w8 = w1
     121:       if r7 != 224 goto -21 <LBB0_9>

Insn 117 did the '&' operation and we got more precise value range
for 'w8' at insn 120. The test is happy then:

  #3/17 test_sysctl_loop1.o:OK
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191107170045.2503480-1-yhs@fb.com

Magnus Karlsson says:

====================
This patch set extends libbpf and the xdpsock sample program to
demonstrate the shared umem mode (XDP_SHARED_UMEM) as well as Rx-only
and Tx-only sockets. This in order for users to have an example to use
as a blue print and also so that these modes will be exercised more
frequently.

Note that the user needs to supply an XDP program with the
XDP_SHARED_UMEM mode that distributes the packets over the sockets
according to some policy. There is an example supplied with the
xdpsock program, but there is no default one in libbpf similarly to
when XDP_SHARED_UMEM is not used. The reason for this is that I felt
that supplying one that would work for all users in this mode is
futile. There are just tons of ways to distribute packets, so whatever
I come up with and build into libbpf would be wrong in most cases.

This patch has been applied against commit 30ee348c ("Merge branch 'bpf-libbpf-fixes'")

Structure of the patch set:

Patch 1: Adds shared umem support to libbpf
Patch 2: Shared umem support and example XPD program added to xdpsock sample
Patch 3: Adds Rx-only and Tx-only support to libbpf
Patch 4: Uses Rx-only sockets for rxdrop and Tx-only sockets for txpush in
         the xdpsock sample
Patch 5: Add documentation entries for these two features
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add more documentation about the new Rx-only and Tx-only sockets in
libbpf and also how libbpf can now support shared umems. Also found
two pieces that could be improved in the text, that got fixed in this
commit.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: William Tu <u9012063@gmail.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1573148860-30254-6-git-send-email-magnus.karlsson@intel.com

Use Rx-only sockets for the rxdrop sample and Tx-only sockets for the
txpush sample in the xdpsock application. This so that we exercise and
show case these socket types too.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: William Tu <u9012063@gmail.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1573148860-30254-5-git-send-email-magnus.karlsson@intel.com

The libbpf AF_XDP code is extended to allow for the creation of Rx
only or Tx only sockets. Previously it returned an error if the socket
was not initialized for both Rx and Tx.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: William Tu <u9012063@gmail.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1573148860-30254-4-git-send-email-magnus.karlsson@intel.com

Add support for the XDP_SHARED_UMEM mode to the xdpsock sample
application. As libbpf does not have a built in XDP program for this
mode, we use an explicitly loaded XDP program. This also serves as an
example on how to write your own XDP program that can route to an
AF_XDP socket.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: William Tu <u9012063@gmail.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1573148860-30254-3-git-send-email-magnus.karlsson@intel.com

Add support in libbpf to create multiple sockets that share a single
umem. Note that an external XDP program need to be supplied that
routes the incoming traffic to the desired sockets. So you need to
supply the libbpf_flag XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD and load
your own XDP program.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: William Tu <u9012063@gmail.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1573148860-30254-2-git-send-email-magnus.karlsson@intel.com

Toke Høiland-Jørgensen says:

====================
This series fixes a few bugs in libbpf that I discovered while playing around
with the new auto-pinning code, and writing the first utility in xdp-tools[0]:

- If object loading fails, libbpf does not clean up the pinnings created by the
  auto-pinning mechanism.
- EPERM is not propagated to the caller on program load
- Netlink functions write error messages directly to stderr

In addition, libbpf currently only has a somewhat limited getter function for
XDP link info, which makes it impossible to discover whether an attached program
is in SKB mode or not. So the last patch in the series adds a new getter for XDP
link info which returns all the information returned via netlink (and which can
be extended later).

Finally, add a getter for BPF program size, which can be used by the caller to
estimate the amount of locked memory needed to load a program.

A selftest is added for the pinning change, while the other features were tested
in the xdp-filter tool from the xdp-tools repo. The 'new-libbpf-features' branch
contains the commits that make use of the new XDP getter and the corrected EPERM
error code.

[0] https://github.com/xdp-project/xdp-tools

Changelog:

v4:
  - Don't do any size checks on struct xdp_info, just copy (and/or zero)
    whatever size the caller supplied.

v3:
  - Pass through all kernel error codes on program load (instead of just EPERM).
  - No new bpf_object__unload() variant, just do the loop at the caller
  - Don't reject struct xdp_info sizes that are bigger than what we expect.
  - Add a comment noting that bpf_program__size() returns the size in bytes

v2:
  - Keep function names in libbpf.map sorted properly
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This adds a new getter for the BPF program size (in bytes). This is useful
for a caller that is trying to predict how much memory will be locked by
loading a BPF object into the kernel.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/157333185272.88376.10996937115395724683.stgit@toke.dk

Currently, libbpf only provides a function to get a single ID for the XDP
program attached to the interface. However, it can be useful to get the
full set of program IDs attached, along with the attachment mode, in one
go. Add a new getter function to support this, using an extendible
structure to carry the information. Express the old bpf_get_link_id()
function in terms of the new function.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157333185164.88376.7520653040667637246.stgit@toke.dk

The netlink functions were using fprintf(stderr, ) directly to print out
error messages, instead of going through the usual logging macros. This
makes it impossible for the calling application to silence or redirect
those error messages. Fix this by switching to pr_warn() in nlattr.c and
netlink.c.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/157333185055.88376.15999360127117901443.stgit@toke.dk

When loading an eBPF program, libbpf overrides the return code for EPERM
errors instead of returning it to the caller. This makes it hard to figure
out what went wrong on load.

In particular, EPERM is returned when the system rlimit is too low to lock
the memory required for the BPF program. Previously, this was somewhat
obscured because the rlimit error would be hit on map creation (which does
return it correctly). However, since maps can now be reused, object load
can proceed all the way to loading programs without hitting the error;
propagating it even in this case makes it possible for the caller to react
appropriately (and, e.g., attempt to raise the rlimit before retrying).
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/157333184946.88376.11768171652794234561.stgit@toke.dk

This add tests for the different variations of automatic map unpinning on
load failure.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/157333184838.88376.8243704248624814775.stgit@toke.dk

Since the automatic map-pinning happens during load, it will leave pinned
maps around if the load fails at a later stage. Fix this by unpinning any
pinned maps on cleanup. To avoid unpinning pinned maps that were reused
rather than newly pinned, add a new boolean property on struct bpf_map to
keep track of whether that map was reused or not; and only unpin those maps
that were not reused.

Fixes: 57a00f41 ("libbpf: Add auto-pinning of maps when loading BPF objects")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/157333184731.88376.9992935027056165873.stgit@toke.dk

Since, the new syntax of BTF-defined map has been introduced,
the syntax for using maps under samples directory are mixed up.
For example, some are already using the new syntax, and some are using
existing syntax by calling them as 'legacy'.

As stated at commit abd29c93 ("libbpf: allow specifying map
definitions using BTF"), the BTF-defined map has more compatablility
with extending supported map definition features.

The commit doesn't replace all of the map to new BTF-defined map,
because some of the samples still use bpf_load instead of libbpf, which
can't properly create BTF-defined map.

This will only updates the samples which uses libbpf API for loading bpf
program. (ex. bpf_prog_load_xattr)
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Currently, under samples, several methods are being used to load bpf
program.

Since using libbpf is preferred solution, lots of previously used
'load_bpf_file' from bpf_load are replaced with 'bpf_prog_load_xattr'
from libbpf.

But some of the error messages still show up as 'load_bpf_file' instead
of 'bpf_prog_load_xattr'.

This commit fixes outdated errror messages under samples and fixes some
code style issues.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191107005153.31541-2-danieltimlee@gmail.com

Access the skb->cb[] in the kfree_skb test.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191107180905.4097871-1-kafai@fb.com

This patch adds array support to btf_struct_access().
It supports array of int, array of struct and multidimensional
array.

It also allows using u8[] as a scratch space.  For example,
it allows access the "char cb[48]" with size larger than
the array's element "char".  Another potential use case is
"u64 icsk_ca_priv[]" in the tcp congestion control.

btf_resolve_size() is added to resolve the size of any type.
It will follow the modifier if there is any.  Please
see the function comment for details.

This patch also adds the "off < moff" check at the beginning
of the for loop.  It is to reject cases when "off" is pointing
to a "hole" in a struct.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191107180903.4097702-1-kafai@fb.com

Andrii Nakryiko says:

====================
Github's mirror of libbpf got LGTM and Coverity statis analysis running
against it and spotted few real bugs and few potential issues. This patch
series fixes found issues.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

If we get ELF file with "maps" section, but no symbols pointing to it, we'll
end up with division by zero. Add check against this situation and exit early
with error. Found by Coverity scan against Github libbpf sources.

Fixes: bf829271 ("libbpf: refactor map initialization")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-6-andriin@fb.com

Perform size check always in btf__resolve_size. Makes the logic a bit more
robust against corrupted BTF and silences LGTM/Coverity complaining about
always true (size < 0) check.

Fixes: 69eaab04 ("btf: extract BTF type size calculation")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-5-andriin@fb.com

Fix few issues found by Coverity and LGTM.

Fixes: b053b439 ("bpf: libbpf: bpftool: Print bpf_line_info during prog dump")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-4-andriin@fb.com

Fix a potential overflow issue found by LGTM analysis, based on Github libbpf
source code.

Fixes: 3d650141 ("bpf: libbpf: Add btf_line_info support to libbpf")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-3-andriin@fb.com

Coverity scan against Github libbpf code found the issue of not freeing memory and
leaving already freed memory still referenced from bpf_program. Fix it by
re-assigning successfully reallocated memory sooner.

Fixes: 2993e051 ("tools/bpf: add support to read .BTF.ext sections")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191107020855.3834758-2-andriin@fb.com