- 06 Feb, 2019 10 commits
-
-
Aya Levin authored
[ Upstream commit 9d2cbdc5 ] Prior to this patch the driver prohibited spoof checking on invalid MAC. Now the user can set this configuration if it wishes to. This is required since libvirt might invalidate the VF Mac by setting it to zero, while spoofcheck is ON. Fixes: 1ab2068a ("net/mlx5: Implement vports admin state backup/restore") Signed-off-by:
Aya Levin <ayal@mellanox.com> Reviewed-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Thore authored
[ Upstream commit e15aa3b2 ] After a timeout event caused by for example a broadcast storm, when the MAC and PHY are reset, the BQL TX queue needs to be reset as well. Otherwise, the device will exhibit severe performance issues even after the storm has ended. Co-authored-by:
David Gounaris <david.gounaris@infinera.com> Signed-off-by:
Mathias Thore <mathias.thore@infinera.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Josh Elsasser authored
[ Upstream commit 35edfdc7 ] Assign a default net namespace to netdevs created by init_dummy_netdev(). Fixes a NULL pointer dereference caused by busy-polling a socket bound to an iwlwifi wireless device, which bumps the per-net BUSYPOLLRXPACKETS stat if napi_poll() received packets: BUG: unable to handle kernel NULL pointer dereference at 0000000000000190 IP: napi_busy_loop+0xd6/0x200 Call Trace: sock_poll+0x5e/0x80 do_sys_poll+0x324/0x5a0 SyS_poll+0x6c/0xf0 do_syscall_64+0x6b/0x1f0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 7db6b048 ("net: Commonize busy polling code to focus on napi_id instead of socket") Signed-off-by:
Josh Elsasser <jelsasser@appneta.com> Signed-off-by:
-
Bernard Pidoux authored
[ Upstream commit b0cf0292 ] When an internally generated frame is handled by rose_xmit(), rose_route_frame() is called: if (!rose_route_frame(skb, NULL)) { dev_kfree_skb(skb); stats->tx_errors++; return NETDEV_TX_OK; } We have the same code sequence in Net/Rom where an internally generated frame is handled by nr_xmit() calling nr_route_frame(skb, NULL). However, in this function NULL argument is tested while it is not in rose_route_frame(). Then kernel panic occurs later on when calling ax25cmp() with a NULL ax25_cb argument as reported many times and recently with syzbot. We need to test if ax25 is NULL before using it. Testing: Built kernel with CONFIG_ROSE=y. Signed-off-by:
Bernard Pidoux <f6bvp@free.fr> Acked-by:
Dmitry Vyukov <dvyukov@google.com> Reported-by: syzbot+1a2c456a1ea08fa5b5f7@syzkaller.appspotmail.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Bernard Pidoux <f6bvp@free.fr> Cc: linux-hams@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Cong Wang authored
[ Upstream commit 63346650 ] sk_reset_timer() and sk_stop_timer() properly handle sock refcnt for timer function. Switching to them could fix a refcounting bug reported by syzbot. Reported-and-tested-by: syzbot+defa700d16f1bd1b9a05@syzkaller.appspotmail.com Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-hams@vger.kernel.org Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Aya Levin authored
[ Upstream commit a40ded60 ] Driver reads the query HCA capabilities without the corresponding masks. Without the correct masks, the base addresses of the queues are unaligned. In addition some reserved bits were wrongly read. Using the correct masks, ensures alignment of the base addresses and allows future firmware versions safe use of the reserved bits. Fixes: ab9c17a0 ("mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet") Fixes: 0ff1fb65 ("{NET, IB}/mlx4: Add device managed flow steering firmware API") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Jacob Wen authored
[ Upstream commit 91c52470 ] The size of L2TPv2 header with all optional fields is 14 bytes. l2tp_udp_recv_core only moves 10 bytes to the linear part of a skb. This may lead to l2tp_recv_common read data outside of a skb. This patch make sure that there is at least 14 bytes in the linear part of a skb to meet the maximum need of l2tp_udp_recv_core and l2tp_recv_common. The minimum size of both PPP HDLC-like frame and Ethernet frame is larger than 14 bytes, so we are safe to do so. Also remove L2TP_HDR_SIZE_NOSEQ, it is unused now. Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Suggested-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
Jacob Wen <jian.w.wen@oracle.com> Acked-by:
-
Yohei Kanemaru authored
[ Upstream commit ef489749 ] skb->cb may contain data from previous layers (in an observed case IPv4 with L3 Master Device). In the observed scenario, the data in IPCB(skb)->frags was misinterpreted as IP6CB(skb)->frag_max_size, eventually caused an unexpected IPv6 fragmentation in ip6_fragment() through ip6_finish_output(). This patch clears IP6CB(skb), which potentially contains garbage data, on the SRH ip4ip6 encapsulation. Fixes: 32d99d0b ("ipv6: sr: add support for ip4ip6 encapsulation") Signed-off-by:
Yohei Kanemaru <yohei.kanemaru@gmail.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit c5ee0663 ] IPv6 does not consider if the socket is bound to a device when binding to an address. The result is that a socket can be bound to eth0 and then bound to the address of eth1. If the device is a VRF, the result is that a socket can only be bound to an address in the default VRF. Resolve by considering the device if sk_bound_dev_if is set. This problem exists from the beginning of git history. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
ade44640 ("net: ipv4: do not handle duplicate fragments as overlapping") was backported to many stable trees, but it had a problem that was "accidentally" fixed by the upstream commit 0ff89efb ("ip: fail fast on IP defrag errors") This is the fixup for that problem as we do not want the larger patch in the older stable trees. Fixes: ade44640 ("net: ipv4: do not handle duplicate fragments as overlapping") Reported-by:
Ivan Babrou <ivan@cloudflare.com> Reported-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
- 31 Jan, 2019 30 commits
-
-
Greg Kroah-Hartman authored
-
Anand Jain authored
commit 0d228ece upstream. At the time of forced unmount we place the running replace to BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED state, so when the system comes back and expect the target device is missing. Then let the replace state continue to be in BTRFS_IOCTL_DEV_REPLACE_STATE_SUSPENDED state instead of BTRFS_IOCTL_DEV_REPLACE_STATE_STARTED as there isn't any matching scrub running as part of replace. Fixes: e93c89c1 ("Btrfs: add new sources for device replace code") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Jeff Mahoney authored
commit 5c061471 upstream. When we fail to start a transaction in btrfs_dev_replace_start, we leave dev_replace->replace_start set to STARTED but clear ->srcdev and ->tgtdev. Later, that can result in an Oops in btrfs_dev_replace_progress when having state set to STARTED or SUSPENDED implies that ->srcdev is valid. Also fix error handling when the state is already STARTED or SUSPENDED while starting. That, too, will clear ->srcdev and ->tgtdev even though it doesn't own them. This should be an impossible case to hit since we should be protected by the BTRFS_FS_EXCL_OP bit being set. Let's add an ASSERT there while we're at it. Fixes: e93c89c1 (Btrfs: add new sources for device replace code) CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Reviewed-by:
-
Pan Bian authored
commit 0ea295dd upstream. The function truncate_node frees the page with f2fs_put_page. However, the page index is read after that. So, the patch reads the index before freeing the page. Fixes: bf39c00a ("f2fs: drop obsolete node page when it is truncated") Cc: <stable@vger.kernel.org> Signed-off-by:
Pan Bian <bianpan2016@163.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Juergen Gross authored
commit 867cefb4 upstream. Commit f94c8d11 ("sched/clock, x86/tsc: Rework the x86 'unstable' sched_clock() interface") broke Xen guest time handling across migration: [ 187.249951] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 187.251137] OOM killer disabled. [ 187.251137] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 187.252299] suspending xenstore... [ 187.266987] xen:grant_table: Grant tables using version 1 layout [18446743811.706476] OOM killer enabled. [18446743811.706478] Restarting tasks ... done. [18446743811.720505] Setting capacity to 16777216 Fix that by setting xen_sched_clock_offset at resume time to ensure a monotonic clock value. [boris: replaced pr_info() with pr_info_once() in xen_callback_vector() to avoid printing with incorrect timestamp during resume (as we haven't re-adjusted the clock yet)] Fixes: f94c8d11 ("sched/clock, x86/tsc: Rework the x86 'unstable' sched_clock() interface") Cc: <stable@vger.kernel.org> # 4.11 Reported-by:
Hans van Kranenburg <hans.van.kranenburg@mendix.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Tested-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Pavel Tatashin authored
commit 38669ba2 upstream. It is expected for sched_clock() to output data from 0, when system boots. Add an offset xen_sched_clock_offset (similarly how it is done in other hypervisors i.e. kvm_sched_clock_offset) to count sched_clock() from 0, when time is first initialized. Signed-off-by:
Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-14-pasha.tatashin@oracle.comSigned-off-by:
-
Joao Martins authored
commit 2229f70b upstream. In order to support pvclock vdso on xen we need to setup the time info page for vcpu 0 and register the page with Xen using the VCPUOP_register_vcpu_time_memory_area hypercall. This hypercall will also forcefully update the pvti which will set some of the necessary flags for vdso. Afterwards we check if it supports the PVCLOCK_TSC_STABLE_BIT flag which is mandatory for having vdso/vsyscall support. And if so, it will set the cpu 0 pvti that will be later on used when mapping the vdso image. The xen headers are also updated to include the new hypercall for registering the secondary vcpu_time_info struct. Signed-off-by:
Joao Martins <joao.m.martins@oracle.com> Reviewed-by:
-
Joao Martins authored
commit b8888080 upstream. Specifically check for PVCLOCK_TSC_STABLE_BIT and if this bit is set, then set it too on pvclock flags. This allows Xen clocksource to use it and thus speeding up xen_clocksource_read() callers (i.e. sched_clock()) Signed-off-by:
-
Joao Martins authored
commit 9f08890a upstream. Right now there is only a pvclock_pvti_cpu0_va() which is defined on kvmclock since: commit dac16fba ("x86/vdso: Get pvclock data from the vvar VMA instead of the fixmap") The only user of this interface so far is kvm. This commit adds a setter function for the pvti page and moves pvclock_pvti_cpu0_va to pvclock, which is a more generic place to have it; and would allow other PV clocksources to use it, such as Xen. While moving pvclock_pvti_cpu0_va into pvclock, rename also this function to pvclock_get_pvti_cpu0_va (including its call sites) to be symmetric with the setter (pvclock_set_pvti_cpu0_va). Signed-off-by:
Andy Lutomirski <luto@kernel.org> Acked-by:
Paolo Bonzini <pbonzini@redhat.com> Acked-by:
-
Joao Martins authored
commit 001f60e1 upstream. In the event of moving pvclock_pvti_cpu0_va() definition to common pvclock code, this function would return a value on non KVM guests. Later on this would fail with a GPF on ptp_kvm_init when running on a Xen guest. Therefore, ptp_kvm_init() should check whether it is running in a KVM guest. Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Mathias Nyman authored
commit f0680904 upstream. Ensure that the shared_hcd pointer is valid when calling usb_put_hcd() The shared_hcd is removed and freed in xhci by first calling usb_remove_hcd(xhci->shared_hcd), and later usb_put_hcd(xhci->shared_hcd) Afer commit fe190ed0 ("xhci: Do not halt the host until both HCD have disconnected their devices.") the shared_hcd was never properly put as xhci->shared_hcd was set to NULL before usb_put_hcd(xhci->shared_hcd) was called. shared_hcd (USB3) is removed before primary hcd (USB2). While removing the primary hcd we might need to handle xhci interrupts to cleanly remove last USB2 devices, therefore we need to set xhci->shared_hcd to NULL before removing the primary hcd to let xhci interrupt handler know shared_hcd is no longer available. xhci-plat.c, xhci-histb.c and xhci-mtk first create both their hcd's before adding them. so to keep the correct reverse removal order use a temporary shared_hcd variable for them. For more details see commit 4ac53087 ("usb: xhci: plat: Create both HCDs before adding them") Fixes: fe190ed0 ("xhci: Do not halt the host until both HCD have disconnected their devices.") Cc: Joel Stanley <joel@jms.id.au> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Jianguo Sun <sunjianguo1@huawei.com> Cc: <stable@vger.kernel.org> Reported-by:
Jack Pham <jackp@codeaurora.org> Tested-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Jack Pham authored
commit bd674224 upstream. OUT endpoint requests may somtimes have this flag set when preparing to be submitted to HW indicating that there is an additional TRB chained to the request for alignment purposes. If that request is removed before the controller can execute the transfer (e.g. ep_dequeue/ep_disable), the request will not go through the dwc3_gadget_ep_cleanup_completed_request() handler and will not have its needs_extra_trb flag cleared when dwc3_gadget_giveback() is called. This same request could be later requeued for a new transfer that does not require an extra TRB and if it is successfully completed, the cleanup and TRB reclamation will incorrectly process the additional TRB which belongs to the next request, and incorrectly advances the TRB dequeue pointer, thereby messing up calculation of the next requeust's actual/remaining count when it completes. The right thing to do here is to ensure that the flag is cleared before it is given back to the function driver. A good place to do that is in dwc3_gadget_del_and_unmap_request(). Fixes: c6267a51 ("usb: dwc3: gadget: align transfers to wMaxPacketSize") Cc: stable@vger.kernel.org Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> [jackp: backport to <= 4.20: replaced 'needs_extra_trb' with 'unaligned' and 'zero' members in patch and reworded commit text] Signed-off-by:
-
Raju Rangoju authored
commit 5cbab630 upstream. Under heavy load if we don't have any pre-allocated rsps left, we dynamically allocate a rsp, but we are not actually allocating memory for nvme_completion (rsp->req.rsp). In such a case, accessing pointer fields (req->rsp->status) in nvmet_req_init() will result in crash. To fix this, allocate the memory for nvme_completion by calling nvmet_rdma_alloc_rsp() Fixes: 8407879c("nvmet-rdma:fix possible bogus dereference under heavy load") Cc: <stable@vger.kernel.org> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Raju Rangoju <rajur@chelsio.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Israel Rukshin authored
commit ad1f8249 upstream. Signed-off-by:
Israel Rukshin <israelr@mellanox.com> Reviewed-by:
-
David Hildenbrand authored
commit 60f1bf29 upstream. When calling smp_call_ipl_cpu() from the IPL CPU, we will try to read from pcpu_devices->lowcore. However, due to prefixing, that will result in reading from absolute address 0 on that CPU. We have to go via the actual lowcore instead. This means that right now, we will read lc->nodat_stack == 0 and therfore work on a very wrong stack. This BUG essentially broke rebooting under QEMU TCG (which will report a low address protection exception). And checking under KVM, it is also broken under KVM. With 1 VCPU it can be easily triggered. :/# echo 1 > /proc/sys/kernel/sysrq :/# echo b > /proc/sysrq-trigger [ 28.476745] sysrq: SysRq : Resetting [ 28.476793] Kernel stack overflow. [ 28.476817] CPU: 0 PID: 424 Comm: sh Not tainted 5.0.0-rc1+ #13 [ 28.476820] Hardware name: IBM 2964 NE1 716 (KVM/Linux) [ 28.476826] Krnl PSW : 0400c00180000000 0000000000115c0c (pcpu_delegate+0x12c/0x140) [ 28.476861] R:0 T:1 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 [ 28.476863] Krnl GPRS: ffffffffffffffff 0000000000000000 000000000010dff8 0000000000000000 [ 28.476864] 0000000000000000 0000000000000000 0000000000ab7090 000003e0006efbf0 [ 28.476864] 000000000010dff8 0000000000000000 0000000000000000 0000000000000000 [ 28.476865] 000000007fffc000 0000000000730408 000003e0006efc58 0000000000000000 [ 28.476887] Krnl Code: 0000000000115bfe: 4170f000 la %r7,0(%r15) [ 28.476887] 0000000000115c02: 41f0a000 la %r15,0(%r10) [ 28.476887] #0000000000115c06: e370f0980024 stg %r7,152(%r15) [ 28.476887] >0000000000115c0c: c0e5fffff86e brasl %r14,114ce8 [ 28.476887] 0000000000115c12: 41f07000 la %r15,0(%r7) [ 28.476887] 0000000000115c16: a7f4ffa8 brc 15,115b66 [ 28.476887] 0000000000115c1a: 0707 bcr 0,%r7 [ 28.476887] 0000000000115c1c: 0707 bcr 0,%r7 [ 28.476901] Call Trace: [ 28.476902] Last Breaking-Event-Address: [ 28.476920] [<0000000000a01c4a>] arch_call_rest_init+0x22/0x80 [ 28.476927] Kernel panic - not syncing: Corrupt kernel stack, can't continue. [ 28.476930] CPU: 0 PID: 424 Comm: sh Not tainted 5.0.0-rc1+ #13 [ 28.476932] Hardware name: IBM 2964 NE1 716 (KVM/Linux) [ 28.476932] Call Trace: Fixes: 2f859d0d ("s390/smp: reduce size of struct pcpu") Cc: stable@vger.kernel.org # 4.0+ Reported-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Sean Christopherson authored
Upstream commit: f775b13e ("x86,kvm: move qemu/guest FPU switching out to vcpu_run") introduced a bug, which was later fixed by upstream commit: 5663d8f9 ("kvm: x86: fix WARN due to uninitialized guest FPU state") For reasons unknown, both commits were initially passed-over for inclusion in the 4.14 stable branch despite being tagged for stable. Eventually, someone noticed that the fixup, commit 5663d8f9, was missing from stable[1], and so it was queued up for 4.14 and included in release v4.14.79. Even later, the original buggy patch, commit f775b13e, was also applied to the 4.14 stable branch. Through an unlucky coincidence, the incorrect ordering did not generate a conflict between the two patches, and led to v4.14.94 and later releases containing a spurious call to kvm_load_guest_fpu() in kvm_arch_vcpu_ioctl_run(). As a result, KVM may reload stale guest FPU state, e.g. after accepting in INIT event. This can manifest as crashes during boot, segfaults, failed checksums and so on and so forth. Remove the unwanted kvm_{load,put}_guest_fpu() calls, i.e. make kvm_arch_vcpu_ioctl_run() look like commit 5663d8f9 was backported after commit f775b13e. [1] https://www.spinics.net/lists/stable/msg263931.html Fixes: 4124a4cf ("x86,kvm: move qemu/guest FPU switching out to vcpu_run") Cc: stable@vger.kernel.org Cc: Sasha Levin <sashal@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Reported-by: Roman Mamedov Reported-by:Thomas Lindroth <thomas.lindroth@gmail.com> Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Acked-by:
-
Jose Abreu authored
commit 52a76235 upstream. Currently we are using all the available fifo size in RQS and TQS fields. This will not work correctly in multi-queues IP's because total fifo size must be splitted to the enabled queues. Correct this by computing the available fifo size per queue and setting the right value in TQS and RQS fields. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
-
Sasha Levin authored
This reverts commit e65cd9a2. Tommi T. Rrantala notes: PTRACE_SECCOMP_GET_METADATA was only added in 4.16 (26500475) And it's also breaking seccomp_bpf.c compilation for me: seccomp_bpf.c: In function ‘get_metadata’: seccomp_bpf.c:2878:26: error: storage size of ‘md’ isn’t known struct seccomp_metadata md; Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Milian Wolff authored
[ Upstream commit 1fe627da ] libdwfl parses an ELF file itself and creates mappings for the individual sections. perf on the other hand sees raw mmap events which represent individual sections. When we encounter an address pointing into a mapping with pgoff != 0, we must take that into account and report the file at the non-offset base address. This fixes unwinding with libdwfl in some cases. E.g. for a file like: ``` using namespace std; mutex g_mutex; double worker() { lock_guard<mutex> guard(g_mutex); uniform_real_distribution<double> uniform(-1E5, 1E5); default_random_engine engine; double s = 0; for (int i = 0; i < 1000; ++i) { s += norm(complex<double>(uniform(engine), uniform(engine))); } cout << s << endl; return s; } int main() { vector<std::future<double>> results; for (int i = 0; i < 10000; ++i) { results.push_back(async(launch::async, worker)); } return 0; } ``` Compile it with `g++ -g -O2 -lpthread cpp-locking.cpp -o cpp-locking`, then record it with `perf record --call-graph dwarf -e sched:sched_switch`. When you analyze it with `perf script` and libunwind, you should see: ``` cpp-locking 20038 [005] 54830.236589: sched:sched_switch: prev_comm=cpp-locking prev_pid=20038 prev_prio=120 prev_state=T ==> next_comm=swapper/5 next_pid=0 next_prio=120 ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1670208 schedule+0x28 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb16737cc rwsem_down_read_failed+0xec (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1665e04 call_rwsem_down_read_failed+0x14 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1672a03 down_read+0x13 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb106bd85 __do_page_fault+0x445 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb18015f5 page_fault+0x45 (/lib/modules/4.14.78-1-lts/build/vmlinux) 7f38e4252591 new_heap+0x101 (/usr/lib/libc-2.28.so) 7f38e4252d0b arena_get2.part.4+0x2fb (/usr/lib/libc-2.28.so) 7f38e4255b1c tcache_init.part.6+0xec (/usr/lib/libc-2.28.so) 7f38e42569e5 __GI___libc_malloc+0x115 (inlined) 7f38e4241790 __GI__IO_file_doallocate+0x90 (inlined) 7f38e424fbbf __GI__IO_doallocbuf+0x4f (inlined) 7f38e424ee47 __GI__IO_file_overflow+0x197 (inlined) 7f38e424df36 _IO_new_file_xsputn+0x116 (inlined) 7f38e4242bfb __GI__IO_fwrite+0xdb (inlined) 7f38e463fa6d std::basic_streambuf<char, std::char_traits<char> >::sputn(char const*, long)+0x1cd (inlined) 7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> >::_M_put(char const*, long)+0x1cd (inlined) 7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::__write<char>(std::ostreambuf_iterator<char, std::char_traits<char> >, char const*, int)+0x1cd (inlined) 7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::_M_insert_float<double>(std::ostreambuf_iterator<c> 7f38e464bd70 std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::put(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, double) const+0x90 (inl> 7f38e464bd70 std::ostream& std::ostream::_M_insert<double>(double)+0x90 (/usr/lib/libstdc++.so.6.0.25) 563b9cb502f7 std::ostream::operator<<(double)+0xb7 (inlined) 563b9cb502f7 worker()+0xb7 (/ssd/milian/projects/kdab/rnd/hotspot/build/tests/test-clients/cpp-locking/cpp-locking) 563b9cb506fb double std::__invoke_impl<double, double (*)()>(std::__invoke_other, double (*&&)())+0x2b (inlined) 563b9cb506fb std::__invoke_result<double (*)()>::type std::__invoke<double (*)()>(double (*&&)())+0x2b (inlined) 563b9cb506fb decltype (__invoke((_S_declval<0ul>)())) std::thread::_Invoker<std::tuple<double (*)()> >::_M_invoke<0ul>(std::_Index_tuple<0ul>)+0x2b (inlined) 563b9cb506fb std::thread::_Invoker<std::tuple<double (*)()> >::operator()()+0x2b (inlined) 563b9cb506fb std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<double>, std::__future_base::_Result_base::_Deleter>, std::thread::_Invoker<std::tuple<double (*)()> >, dou> 563b9cb506fb std::_Function_handler<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> (), std::__future_base::_Task_setter<std::unique_ptr<std::__future_> 563b9cb507e8 std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>::operator()() const+0x28 (inlined) 563b9cb507e8 std::__future_base::_State_baseV2::_M_do_set(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*)+0x28 (/ssd/milian/> 7f38e46d24fe __pthread_once_slow+0xbe (/usr/lib/libpthread-2.28.so) 563b9cb51149 __gthread_once+0xe9 (inlined) 563b9cb51149 void std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*)> 563b9cb51149 std::__future_base::_State_baseV2::_M_set_result(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>, bool)+0xe9 (inlined) 563b9cb51149 std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<double (*)()> >&&)::{lambda()#1}::op> 563b9cb51149 void std::__invoke_impl<void, std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<double> 563b9cb51149 std::__invoke_result<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<double (*)()> >> 563b9cb51149 decltype (__invoke((_S_declval<0ul>)())) std::thread::_Invoker<std::tuple<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_> 563b9cb51149 std::thread::_Invoker<std::tuple<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread::_Invoker<std::tuple<dou> 563b9cb51149 std::thread::_State_impl<std::thread::_Invoker<std::tuple<std::__future_base::_Async_state_impl<std::thread::_Invoker<std::tuple<double (*)()> >, double>::_Async_state_impl(std::thread> 7f38e45f0062 execute_native_thread_routine+0x12 (/usr/lib/libstdc++.so.6.0.25) 7f38e46caa9c start_thread+0xfc (/usr/lib/libpthread-2.28.so) 7f38e42ccb22 __GI___clone+0x42 (inlined) ``` Before this patch, using libdwfl, you would see: ``` cpp-locking 20038 [005] 54830.236589: sched:sched_switch: prev_comm=cpp-locking prev_pid=20038 prev_prio=120 prev_state=T ==> next_comm=swapper/5 next_pid=0 next_prio=120 ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1670208 schedule+0x28 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb16737cc rwsem_down_read_failed+0xec (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1665e04 call_rwsem_down_read_failed+0x14 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1672a03 down_read+0x13 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb106bd85 __do_page_fault+0x445 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb18015f5 page_fault+0x45 (/lib/modules/4.14.78-1-lts/build/vmlinux) 7f38e4252591 new_heap+0x101 (/usr/lib/libc-2.28.so) a041161e77950c5c [unknown] ([unknown]) ``` With this patch applied, we get a bit further in unwinding: ``` cpp-locking 20038 [005] 54830.236589: sched:sched_switch: prev_comm=cpp-locking prev_pid=20038 prev_prio=120 prev_state=T ==> next_comm=swapper/5 next_pid=0 next_prio=120 ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb166fec5 __sched_text_start+0x545 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1670208 schedule+0x28 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb16737cc rwsem_down_read_failed+0xec (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1665e04 call_rwsem_down_read_failed+0x14 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb1672a03 down_read+0x13 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb106bd85 __do_page_fault+0x445 (/lib/modules/4.14.78-1-lts/build/vmlinux) ffffffffb18015f5 page_fault+0x45 (/lib/modules/4.14.78-1-lts/build/vmlinux) 7f38e4252591 new_heap+0x101 (/usr/lib/libc-2.28.so) 7f38e4252d0b arena_get2.part.4+0x2fb (/usr/lib/libc-2.28.so) 7f38e4255b1c tcache_init.part.6+0xec (/usr/lib/libc-2.28.so) 7f38e42569e5 __GI___libc_malloc+0x115 (inlined) 7f38e4241790 __GI__IO_file_doallocate+0x90 (inlined) 7f38e424fbbf __GI__IO_doallocbuf+0x4f (inlined) 7f38e424ee47 __GI__IO_file_overflow+0x197 (inlined) 7f38e424df36 _IO_new_file_xsputn+0x116 (inlined) 7f38e4242bfb __GI__IO_fwrite+0xdb (inlined) 7f38e463fa6d std::basic_streambuf<char, std::char_traits<char> >::sputn(char const*, long)+0x1cd (inlined) 7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> >::_M_put(char const*, long)+0x1cd (inlined) 7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::__write<char>(std::ostreambuf_iterator<char, std::char_traits<char> >, char const*, int)+0x1cd (inlined) 7f38e463fa6d std::ostreambuf_iterator<char, std::char_traits<char> > std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::_M_insert_float<double>(std::ostreambuf_iterator<c> 7f38e464bd70 std::num_put<char, std::ostreambuf_iterator<char, std::char_traits<char> > >::put(std::ostreambuf_iterator<char, std::char_traits<char> >, std::ios_base&, char, double) const+0x90 (inl> 7f38e464bd70 std::ostream& std::ostream::_M_insert<double>(double)+0x90 (/usr/lib/libstdc++.so.6.0.25) 563b9cb502f7 std::ostream::operator<<(double)+0xb7 (inlined) 563b9cb502f7 worker()+0xb7 (/ssd/milian/projects/kdab/rnd/hotspot/build/tests/test-clients/cpp-locking/cpp-locking) 6eab825c1ee3e4ff [unknown] ([unknown]) ``` Note that the backtrace is still stopping too early, when compared to the nice results obtained via libunwind. It's unclear so far what the reason for that is. Committer note: Further comment by Milian on the thread started on the Link: tag below: --- The remaining issue is due to a bug in elfutils: https://sourceware.org/ml/elfutils-devel/2018-q4/msg00089.html With both patches applied, libunwind and elfutils produce the same output for the above scenario. --- Signed-off-by:
Milian Wolff <milian.wolff@kdab.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20181029141644.3907-1-milian.wolff@kdab.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Martin Vuille authored
[ Upstream commit 3d20c624 ] Path passed to libdw for unwinding doesn't include symfs path if specified, so unwinding fails because ELF file is not found. Similar to unwinding with libunwind, pass symsrc_filename instead of long_name. If there is no symsrc_filename, fallback to long_name. Signed-off-by:
Martin Vuille <jpmv27@aim.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20180211212420.18388-1-jpmv27@aim.comSigned-off-by:
-
Nicolas Pitre authored
commit 0c9b1965 upstream. User space using poll() on /dev/vcs devices are not awaken when a screen size change occurs. Let's fix that. Signed-off-by:
Nicolas Pitre <nico@linaro.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Oliver Hartkopp authored
commit 93171ba6 upstream. Kyungtae Kim detected a potential integer overflow in bcm_[rx|tx]_setup() when the conversion into ktime multiplies the given value with NSEC_PER_USEC (1000). Reference: https://marc.info/?l=linux-can&m=154732118819828&w=2 Add a check for the given tv_usec, so that the value stays below one second. Additionally limit the tv_sec value to a reasonable value for CAN related use-cases of 400 days and ensure all values to be positive. Reported-by:
Kyungtae Kim <kt0755@gmail.com> Tested-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Andre Naujoks <nautsch2@gmail.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Manfred Schlaegl authored
commit 7b12c818 upstream. This patch revert commit 7da11ba5 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb") After introduction of this change we encountered following new error message on various i.MX plattforms (flexcan): | flexcan 53fc8000.can can0: __can_get_echo_skb: BUG! Trying to echo non | existing skb: can_priv::echo_skb[0] The introduction of the message was a mistake because priv->echo_skb[idx] = NULL is a perfectly valid in following case: If CAN_RAW_LOOPBACK is disabled (setsockopt) in applications, the pkt_type of the tx skb's given to can_put_echo_skb is set to PACKET_LOOPBACK. In this case can_put_echo_skb will not set priv->echo_skb[idx]. It is therefore kept NULL. As additional argument for revert: The order of check and usage of idx was changed. idx is used to access an array element before checking it's boundaries. Signed-off-by:
Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Fixes: 7da11ba5 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Marc Zyngier authored
commit 8208d170 upstream. The way we allocate events works fine in most cases, except when multiple PCI devices share an ITS-visible DevID, and that one of them is trying to use MultiMSI allocation. In that case, our allocation is not guaranteed to be zero-based anymore, and we have to make sure we allocate it on a boundary that is compatible with the PCI Multi-MSI constraints. Fix this by allocating the full region upfront instead of iterating over the number of MSIs. MSI-X are always allocated one by one, so this shouldn't change anything on that front. Fixes: b48ac83d ("irqchip: GICv3: ITS: MSI support") Cc: stable@vger.kernel.org Reported-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Thomas Gleixner authored
commit 93ad0fc0 upstream. The recent commit which prevented a division by 0 issue in the alarm timer code broke posix CPU timers as an unwanted side effect. The reason is that the common rearm code checks for timer->it_interval being 0 now. What went unnoticed is that the posix cpu timer setup does not initialize timer->it_interval as it stores the interval in CPU timer specific storage. The reason for the separate storage is historical as the posix CPU timers always had a 64bit nanoseconds representation internally while timer->it_interval is type ktime_t which used to be a modified timespec representation on 32bit machines. Instead of reverting the offending commit and fixing the alarmtimer issue in the alarmtimer code, store the interval in timer->it_interval at CPU timer setup time so the common code check works. This also repairs the existing inconistency of the posix CPU timer code which kept a single shot timer armed despite of the interval being 0. The separate storage can be removed in mainline, but that needs to be a separate commit as the current one has to be backported to stable kernels. Fixes: 0e334db6 ("posix-timers: Fix division by zero bug") Reported-by:
H.J. Lu <hjl.tools@gmail.com> Signed-off-by:
-
Daniel Drake authored
commit 7e6fc2f5 upstream. The outb() function takes parameters value and port, in that order. Fix the parameters used in the kalsr i8254 fallback code. Fixes: 5bfce5ef ("x86, kaslr: Provide randomness functions") Signed-off-by:
Daniel Drake <drake@endlessm.com> Signed-off-by:
-
Dave Hansen authored
commit e1812933 upstream. There was a bug where the per-mm pkey state was not being preserved across fork() in the child. fork() is performed in the pkey selftests, but all of the pkey activity is performed in the parent. The child does not perform any actions sensitive to pkey state. To make the test more sensitive to these kinds of bugs, add a fork() where the parent exits, and execution continues in the child. To achieve this let the key exhaustion test not terminate at the first allocation failure and fork after 2*NR_PKEYS loops and continue in the child. Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
-
Dave Hansen authored
commit a31e184e upstream. Memory protection key behavior should be the same in a child as it was in the parent before a fork. But, there is a bug that resets the state in the child at fork instead of preserving it. The creation of new mm's is a bit convoluted. At fork(), the code does: 1. memcpy() the parent mm to initialize child 2. mm_init() to initalize some select stuff stuff 3. dup_mmap() to create true copies that memcpy() did not do right For pkeys two bits of state need to be preserved across a fork: 'execute_only_pkey' and 'pkey_allocation_map'. Those are preserved by the memcpy(), but mm_init() invokes init_new_context() which overwrites 'execute_only_pkey' and 'pkey_allocation_map' with "new" values. The author of the code erroneously believed that init_new_context is *only* called at execve()-time. But, alas, init_new_context() is used at execve() and fork(). The result is that, after a fork(), the child's pkey state ends up looking like it does after an execve(), which is totally wrong. pkeys that are already allocated can be allocated again, for instance. To fix this, add code called by dup_mmap() to copy the pkey state from parent to child explicitly. Also add a comment above init_new_context() to make it more clear to the next poor sod what this code is used for. Fixes: e8c24d3a ("x86/pkeys: Allocation/free syscalls") Signed-off-by:
-
Alexander Popov authored
commit 5cc244a2 upstream. The single-step debugging of KVM guests on x86 is broken: if we run gdb 'stepi' command at the breakpoint when the guest interrupts are enabled, RIP always jumps to native_apic_mem_write(). Then other nasty effects follow. Long investigation showed that on Jun 7, 2017 the commit c8401dda ("KVM: x86: fix singlestepping over syscall") introduced the kvm_run.debug corruption: kvm_vcpu_do_singlestep() can be called without X86_EFLAGS_TF set. Let's fix it. Please consider that for -stable. Signed-off-by:
Alexander Popov <alex.popov@linux.com> Cc: stable@vger.kernel.org Fixes: c8401dda ("KVM: x86: fix singlestepping over syscall") Signed-off-by:
-
Milan Broz authored
commit 1856b9f7 upstream. The dm-crypt cipher specification in a mapping table is defined as: cipher[:keycount]-chainmode-ivmode[:ivopts] or (new crypt API format): capi:cipher_api_spec-ivmode[:ivopts] For ESSIV, the parameter includes hash specification, for example: aes-cbc-essiv:sha256 The implementation expected that additional IV option to never include another dash '-' character. But, with SHA3, there are names like sha3-256; so the mapping table parser fails: dmsetup create test --table "0 8 crypt aes-cbc-essiv:sha3-256 9c1185a5c5e9fc54612808977ee8f5b9e 0 /dev/sdb 0" or (new crypt API format) dmsetup create test --table "0 8 crypt capi:cbc(aes)-essiv:sha3-256 9c1185a5c5e9fc54612808977ee8f5b9e 0 /dev/sdb 0" device-mapper: crypt: Ignoring unexpected additional cipher options device-mapper: table: 253:0: crypt: Error creating IV device-mapper: ioctl: error adding target to table Fix the dm-crypt constructor to ignore additional dash in IV options and also remove a bogus warning (that is ignored anyway). Cc: stable@vger.kernel.org # 4.12+ Signed-off-by:
Milan Broz <gmazyland@gmail.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
