- 26 Aug, 2016 1 commit
-
-
Rafał Miłecki authored
In the commit 929e7f3b ("clk: Make of_clk_get_parent_count() return unsigned ints") of_clk_get_parent_count has been modified to return unsigned int. There is also a dummy implementation of the same function for configs without CONFIG_OF. For the consistency it should be updated as well. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
- 25 Aug, 2016 25 commits
-
-
Linus Walleij authored
The Integrator/AP and Integrator/CP have special derivatives of the ICST525 control registers, where some bits have been hardwired but others are possible to adjust, resulting in a control register that makes it possible to set an even, desired megahertz value. The Integrator/AP and Integrator/CP have slightly different layout so we support them using different compatible strings. After adding these clocks, the Integrator-specific cpufreq driver can be switched over to use the generic operating point device tree cpufreq driver. Instead of simply writing a value to the oscillator control register we switch to the more elaborate method of providing a bitmask and use regmap_update_bits() to poke the right bits for the desired frequency, this is needed since these control registers sometimes control more than one clock. Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Linus Walleij authored
The Integrator/AP and Integrator/CP core modules have special versions of the ICST525 interface hardcoding some bits. Create special compatible strings to identify these variants, also explain a bit what is going on. Cc: devicetree@vger.kernel.org Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Srinivas Kandagatla authored
This patch adds missing 2 PCIE common reset lines. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Srinivas Kandagatla authored
This patch corrects the register offset for pcie2 pipe clock. Offset according to datasheet is 0x6e018 instead of 0x6e108. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: b1e010c0 ("clk: qcom: Add MSM8996 Global Clock Control (GCC) driver") Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Srinivas Kandagatla authored
This patch selects QCOM_GDSC Kconfig for msm8996 GCC and MMCC clock controllers, as these provide some of the gdscs on the SOC. Also selecting this config will make it align with other drivers which do the same. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: 52111672 ("clk: qcom: gdsc: Add GDSCs in msm8996 GCC") Fixes: 7e824d50 ("clk: qcom: gdsc: Add mmcc gdscs for msm8996 family") Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
* clk-fixes: clk: tegra: remove TEGRA_PLL_USE_LOCK for PLLD/PLLD2
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: <uclinux-h8-devel@lists.sourceforge.jp> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers in this driver, allowing us to move closer to a clear split of consumer and provider clk APIs. Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Mark Brown <broonie@kernel.org> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Tony Prisk <linux@prisktech.co.nz> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Chris Zhong <zyw@rock-chips.com> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Janusz Uzycki <j.uzycki@elproma.com.pl> Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Daniel Tang <dt.tangr@gmail.com> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Alexander Shiyan <shc_work@mail.ru> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
- 24 Aug, 2016 11 commits
-
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Make thing simple by using the existing clk_hw array and implementing a custom DT clk provider get function to map the clk spec id to a clk_hw pointer. Cc: Anders Berg <anders.berg@lsi.com> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
Now that we can use clk_hw pointers we don't need to have two duplicate arrays holding the same mapping of clk index to clk_hw pointer. Implement a custom clk_hw provider function to map the OF specifier to the clk_hw instance for it. Cc: Alex Elder <elder@linaro.org> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Purna Chandra Mandal authored
Optional SOSC is an external fixed clock running at 32768HZ. So Initialize SOSC rate as per PIC32MZDA datasheet. Signed-off-by:
Purna Chandra Mandal <purna.mandal@microchip.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Purna Chandra Mandal authored
pbclk_set_rate() is using readl_poll_timeout_atomic() even though spinlock is released. Fix it by replacing with readl_poll_timeout(). Signed-off-by:
Purna Chandra Mandal <purna.mandal@microchip.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Vince Hsu authored
Tegra114 has a HW bug that the PLLD/PLLD2 lock bit cannot be asserted when the DIS power domain is during up-powergating process but the clamp to this domain is not removed yet. That causes a timeout and aborts the power sequence, although the PLLD/PLLD2 has already locked. To remove the false alarm, we don't use the lock for PLLD/PLLD2. Just wait 1ms and treat the clocks as locked. Signed-off-by:
Vince Hsu <vinceh@nvidia.com> Tested-by:
Jonathan Hunter <jonathanh@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Stephen Boyd authored
* clk-meson-gxbb-ao: clk: meson: Fix invalid use of sizeof in gxbb_aoclkc_probe()
-
Wei Yongjun authored
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by:
Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Wei Yongjun authored
sizeof() when applied to a pointer typed expression gives the size of the pointer, not that of the pointed data. Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Fixes: f8c11f79 ("clk: meson: Add GXBB AO Clock and Reset controller driver") Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
- 19 Aug, 2016 3 commits
-
-
Rajendra Nayak authored
Add BIMC gdsc data found in MMCC part of msm8996 family of devices. Signed-off-by:
Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Fabio Estevam authored
The SAI_IPG clocks are enabled by the same bits that control SAI_ROOT_CLK clocks, so represent them as shared clocks. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
Fabio Estevam authored
Introduce imx_clk_gate2_shared2() which is similar to the existing imx_clk_gate2_shared() and passes CLK_OPS_PARENT_ENABLE flag, which is useful for i.MX7 shared clocks. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-